Anjing Webshells

Website : rimsha.abasa.com
: / var / lib / dpkg /
Filename : status
back
Package: accountsservice
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 500
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 22.07.5-2ubuntu1.5
Depends: dbus (>= 1.9.18), libaccountsservice0 (= 22.07.5-2ubuntu1.5), libc6 (>= 2.34), libglib2.0-0 (>= 2.63.5), libpolkit-gobject-1-0 (>= 0.99)
Recommends: default-logind | logind
Suggests: gnome-control-center
Description: query and manipulate user account information
 The AccountService project provides a set of D-Bus
 interfaces for querying and manipulating user account
 information and an implementation of these interfaces,
 based on the useradd, usermod and userdel commands.
Homepage: https://www.freedesktop.org/wiki/Software/AccountsService/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>

Package: acpid
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 150
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:2.0.33-1ubuntu1
Depends: libc6 (>= 2.34), lsb-base (>= 3.2-14), kmod
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/default/acpid 5b934527919a9bba89c7978d15e918b3
 /etc/init.d/acpid 2ba41d3445b3052d9d2d170b7a9c30dc
Description: Advanced Configuration and Power Interface event daemon
 Modern computers support the Advanced Configuration and Power Interface (ACPI)
 to allow intelligent power management on your system and to query battery and
 configuration status.
 .
 ACPID is a completely flexible, totally extensible daemon for delivering
 ACPI events. It listens on netlink interface (or on the deprecated file
 /proc/acpi/event), and when an event occurs, executes programs to handle the
 event. The programs it executes are configured through a set of configuration
 files, which can be dropped into place by packages or by the admin.
Homepage: http://sourceforge.net/projects/acpid2/
Original-Maintainer: Josue Ortega <josue@debian.org>

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 608
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.118ubuntu5
Depends: passwd, debconf (>= 0.5) | debconf-2.0
Suggests: liblocale-gettext-perl, perl, ecryptfs-utils (>= 67-1)
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
Original-Maintainer: Debian Adduser Developers <adduser@packages.debian.org>

Package: adwaita-icon-theme
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 5234
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 41.0-1ubuntu1
Replaces: adwaita-icon-theme-full (<< 41.0-1ubuntu1), gnome-themes-standard-data (<< 3.18.0-2~)
Depends: hicolor-icon-theme, gtk-update-icon-cache, ubuntu-mono | adwaita-icon-theme-full
Recommends: librsvg2-common
Breaks: adwaita-icon-theme-full (<< 41.0-1ubuntu1), gnome-themes-standard-data (<< 3.18.0-2~)
Description: default icon theme of GNOME (small subset)
 This package contains the default icon theme used by the GNOME desktop.
 The icons are used in many of the official gnome applications like eog,
 evince, system monitor, and many more.
 .
 This package only contains a small subset of the original GNOME icons which
 are not provided by the Humanity icon theme, to avoid installing many
 duplicated icons. Please install adwaita-icon-theme-full if you want the full
 set.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: alsa-topology-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 420
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.2.5.1-2
Replaces: libasound2-data (<< 1.2.1)
Breaks: libasound2-data (<< 1.2.1)
Enhances: libasound2-data
Description: ALSA topology configuration files
 This package contains ALSA topology configuration files that can be used
 by libasound2 for specific audio hardware.
 .
 ALSA is the Advanced Linux Sound Architecture.
Original-Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Homepage: https://www.alsa-project.org/

Package: alsa-ucm-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 599
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.2.6.3-1ubuntu1.12
Depends: libasound2 (>= 1.2.4)
Description: ALSA Use Case Manager configuration files
 This package contains ALSA Use Case Manager configuration of audio
 input/output names and routing for specific audio hardware. They can be
 used with the alsaucm tool.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/
Original-Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>

Package: amd64-microcode
Status: install ok installed
Priority: standard
Section: non-free/admin
Installed-Size: 122
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.20191218.1ubuntu2.3
Recommends: initramfs-tools (>= 0.113~) | dracut (>= 044) | tiny-initramfs
Breaks: intel-microcode (<< 2)
Conffiles:
 /etc/default/amd64-microcode eaa8a5fa3fb59af4f0f55e851a6e9b20
 /etc/modprobe.d/amd64-microcode-blacklist.conf 71327241f6583b34944e638a955aba91
Description: Processor microcode firmware for AMD CPUs
 This package contains microcode patches for all AMD AMD64
 processors.  AMD releases microcode patches to correct
 processor behavior as documented in the respective processor
 revision guides.
 .
 For Intel processors, please refer to the intel-microcode package.
Original-Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>

Package: apache2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 536
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.4.52-1ubuntu4.19
Replaces: apache2.2-bin, apache2.2-common
Provides: httpd, httpd-cgi
Depends: apache2-bin (= 2.4.52-1ubuntu4.19), apache2-data (= 2.4.52-1ubuntu4.19), apache2-utils (= 2.4.52-1ubuntu4.19), lsb-base, mime-support, perl:any, procps
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: ssl-cert
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, www-browser, ufw
Conflicts: apache2.2-bin, apache2.2-common
Conffiles:
 /etc/apache2/apache2.conf 20589b50379161ebc8cb35f761af2646
 /etc/apache2/conf-available/charset.conf 46ea15bcd82c11ea0973aa8842b1dc56
 /etc/apache2/conf-available/localized-error-pages.conf cfd0ae5e448102514efe8b97181d19c9
 /etc/apache2/conf-available/other-vhosts-access-log.conf 60d5d57995317aedb02bd2a20b366717
 /etc/apache2/conf-available/security.conf f2e736bb593323988d1ebdabee67729f
 /etc/apache2/conf-available/serve-cgi-bin.conf 21abde7dadc1020140b9ab796d06fd29
 /etc/apache2/envvars e4431a53c868ae0dfcde68564f3ce6a7
 /etc/apache2/magic a6d370833a02f53db6a0a30800704994
 /etc/apache2/mods-available/access_compat.load f7f77b3eb4005749b583ff14b49f8bf1
 /etc/apache2/mods-available/actions.conf 8736884dbc596bcfdbb392409c96fde5
 /etc/apache2/mods-available/actions.load 95dcfd2efdd41666de5f31dd72e01e41
 /etc/apache2/mods-available/alias.conf c6e9f26152898c38e58211c8b362d5c3
 /etc/apache2/mods-available/alias.load 7742296502ce1d2f970cc87322d8ffba
 /etc/apache2/mods-available/allowmethods.load b377b96eb4dddd88f9428d9cc2fd87ea
 /etc/apache2/mods-available/asis.load d1003c9fa12b4d3ed35ea3827a689492
 /etc/apache2/mods-available/auth_basic.load a92c34a3ce5e67e2ecbd272155ebe072
 /etc/apache2/mods-available/auth_digest.load f29d047cd59013e2fa6724d677c7970b
 /etc/apache2/mods-available/auth_form.load 731420a769dd8ad537d68bfdbdd6a506
 /etc/apache2/mods-available/authn_anon.load 03cbe85c698911a3d3235b4855726481
 /etc/apache2/mods-available/authn_core.load c6420ed74b0095f8408aba3e11db4907
 /etc/apache2/mods-available/authn_dbd.load 86e21a672a4f245715a788f9873174ed
 /etc/apache2/mods-available/authn_dbm.load 4e37546871dbcba8550a0d781f6fbfa8
 /etc/apache2/mods-available/authn_file.load ecdeeab8cfec4a9dd0c065a4d6948c31
 /etc/apache2/mods-available/authn_socache.load 260e21e1eb5caa7bcabe8a2fae11445f
 /etc/apache2/mods-available/authnz_fcgi.load b12a39427b0b3a8d2ffb03cfc029da18
 /etc/apache2/mods-available/authnz_ldap.load d65845f053d08b82da239c73c9094c35
 /etc/apache2/mods-available/authz_core.load 90ad8f57655bcd98b7b07864736ab954
 /etc/apache2/mods-available/authz_dbd.load c746b8c3bf3fca950ca41fcd553328b4
 /etc/apache2/mods-available/authz_dbm.load 8cd42e62d8ca0701f9aad080ec968493
 /etc/apache2/mods-available/authz_groupfile.load 97a3e14926ce7bf5f2d2a7b93ece648d
 /etc/apache2/mods-available/authz_host.load f529587409471e3feb62256bccaf538a
 /etc/apache2/mods-available/authz_owner.load 9ed1ea15654bb594453438154b642539
 /etc/apache2/mods-available/authz_user.load bcf988f105564ec1e14b78df56a01cd8
 /etc/apache2/mods-available/autoindex.conf bfba7d77669e02b869b92e98215d58fc
 /etc/apache2/mods-available/autoindex.load b9f9d364f1b4c96c45b6db353180aa15
 /etc/apache2/mods-available/brotli.load da4d337dd726ab27221b06d92c998e36
 /etc/apache2/mods-available/buffer.load ae1e21b4fd2c2e8236ec641cae9814bd
 /etc/apache2/mods-available/cache.load ea99aba14e9aa25c27653b9958239a6e
 /etc/apache2/mods-available/cache_disk.conf b716cf836c9f00dae0366a39f511b76d
 /etc/apache2/mods-available/cache_disk.load 56ebd9819aa70a7ff8ac04e4922049f2
 /etc/apache2/mods-available/cache_socache.load 4b548216cee2e910e9059e426f81e60c
 /etc/apache2/mods-available/cern_meta.load 2c2d9adcb273f934304e7dfb5775f7b9
 /etc/apache2/mods-available/cgi.load 32a1c48f0e29feb415c9460378728d82
 /etc/apache2/mods-available/cgid.conf e8a2836392051bde889cf9c137058273
 /etc/apache2/mods-available/cgid.load c3ee2eac02c248b5a39fb1a7afee4cb9
 /etc/apache2/mods-available/charset_lite.load 1585fcd1b631c2e9b166e170cb162c54
 /etc/apache2/mods-available/data.load b6cc5b9e815f551335596cd1e25ffc34
 /etc/apache2/mods-available/dav.load 2ee48948add72e6b8682d041acbcab7f
 /etc/apache2/mods-available/dav_fs.conf 162db96239f13b5416f369b6306d9db6
 /etc/apache2/mods-available/dav_fs.load 17f662fd023dbaaab9d89f9a11ae58c1
 /etc/apache2/mods-available/dav_lock.load faad09687e64ebb9670aa0b8095d6642
 /etc/apache2/mods-available/dbd.load f03fe275174a5ed97b0f5f5726ccea60
 /etc/apache2/mods-available/deflate.conf 3715759ec5f39673a60c56c4fcd14419
 /etc/apache2/mods-available/deflate.load 6a7a23153796456ee919abdf728fd972
 /etc/apache2/mods-available/dialup.load dbc3535a9e5dfd799cf16b5c0d58f137
 /etc/apache2/mods-available/dir.conf fe4bc5fa3b3cc7a241fe57f8fabc55a1
 /etc/apache2/mods-available/dir.load 397aadae1b8b18e3a7a233cf7c297f99
 /etc/apache2/mods-available/dump_io.load 8231c51ef692e0766625ece087484fe4
 /etc/apache2/mods-available/echo.load 226a145f19c43d9f921c35eacfd61cb2
 /etc/apache2/mods-available/env.load 3e8963a7df7c047be50a552d80a4f853
 /etc/apache2/mods-available/expires.load dac64edc06fe538c2edd7b3f1f3b03f1
 /etc/apache2/mods-available/ext_filter.load d3c4acfca1322274a9a8504e8cef27e9
 /etc/apache2/mods-available/file_cache.load f097659127628ec6f9c6a558d0baf566
 /etc/apache2/mods-available/filter.load 8df0170e37a8925238860657d6c60fe5
 /etc/apache2/mods-available/headers.load ba7d09162b65d09397bd58be33138e4d
 /etc/apache2/mods-available/heartbeat.load b78970d35346bfe5eb5817d228cb209c
 /etc/apache2/mods-available/heartmonitor.load b4da13d1c05a7dd1bdeb272300c1fc83
 /etc/apache2/mods-available/http2.conf 1d8bfa43825ea9c16b6180452336ba11
 /etc/apache2/mods-available/http2.load e18e0c7e38196e7d7580ecedaaa72e3b
 /etc/apache2/mods-available/ident.load 51ba623a8a2bd71c512f847d02e0934f
 /etc/apache2/mods-available/imagemap.load 51d5109d8bc2bafc17af03beace4d8a4
 /etc/apache2/mods-available/include.load 9cf2fa9ceb6571b5fab4603daad44c83
 /etc/apache2/mods-available/info.conf 4a4aa21e0bb474d420c9a3e1c3320677
 /etc/apache2/mods-available/info.load c1faffe40b8bed9f2b817b9dc0503bb6
 /etc/apache2/mods-available/lbmethod_bybusyness.load 094b7c1d424cc4a1dee6f77d301e1888
 /etc/apache2/mods-available/lbmethod_byrequests.load f33d55ab5bbf907340426e31f99f6701
 /etc/apache2/mods-available/lbmethod_bytraffic.load e656d80b48c020b7d77ece23368e04f1
 /etc/apache2/mods-available/lbmethod_heartbeat.load 944703ff299a25cf068de7f6a2374465
 /etc/apache2/mods-available/ldap.conf 344968a263507c1991a160427e51ed9c
 /etc/apache2/mods-available/ldap.load 735ac5f246738e11a53f6c515b8dfc48
 /etc/apache2/mods-available/log_debug.load d062328e5987fa686615394768339abe
 /etc/apache2/mods-available/log_forensic.load 7177e2427eb7c78f1ab10c034a809793
 /etc/apache2/mods-available/lua.load 5e445ce688a49e0a1fcfcaa414fe21f9
 /etc/apache2/mods-available/macro.load 40e0509b4b2d307cdfe4de75fa89dc91
 /etc/apache2/mods-available/md.load 4fa08b541b4bac4a4849e6fd6d69c973
 /etc/apache2/mods-available/mime.conf f6be43a514cb9ddb44044d57849f876f
 /etc/apache2/mods-available/mime.load 9c858dc2ad2825dc3f862ecba90cf6ec
 /etc/apache2/mods-available/mime_magic.conf ebeaf79afde03c805e795bb51eec155f
 /etc/apache2/mods-available/mime_magic.load ab5c69aa0c91f11157e9bfc4972f8cce
 /etc/apache2/mods-available/mpm_event.conf d868a76835101a66be2863362ef9f81a
 /etc/apache2/mods-available/mpm_event.load 08816d280ebbd94b8c5961fc6f7168b5
 /etc/apache2/mods-available/mpm_prefork.conf 26e539a16e51c4feddd2eedc568692e6
 /etc/apache2/mods-available/mpm_prefork.load 9bcdffe5055526e0929ecd49ee311c9e
 /etc/apache2/mods-available/mpm_worker.conf 2673a5a3f030bfb704bee034ce3a183c
 /etc/apache2/mods-available/mpm_worker.load 0c6640977f0f046a55fdaf76eb54adef
 /etc/apache2/mods-available/negotiation.conf 443398efdd41085bc1a70047f6e61c95
 /etc/apache2/mods-available/negotiation.load fd7bf44d833446a35f0199d7cbcc9793
 /etc/apache2/mods-available/proxy.conf b516d96935974214588d525edd7aed6d
 /etc/apache2/mods-available/proxy.load 3d3719c88d01152e817f74fc2fd6ce9e
 /etc/apache2/mods-available/proxy_ajp.load e058e03c1d4f9e4d8e2c439ed75cc501
 /etc/apache2/mods-available/proxy_balancer.conf 5e9113f9556e17c0fec6c81232651791
 /etc/apache2/mods-available/proxy_balancer.load 9c6e6ff2195159c8af97f7673e8d2ada
 /etc/apache2/mods-available/proxy_connect.load 6bc4b5de977f70a0b6ae98ab04383c0c
 /etc/apache2/mods-available/proxy_express.load f2ad6e7e80d2750cdca5986657e7835e
 /etc/apache2/mods-available/proxy_fcgi.load 09cbda44eecbf1cbab48b30045217e3c
 /etc/apache2/mods-available/proxy_fdpass.load 9e5584db5f748a2fb71b582a255a976e
 /etc/apache2/mods-available/proxy_ftp.conf dd9beba82c2838bcfd51a05dfb540929
 /etc/apache2/mods-available/proxy_ftp.load c05db1b229a7957f0032c0d79ed7e3c9
 /etc/apache2/mods-available/proxy_hcheck.load 92898c1ef9124193fa5d9e13408e0372
 /etc/apache2/mods-available/proxy_html.conf 5b60af3b1796f2db4b5f7a8a7941f1bc
 /etc/apache2/mods-available/proxy_html.load dac7646a0a7242de76f788b4da14390b
 /etc/apache2/mods-available/proxy_http.load 161b514c355c6daa95f11371fb9c184c
 /etc/apache2/mods-available/proxy_http2.load 8a2cdbe25537eb8cb9007e351274f852
 /etc/apache2/mods-available/proxy_scgi.load cb11d685e60db26bbdad456263bf63b7
 /etc/apache2/mods-available/proxy_uwsgi.load 37493bab0af283fd186d2797a9f5f95b
 /etc/apache2/mods-available/proxy_wstunnel.load d2e5c21b886333f1662fe74591260d5d
 /etc/apache2/mods-available/ratelimit.load fb40aa030d5458dd99a0c9d1141bcde4
 /etc/apache2/mods-available/reflector.load 306c71fae73733506db9099d106ba642
 /etc/apache2/mods-available/remoteip.load 81a6511c79ab338aef51a6c185152231
 /etc/apache2/mods-available/reqtimeout.conf 40b45155afb3d14263d12e6fc4a98513
 /etc/apache2/mods-available/reqtimeout.load 7fd814775dc3f3c9e6753ef874978f96
 /etc/apache2/mods-available/request.load 36c1b324cd545e3e29b50b5e2a8357e8
 /etc/apache2/mods-available/rewrite.load 55e18fb7df64c8f390904b972637c17d
 /etc/apache2/mods-available/sed.load 8ba3c7ff4243e6a45b6e3c372fc0de1b
 /etc/apache2/mods-available/session.load b552f1e184865c597ae397876fb3a0a6
 /etc/apache2/mods-available/session_cookie.load 89aff7a7f8b4347965d4cf6ea3c5beb9
 /etc/apache2/mods-available/session_crypto.load 066002be7d8c6c381553dbded41db1b6
 /etc/apache2/mods-available/session_dbd.load cf86e56f8ee26f5dccc39c2f690d7f79
 /etc/apache2/mods-available/setenvif.conf d647c93db60a72410c1b39be1b37b7d6
 /etc/apache2/mods-available/setenvif.load 6f670fad5b6f6b14fa72c9cd3058469b
 /etc/apache2/mods-available/slotmem_plain.load fd33fcd86c77d4d5044ad904e7f38360
 /etc/apache2/mods-available/slotmem_shm.load 127df94eaf6987ad67b964f01eec3251
 /etc/apache2/mods-available/socache_dbm.load 9f11810517a6bf2eba31b336ebbfad70
 /etc/apache2/mods-available/socache_memcache.load c0101bc50501b12e7c8c74014560404b
 /etc/apache2/mods-available/socache_redis.load 5c6ee35e3b89ea7ffdb19a2b344ada94
 /etc/apache2/mods-available/socache_shmcb.load 9efb84889b8e1683ce104033bf30973d
 /etc/apache2/mods-available/speling.load 095570b0cb18ebdfc357a2241c6932ea
 /etc/apache2/mods-available/ssl.conf 6c30f44f4e2ad6bc51c917294aa8e34b
 /etc/apache2/mods-available/ssl.load 838b292226d2da6ceb3f1c793696ca12
 /etc/apache2/mods-available/status.conf 5d3689f109baf304af4f145249ca6326
 /etc/apache2/mods-available/status.load 00976ea5115f286bbc21357581d0b65e
 /etc/apache2/mods-available/substitute.load 50e63dc17612e22484a88f537e8aec8e
 /etc/apache2/mods-available/suexec.load 335169c85f4afc14524846789d46af06
 /etc/apache2/mods-available/unique_id.load 6c13959015fb35276572070b44e63380
 /etc/apache2/mods-available/userdir.conf 3a3142e84136336db8b940553a076983
 /etc/apache2/mods-available/userdir.load c034025405561ea48fbcb67fd1998f4d
 /etc/apache2/mods-available/usertrack.load 8400042dd4374fad5eedf33ffb3c68f0
 /etc/apache2/mods-available/vhost_alias.load fdd42d34966c329cdee2435dfe72ee24
 /etc/apache2/mods-available/xml2enc.load 1f7ab653ed3601bd265871cdf252a224
 /etc/apache2/ports.conf a961f23471d985c2b819b652b7f64321
 /etc/apache2/sites-available/000-default.conf f3066f67070ab9b1ad9bab81ca05330a
 /etc/apache2/sites-available/default-ssl.conf 801f4c746a88b4228596cb260a4220c4
 /etc/cron.daily/apache2 c788ffaa4c682c91e6a1cd7f53840d62
 /etc/default/apache-htcacheclean ae8721a0bc5b4e2ef7a5258b1e9db5c5
 /etc/init.d/apache-htcacheclean 29fe315052a1c5fbe9dc9f29485ed906
 /etc/init.d/apache2 9d22fb30358e61a6f190a0d09c5120bf
 /etc/logrotate.d/apache2 ab347819cceccf236cfe769a13b89d2a
 /etc/ufw/applications.d/apache2-utils.ufw.profile f8d4fd920e598ceb4379613c6261f6af
Description: Apache HTTP Server
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 Installing this package results in a full installation, including the
 configuration files, init scripts and support scripts.
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: apache2-bin
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: apache2
Version: 2.4.52-1ubuntu4.19
Provides: apache2-api-20120211, apache2-api-20120211-openssl1.1
Depends: perl:any, libapr1 (>= 1.7.0), libaprutil1 (>= 1.6.0), libaprutil1-dbd-sqlite3 | libaprutil1-dbd-mysql | libaprutil1-dbd-odbc | libaprutil1-dbd-pgsql | libaprutil1-dbd-freetds, libaprutil1-ldap, libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libcurl4 (>= 7.28.0), libjansson4 (>= 2.4), libldap-2.5-0 (>= 2.5.4), liblua5.3-0, libnghttp2-14 (>= 1.20.0), libpcre3, libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, www-browser
Description: Apache HTTP Server (modules and other binary files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains the binaries only and does not set up a working
 web-server instance. Install the "apache2" package to get a fully working
 instance.
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: apache2-data
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 856
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: apache2
Version: 2.4.52-1ubuntu4.19
Description: Apache HTTP Server (common files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains architecture-independent common files such as icons,
 error pages and static index files.
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: apache2-utils
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 399
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: apache2
Version: 2.4.52-1ubuntu4.19
Depends: libapr1 (>= 1.4.8-2~), libaprutil1 (>= 1.5.0), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libssl3 (>= 3.0.0~~alpha1)
Description: Apache HTTP Server (utility programs for web servers)
 Provides some add-on programs useful for any web server.  These include:
  - ab (Apache benchmark tool)
  - fcgistarter (Start a FastCGI program)
  - logresolve (Resolve IP addresses to hostnames in logfiles)
  - htpasswd (Manipulate basic authentication files)
  - htdigest (Manipulate digest authentication files)
  - htdbm (Manipulate basic authentication files in DBM format, using APR)
  - htcacheclean (Clean up the disk cache)
  - rotatelogs (Periodically stop writing to a logfile and open a new one)
  - split-logfile (Split a single log including multiple vhosts)
  - checkgid (Checks whether the caller can setgid to the specified group)
  - check_forensic (Extract mod_log_forensic output from Apache log files)
  - httxt2dbm (Generate dbm files for use with RewriteMap)
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: apachetop
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.19.7-3
Depends: gamin, libadns1 (>= 1.5.0~), libc6 (>= 2.15), libgamin0 | libfam0, libgcc-s1 (>= 3.0), libncurses6 (>= 6), libreadline8 (>= 6.0), libstdc++6 (>= 5), libtinfo6 (>= 6)
Description: Realtime Apache monitoring tool
 Apache top is a curses-based realtime utility to display information from a
 running copy of Apache.
 .
 It is modelled after the standard 'top' utility, and displays information such
 as the requests pers second, bytes per second and the most popular URLs
 displayed.
 .
 It must be run from a machine running Apache, as it works by processing the
 logfiles found in /var/log/apache.
Original-Maintainer: Mo Zhou <lumin@debian.org>
Homepage: https://github.com/tessus/apachetop

Package: apparmor
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2688
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0.4-2ubuntu2.5
Replaces: fcitx-data (<< 1:4.2.9.1-1ubuntu2)
Depends: debconf, lsb-base, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34)
Suggests: apparmor-profiles-extra, apparmor-utils
Breaks: apparmor-profiles-extra (<< 1.21), fcitx-data (<< 1:4.2.9.1-1ubuntu2), snapd (<< 2.44.3+20.04~)
Conffiles:
 /etc/apparmor.d/abi/3.0 f97e410509c5def279aa227c7de12e06
 /etc/apparmor.d/abi/kernel-5.4-outoftree-network 57b68acd4e6418fe5a06dc8c04713e3d
 /etc/apparmor.d/abi/kernel-5.4-vanilla 77047e6f0b014fa8bf27681998382044
 /etc/apparmor.d/abstractions/X e08b3a65c568c19b5922de1db3df0d92
 /etc/apparmor.d/abstractions/apache2-common 8608b847edc519a5733e97ba1f6311cb
 /etc/apparmor.d/abstractions/apparmor_api/change_profile 4e10aac635b960dd6a2a94330d9dc4ce
 /etc/apparmor.d/abstractions/apparmor_api/examine db7f9bf417820acdfc4c6386c749582d
 /etc/apparmor.d/abstractions/apparmor_api/find_mountpoint 0380ddf9878be96962df2e81dc74f867
 /etc/apparmor.d/abstractions/apparmor_api/introspect ca4db5b278f4c08892c2ef7027495051
 /etc/apparmor.d/abstractions/apparmor_api/is_enabled ca0172ca6c89703ff9d8f4bc50998ddc
 /etc/apparmor.d/abstractions/aspell f8676bccab5b82b0b6d723549b3a1a83
 /etc/apparmor.d/abstractions/audio ee487ce12dc8194a58ca0aad23452923
 /etc/apparmor.d/abstractions/authentication b3238cd14352633630d980a6e3b43613
 /etc/apparmor.d/abstractions/base 9ac9a0b72f34936db683f2b4fa94c891
 /etc/apparmor.d/abstractions/bash bc217483455477e1431f9e0b14fe2caf
 /etc/apparmor.d/abstractions/consoles bea9fc84b0a5d025b0baa2012fb5f187
 /etc/apparmor.d/abstractions/crypto 35881757d4885bde7e6d8b3c4285e9a4
 /etc/apparmor.d/abstractions/cups-client b34dde998ba9e2008a449b7e806b4e8a
 /etc/apparmor.d/abstractions/dbus a940df2475b2aadae7f0f352426ac0eb
 /etc/apparmor.d/abstractions/dbus-accessibility 26e593998ef58a443df94b30c462969c
 /etc/apparmor.d/abstractions/dbus-accessibility-strict 373b1eb5eab3ed798b87b63f395e59ec
 /etc/apparmor.d/abstractions/dbus-network-manager-strict 2faa81c15df866984bbefe675dd7c535
 /etc/apparmor.d/abstractions/dbus-session aae714455fab265eeaf1b6a8e347895a
 /etc/apparmor.d/abstractions/dbus-session-strict 92b0802aa074d2fa736e6a34fb21dae6
 /etc/apparmor.d/abstractions/dbus-strict 40f5d3c55ee978c6741d4d489357661c
 /etc/apparmor.d/abstractions/dconf 7c1eb2f1eb19d459e86f262c0e682107
 /etc/apparmor.d/abstractions/dovecot-common dc5a9e349cdac4d77aa883777c523c5a
 /etc/apparmor.d/abstractions/dri-common 82e78cab7a0b877758d8d6a3dce1f50d
 /etc/apparmor.d/abstractions/dri-enumerate b1c33499906ff7589e874669f13c2d4c
 /etc/apparmor.d/abstractions/enchant 4b0d599339d403df6444e116f3b49095
 /etc/apparmor.d/abstractions/exo-open c02b86d89bdf4954faecdc39bbe8da40
 /etc/apparmor.d/abstractions/fcitx a272b0bc5d085b59eafdb3e91662ce1a
 /etc/apparmor.d/abstractions/fcitx-strict ae494d8b71f3074ce9ae46d08c895113
 /etc/apparmor.d/abstractions/fonts 8594bed8b12b8b8d531c9614a2e03b75
 /etc/apparmor.d/abstractions/freedesktop.org 32548dac6ed1ea81e602e2890fbad4b1
 /etc/apparmor.d/abstractions/gio-open e1170caef97ca7544f73394db5f29fd6
 /etc/apparmor.d/abstractions/gnome 2693f4227aa0b4d6ee4ee33e29f541a4
 /etc/apparmor.d/abstractions/gnupg 28bb447b06d329b9a0307fa3957738a9
 /etc/apparmor.d/abstractions/gtk 73b9515d686c1763983d749b74930d90
 /etc/apparmor.d/abstractions/gvfs-open 75e1db87e189996c93b7f6a54898027d
 /etc/apparmor.d/abstractions/hosts_access 77d68b32a830118794977e7d9685e41e
 /etc/apparmor.d/abstractions/ibus 3ccdcd8334042d7abc1691235d14a0e8
 /etc/apparmor.d/abstractions/kde 1d25d6b22172fcd8f3707856d33a2bd0
 /etc/apparmor.d/abstractions/kde-globals-write aa5efc180fc7f48e257e3a745525bb10
 /etc/apparmor.d/abstractions/kde-icon-cache-write 0fe4c3bfdccd6098242ac94efb132a13
 /etc/apparmor.d/abstractions/kde-language-write f6419d3ec59c4f72af6ff62c85e6b50f
 /etc/apparmor.d/abstractions/kde-open5 719648196aaa5921cbbee56884ed0a0a
 /etc/apparmor.d/abstractions/kerberosclient 9eec8b4b7751bfc24c7527366652332b
 /etc/apparmor.d/abstractions/ldapclient 2d5fbb27b438f3a723af1bd0ec6589cc
 /etc/apparmor.d/abstractions/libpam-systemd 54f5c7966013802550bcd298093356a8
 /etc/apparmor.d/abstractions/likewise 5b5adaa576726b606437def545b213d9
 /etc/apparmor.d/abstractions/mdns 97550547e53831aed4566fe0412f7fae
 /etc/apparmor.d/abstractions/mesa ef72c67323d760811583c38d0aaaaa71
 /etc/apparmor.d/abstractions/mir c04cae04705882b43888b8bdad39ab7c
 /etc/apparmor.d/abstractions/mozc 51778ed730a4ad9d06ad39a848f98ae3
 /etc/apparmor.d/abstractions/mysql d0220787933388d0a1ee1e641ecdeb8d
 /etc/apparmor.d/abstractions/nameservice a04a23c6142943ef595564b806c4d2d0
 /etc/apparmor.d/abstractions/nis 42d818438562ff0a7d21566c52bdf373
 /etc/apparmor.d/abstractions/nss-systemd e51b32af03e4b39ad223a921fc08daf2
 /etc/apparmor.d/abstractions/nvidia 536d7728a8b0b3d3e63c2135c2f5307f
 /etc/apparmor.d/abstractions/opencl 390dd92d75c06bf01a0b380fa279816f
 /etc/apparmor.d/abstractions/opencl-common eddad0564696b2ecab52f34c4cb0bf44
 /etc/apparmor.d/abstractions/opencl-intel 37c17acd41c81b4427c55b15906f0fa5
 /etc/apparmor.d/abstractions/opencl-mesa d847b3acc2ba5df53309564428b32c5e
 /etc/apparmor.d/abstractions/opencl-nvidia acaa73fbb47c318ed86ec3590fa38f25
 /etc/apparmor.d/abstractions/opencl-pocl c16fccc45ac2cc77c81e5410520e8966
 /etc/apparmor.d/abstractions/openssl eebb603cd3a947c952ae9e7b2a21176a
 /etc/apparmor.d/abstractions/orbit2 3243686cfb77b2eb8ddf4dd9b1dacf51
 /etc/apparmor.d/abstractions/p11-kit 66b3abf2da8bd45e868a97a8b5c1c2de
 /etc/apparmor.d/abstractions/perl 831a9730e6f5901c26e7370e72d6e4ca
 /etc/apparmor.d/abstractions/php c906277ad06598dfea024d4e879e6b61
 /etc/apparmor.d/abstractions/php-worker d63894f8faa7f2f4fe6616f9aa6c66fa
 /etc/apparmor.d/abstractions/php5 349438200b0b1be7b44f44d2a8edb2d8
 /etc/apparmor.d/abstractions/postfix-common 43269973845c1185a9a49dc989e46885
 /etc/apparmor.d/abstractions/private-files ed54f0bf093512ab1278415225bd7c76
 /etc/apparmor.d/abstractions/private-files-strict 863e1204a719f9d3ef434c51d10c9aae
 /etc/apparmor.d/abstractions/python 085157c119b1c08179d0df54243879a8
 /etc/apparmor.d/abstractions/qt5 82345ad67eb8610fd5416145758802b5
 /etc/apparmor.d/abstractions/qt5-compose-cache-write d9590e9a862c5475024675006bf2b0ad
 /etc/apparmor.d/abstractions/qt5-settings-write 08e907106f6afdd628ce7953d6804264
 /etc/apparmor.d/abstractions/recent-documents-write 8e878574cc41a1db88eadc9c2386a323
 /etc/apparmor.d/abstractions/ruby a376a4d9edd9b6e95196f04316846410
 /etc/apparmor.d/abstractions/samba a93d8363540e7bca0fbf28873757fbfa
 /etc/apparmor.d/abstractions/smbpass 22d2a76d6718f69140430f2e4160a17c
 /etc/apparmor.d/abstractions/snap_browsers 1eee4cc3ce6156be1ce8a6a51713ce76
 /etc/apparmor.d/abstractions/ssl_certs 613bf1b6aa1abb7e3c964725f0fb8050
 /etc/apparmor.d/abstractions/ssl_keys 8610f0658edabc1b88a71676f0f5831b
 /etc/apparmor.d/abstractions/svn-repositories ff8e52c4e1962b96d234dd7a67f1d8f8
 /etc/apparmor.d/abstractions/ubuntu-bittorrent-clients d7c1be4622fa1a1a95cc710157495a8b
 /etc/apparmor.d/abstractions/ubuntu-browsers 4637c1d896dc3f2348636d216f57b12d
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/chromium-browser 153113ed58cd2b82ae59e3cf99e3df49
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/java 6e3557f9b8d6d7bfa53e5773a1d1701c
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/kde 079bbcda041f2ab3b28a0aa73e808779
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/mailto 2d485cfd81cbaa43ea61d754f937f722
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/multimedia 975af60c3988f0f29bc7650281add89d
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/plugins-common 109801b1eeb3215b1940302855106050
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/productivity f7141d1791df3cd70f1f1ffc598357de
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/text-editors 530a78215e8a637dee7df2dc06bef104
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration c36564692bd37edd33abe677b820aa0a
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration-xul 24a74fcfac9a35ff3213b5cf861f894b
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/user-files 6a97ede75f91e3ffadd94c192b47d203
 /etc/apparmor.d/abstractions/ubuntu-console-browsers 449cc0ce0d1645dfe750bc59286f3ac4
 /etc/apparmor.d/abstractions/ubuntu-console-email 5df8527a131f6073c0105e55855921c2
 /etc/apparmor.d/abstractions/ubuntu-email 4ed454816879d62df7390b625196eef8
 /etc/apparmor.d/abstractions/ubuntu-feed-readers 652ddbb016d2970643ac0854be6afb7b
 /etc/apparmor.d/abstractions/ubuntu-gnome-terminal 4a73e5a52f0aa3155b3ce5ce3f0b88a1
 /etc/apparmor.d/abstractions/ubuntu-helpers 7a0554ba395711b18681b1b1615e15a0
 /etc/apparmor.d/abstractions/ubuntu-konsole 49c45901c2aa6522869f6ecd11fc4885
 /etc/apparmor.d/abstractions/ubuntu-media-players 1cc28886d11782d036f5ad31c1fe6c0e
 /etc/apparmor.d/abstractions/ubuntu-unity7-base 76a91b15a0ac3045947dfb417f4be4e9
 /etc/apparmor.d/abstractions/ubuntu-unity7-launcher 71beb26198b3834a8cf87cb3958ce49e
 /etc/apparmor.d/abstractions/ubuntu-unity7-messaging d9524c849811152e7aaabfcac5bcd1ad
 /etc/apparmor.d/abstractions/ubuntu-xterm bed284d239d3fad55ec4138c1db49b1d
 /etc/apparmor.d/abstractions/user-download b0084d0cf20ab46c99a443d0bf4293e8
 /etc/apparmor.d/abstractions/user-mail 93afccf07c25a810459abb567bdf0ccd
 /etc/apparmor.d/abstractions/user-manpages 9f157582739dc69c3f2c092aa4cb76a2
 /etc/apparmor.d/abstractions/user-tmp 7adbf0673a8185216a529092e1bafe25
 /etc/apparmor.d/abstractions/user-write a35ac2aa74b253ad4d48c52d3e58e86c
 /etc/apparmor.d/abstractions/video cc02171362a3819ae3ec5e041afe46ef
 /etc/apparmor.d/abstractions/vulkan d3297f5e7bde98b1711d12a0b5978faa
 /etc/apparmor.d/abstractions/wayland 0dc88e01e40a1f7710cde25cf2d3e665
 /etc/apparmor.d/abstractions/web-data cb78fbb2953fa52805f371c166fd4fbd
 /etc/apparmor.d/abstractions/winbind 456c2a26ca32421ac44bd8924fbf55a8
 /etc/apparmor.d/abstractions/wutmp 5c2b39fe9978bb8b5e9637519c522c7f
 /etc/apparmor.d/abstractions/xad 4716a62377ebebbe55f0246c35591485
 /etc/apparmor.d/abstractions/xdg-desktop d0833b7462602d6008ad86a9ba724a1e
 /etc/apparmor.d/abstractions/xdg-open 79c6f5afd2a89b7fbc53d23cbba367ea
 /etc/apparmor.d/local/README e3739c14b4f8bb9b1934d7a4cdbf72c5
 /etc/apparmor.d/lsb_release 4161e668a50a4548271937b6b41d3f0d
 /etc/apparmor.d/nvidia_modprobe 7935f71d4f0ef04bacc800ffe3f583ea
 /etc/apparmor.d/tunables/alias 45dca5dd72a6c862d27caa936e6c00ad
 /etc/apparmor.d/tunables/apparmorfs 99b56bc365d01a8d83cc60c359eb8184
 /etc/apparmor.d/tunables/dovecot 1b0d5ec63a9c87387142bdb2c94e7ede
 /etc/apparmor.d/tunables/etc e31a6ae15aa518bb5b826db5f6aaf9ff
 /etc/apparmor.d/tunables/global 67d60f3e0d23f4a88300564880cba584
 /etc/apparmor.d/tunables/home 7294038da607cb4310d40dc1cb89f398
 /etc/apparmor.d/tunables/home.d/site.local 3b274206fb06833ee3e151e351dad51b
 /etc/apparmor.d/tunables/kernelvars 5d30bf3c3c6e33927ba26784985ed8ab
 /etc/apparmor.d/tunables/multiarch b484327cecfb698fc83ac505699b255a
 /etc/apparmor.d/tunables/multiarch.d/site.local 3c9eef1fbfb41fc452060086262e7bcb
 /etc/apparmor.d/tunables/proc ffaa055ceb36031c973ffaece22a5fc0
 /etc/apparmor.d/tunables/run 780b70bb51fba582c115b085a962373b
 /etc/apparmor.d/tunables/securityfs 45d73edb5f03d141634ec6a5ba2b10f3
 /etc/apparmor.d/tunables/share a15f039c6615aa63acbec04b313f08f2
 /etc/apparmor.d/tunables/sys 30f2fdf4695c26642ea02b5a2063cfbc
 /etc/apparmor.d/tunables/system dd94eef017cf91d8ea1ff5891aecab24
 /etc/apparmor.d/tunables/xdg-user-dirs 6d1a4ea99a9af4cbab2255535a1c7077
 /etc/apparmor/parser.conf 692c8fdebfbe29293c4c94053bc1d013
 /etc/init.d/apparmor 42e157dc91f6554abefa2160c2bc42db
Description: user-space parser utility for AppArmor
 apparmor provides the system initialization scripts needed to use the
 AppArmor Mandatory Access Control system, including the AppArmor Parser
 which is required to convert AppArmor text profiles into machine-readable
 policies that are loaded into the kernel for use with the AppArmor Linux
 Security Module.
Homepage: https://apparmor.net/
Original-Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 4141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.4.14
Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~)
Provides: apt-transport-https (= 2.4.14)
Depends: adduser, gpgv | gpgv2 | gpgv1, libapt-pkg6.0 (>= 2.4.14), ubuntu-keyring, libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libgnutls30 (>= 3.7.0), libseccomp2 (>= 2.4.2), libstdc++6 (>= 11), libsystemd0
Recommends: ca-certificates
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base
Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10)
Conffiles:
 /etc/apt/apt.conf.d/01-vendor-ubuntu c69ce53f5f0755e5ac4441702e820505
 /etc/apt/apt.conf.d/01autoremove ab6540f7278a05a4b7f9e58afcaa5f46
 /etc/cron.daily/apt-compat 1400ab07a4a2905b04c33e3e93d42b7b
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: apt-transport-https
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 166
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: apt
Version: 2.4.14
Depends: apt (>= 1.5~alpha4)
Description: transitional package for https support
 This is a dummy transitional package - https support has been moved into
 the apt package in 1.5. It can be safely removed.
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: apt-utils
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 792
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: apt
Version: 2.4.14
Depends: apt (= 2.4.14), libapt-pkg6.0 (>= 2.4.14), libc6 (>= 2.34), libdb5.3, libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: package management related utility programs
 This package contains some less used commandline utilities related
 to package management with APT.
 .
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of Debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: aspell
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 344
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.60.8-4build1
Replaces: aspell-bin (<< 0.60.3-2)
Provides: aspell-bin
Depends: libaspell15 (= 0.60.8-4build1), libc6 (>= 2.34), libncursesw6 (>= 6), libstdc++6 (>= 5), libtinfo6 (>= 6), dictionaries-common
Recommends: aspell-en | aspell-dictionary | aspell6a-dictionary
Suggests: aspell-doc, spellutils
Breaks: aspell-bin (<< 0.60.3-2)
Description: GNU Aspell spell-checker
 GNU Aspell is a spell-checker which can be used either as a standalone
 application or embedded in other programs.  Its main feature is that it
 does a much better job of suggesting possible spellings than just about
 any other spell-checker available for the English language, including
 Ispell and Microsoft Word.  It also has many other technical
 enhancements over Ispell such as using shared memory for dictionaries
 and intelligently handling personal dictionaries when more than one
 Aspell process is open at once.
 .
 Aspell is designed to be a drop-in replacement for Ispell.
Original-Maintainer: Agustin Martin Domingo <agmartin@debian.org>
Homepage: http://aspell.net/

Package: aspell-en
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 424
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2018.04.16-0-1
Provides: aspell-dictionary
Depends: aspell (>= 0.60.3-2), dictionaries-common (>= 0.49.2)
Description: English dictionary for GNU Aspell
 This package contains all the required files to add support for English
 language to the GNU Aspell spell checker.
 .
 American, British, Canadian and Australian spellings are included.
Original-Maintainer: Brian Nelson <pyro@debian.org>
Homepage: http://aspell.net/

Package: at-spi2-core
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 276
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.44.0-3
Depends: libatspi2.0-0 (>= 2.9.90), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.67.4), libsystemd0, libx11-6, libxtst6, gsettings-desktop-schemas
Conffiles:
 /etc/X11/Xsession.d/90qt-a11y afc7b6dfce4d98efa295023045b20424
 /etc/environment.d/90qt-a11y.conf 4f76c97d1817370071bed644d921f142
 /etc/xdg/Xwayland-session.d/00-at-spi da53e8f602edbb788b3cd6dbb056e45d
 /etc/xdg/autostart/at-spi-dbus-bus.desktop b97f071f92cfc4af379984b27cbb7304
Description: Assistive Technology Service Provider Interface (dbus core)
 This package contains the core components of GNOME Accessibility.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility

Package: atop
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 488
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.7.1-1
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4), lsb-base (>= 3.2-14)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: cron | cron-daemon
Conffiles:
 /etc/cron.d/atop 96b797316b75f50ca482fe0d3e1c61a7
 /etc/default/atop 1276a3a53fdd42ea5a3037e8e82c974b
 /etc/init.d/atop 250a9814cceca6b8c5f67f1f2997823d
 /etc/init.d/atopacct dbf3e1afd3795195f16be3b790836994
Description: Monitor for system resources and process activity
 Atop is an ASCII full-screen performance monitor, similar to the top command,
 but atop only shows the active system-resources and processes, and only shows
 the deviations since the previous interval.  At regular intervals, it shows
 system-level activity related to the CPU, memory, swap, disks and network
 layers, and it shows for every active process the CPU utilization in system
 and user mode, the virtual and resident memory growth, priority, username,
 state, and exit code. The process level activity is also shown for processes
 which finished during the last interval, to get a complete overview about the
 consumers of things such as CPU time.
 .
  Author: Gerlof Langeveld <gerlof@ATComputing.nl>
Original-Maintainer: Marc Haber <atop@packages.debian.org>
Homepage: https://atoptool.nl/

Package: auditd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 690
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: audit
Version: 1:3.0.7-1build1
Depends: libaudit1 (= 1:3.0.7-1build1), libauparse0 (= 1:3.0.7-1build1), lsb-base (>= 3.0-6), mawk | gawk, libc6 (>= 2.34), libcap-ng0 (>= 0.7.9)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: audispd-plugins
Breaks: audispd-plugins (<< 1:3.0~)
Conffiles:
 /etc/audit/audit-stop.rules 45dc8b93a8b644d96197dc87b7b2b392
 /etc/audit/auditd.conf fcda3ba8ba06665ed33396551b8aa8e4
 /etc/audit/plugins.d/af_unix.conf 199eaa1e43fa9139f0910bdb64fd219e
 /etc/audit/plugins.d/syslog.conf a60758b2069528ed9b070d8c9e935414
 /etc/audit/rules.d/audit.rules def45a38095c1c16ea919317b8020a83
 /etc/default/auditd bd36117b4a80ce610d7339ba117c4be8
 /etc/init.d/auditd 03975a59225fad7d7c28e133de85d249
Description: User space tools for security auditing
 The audit package contains the user space utilities for
 storing and searching the audit records generated by
 the audit subsystem in the Linux 2.6 kernel.
 .
 Also contains the audit dispatcher "audisp".
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Homepage: https://people.redhat.com/sgrubb/audit/

Package: augeas-lenses
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 1861
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: augeas
Version: 1.13.0-1
Suggests: augeas-doc
Description: Set of lenses needed by libaugeas0 to parse config files
 Augeas parses configuration files described in lenses into a tree structure,
 which it exposes through its public API. Changes made through the API are
 written back to the initially read files.
 .
 Lenses are the building blocks of the file <-> tree transformation; they
 combine parsing a file and building the tree (the get transformation), with
 turning the tree back into an (updated) file (the put transformation).
 .
 The transformation works very hard to preserve comments and formatting
 details. It is controlled by ``lens'' definitions that describe the file
 format and the transformation into a tree. This package includes the official
 set of lenses.
Original-Maintainer: Hilko Bengen <bengen@debian.org>
Homepage: http://augeas.net/

Package: autoconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2032
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.71-2
Depends: perl (>> 5.005), m4 (>= 1.4.13), debianutils (>= 1.8)
Recommends: automake | automaken
Suggests: autoconf-archive, gnu-standards, autoconf-doc, libtool, gettext
Breaks: gettext (<< 0.10.39), pkg-config (<< 0.25-1.1)
Conffiles:
 /etc/emacs/site-start.d/50autoconf.el 297521889d690871ec9d89c5eeff745a
Description: automatic configure script builder
 The standard for FSF source packages.  This is only useful if you
 write your own programs or if you extensively modify other people's
 programs.
 .
 For an extensive library of additional Autoconf macros, install the
 `autoconf-archive' package.
 .
 This version of autoconf is not compatible with scripts meant for
 Autoconf 2.13 or earlier.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: https://www.gnu.org/software/autoconf/

Package: automake
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1581
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: automake-1.16
Version: 1:1.16.5-1.3
Provides: automake-1.16, automaken
Depends: autoconf, autotools-dev
Suggests: autoconf-doc, gnu-standards
Description: Tool for generating GNU Standards-compliant Makefiles
 Automake is a tool for automatically generating `Makefile.in's from
 files called `Makefile.am'.
 .
 The goal of Automake is to remove the burden of Makefile maintenance
 from the back of the individual GNU maintainer (and put it on the back
 of the Automake maintainer).
 .
 The `Makefile.am' is basically a series of `make' macro definitions
 (with rules being thrown in occasionally).  The generated
 `Makefile.in's are compliant with the GNU Makefile standards.
 .
 Automake 1.16 fails to work in a number of situations that Automake
 1.11, and 1.15 did, so some previous versions are available as separate
 packages.
Original-Maintainer: Eric Dorland <eric@debian.org>
Homepage: https://www.gnu.org/software/automake/

Package: autotools-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20220109.1
Replaces: autoconf (<< 2.70~)
Breaks: autoconf (<< 2.70~)
Enhances: cdbs, debhelper
Description: Update infrastructure for config.{guess,sub} files
 This package installs an up-to-date version of config.guess and
 config.sub, used by the automake and libtool packages.  It provides
 the canonical copy of those files for other packages as well.
 .
 It also documents in /usr/share/doc/autotools-dev/README.Debian.gz
 best practices and guidelines for using autoconf, automake and
 friends on Debian packages.  This is a must-read for any developers
 packaging software that uses the GNU autotools, or GNU gettext.
 .
 Additionally this package provides seamless integration into Debhelper
 or CDBS, allowing maintainers to easily update config.{guess,sub} files
 in their packages.
Original-Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>
Homepage: https://savannah.gnu.org/projects/config/

Package: awscli
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 10113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.22.34-1
Depends: groff, python3, python3-botocore (>= 1.20.0), python3-pyasn1, python3-colorama, python3-docutils, python3-rsa, python3-s3transfer, python3-yaml, python3:any
Description: Universal Command Line Environment for AWS
 This package provides a unified command line interface to many
 Amazon Web Services.
 .
 A partial listing of these services is:
 .
  * AWS CloudFormation
  * AWS Data Pipeline
  * AWS Direct Connect
  * Amazon DynamoDB
  * AWS Elastic Beanstalk
  * AWS Elemental MediaConvert
  * AWS Identity and Access Management
  * AWS Import/Export
  * AWS OpsWorks
  * AWS Security Token Service
  * AWS Storage Gateway
  * Amazon CloudFront
  * Amazon CloudWatch
  * Amazon ElastiCache
  * Amazon Elastic Compute Cloud
  * Amazon Elastic Container Registry
  * Amazon Elastic Container Service
  * Amazon Elastic Kubernetes Service
  * Amazon Elastic MapReduce
  * Amazon Redshift
  * Amazon Relational Database Service
  * Amazon Route 53
  * Amazon Simple Email Service
  * Amazon Simple Notification Service
  * Amazon Simple Queue Service
  * Amazon Simple Storage Service
  * Amazon Simple Workflow Service
  * Auto Scaling
  * Elastic Load Balancing
Original-Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Homepage: https://aws.amazon.com/cli/

Package: baobab
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 800
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 41.0-2
Depends: dconf-gsettings-backend | gsettings-backend, libc6 (>= 2.34), libcairo2 (>= 1.2.4), libglib2.0-0 (>= 2.55.1), libgtk-3-0 (>= 3.24.1), libhandy-1-0 (>= 1.5.90), libpango-1.0-0 (>= 1.14.0)
Recommends: yelp
Description: GNOME disk usage analyzer
 Disk Usage Analyzer is a graphical, menu-driven application to analyse
 disk usage in a GNOME environment. It can easily scan either the whole
 filesystem tree, or a specific user-requested directory branch (local or
 remote).
 .
 It also auto-detects in real-time any changes made to your home
 directory as far as any mounted/unmounted device. Disk Usage Analyzer
 also provides a full graphical treemap window for each selected folder.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Apps/Baobab

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 395
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 12ubuntu4.7
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.4.10-10ubuntu3)
Pre-Depends: awk
Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~), ubuntu-server (<< 1.453)
Conffiles:
 /etc/debian_version 62f807f9edf48f460110889c2ecc3db6
 /etc/dpkg/origins/debian c47b6815f67ad1aeccb0d4529bd0b990
 /etc/dpkg/origins/ubuntu ea35901c45553c3451f60476be94d2d8
 /etc/host.conf 89408008f2585c957c031716600d5a80
 /etc/issue cbca6e0c2550b4e182691e0e81220436
 /etc/issue.net a7bd0eac993997ffd1eae454efd0911e
 /etc/legal 0110925f6e068836ef2e09356e3651d9
 /etc/lsb-release 030a6c03519bd00b405e95f8759c9c8f
 /etc/profile.d/01-locale-fix.sh 870346d97b16faac4a371b04ffe4cc2f
 /etc/update-motd.d/00-header 4a1e6eed7a59f200b4267085721750a3
 /etc/update-motd.d/10-help-text 077515e01cab84009bfa20cf88cb34bc
 /etc/update-motd.d/50-motd-news 54567afa89b3a7983d05ff217fe4a9fd
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 243
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.52build1
Replaces: base
Depends: libc6 (>= 2.34), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1864
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.1-6ubuntu1.1
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 3aa8b92d1dd6ddf4daaedc019662f1dc
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc 1f98b8f3f3c8f8927eca945d59dcc1c6
 /etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 1464
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1:2.11-5ubuntu1
Provides: dh-sequence-bash-completion
Conffiles:
 /etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
 /etc/profile.d/bash_completion.sh 4257431f99f10e5fbe86b39b6b9e5002
Description: programmable completion for the bash shell
 bash completion extends bash's standard completion behavior to achieve
 complex command lines with just a few keystrokes.  This project was
 conceived to produce programmable completion routines for the most
 common Linux/UNIX commands, reducing the amount of typing sysadmins
 and programmers need to do on a daily basis.
Homepage: https://github.com/scop/bash-completion
Original-Maintainer: Gabriel F. T. Gomes <gabriel@inconstante.net.br>

Package: bind9-dnsutils
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 535
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.18.39-0ubuntu0.22.04.2
Provides: dnsutils
Depends: bind9-host | host, bind9-libs (= 1:9.18.39-0ubuntu0.22.04.2), libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libidn2-0 (>= 2.0.0), libkrb5-3 (>= 1.6.dfsg.2)
Breaks: bind-dnsutils (<< 1:9.13.6~), dnsutils (<< 1:9.13.6~)
Conflicts: bind-dnsutils (<< 1:9.13.6~), dnsutils (<< 1:9.13.6~)
Description: Clients provided with BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers various client programs related to DNS that are
 derived from the BIND 9 source tree.
 .
  - dig - query the DNS in various ways
  - nslookup - the older way to do it
  - nsupdate - perform dynamic updates (See RFC2136)
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>

Package: bind9-host
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 186
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.18.39-0ubuntu0.22.04.2
Replaces: bind-host (<< 1:9.13.6~)
Provides: host
Depends: bind9-libs (= 1:9.18.39-0ubuntu0.22.04.2), libc6 (>= 2.34), libidn2-0 (>= 2.0.0)
Breaks: bind-host (<< 1:9.13.6~)
Description: DNS Lookup Utility
 This package provides the 'host' DNS lookup utility in the form that
 is bundled with the BIND 9 sources.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>

Package: bind9-libs
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 3492
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.18.39-0ubuntu0.22.04.2
Replaces: bind-libs (<< 1:9.13.6~)
Depends: libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libgssapi-krb5-2 (>= 1.17), libjson-c5 (>= 0.15), libkrb5-3 (>= 1.6.dfsg.2), liblmdb0 (>= 0.9.7), libmaxminddb0 (>= 1.3.0), libnghttp2-14 (>= 1.12.0), libssl3 (>= 3.0.0~~alpha1), libuv1 (>= 1.34.2), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: bind-libs (<< 1:9.13.6~)
Description: Shared Libraries used by BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package contains a bundle of shared libraries used by BIND 9.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>

Package: binutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.38-4ubuntu2.12
Provides: binutils-gold, elf-binutils
Depends: binutils-common (= 2.38-4ubuntu2.12), libbinutils (= 2.38-4ubuntu2.12), binutils-x86-64-linux-gnu (= 2.38-4ubuntu2.12)
Suggests: binutils-doc (>= 2.38-4ubuntu2.12)
Conflicts: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), binutils-multiarch (<< 2.27-8), modutils (<< 2.4.19-1)
Description: GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: binutils-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 508
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.38-4ubuntu2.12
Replaces: binutils (<< 2.29.1-3.1~)
Breaks: binutils (<< 2.29.1-3.1~)
Description: Common files for the GNU assembler, linker and binary utilities
 This package contains the localization files used by binutils packages for
 various target architectures and parts of the binutils documentation. It is
 not useful on its own.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: binutils-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 10423
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: binutils
Version: 2.38-4ubuntu2.12
Replaces: binutils (<< 2.29-6)
Depends: binutils-common (= 2.38-4ubuntu2.12), libbinutils (= 2.38-4ubuntu2.12), libc6 (>= 2.34), libctf-nobfd0 (>= 2.36), libctf0 (>= 2.36), libgcc-s1 (>= 4.2), zlib1g (>= 1:1.1.4)
Suggests: binutils-doc (= 2.38-4ubuntu2.12)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities, for x86-64-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the x86-64-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for x86-64-linux-gnu and x86-64-linux-gnu is not your native platform.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: bison
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2460
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.8.2+dfsg-1build1
Depends: m4, libc6 (>= 2.34)
Suggests: bison-doc
Description: YACC-compatible parser generator
 Bison is a general-purpose parser generator that converts a
 grammar description for an LALR(1) context-free grammar into a C
 program to parse that grammar.  Once you are proficient with Bison, you
 may use it to develop a wide range of language parsers, from those used
 in simple desk calculators to complex programming languages.
 .
 Bison is upward compatible with Yacc: all properly-written Yacc
 grammars ought to work with Bison with no change.  Anyone familiar with
 Yacc should be able to use Bison with little trouble.  Documentation of
 the program is in the bison-doc package.
Original-Maintainer: Chuan-kai Lin <cklin@debian.org>
Homepage: https://www.gnu.org/software/bison/

Package: bridge-utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.7-1ubuntu3
Depends: libc6 (>= 2.34)
Suggests: ifupdown
Conflicts: ifupdown (<< 0.8.17)
Conffiles:
 /etc/default/bridge-utils 551c1fb3cb661fc75b10e75eb284f989
Description: Utilities for configuring the Linux Ethernet bridge
 This package contains utilities for configuring the Linux Ethernet
 bridge in Linux. The Linux Ethernet bridge can be used for connecting
 multiple Ethernet devices together. The connecting is fully
 transparent: hosts connected to one Ethernet device see hosts
 connected to the other Ethernet devices directly.
Original-Maintainer: Santiago Garcia Mantinan <manty@debian.org>

Package: bsd-mailx
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 174
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 8.1.2-0.20180807cvs-2build2
Provides: mail-reader, mailx
Depends: base-files (>= 2.2.0), default-mta | mail-transport-agent, libbsd0 (>= 0.9.1), libc6 (>= 2.34), liblockfile1 (>= 1.0)
Conffiles:
 /etc/mail.rc 2bd8160a85f53c20e55ebd375fc89431
Description: simple mail user agent
 bsd-mailx is the traditional simple command-line-mode mail user agent.
 Even if you don't use it, it may be required by other programs.
 .
 The /usr/bin/mail command provided by this package is a very simple one,
 and does not include many features that can be found in more advanced
 mail user agents.
 .
 For example bsd-mailx DOES NOT support:
  - MIME           (i.e. no attachments, no UTF-8 or other charsets support);
  - SMTP protocol  (/usr/sbin/sendmail interface only is used);
  - POP3/IMAP      (bsd-mailx reads local mailboxes only);
  - maildir format (traditional mbox only format is supported).
 .
 If the above features are needed, please consider installing another package
 providing similar /usr/bin/mail interface:
  - s-nail package,
  - or mailutils package.
Original-Maintainer: Robert Luberda <robert@debian.org>

Package: bsdextrautils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 341
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Replaces: bsdmainutils (<< 12.1.3)
Depends: libc6 (>= 2.34), libsmartcols1 (>= 2.31.1), libtinfo6 (>= 6)
Breaks: bsdmainutils (<< 12.1.3)
Description: extra utilities from 4.4BSD-Lite
 This package contains some extra BSD utilities: col, colcrt, colrm, column,
 hd, hexdump, look, ul and write.
 Other BSD utilities are provided by bsdutils and calendar.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: bsdmainutils
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 27
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 12.1.7+nmu3ubuntu2
Depends: bsdutils (>= 3.0-0), debianutils (>= 1.8), bsdextrautils (>= 2.35.2-7), ncal
Suggests: calendar, whois, vacation, mailutils
Conffiles:
 /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96 obsolete
Description: Transitional package for more utilities from FreeBSD
 This is a transitional package, it can be safely removed.
Original-Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 334
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.37.2-4ubuntu3.4)
Version: 1:2.37.2-4ubuntu3.4
Pre-Depends: libc6 (>= 2.34), libsystemd0
Recommends: bsdextrautils
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a Debian
 system: logger, renice, script, scriptlive, scriptreplay and wall. The
 remaining standard BSD utilities are provided by bsdextrautils.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: bubblewrap
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 129
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.6.1-1ubuntu0.1
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), libselinux1 (>= 3.1~)
Recommends: procps
Breaks: flatpak (<< 0.8.0-2~)
Description: utility for unprivileged chroot and namespace manipulation
 bubblewrap uses Linux namespaces to launch unprivileged containers.
 These containers can be used to sandbox semi-trusted applications such
 as Flatpak apps, image/video thumbnailers and web browser components,
 or to run programs in a different library stack such as a Flatpak runtime
 or a different Debian release.
 .
 By default, this package relies on a kernel with user namespaces enabled.
 Official Debian and Ubuntu kernels are suitable.
 .
 On kernels without user namespaces, system administrators can make the
 bwrap executable setuid root, allowing it to create unprivileged
 containers even though ordinary user processes cannot.
Homepage: https://github.com/containers/bubblewrap
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: build-essential
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 12.9ubuntu3
Depends: libc6-dev | libc-dev, gcc (>= 4:10.2), g++ (>= 4:10.2), make, dpkg-dev (>= 1.17.11)
Description: Informational list of build-essential packages
 If you do not plan to build Debian packages, you don't need this
 package.  Starting with dpkg (>= 1.14.18) this package is required
 for building Debian packages.
 .
 This package contains an informational list of packages which are
 considered essential for building Debian packages.  This package also
 depends on the packages on that list, to make it easy to have the
 build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.
 .
 This package is NOT the definition of what packages are
 build-essential; the real definition is in the Debian Policy Manual.
 This package contains merely an informational list, which is all
 most people need.   However, if this package and the manual disagree,
 the manual is correct.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: busybox-initramfs
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 361
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: busybox
Version: 1:1.30.1-7ubuntu3.1
Depends: libc6 (>= 2.34)
Description: Standalone shell setup for initramfs
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for the most common
 utilities you would usually find on your desktop system (i.e., ls, cp, mv,
 mount, tar, etc.). The utilities in BusyBox generally have fewer options than
 their full-featured GNU cousins; however, the options that are included
 provide the expected functionality and behave very much like their GNU
 counterparts.
 .
 busybox-initramfs provides a simple stand alone shell that provides
 only the basic utilities needed for the initramfs.
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: busybox-static
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 2245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: busybox
Version: 1:1.30.1-7ubuntu3.1
Replaces: busybox
Provides: busybox
Conflicts: busybox
Description: Standalone rescue shell with tons of builtin utilities
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for the most common
 utilities you would usually find on your desktop system (i.e., ls, cp, mv,
 mount, tar, etc.).  The utilities in BusyBox generally have fewer options than
 their full-featured GNU cousins; however, the options that are included
 provide the expected functionality and behave very much like their GNU
 counterparts.
 .
 busybox-static provides you with a statically linked simple stand alone shell
 that provides all the utilities available in BusyBox. This package is
 intended to be used as a rescue shell, in the event that you screw up your
 system. Invoke "busybox sh" and you have a standalone shell ready to save
 your system from certain destruction. Invoke "busybox", and it will list the
 available builtin commands.
Built-Using: glibc (= 2.35-0ubuntu3.8)
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: bzip2
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.0.8-5build1
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.8-5build1), libc6 (>= 2.34)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://sourceware.org/bzip2/

Package: ca-certificates
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 399
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20240203~22.04.1
Depends: openssl (>= 1.1.1), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 Contains the certificate authorities shipped with Mozilla's browser to allow
 SSL-based applications to check for the authenticity of SSL connections.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.
Original-Maintainer: Julien Cristau <jcristau@debian.org>

Package: ca-certificates-java
Status: install ok installed
Priority: optional
Section: java
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20190909ubuntu1.2
Depends: ca-certificates (>= 20121114), default-jre-headless | java8-runtime-headless, libnss3 (>= 3.12.10-2~)
Conffiles:
 /etc/ca-certificates/update.d/jks-keystore f8d387ae89cb62078a81398ef00683a5
 /etc/default/cacerts 0ded97abeff69c2362939e2e881e214a
Description: Common CA certificates (JKS keystore)
 This package uses the hooks of the ca-certificates package to update the
 cacerts JKS keystore used for many java runtimes.
Original-Maintainer: Debian Java Maintainers <pkg-java-maintainers@lists.alioth.debian.org>

Package: certbot
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-certbot
Version: 1.21.0-1build1
Replaces: letsencrypt
Provides: letsencrypt
Depends: python3-certbot (= 1.21.0-1build1), debconf (>= 0.5) | debconf-2.0, python3:any
Suggests: python-certbot-doc, python3-certbot-apache, python3-certbot-nginx
Conffiles:
 /etc/cron.d/certbot b100f45b33319f91060b0a59721a0ede
 /etc/letsencrypt/cli.ini d409bf370c29a96fe865b5536b2135da
 /etc/logrotate.d/certbot a815a66a333f2637c00055fcd44b02d4
Description: automatically configure HTTPS using Let's Encrypt
 The objective of Certbot, Let's Encrypt, and the ACME (Automated
 Certificate Management Environment) protocol is to make it possible
 to set up an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention. This is
 accomplished by running a certificate management agent on the web
 server.
 .
 This agent is used to:
 .
   - Automatically prove to the Let's Encrypt CA that you control the website
   - Obtain a browser-trusted certificate and set it up on your web server
   - Keep track of when your certificate is going to expire, and renew it
   - Help you revoke the certificate if that ever becomes necessary.
 .
 This package contains the main application, including the standalone
 and the manual authenticators.
Original-Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Homepage: https://certbot.eff.org/

Package: chkrootkit
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 1054
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.55-4
Depends: libc6 (>= 2.34)
Recommends: binutils, procps, iproute2 | net-tools
Enhances: bcron, biff, bind9, bsdextrautils, busybox-syslogd, citadel-server, coreutils, courier-mta, cron, dma, esmtp-run, exim4-daemon-heavy, exim4-daemon-light, fetchmail, findutils, fingerd, finit-sysv, gpm, grep, hdparm, inetutils-syslogd, inetutils-telnetd, login, lsof, mailutils, masqmail, mingetty, msmtp-mta, net-tools, nullmailer, openbsd-inetd, opensmtpd, openssh-client, openssh-server, passwd, postfix, procps, psmisc, rpcbind, rsh-redone-server, runit-init, ssmtp, systemd-cron, systemd-sysv, sysvinit-core, sysvinit-utils, tar, tcm, tcpd, tcpdump, traceroute, util-linux
Conffiles:
 /etc/chkrootkit/chkrootkit.conf 8d3fe49ab3f3cd7212c1b00cfefeff10
 /etc/chkrootkit/chkrootkit.ignore d41d8cd98f00b204e9800998ecf8427e
 /etc/cron.daily/chkrootkit 9eb1c53a58b91df1d7eb67a7828c38b1
Description: rootkit detector
 The chkrootkit security scanner searches for signs that the system is
 infected with a 'rootkit'. Rootkits are a form of malware that seek
 to exploit security flaws to grant unauthorised access to a
 computer or its services, generally for malicious purposes.
 .
 chkrootkit can identify signs of over 70 different rootkits (see the
 project's website for a list).
 .
 Please note that an automated tool like chkrootkit can never
 guarantee a system is uncompromised. Nor does every report always
 signify a genuine problem: human judgement and further investigation
 will always be needed to assure the security of your system.
Original-Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Built-Using: glibc (= 2.34-0ubuntu3)
Homepage: http://www.chkrootkit.org/

Package: chrony
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 621
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.2-2ubuntu2
Replaces: time-daemon
Provides: time-daemon
Depends: adduser, iproute2, libcap2-bin (>= 1:2.32-1), tzdata, ucf, libc6 (>= 2.34), libcap2 (>= 1:2.10), libedit2 (>= 2.11-20080614-0), libgnutls30 (>= 3.7.2), libnettle8, libseccomp2 (>= 2.4.3-1~)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: dnsutils, networkd-dispatcher
Breaks: network-manager (<< 1.20.0-1~)
Conflicts: time-daemon
Conffiles:
 /etc/apparmor.d/usr.sbin.chronyd fc70b57e27fe0e05351465be6155518c
 /etc/chrony/conf.d/README 3c8199dc2b9ac86e131f83bbaebdd698
 /etc/chrony/sources.d/README 8f69d2e0dca0a28c66b2759b09b282b0
 /etc/default/chrony 523a025f432d7edfe6381e5900be8772
 /etc/dhcp/dhclient-exit-hooks.d/chrony d112a665f6d89e92a9bf7bdf1b958326
 /etc/init.d/chrony f11b9c1b677cd3243d8ff346a0bd1593
 /etc/logrotate.d/chrony 6a3178c4670de7de393d9365e2793740
 /etc/network/if-post-down.d/chrony 977c4c750450531a288711e6000afcee
 /etc/network/if-up.d/chrony 977c4c750450531a288711e6000afcee
 /etc/ppp/ip-down.d/chrony 83c004d5104eaff2300527031dbf1957
 /etc/ppp/ip-up.d/chrony c929c3d3bebc71b1e249c3d0152b6706
Description: Versatile implementation of the Network Time Protocol
 It consists of a pair of programs:
 .
 chronyd:  This is a daemon which runs in background on the system.
 It obtains measurements (e.g. via the network) of the system's offset
 relative to other systems and adjusts the system time accordingly. For
 isolated systems, the user can periodically enter the correct time by
 hand (using 'chronyc'). In either case 'chronyd' determines the rate
 at which the computer gains or loses time, and compensates for this.
 Chronyd implements the NTP protocol and can act as either a client or
 a server.
 .
 chronyc: This is a command-line driven control and monitoring program.
 An administrator can use this to fine-tune various parameters within
 the daemon, add or delete servers etc whilst the daemon is running.
Homepage: https://chrony.tuxfamily.org
Original-Maintainer: Vincent Blut <vincent.debian@free.fr>

Package: clamav
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 14135
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.3+dfsg-0ubuntu0.22.04.1
Depends: clamav-freshclam (>= 1.4.3+dfsg) | clamav-data, libc6 (>= 2.34), libclamav12 (>= 1.4.3), libcurl4 (>= 7.16.2), libgcc-s1 (>= 4.2), libjson-c5 (>= 0.15), zlib1g (>= 1:1.2.3.3)
Recommends: clamav-base
Suggests: libclamunrar, clamav-doc
Description: anti-virus utility for Unix - command-line interface
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 This package contains the command line interface. Features:
  - built-in support for various archive formats, including Zip, Tar,
    Gzip, Bzip2, OLE2, Cabinet, CHM, BinHex, SIS and others;
  - built-in support for almost all mail file formats;
  - built-in support for ELF executables and Portable Executable files
    compressed with UPX, FSG, Petite, NsPack, wwpack32, MEW, Upack and
    obfuscated with SUE, Y0da Cryptor and others;
  - built-in support for popular document formats including Microsoft
    Office and Mac Office files, HTML, RTF and PDF.
 .
 For scanning to work, a virus database is needed. There are two options
 for getting it:
  - clamav-freshclam: updates the database from Internet. This is
    recommended with Internet access.
  - clamav-data: for users without Internet access. The package is
    not updated once installed. The clamav-getfiles package allows
    creating custom packages from an Internet-connected computer.
Homepage: https://www.clamav.net/
Original-Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>

Package: clamav-base
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 202
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: clamav
Version: 1.4.3+dfsg-0ubuntu0.22.04.1
Depends: adduser, logrotate, ucf, debconf (>= 0.5) | debconf-2.0
Recommends: clamav
Description: anti-virus utility for Unix - base package
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 This package mainly manages the clamav system account. It is not really
 useful without the clamav or clamav-daemon package.
Homepage: https://www.clamav.net/
Original-Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>

Package: clamav-daemon
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1008
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: clamav
Version: 1.4.3+dfsg-0ubuntu0.22.04.1
Depends: adduser, clamav-base (= 1.4.3+dfsg-0ubuntu0.22.04.1), clamav-freshclam (>= 1.4.3+dfsg) | clamav-data, dpkg (>= 1.16.1), procps (>= 1:3.3.2), ucf, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libclamav12 (>= 1.4.3), libcurl4 (>= 7.18.2), libncurses6 (>= 6), libsystemd0, libtinfo6 (>= 6), zlib1g (>= 1:1.2.0.2)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: clamdscan
Suggests: libclamunrar, apparmor, clamav-doc, daemon
Conffiles:
 /etc/apparmor.d/usr.sbin.clamd 07045decaefc0faed26a3e2515c0ff9e
 /etc/init.d/clamav-daemon 382ae9b358076d8a3e5d5d0818796e50
 /etc/logcheck/ignore.d.paranoid/clamav-daemon a2d0bd9c56a1b58dc939b4eb84d92206
 /etc/logcheck/ignore.d.server/clamav-daemon 5124f89490b134ebe8bb898f41c25e79
Description: anti-virus utility for Unix - scanner daemon
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 This package contains the daemon featuring:
  - fast, multi-threaded daemon;
  - easy integration with MTA's;
  - support for on-access scanning;
  - remote scanning;
  - able to be run supervised by daemon.
Homepage: https://www.clamav.net/
Original-Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>

Package: clamav-freshclam
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 523
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: clamav
Version: 1.4.3+dfsg-0ubuntu0.22.04.1
Provides: clamav-data
Depends: clamav-base (>= 1.4.3+dfsg-0ubuntu0.22.04.1), dpkg (>= 1.16.1), logrotate, procps (>= 1:3.3.2), ucf, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libclamav12 (>= 1.4.3)
Recommends: ca-certificates
Suggests: apparmor, clamav-doc
Conflicts: clamav-data, libclamav2, libclamav3
Conffiles:
 /etc/apparmor.d/usr.bin.freshclam e201b670a6a1502573ed48b3c75413fe
 /etc/init.d/clamav-freshclam 78639f5006295d13a6435377b9ea94e0
 /etc/logcheck/ignore.d.server/clamav-freshclam eea142f7981a84fa4381e21165c987c3
 /etc/network/if-down.d/clamav-freshclam-ifupdown 7dc2b85312c36a6f29969e400e879b28
 /etc/network/if-up.d/clamav-freshclam-ifupdown 7dc2b85312c36a6f29969e400e879b28
 /etc/ppp/ip-down.d/clamav-freshclam-ifupdown 7dc2b85312c36a6f29969e400e879b28
 /etc/ppp/ip-up.d/clamav-freshclam-ifupdown 7dc2b85312c36a6f29969e400e879b28
Description: anti-virus utility for Unix - virus database update utility
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 This package contains the freshclam program and scripts to automate virus
 database updating. It relies on an Internet connection, but can be
 run in a variety of ways to compensate for intermittent connections.
Homepage: https://www.clamav.net/
Original-Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>

Package: clamdscan
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 254
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: clamav
Version: 1.4.3+dfsg-0ubuntu0.22.04.1
Depends: clamav-base (= 1.4.3+dfsg-0ubuntu0.22.04.1), libc6 (>= 2.34), libclamav12 (>= 1.4.3)
Suggests: clamav-daemon, clamav-doc
Description: anti-virus utility for Unix - scanner client
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 This package contains clamdscan, the command line interface of the clamav
 daemon.
Homepage: https://www.clamav.net/
Original-Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>

Package: comerr-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 191
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.46.5-2ubuntu1.2)
Version: 2.1-1.46.5-2ubuntu1.2
Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3)
Depends: libc6-dev | libc-dev, libcom-err2 (= 1.46.5-2ubuntu1.2)
Suggests: doc-base
Description: common error description library - headers and static libraries
 libcom_err is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
 .
 This package contains the development environment for the com_err library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: command-not-found
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 37
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Version: 22.04.0
Depends: python3-commandnotfound (= 22.04.0)
Suggests: snapd
Conffiles:
 /etc/apt/apt.conf.d/50command-not-found 9bf399a111915919e5c6952f64a6f5eb
 /etc/zsh_command_not_found 81c5c243d61731a56db6670038bf8509
Description: Suggest installation of packages in interactive bash sessions
 This package will install a handler for command_not_found that looks up
 programs not currently installed but available from the repositories.
Original-Maintainer: Zygmunt Krynicki <zkrynicki@gmail.com>

Package: console-setup
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 426
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.205ubuntu3
Depends: console-setup-linux | console-setup-freebsd | hurd, xkb-data (>= 0.9), keyboard-configuration (= 1.205ubuntu3)
Pre-Depends: debconf (>= 1.5.34)
Suggests: lsb-base (>= 3.0-6), locales
Breaks: lsb (<< 2.0-6), lsb-base (<< 3.0-6), lsb-core (<< 2.0-6)
Conflicts: console-setup-mini
Description: console font and keymap setup program
 This package provides the console with the same keyboard
 configuration scheme as the X Window System. As a result, there is no
 need to duplicate or change the keyboard files just to make simple
 customizations such as the use of dead keys, the key functioning as
 AltGr or Compose key, the key(s) to switch between Latin and
 non-Latin mode, etc.
 .
 The package also installs console fonts supporting many of the
 world's languages.  It provides an unified set of font faces - the
 classic VGA, the simplistic Fixed, and the cleaned Terminus,
 TerminusBold and TerminusBoldVGA.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: console-setup-linux
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 2171
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.205ubuntu3
Replaces: console-setup (<< 1.71), console-terminus
Provides: console-terminus
Depends: kbd (>= 0.99-12) | console-tools (>= 1:0.2.3-16), keyboard-configuration (= 1.205ubuntu3), init-system-helpers (>= 1.29~) | initscripts
Suggests: console-setup
Breaks: console-cyrillic (<= 0.9-11), console-setup (<< 1.71), console-terminus
Conflicts: console-setup-freebsd
Conffiles:
 /etc/console-setup/compose.ARMSCII-8.inc fef36b61fb8b1cacc151ad3db127f777
 /etc/console-setup/compose.CP1251.inc fef88d8c8dd4c726498003fd3cd84a7f
 /etc/console-setup/compose.CP1255.inc c972a2e90938657e97b643366b98b2ed
 /etc/console-setup/compose.CP1256.inc 5ea5e4d41da7a88f742863810e86144b
 /etc/console-setup/compose.GEORGIAN-ACADEMY.inc b6d80f40abff7e8af236796ebaca0247
 /etc/console-setup/compose.GEORGIAN-PS.inc cf45272b6bf35a22223b132600dc36c3
 /etc/console-setup/compose.IBM1133.inc a31102602f7e7cab9738022b6c5469ae
 /etc/console-setup/compose.ISIRI-3342.inc 5ada7fbba750192f11fa238add232ba9
 /etc/console-setup/compose.ISO-8859-1.inc 28f20a64f3f0b175cfaec4bce07465c2
 /etc/console-setup/compose.ISO-8859-10.inc e5fce59617c839b56574c9e323d34686
 /etc/console-setup/compose.ISO-8859-11.inc ad2f3cc7ee64602a790bad8a2a989243
 /etc/console-setup/compose.ISO-8859-13.inc 5e9ad266f17ff2a0281a870079bc8284
 /etc/console-setup/compose.ISO-8859-14.inc 360a44f83e8f8c9d463c9400dcc60de4
 /etc/console-setup/compose.ISO-8859-15.inc 695ec832355223fb036629e4e6a9a963
 /etc/console-setup/compose.ISO-8859-16.inc 8245c19b5262d8d23ca856587739eb20
 /etc/console-setup/compose.ISO-8859-2.inc c93ffa7f80e22c04c94e89a0cd742458
 /etc/console-setup/compose.ISO-8859-3.inc 67b8fafc842a4dc9b3bc0c06af394834
 /etc/console-setup/compose.ISO-8859-4.inc aba127ff3df5159c3070617a7efac46c
 /etc/console-setup/compose.ISO-8859-5.inc f861a4b0403490677e6d400f2d7129da
 /etc/console-setup/compose.ISO-8859-6.inc 41ea36ea1c1a1c0c9bebdf0016395e1f
 /etc/console-setup/compose.ISO-8859-7.inc 8f48a9f7c9f69ca828edbd7b276fe406
 /etc/console-setup/compose.ISO-8859-8.inc 9cceaa9f3312f89aba371d3c893f4e7b
 /etc/console-setup/compose.ISO-8859-9.inc 05aae7589b5062a53f346f721cb0f7d3
 /etc/console-setup/compose.KOI8-R.inc 8cfd7766b86e5e55d6e71d0d95519c92
 /etc/console-setup/compose.KOI8-U.inc 217ee62f6982736276f41f760f8622f8
 /etc/console-setup/compose.TIS-620.inc 31b73af83ef3993c128e2b983b9eaf89
 /etc/console-setup/compose.VISCII.inc e4ffc74868adf4cc39ba61dd99581899
 /etc/console-setup/remap.inc b72cfe32ffa93987f74c5cec9ac180fd
 /etc/console-setup/vtrgb 1fb3c13c4fcfa8cc4131aba905df559e
 /etc/console-setup/vtrgb.vga 302837772c14006c7956211e184acfbd
 /etc/init.d/console-setup.sh 510488b5120b580b673a15b75a5498b0
 /etc/init.d/keyboard-setup.sh b868200c6e36ef87e27ead9a3ddad2db
Description: Linux specific part of console-setup
 This package includes fonts in psf format and definitions of various
 8-bit charmaps.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: containerd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 139727
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: containerd-app
Version: 1.7.28-0ubuntu1~22.04.1
Depends: runc, libc6 (>= 2.34)
Breaks: docker.io (<< 19.03.13-0ubuntu4)
Description: daemon to control runC
 Containerd is a daemon to control runC, built for performance and density.
 Containerd leverages runC's advanced features such as seccomp and user
 namespace support as well as checkpoint and restore for cloning and live
 migration of containers.
 .
 This package contains the binaries.
Built-Using: golang-1.23 (= 1.23.1-1~22.04)
Homepage: https://containerd.io

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 7112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 8.32-4.1ubuntu1.2
Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libselinux1 (>= 3.1~)
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <mstone@debian.org>

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.13+dfsg-7ubuntu0.1
Replaces: cpio-mt
Depends: libc6 (>= 2.34)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: https://www.gnu.org/software/cpio/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: cpp
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: gcc-defaults (1.193ubuntu1)
Version: 4:11.2.0-1ubuntu1
Depends: cpp-11 (>= 11.2.0-1~)
Suggests: cpp-doc
Conflicts: cpp-doc (<< 1:2.95.3)
Description: GNU C preprocessor (cpp)
 The GNU C preprocessor is a macro processor that is used automatically
 by the GNU C compiler to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
 .
 This is a dependency package providing the default GNU C preprocessor.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: cpp-11
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 26288
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04.2
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04.2), libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Suggests: gcc-11-locales (>= 11)
Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: cron
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 255
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0pl1-137ubuntu3
Provides: cron-daemon
Depends: libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), debianutils (>= 1.7), sensible-utils, adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: anacron (>= 2.0-1), logrotate, checksecurity, default-mta | mail-transport-agent
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab e57fd77c50de7b8a8eec19de0ec3f4f3
 /etc/default/cron bc9ab63f9e143d7338909d50494d552f
 /etc/init.d/cron 2a663c89329b71c3659e7601fdb80c92
 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: https://ftp.isc.org/isc/cron/
Original-Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>

Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 444
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 7.81.0-1ubuntu1.21
Depends: libc6 (>= 2.34), libcurl4 (= 7.81.0-1ubuntu1.21), zlib1g (>= 1:1.1.4)
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: https://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 214
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.5.11+git20210903+057cd650a4ed-3build1
Depends: debianutils (>= 2.15), dpkg (>= 1.19.1), debconf (>= 0.5) | debconf-2.0
Pre-Depends: libc6 (>= 2.34)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Original-Maintainer: Andrej Shadura <andrewsh@debian.org>
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: dbus
Status: install ok installed
Priority: important
Section: devel
Installed-Size: 582
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.12.20-2ubuntu4.1
Provides: dbus-bin (= 1.12.20-2ubuntu4.1), dbus-daemon (= 1.12.20-2ubuntu4.1), dbus-session-bus-common (= 1.12.20-2ubuntu4.1), dbus-system-bus (= 1.12.20-2ubuntu4.1), dbus-system-bus-common (= 1.12.20-2ubuntu4.1), default-dbus-system-bus
Depends: adduser, libapparmor1 (>= 2.8.94), libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libdbus-1-3 (= 1.12.20-2ubuntu4.1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 3.1~), libsystemd0
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus d78b20b35de983cf6f1475dcf8cb21a1
Description: simple interprocess messaging system (daemon and utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: dbus-user-session
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 130
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.12.20-2ubuntu4.1
Provides: dbus-session-bus, default-dbus-session-bus
Depends: dbus (>= 1.12.20-2ubuntu4.1), libpam-systemd, systemd
Recommends: systemd-sysv
Breaks: dbus-x11 (<< 1.9.10-2~), policykit-1 (<< 0.105-12~), udisks2 (<< 2.1.5-2~)
Conffiles:
 /etc/X11/Xsession.d/20dbus_xdg-runtime a10c47d15857ae4b557dc7e062f6e6f1
Description: simple interprocess messaging system (systemd --user integration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 On systemd systems, this package opts in to the session model in which
 a user's session starts the first time they log in, and does not end
 until all their login sessions have ended. This model merges all
 parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up
 to one graphical session, into a single "user-session" or "super-session"
 within which all background D-Bus services are shared.
 .
 Multiple graphical sessions per user are not currently supported in this
 mode; as a result, it is particularly suitable for gdm, which responds to
 requests to open a parallel graphical session by switching to the existing
 graphical session and unlocking it.
 .
 To retain dbus' traditional session semantics, in which login sessions
 are artificially isolated from each other, remove this package and install
 dbus-x11 instead.
 .
 See the dbus package description for more information about D-Bus in general.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: dconf-gsettings-backend
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dconf
Version: 0.40.0-3ubuntu0.1
Provides: gsettings-backend
Depends: dconf-service (<< 0.40.0-3ubuntu0.1.1~), dconf-service (>= 0.40.0-3ubuntu0.1), libdconf1 (= 0.40.0-3ubuntu0.1), libc6 (>= 2.14), libglib2.0-0 (>= 2.55.2)
Description: simple configuration storage system - GSettings back-end
 DConf is a low-level key/value database designed for storing desktop
 environment settings.
 .
 This package contains a back-end for GSettings. It is needed by
 applications accessing settings through GSettings to set custom values
 and listen for changes.
Homepage: https://wiki.gnome.org/Projects/dconf
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: dconf-service
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 103
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: dconf
Version: 0.40.0-3ubuntu0.1
Depends: default-dbus-session-bus | dbus-session-bus, libdconf1 (= 0.40.0-3ubuntu0.1), libc6 (>= 2.34), libglib2.0-0 (>= 2.55.2)
Recommends: dconf-gsettings-backend
Description: simple configuration storage system - D-Bus service
 DConf is a low-level key/value database designed for storing desktop
 environment settings.
 .
 This package contains the DConf service, which applications talk to
 using D-Bus in order to obtain their settings. It is mostly used by the
 GSettings backend.
Homepage: https://wiki.gnome.org/Projects/dconf
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 512
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.5.79ubuntu1
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.20.1-3~)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk3-perl, libnet-ldap-perl, perl, debconf-kde-helper (>= 0.1+git20110702)
Breaks: apt-listchanges (<< 3.14), ubiquity (<< 17.10.2), update-notifier-common (<< 3.187~)
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>

Package: debconf-i18n
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 787
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: debconf
Version: 1.5.79ubuntu1
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf (= 1.5.79ubuntu1), liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 243
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.5-1ubuntu2
Pre-Depends: libc6 (>= 2.34)
Breaks: ifupdown (<< 0.8.36+nmu1), printer-driver-pnm2ppa (<< 1.13-12), x11-common (<< 1:7.7+23~)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile update-shells which
Original-Maintainer: Clint Adams <clint@debian.org>

Package: debsuryorg-archive-keyring
Status: deinstall ok config-files
Priority: optional
Section: misc
Installed-Size: 30
Maintainer: Ondřej Surý <ondrej@sury.org>
Architecture: all
Version: 2024.02.05+ubuntu22.04.1+deb.sury.org+1
Config-Version: 2024.02.05+ubuntu22.04.1+deb.sury.org+1
Conffiles:
 /etc/apt/trusted.gpg.d/debsuryorg-archive.gpg b2aae317f4fe5e70c5e7ba4da5ca2deb
Description: GnuPG archive keys of the deb.sury.org archives
 This keys digitally signs the Release files for its repositories hosted on
 deb.sury.org. This package contains the archive keys required for APT to verify
 the validity of the downloaded Release files.

Package: dictionaries-common
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 765
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.28.14
Replaces: openoffice.org-updatedicts
Provides: openoffice.org-updatedicts
Depends: debconf (>= 0.5) | debconf-2.0, libtext-iconv-perl, emacsen-common
Suggests: ispell | aspell | hunspell, wordlist
Breaks: hunspell-da (<= 1:3.1.0), hunspell-de-at (<= 20100727-1), hunspell-de-ch (<= 20100727-1), hunspell-de-de (<= 20100727-1), hunspell-eu-es (<= 0.4.20081029-4), hunspell-ko (<= 0.5.3-1), hunspell-uz (<= 0.6-3.1), hyphen-en-us (<< 2.8.3-1), myspell-bg (<= 3.0-12), myspell-ca (<= 0.6-10), myspell-cs (<= 20040229-5), myspell-cs-cz (<= 20040229-5), myspell-da (<= 1.6.25-1), myspell-de-at (<= 20100727-1), myspell-de-ch (<= 20100727-1), myspell-de-de (<= 20100727-1), myspell-de-de-oldspell (<= 1:2-27), myspell-en-au (<= 2.1-5), myspell-eo (<= 2.1.2000.02.25-42), myspell-es (<= 1.11-1), myspell-et (<= 1:20030606-12.1), myspell-eu-es (<= 0.4.20081029-4), myspell-fi (<= 0.7-17.3), myspell-fo (<= 0.2.44-2), myspell-fr (<= 1.4-25), myspell-fr-gut (<= 1:1.0-28), myspell-ga (<= 2.0-20), myspell-gd (<= 0.50-7), myspell-gl-es (<= 2.2a-8), myspell-gv (<= 0.50-9), myspell-he (<= 1.1-1), myspell-hu (<= 0.99.4-2), myspell-ku (<= 0.20.0-1.1), myspell-nb (<= 2.0.10-3.2), myspell-nl (<= 1:2.0-1), myspell-nn (<= 2.0.10-3.2), myspell-nr (<< 20070206-4ubuntu1), myspell-ns (<< 20070206-4ubuntu1), myspell-pl (<= 20100612-1), myspell-pt-pt (<= 20091013-2), myspell-ru (<= 0.99g5-8.1), myspell-sl (<< 1.0-3ubuntu1), myspell-ss (<< 20070206-4ubuntu1), myspell-sv-se (<= 1.3.8-6-2.2), myspell-tn (<< 20070206-4ubuntu1), myspell-ts (<< 20070207-4ubuntu1), myspell-uk (<= 1.6.0-1), myspell-ve (<< 20070206-3ubuntu1), myspell-xh (<< 20070206-4ubuntu1), myspell-zu (<< 20070207-5ubuntu1), mythes-it (<= 2.0.7.gh.deb1-3), openoffice.org-thesaurus-it (<< 2.0.7.gh.deb1-1.1ubuntu3)
Conffiles:
 /etc/emacs/site-start.d/50dictionaries-common.el 6e5295d702ddc90ac894acba3c2961b0
Description: spelling dictionaries - common utilities
 This package provides utilities shared between all wordlists and spelling
 dictionaries for Ispell, Aspell, or MySpell/Hunspell. It also includes
 support infrastructure for software using them (such as JED and Mutt),
 and some patched spell-checking Lisp files for better Emacs integration.
 .
 More information about the availability of these dictionaries and their
 naming conventions is available in the README.Debian file.
Original-Maintainer: Agustin Martin Domingo <agmartin@debian.org>
Homepage: https://salsa.debian.org/debian/dictionaries-common

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 424
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:3.8-0ubuntu2
Replaces: diff
Pre-Depends: libc6 (>= 2.34)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: https://www.gnu.org/software/diffutils/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: dirmngr
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 676
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Replaces: gnupg2 (<< 2.1.10-2)
Depends: adduser, gpgconf (= 2.2.27-3ubuntu2.5), lsb-base (>= 3.2-13), init-system-helpers (>= 1.52), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgnutls30 (>= 3.7.2), libgpg-error0 (>= 1.42), libksba8 (>= 1.3.5), libldap-2.5-0 (>= 2.5.4), libnpth0 (>= 0.90)
Recommends: gnupg (= 2.2.27-3ubuntu2.5)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor
Breaks: gnupg2 (<< 2.1.10-2)
Enhances: gpg, gpgsm, squid
Description: GNU privacy guard - network certificate management service
 dirmngr is a server for managing and downloading OpenPGP and X.509
 certificates, as well as updates and status signals related to those
 certificates.  For OpenPGP, this means pulling from the public
 HKP/HKPS keyservers, or from LDAP servers.  For X.509 this includes
 Certificate Revocation Lists (CRLs) and Online Certificate Status
 Protocol updates (OCSP).  It is capable of using Tor for network
 access.
 .
 dirmngr is used for network access by gpg, gpgsm, and dirmngr-client,
 among other tools.  Unless this package is installed, the parts of
 the GnuPG suite that try to interact with the network will fail.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: distro-info
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.1ubuntu0.2
Depends: distro-info-data (>= 0.46), libc6 (>= 2.34)
Suggests: shunit2 (>= 2.1.6)
Description: provides information about the distributions' releases
 Information about all releases of Debian and Ubuntu. The distro-info script
 will give you the codename for e.g. the latest stable release of your
 distribution. To get information about a specific distribution there are the
 debian-distro-info and the ubuntu-distro-info scripts.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>

Package: distro-info-data
Status: install ok installed
Priority: important
Section: devel
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.52ubuntu0.11
Breaks: distro-info (<< 1.0~)
Description: information about the distributions' releases (data files)
 Information about all releases of Debian and Ubuntu. The distro-info script
 will give you the codename for e.g. the latest stable release of your
 distribution. To get information about a specific distribution there are the
 debian-distro-info and the ubuntu-distro-info scripts.
 .
 This package contains the data files.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>

Package: dmeventd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 246
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lvm2 (2.03.11-2.1ubuntu5)
Version: 2:1.02.175-2.1ubuntu5
Depends: libc6 (>= 2.34), libdevmapper-event1.02.1 (>= 2:1.02.110), libdevmapper1.02.1 (>= 2:1.02.110), liblvm2cmd2.03 (>= 2.03.11)
Description: Linux Kernel Device Mapper event daemon
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a daemon to monitor events of devmapper devices.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>

Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.3-3ubuntu0.2
Depends: libc6 (>= 2.34)
Description: SMBIOS/DMI table decoder
 Dmidecode reports information about the system's hardware as described in the
 system BIOS according to the SMBIOS/DMI standard.
 .
 This information typically includes system manufacturer, model name, serial
 number, BIOS version, asset tag as well as a lot of other details of varying
 level of interest and reliability depending on the manufacturer. This will
 often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
 ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
 USB).
 .
 Beware that DMI data have proven to be too unreliable to be blindly trusted.
 Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: https://nongnu.org/dmidecode/
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>

Package: dmsetup
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 274
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.03.11-2.1ubuntu5)
Version: 2:1.02.175-2.1ubuntu5
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.138)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>

Package: dns-root-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2024071801~ubuntu0.22.04.1
Description: DNS root hints and DNSSEC trust anchor
 This package contains various root zone related data as published
 by IANA to be used by various DNS software as a common source
 of DNS root zone data, namely:
 .
  * Root Hints (root.hints)
  * Root Trust Anchors (root.key, root.ds)
Homepage: https://data.iana.org/root-anchors/
Original-Maintainer: dns-root-data packagers <dns-root-data@packages.debian.org>

Package: dnsmasq-base
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 888
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dnsmasq
Version: 2.90-0ubuntu0.22.04.1
Replaces: dnsmasq (<< 2.63-1~), dnsmasq-base
Provides: dnsmasq-base
Depends: adduser, libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libgmp10 (>= 2:6.2.1+dfsg), libhogweed6 (>= 2.4-3), libidn2-0 (>= 2.0.0), libnetfilter-conntrack3 (>= 1.0.1), libnettle8 (>= 2.4-3)
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Conflicts: dnsmasq-base-lua
Conffiles:
 /etc/dbus-1/system.d/dnsmasq.conf 9a18c8a761c2262dbf0c8b3345a85242
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.
Homepage: http://www.thekelleys.org.uk/dnsmasq/doc.html
Original-Maintainer: Simon Kelley <simon@thekelleys.org.uk>

Package: dnstop
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 20120611-2build3
Depends: libc6 (>= 2.15), libncurses6 (>= 6), libpcap0.8 (>= 0.9.8), libtinfo6 (>= 6)
Description: console tool to analyze DNS traffic
 dnstop is a console tool to analyze and display various tables of DNS traffic.
 Currently dnstop displays tables of (among others):
  * Source IP addresses
  * Destination IP addresses
  * Query types
  * Top level domains
  * Second level domains
Homepage: http://dns.measurement-factory.com/tools/dnstop/
Original-Maintainer: Marc Haber <mh+debian-packages@zugschlus.de>

Package: dnsutils
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: bind9
Version: 1:9.18.39-0ubuntu0.22.04.2
Depends: bind9-dnsutils
Description: Transitional package for bind9-dnsutils
 This is a transitional package. It can safely be removed.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>

Package: docbook-xml
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 2134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.5-11
Provides: docbk-xml
Depends: sgml-data (>= 2.0.2), sgml-base (>= 1.28), xml-core (>= 0.14)
Suggests: docbook, docbook-dsssl, docbook-xsl, docbook-defguide
Conffiles:
 /etc/sgml/docbook-xml.cat 09c9f5ea49819362a380990ede9d2a9c
 /etc/sgml/docbook-xml/4.0/dbgenent.ent e12c1ec4ee0669dd4fad8aa06f51d650
 /etc/sgml/docbook-xml/4.1.2/dbgenent.mod ff50724b83f8882fc9e8231523b01606
 /etc/sgml/docbook-xml/4.2/dbgenent.mod 081cd00c46a110da400770eb9baf968b
 /etc/sgml/docbook-xml/4.3/dbgenent.mod ce4a918789b89c9bd47e67ea708397e2
 /etc/sgml/docbook-xml/4.4/dbgenent.mod 6d98c5fb728d6c773bb73a2fc36bdc16
 /etc/sgml/docbook-xml/4.5/dbgenent.mod 4d0b7b6dc2397b03aef38f30878a66ee
Description: standard XML documentation system for software and systems
 DocBook is an XML document type definition (DTD).  That is, it
 contains the "DocBook" document structure.  This is used by authors
 or editors writing documents in the DocBook XML format.  DocBook was
 designed for books, articles, or reference documentation about
 technical matters or software.  It has emerged as an open, standard
 DTD in the software industry, and is the documentation system of
 choice for many free software projects.
 .
 This package contains the XML DTD for DocBook, which describes the
 formal structure for documents following this format.  If you wish to
 author DocBook documents using SGML rather than XML, use the
 'docbook' package.  You will need other packages in order to edit
 (psgml), validate (opensp, libxml2-utils) or format (docbook-xsl,
 docbook-dsssl) DocBook documents.
 .
 This package ships with the latest DocBook 4.5 XML DTD, as well as a
 selected set of legacy DTDs for use with older documents, including
 4.0, 4.1.2, 4.2, 4.3 and 4.4.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: https://docbook.org/schemas/4x.html

Package: docker-compose
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 498
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.29.2-1
Depends: python3-cached-property (>= 1.2.0) | python3 (>> 3.8), python3-distro (>= 1.5.0), python3-docker (>= 5), python3-dockerpty (>= 0.4.1), python3-docopt (>= 0.6.1), python3-dotenv (>= 0.13.0), python3-jsonschema, python3-requests (>= 2.20.0), python3-texttable (>= 0.9.0), python3-websocket (>= 0.32.0), python3-yaml (>= 3.10), python3:any, python3-distutils
Recommends: docker.io (>= 1.9.0)
Description: define and run multi-container Docker applications with YAML
 docker-compose is a service management software built on top of docker. Define
 your services and their relationships in a simple YAML file, and let compose
 handle the rest.
Original-Maintainer: Docker Compose Team <team+docker-compose@tracker.debian.org>
Homepage: https://docs.docker.com/compose/

Package: docker.io
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 106969
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: docker.io-app
Version: 28.2.2-0ubuntu1~22.04.1
Replaces: podman-docker
Provides: docker-cli (= 28.2.2-0ubuntu1~22.04.1)
Depends: adduser, containerd (>= 1.2.6-0ubuntu1~), iptables, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libsystemd0 (>= 209~)
Recommends: ca-certificates, git, pigz, ubuntu-fan, xz-utils, apparmor
Suggests: aufs-tools, btrfs-progs, cgroupfs-mount | cgroup-lite, debootstrap, docker-buildx, docker-compose-v2, docker-doc, rinse, zfs-fuse | zfsutils
Conflicts: podman-docker
Description: Linux container runtime
 Docker complements kernel namespacing with a high-level API which operates at
 the process level. It runs unix processes with strong guarantees of isolation
 and repeatability across servers.
 .
 Docker is a great building block for automating distributed systems:
 large-scale web deployments, database clusters, continuous deployment systems,
 private PaaS, service-oriented architectures, etc.
Built-Using: glibc (= 2.35-0ubuntu3.11), golang-1.23 (= 1.23.1-1~22.04)
Homepage: https://mobyproject.org/

Package: docutils-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 500
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-docutils
Version: 0.17.1+dfsg-2
Depends: sgml-base (>= 1.28), xml-core (>= 0.14)
Recommends: python3-docutils
Conffiles:
 /etc/sgml/docutils-common.cat 07d0fedda91cf07511ba147169574df9
Description: text processing system for reStructuredText - common data
 reStructuredText is an easy-to-read, what-you-see-is-what-you-get plaintext
 markup syntax and parser system. It is useful for in-line program documentation
 (such as Python docstrings), for quickly creating simple web pages, and for
 standalone documents.
 .
 The purpose of the Docutils project is to create a set of tools for
 processing reStructuredText documentation into useful formats, such as HTML,
 LaTeX, ODT or Unix manpages.
 .
 This package includes data and configuration files.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://docutils.sourceforge.io/

Package: dosfstools
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.2-1build3
Depends: libc6 (>= 2.34)
Description: utilities for making and checking MS-DOS FAT filesystems
 The dosfstools package includes the mkfs.fat and fsck.fat utilities, which
 respectively make and check MS-DOS FAT filesystems.
Original-Maintainer: Andreas Bombe <aeb@debian.org>
Homepage: https://github.com/dosfstools/dosfstools

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6733
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.21.1ubuntu2.6
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.34), liblzma5 (>= 5.2.2), libselinux1 (>= 3.1~), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: libapt-pkg5.0 (<< 1.7~b), lsb-base (<< 10.2019031300)
Conffiles:
 /etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b
 /etc/cron.daily/dpkg 94bb6c1363245e46256908a5d52ba4fb
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286
 /etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>

Package: dpkg-dev
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2488
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.21.1ubuntu2.6
Depends: perl:any, libdpkg-perl (= 1.21.1ubuntu2.6), tar (>= 1.28-1), bzip2, xz-utils, patch (>= 2.7), make, binutils, lto-disabled-list
Recommends: build-essential, gcc | c-compiler, fakeroot, gnupg, gpgv, libalgorithm-merge-perl
Suggests: debian-keyring
Breaks: debhelper (<< 10.10.1~)
Conffiles:
 /etc/dpkg/shlibs.default 1a2b9d0a869e2aa885ae3621c557fb95
 /etc/dpkg/shlibs.override 84b1e69080569cc5c613a50887af5200
Description: Debian package development tools
 This package provides the development tools (including dpkg-source)
 required to unpack, build and upload Debian source packages.
 .
 Most Debian source packages will require additional tools to build;
 for example, most packages need make and the C compiler gcc.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>

Package: e2fsprogs
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1516
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.46.5-2ubuntu1.2
Depends: logsave
Pre-Depends: libblkid1 (>= 2.36), libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libext2fs2 (= 1.46.5-2ubuntu1.2), libss2 (>= 1.38), libuuid1 (>= 2.16)
Recommends: e2fsprogs-l10n
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conffiles:
 /etc/cron.d/e2scrub_all bc533e09f3b3d96bfe1633ad57eb7026
 /etc/e2scrub.conf df38534cc670c70a91cf9b035845d244
 /etc/mke2fs.conf 6e57073b9789a67a66b4681739445a38
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Important: yes
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: ed
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 108
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.18-1
Depends: libc6 (>= 2.34)
Description: classic UNIX line editor
 ed is a line-oriented text editor.  It is used to
 create, display, modify and otherwise manipulate text
 files.
 .
 red is a restricted ed: it can only edit files in the
 current directory and cannot execute shell commands.
Original-Maintainer: Martin Zobel-Helas <zobel@debian.org>
Homepage: https://www.gnu.org/software/ed/

Package: eject
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 152
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Depends: libc6 (>= 2.34), libmount1 (>= 2.24.2)
Description: ejects CDs and operates CD-Changers under Linux
 This program will eject CD-ROMs (assuming your drive supports the CDROMEJECT
 ioctl). It also allows setting the autoeject feature.
 .
 On supported ATAPI/IDE multi-disc CD-ROM changers, it allows changing
 the active disc.
 .
 You can also use eject to properly disconnect external mass-storage
 devices like digital cameras or portable music players.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: emacsen-common
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.0.4
Conflicts: emacs19, emacs20, emacs21-common, emacs22-common, emacs23-common, emacs24-common, emacs25-common, xemacs21-support (<< 21.4.24-6~)
Description: Common facilities for all emacsen
 This package contains code that is needed by all the (x)emacs
 packages.  It will be automatically installed when needed.
Original-Maintainer: Rob Browning <rlb@defaultvalue.org>

Package: enchant-2
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 73
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.3.2-1ubuntu2
Depends: libc6 (>= 2.34), libenchant-2-2 (>= 2.2.3), libglib2.0-0 (>= 2.12.0)
Description: Wrapper for various spell checker engines (binary programs)
 Enchant is a generic spell checking library which uses existing
 spell checker engines such as ispell, aspell and myspell as its backends.
 .
 Enchant steps in to provide uniformity and conformity on top of these
 libraries, and implement certain features that may be lacking in any
 individual provider library.
 .
 This package contains standalone runtime binary programs.
Homepage: https://abiword.github.io/enchant/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: fakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 220
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.28-1ubuntu1
Depends: libfakeroot (>= 1.28-1ubuntu1), libc6 (>= 2.34)
Description: tool for simulating superuser privileges
 fakeroot provides a fake "root environment" by means of LD_PRELOAD and
 SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
 stat(), and other file-manipulation functions, so that unprivileged
 users can (for instance) populate .deb archives with root-owned files;
 various build tools use fakeroot for this by default.
 .
 This package contains fakeroot command and the daemon that remembers
 fake ownership/permissions of files manipulated by fakeroot
 processes.
Original-Maintainer: Clint Adams <clint@debian.org>

Package: fdisk
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 437
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Depends: libc6 (>= 2.34), libfdisk1 (>= 2.36), libmount1 (>= 2.24.2), libncursesw6 (>= 6), libreadline8 (>= 6.0), libsmartcols1 (>= 2.28~rc1), libtinfo6 (>= 6)
Description: collection of partitioning utilities
 This package contains the classic fdisk, sfdisk and cfdisk partitioning
 utilities from the util-linux suite.
 .
 The utilities included in this package allow you to partition
 your hard disk. The utilities supports both modern and legacy
 partition tables (eg. GPT, MBR, etc).
 .
 The fdisk utility is the classical text-mode utility.
 The cfdisk utilitity gives a more userfriendly curses based interface.
 The sfdisk utility is mostly for automation and scripting uses.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: file
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.41-3ubuntu0.1
Depends: libc6 (>= 2.34), libmagic1 (= 1:5.41-3ubuntu0.1)
Breaks: debhelper (<< 12.2~)
Description: Recognize the type of data in a file using "magic" numbers
 The file command is "a file type guesser", a command-line tool that
 tells you in words what kind of data a file contains.
 .
 This package contains the file program itself.
Homepage: https://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 620
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.8.0-1ubuntu3
Pre-Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: https://savannah.gnu.org/projects/findutils/
Original-Maintainer: Andreas Metzler <ametzler@debian.org>

Package: firmware-sof-signed
Status: install ok installed
Priority: optional
Section: non-free/kernel
Installed-Size: 18058
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: firmware-sof
Version: 2.0-1ubuntu4.7
Replaces: linux-firmware (<= 1.202)
Breaks: linux-firmware (<= 1.202)
Description: Intel SOF firmware - signed
 Provides the Intel SOF audio firmware and topology needed for audio
 functionality on some Intel system.
 .
 This package contains the pre-built and signed binaries.
Homepage: https://github.com/thesofproject/sof-bin
Original-Maintainer: Mark Pearson <markpearson@lenovo.com>

Package: fontconfig
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 375
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.13.1-4.2ubuntu5
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.8.1), fontconfig-config
Description: generic font configuration library - support binaries
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 Fontconfig is not a rasterization library, nor does it impose a
 particular rasterization library on the application. The X-specific
 library 'Xft' uses fontconfig along with freetype to specify and
 rasterize fonts.
 .
 This package contains a program to maintain the fontconfig cache
 (fc-cache), a sample program to list installed fonts (fc-list), a program
 to test the matching rules (fc-match) and a program to dump the binary
 cache files in string form (fc-cat). It no longer makes fonts managed by defoma
 available to fontconfig applications.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>

Package: fontconfig-config
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fontconfig
Version: 2.13.1-4.2ubuntu5
Depends: ucf (>= 0.29), fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-liberation2 | fonts-croscore | fonts-freefont-otf | fonts-freefont-ttf | fonts-urw-base35 | fonts-texgyre
Breaks: libfontconfig1 (<< 2.13.0)
Conffiles:
 /etc/fonts/conf.avail/10-antialias.conf 3629dcc380ac8c5b0306febc33b5667b
 /etc/fonts/conf.avail/10-autohint.conf b64114e5af24e4cdfc5bd5023f280287
 /etc/fonts/conf.avail/10-hinting-full.conf a5bec12a811215bb09bd0e0a58469918
 /etc/fonts/conf.avail/10-hinting-medium.conf 03715b87280da58cfe9d4c4f4d6d0488
 /etc/fonts/conf.avail/10-hinting-none.conf 709229aa350cfaf1eb59cbc4ab5f2377
 /etc/fonts/conf.avail/10-hinting-slight.conf 690acea9572bf68b0ef975636002e4f3
 /etc/fonts/conf.avail/10-no-sub-pixel.conf 1a29e6674047b54b5d240e30807fab0e
 /etc/fonts/conf.avail/10-scale-bitmap-fonts.conf 7bf8b372085774e6cbdae99235624440
 /etc/fonts/conf.avail/10-sub-pixel-bgr.conf c7aea7a564a5ec98b76d8ef1c6791ee3
 /etc/fonts/conf.avail/10-sub-pixel-rgb.conf 8bcf6192e90c1b3d0972eb1657b87e0c
 /etc/fonts/conf.avail/10-sub-pixel-vbgr.conf aee77dfa949e40dd1a2309bfae59f7c6
 /etc/fonts/conf.avail/10-sub-pixel-vrgb.conf c7c6b8d23a8a25d68b71a7d63c4d2d29
 /etc/fonts/conf.avail/10-unhinted.conf 9e2da80ad573a4c8cf582b3b63a54ed7
 /etc/fonts/conf.avail/11-lcdfilter-default.conf f4229be8b8d744a07bd153804cc89510
 /etc/fonts/conf.avail/11-lcdfilter-legacy.conf 74c9020e8ca6b87ee60b919219cbbb6e
 /etc/fonts/conf.avail/11-lcdfilter-light.conf ac0f49d468587a5db0a7e96700c9a159
 /etc/fonts/conf.avail/20-unhint-small-vera.conf 8b4b489882181273bb954bbeca039706
 /etc/fonts/conf.avail/25-unhint-nonlatin.conf a755ea93d91a116223ee0a6f2179e7da
 /etc/fonts/conf.avail/30-metric-aliases.conf 75c9e9472b8d86398bb90aad2f9f33ef
 /etc/fonts/conf.avail/40-nonlatin.conf 20ee0ed0c5d5ec9e1cf840861654e5b9
 /etc/fonts/conf.avail/45-generic.conf e5a3f4b8d89676c4f6e24e78fa0ab226
 /etc/fonts/conf.avail/45-latin.conf 78e96661b2e081a6855194cdbfbd414b
 /etc/fonts/conf.avail/49-sansserif.conf ddb0852326b96387179f833fce3fff61
 /etc/fonts/conf.avail/50-user.conf ef75f810654a94c9735c63ba050c3000
 /etc/fonts/conf.avail/51-local.conf 05120737595ec804f105e86a2c2f10df
 /etc/fonts/conf.avail/53-monospace-lcd-filter.conf 94669e241a96e50d95cdd4b126e43ec6
 /etc/fonts/conf.avail/60-generic.conf 36818672366678a1242830b5e7829aef
 /etc/fonts/conf.avail/60-latin.conf 4b9c621952455f0e19eaa91fe40ab01b
 /etc/fonts/conf.avail/65-fonts-persian.conf 3c3369d2e5cddac97685a35f923cd8ae
 /etc/fonts/conf.avail/65-khmer.conf 2c60845ccef2f9fb278dbc776f852e7b
 /etc/fonts/conf.avail/65-nonlatin.conf b4b7785deb1beea8d134f47f5230ba36
 /etc/fonts/conf.avail/69-unifont.conf d01fe25b8869985f337a7d90704cefe6
 /etc/fonts/conf.avail/70-force-bitmaps.conf 05da482c17d5c285ec2cf7134c8f6c5a
 /etc/fonts/conf.avail/70-no-bitmaps.conf 1b7c38fe5f2e26c4581332c90cc1277f
 /etc/fonts/conf.avail/70-yes-bitmaps.conf 91c414090c7d8bfe557785fe845cb6bd
 /etc/fonts/conf.avail/80-delicious.conf ddad25ea4458fffa36d7a1f2f53bc5e9
 /etc/fonts/conf.avail/90-synthetic.conf e79defb0b94fe9d0a9af39c83e48b9dc
 /etc/fonts/conf.d/README 42d13304ed2e9e5b60b74d6ed29b3729
 /etc/fonts/fonts.conf 1a6ebc792c61d5944c30e1696446f5d4
Description: generic font configuration library - configuration
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the configuration files and scripts for fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>

Package: fonts-dejavu-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2954
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-2build1
Conffiles:
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad
 /etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c
 /etc/fonts/conf.avail/57-dejavu-sans-mono.conf b9a76edd2aeb35cd1095e378963e2cdd
 /etc/fonts/conf.avail/57-dejavu-sans.conf 2156c2353cfcc81f33150cf889193c28
 /etc/fonts/conf.avail/57-dejavu-serif.conf 2604487cb2eee1bdb7010ea716faf408
 /etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc
 /etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205
 /etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the sans, sans-bold, serif, serif-bold,
 mono and mono-bold variants. For additional variants, see the
 fonts-dejavu-extra package.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Original-Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Homepage: https://dejavu-fonts.github.io/

Package: fonts-dejavu-extra
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 7493
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-2build1
Depends: fonts-dejavu-core
Description: Vera font family derivate with additional characters (extra variants)
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package includes additional variants, such as oblique, italic,
 bold-oblique, bold-italic and the condensed forms.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Original-Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Homepage: https://dejavu-fonts.github.io/

Package: fonts-droid-fallback
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 7347
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fonts-android
Version: 1:6.0.1r16-1.1build1
Replaces: fonts-droid (<< 1:6.0.0r26-1~)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: fonts-noto-mono
Suggests: fonts-noto
Breaks: fonts-droid (<< 1:6.0.0r26-1~)
Conffiles:
 /etc/fonts/conf.avail/65-droid-sans-fallback.conf b53978fe17be3c725aa002da2496257c
Description: handheld device font with extensive style and language support (fallback)
 This package provides DroidSans Fallback variants, Fallback and
 FallbackFull.
 .
 Each contains extensive character set coverage including
 Western Europe, Eastern/Central Europe, Baltic, Cyrillic, Greek and
 Turkish support. The Droid Sans regular font also includes support for
 Arabic, Simplified and Traditional Chinese, Hebrew, Japanese, Korean and
 Thai.
 .
 Droid was designed by Ascender's Steve Matteson and hinted to provide
 optimal quality for screen text.
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: https://android.googlesource.com/platform/frameworks/base/

Package: fonts-lato
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 11750
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.0-2.1
Pre-Depends: dpkg (>= 1.15.6~)
Description: sans-serif typeface family font
 This package provides sans-serif typeface family font designed by
 Lukasz Dziedzic. ("Lato" means "Summer" in Polish). These fonts are
 published by author's foundry tyPoland under terms of Open Font License.
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: http://www.latofonts.com

Package: fonts-noto-mono
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 1160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-1build1
Replaces: fonts-noto-core (<< 20201027-2~), fonts-noto-unhinted (<< 20201027-3~)
Breaks: fonts-noto-core (<< 20201027-2~), fonts-noto-unhinted (<< 20201027-3~)
Enhances: fonts-noto-core
Conffiles:
 /etc/fonts/conf.avail/30-droid-noto-mono.conf 3637d988826c19a1859d29b79ee01e87
Description: "No Tofu" monospaced font family with large Unicode coverage
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains Noto Mono font family
 (formerly known as Droid Mono),
 and core weights for the Noto Sans Mono font family.
 Beware that Noto Mono has a much smaller repertoire
 than Noto Sans or Noto Serif.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Homepage: https://www.google.com/get/noto/

Package: fonts-urw-base35
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 11095
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20200910-1
Suggests: fonts-freefont-otf | fonts-freefont-ttf, fonts-texgyre
Description: font set metric-compatible with the 35 PostScript Level 2 Base Fonts
 A commercial-quality set of PostScript Type 1 fonts, metric-compatible
 with the 35 PostScript Language Level 2 Base Fonts. This package contains
 outlines in .t1 format and metrics in .afm format of the following fonts:
 .
  C059
  D050000L
  Nimbus Mono PS
  Nimbus Roman
  Nimbus Sans
  Nimbus Sans Narrow
  P052
  Standard Symbols PS
  URW Bookman
  URW Gothic
  Z003
 .
 Extensive remakes of these fonts in the OpenType format are available in the
 GUST TeX Gyre collection in the fonts-texgyre package. The Cyrillic glyphs
 added to the now obsolete urwcyr fork of these fonts have been merged into
 the GNU FreeFont collection available in the fonts-freefont-otf or
 fonts-freefont-ttf packages.
Original-Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Homepage: https://github.com/ArtifexSoftware/urw-base35-fonts

Package: friendly-recovery
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.2.42
Depends: systemd-sysv, whiptail
Recommends: gettext-base, update-manager-core
Breaks: grub2 (<< 1.99-12ubuntu4), initramfs-tools (<< 0.99ubuntu4), upstart (<< 1.3-0ubuntu9)
Description: Make recovery boot mode more user-friendly
 Make the recovery boot mode more user-friendly by providing a menu
 with pluggable options.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: ftp
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: tnftp
Version: 20210827-4build1
Replaces: ftp (<= 0.17-35)
Depends: tnftp
Description: dummy transitional package for tnftp
 This is a dummy transitional package transitioning ftp to tnftp.
Homepage: http://en.wikipedia.org/wiki/Tnftp
Original-Maintainer: xiao sheng wen <atzlinux@sina.com>

Package: fuse
Status: deinstall ok config-files
Priority: optional
Section: utils
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.9.9-3
Config-Version: 2.9.9-3
Depends: libc6 (>= 2.28), libfuse2 (= 2.9.9-3), adduser, mount (>= 2.19.1), sed (>= 4)
Conffiles:
 /etc/fuse.conf 298587592c8444196833f317def414f2 obsolete
Description: Filesystem in Userspace
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://github.com/libfuse/libfuse/wiki

Package: fuse3
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.10.5-1build1
Replaces: fuse
Provides: fuse (= 3.10.5-1build1)
Depends: libc6 (>= 2.34), libfuse3-3 (= 3.10.5-1build1), adduser, mount (>= 2.19.1), sed (>= 4), lsb-base (>= 3.2-14)
Breaks: fuse
Conffiles:
 /etc/fuse.conf ba9c9667f7df01ae7081d2c05d1d24e6
Description: Filesystem in Userspace (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://github.com/libfuse/libfuse/wiki

Package: g++
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 16
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-defaults (1.193ubuntu1)
Version: 4:11.2.0-1ubuntu1
Provides: c++-compiler, g++-x86-64-linux-gnu (= 4:11.2.0-1ubuntu1)
Depends: cpp (= 4:11.2.0-1ubuntu1), gcc (= 4:11.2.0-1ubuntu1), g++-11 (>= 11.2.0-1~), gcc-11 (>= 11.2.0-1~)
Suggests: g++-multilib
Description: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This is a dependency package providing the default GNU C++ compiler.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: g++-11
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 28887
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04.2
Provides: c++-compiler, c++abi2-dev
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04.2), gcc-11 (= 11.4.0-1ubuntu1~22.04.2), libstdc++-11-dev (= 11.4.0-1ubuntu1~22.04.2), libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Suggests: g++-11-multilib, gcc-11-doc (>= 11)
Description: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: galera-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1791
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 26.4.9-1build1
Replaces: galera-3 (<< 26.4)
Provides: galera4, percona-xtradb-cluster-galera-26, wsrep
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 11)
Breaks: galera-3 (<< 26.4)
Conflicts: garbd-2, garbd-3, garbd2, garbd3, percona-galera-3, percona-galera-4, percona-xtradb-cluster-galera, percona-xtradb-cluster-galera-2.x, percona-xtradb-cluster-galera-3.x, percona-xtradb-cluster-galera-4.x, percona-xtradb-cluster-garbd-2.x, percona-xtradb-cluster-garbd-3.x
Description: Replication framework for transactional applications
 Galera is a fast synchronous multimaster wsrep provider (replication engine)
 for transactional databases and similar applications. For more information
 about wsrep API see https://github.com/codership/wsrep-API. For a description
 of Galera replication engine see http://galeracluster.com.
 .
 This package contains the Galera library/plugin.
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Homepage: https://www.galeracluster.com/

Package: gamin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.1.10-6
Depends: libc6 (>= 2.28), libglib2.0-0 (>= 2.35.9), libgamin0 (= 0.1.10-6)
Conflicts: fam
Conffiles:
 /etc/gamin/gaminrc 5b53411b4716625a20369a05110a5fd1
Description: File and directory monitoring system
 Gamin is a file and directory monitoring system which allows
 applications to detect when a file or a directory has been added,
 removed or modified by somebody else.
 .
 It can be used by desktops like KDE, GNOME or Xfce to have their
 virtual file systems keep track of changes to files and directories.
 For example, if a file manager displays a directory to the user, and
 the user removes one of the files via the command-line, gamin will
 notify the file manager of this change so that it can update the
 directory display.
 .
 Gamin has been designed as a drop-in replacement for FAM with security
 and maintainability in mind and can use Linux's advanced inotify
 service when available.
Original-Maintainer: Michael Banck <mbanck@debian.org>

Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 1680
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.1.0-1ubuntu0.1
Provides: awk
Pre-Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libmpfr6 (>= 3.1.3), libreadline8 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Conffiles:
 /etc/profile.d/gawk.csh b3d9e29a36f945b2065b2f88d18dadaa
 /etc/profile.d/gawk.sh bfc054c0862d0fad98ca641b951c7061
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/
Original-Maintainer: Adrian Bunk <bunk@debian.org>

Package: gcc
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-defaults (1.193ubuntu1)
Version: 4:11.2.0-1ubuntu1
Provides: c-compiler, gcc-x86-64-linux-gnu (= 4:11.2.0-1ubuntu1)
Depends: cpp (= 4:11.2.0-1ubuntu1), gcc-11 (>= 11.2.0-1~)
Recommends: libc6-dev | libc-dev
Suggests: gcc-multilib, make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc
Conflicts: gcc-doc (<< 1:2.95.3)
Description: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 This is a dependency package providing the default GNU C compiler.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: gcc-10-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 271
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-10
Version: 10.5.0-1ubuntu1~22.04.2
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: gcc-11
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 52747
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 11.4.0-1ubuntu1~22.04.2
Replaces: cpp-11 (<< 7.1.1-8)
Provides: c-compiler
Depends: cpp-11 (= 11.4.0-1ubuntu1~22.04.2), gcc-11-base (= 11.4.0-1ubuntu1~22.04.2), libcc1-0 (>= 11.4.0-1ubuntu1~22.04.2), binutils (>= 2.38), libgcc-11-dev (= 11.4.0-1ubuntu1~22.04.2), libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgmp10 (>= 2:6.2.1+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libstdc++6 (>= 5), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Recommends: libc6-dev (>= 2.13-0ubuntu6)
Suggests: gcc-11-multilib, gcc-11-doc (>= 11), gcc-11-locales (>= 11)
Description: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: gcc-11-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 273
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04.2
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: gcc-12-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 272
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 284
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gettext
Version: 0.21-4ubuntu4
Depends: libc6 (>= 2.34)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.
Homepage: https://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: gfortran
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 15
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-defaults (1.193ubuntu1)
Version: 4:11.2.0-1ubuntu1
Provides: fortran-compiler, gfortran-mod-15
Depends: cpp (= 4:11.2.0-1ubuntu1), gcc (= 4:11.2.0-1ubuntu1), gfortran-11 (>= 11.2.0-1~)
Suggests: gfortran-multilib, gfortran-doc
Description: GNU Fortran 95 compiler
 This is the GNU Fortran 95 compiler, which compiles Fortran 95 on platforms
 supported by the gcc compiler. It uses the gcc backend to generate optimized
 code.
 .
 This is a dependency package providing the default GNU Fortran 95 compiler.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: gfortran-11
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 28859
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04.2
Provides: fortran95-compiler, gfortran-mod-15
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04.2), gcc-11 (= 11.4.0-1ubuntu1~22.04.2), libgfortran-11-dev (= 11.4.0-1ubuntu1~22.04.2), libc6-dev (>= 2.13-0ubuntu6), libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Suggests: gfortran-11-multilib, gfortran-11-doc, libcoarrays-dev
Description: GNU Fortran compiler
 This is the GNU Fortran compiler, which compiles
 Fortran on platforms supported by the gcc compiler. It uses the
 gcc backend to generate optimized code.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: ghostscript
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 237
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 9.55.0~dfsg1-0ubuntu5.13
Provides: postscript-viewer
Depends: libgs9 (= 9.55.0~dfsg1-0ubuntu5.13), libc6 (>= 2.34)
Suggests: ghostscript-x
Description: interpreter for the PostScript language and for PDF
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview, it can display
 PostScript and PDF documents in an X11 environment.
 .
 Furthermore, it can render PostScript and PDF files as graphics to be
 printed on non-PostScript printers. Supported printers include common
 dot-matrix, inkjet and laser models.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>

Package: gir1.2-glib-2.0
Status: install ok installed
Priority: important
Section: introspection
Installed-Size: 677
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.72.0-1
Provides: gir1.2-gio-2.0 (= 1.72.0-1), gir1.2-girepository-2.0 (= 1.72.0-1), gir1.2-gmodule-2.0 (= 1.72.0-1), gir1.2-gobject-2.0 (= 1.72.0-1)
Depends: libgirepository-1.0-1 (>= 1.72.0), libglib2.0-0 (>= 2.71.2)
Description: Introspection data for GLib, GObject, Gio and GModule
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 GObject Introspection contains tools to generate and handle the
 introspection data.
 .
 This package contains the introspection data for the GLib, GObject,
 GModule and Gio libraries.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: gir1.2-packagekitglib-1.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: packagekit
Version: 1.2.5-2ubuntu3
Depends: gir1.2-glib-2.0 (>= 1.36), libpackagekit-glib2-18 (>= 1.2.5)
Description: GObject introspection data for the PackageKit GLib library
 PackageKit allows performing simple software management tasks over a DBus
 interface e.g. refreshing the cache, updating, installing and removing
 software packages or searching for multimedia codecs and file handlers.
 .
 This package contains introspection data for the PackageKit
 GLib interface library.
 .
 It can be used by packages using the GIRepository format to generate
 dynamic bindings.
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <mak@debian.org>

Package: git
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 18484
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:2.34.1-1ubuntu1.15
Provides: git-completion, git-core
Depends: libc6 (>= 2.34), libcurl3-gnutls (>= 7.56.1), libexpat1 (>= 2.0.1), libpcre2-8-0 (>= 10.34), zlib1g (>= 1:1.2.0), perl, liberror-perl, git-man (>> 1:2.34.1), git-man (<< 1:2.34.1-.)
Recommends: ca-certificates, patch, less, ssh-client
Suggests: gettext-base, git-daemon-run | git-daemon-sysvinit, git-doc, git-email, git-gui, gitk, gitweb, git-cvs, git-mediawiki, git-svn
Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), dgit (<< 5.1~), git-buildpackage (<< 0.6.5), git-el (<< 1:2.32.0~rc2-1~), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), guilt (<< 0.33), openssh-client (<< 1:6.8), stgit (<< 0.15), stgit-contrib (<< 0.15)
Conffiles:
 /etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6
Description: fast, scalable, distributed revision control system
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides the git main components with minimal dependencies.
 Additional functionality, e.g. a graphical user interface and revision
 tree visualizer, tools for interoperating with other VCS's, or a web
 interface, is provided as separate git* packages.
Homepage: https://git-scm.com/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>

Package: git-man
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 1960
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: git
Version: 1:2.34.1-1ubuntu1.15
Description: fast, scalable, distributed revision control system (manual pages)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides reference documentation for use by the 'man'
 utility and the 'git help' command.
Homepage: https://git-scm.com/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>

Package: gitlab-runner-helper-images
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 531079
Maintainer: GitLab Inc. <support@gitlab.com>
Architecture: all
Version: 18.7.2-1
Replaces: gitlab-runner
Provides: gitlab-runner-helper-images
Description: GitLab Runner Helper Docker Images
License: MIT
Vendor: GitLab Inc.
Homepage: https://gitlab.com/gitlab-org/gitlab-runner

Package: glib-networking
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 228
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 2.72.0-1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.69.0), libgnutls30 (>= 3.7.3), libproxy1v5 (>= 0.4.17), glib-networking-services (>= 2.72.0-1), glib-networking-services (<< 2.72.0-1.1~), glib-networking-common (>= 2.72.0-1), gsettings-desktop-schemas
Breaks: balsa (<< 2.6.0-2ubuntu0.1), libsoup2.4-tests (<< 2.71.1-1~)
Description: network-related giomodules for GLib
 This package contains various network related extensions for the GIO
 library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: glib-networking-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: glib-networking
Version: 2.72.0-1
Recommends: glib-networking
Description: network-related giomodules for GLib - data files
 This package contains data files and translations for the GIO network
 extensions in glib-networking.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: glib-networking-services
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glib-networking
Version: 2.72.0-1
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.69.0), libproxy1v5 (>= 0.4.17), glib-networking-common (>= 2.72.0-1)
Recommends: glib-networking
Description: network-related giomodules for GLib - D-Bus services
 This package contains D-Bus services that are used by the GIO network
 extensions in glib-networking, for actions that need to be done in a
 separate process.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: gnupg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 473
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Replaces: gnupg2 (<< 2.1.11-7+exp1)
Depends: dirmngr (<< 2.2.27-3ubuntu2.5.1~), dirmngr (>= 2.2.27-3ubuntu2.5), gnupg-l10n (= 2.2.27-3ubuntu2.5), gnupg-utils (<< 2.2.27-3ubuntu2.5.1~), gnupg-utils (>= 2.2.27-3ubuntu2.5), gpg (<< 2.2.27-3ubuntu2.5.1~), gpg (>= 2.2.27-3ubuntu2.5), gpg-agent (<< 2.2.27-3ubuntu2.5.1~), gpg-agent (>= 2.2.27-3ubuntu2.5), gpg-wks-client (<< 2.2.27-3ubuntu2.5.1~), gpg-wks-client (>= 2.2.27-3ubuntu2.5), gpg-wks-server (<< 2.2.27-3ubuntu2.5.1~), gpg-wks-server (>= 2.2.27-3ubuntu2.5), gpgsm (<< 2.2.27-3ubuntu2.5.1~), gpgsm (>= 2.2.27-3ubuntu2.5), gpgv (<< 2.2.27-3ubuntu2.5.1~), gpgv (>= 2.2.27-3ubuntu2.5)
Suggests: parcimonie, xloadimage
Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.2.27-3ubuntu2.5), gnupg2 (<< 2.1.11-7+exp1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4)
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the full suite of GnuPG tools for cryptographic
 communications and data storage.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: gnupg-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 392
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Replaces: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Breaks: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Enhances: dirmngr, gpg, gpg-agent
Description: GNU privacy guard - localization files
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 This package contains the translation files for the use of GnuPG in
 non-English locales.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: gnupg-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 787
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libksba8 (>= 1.3.5), libreadline8 (>= 6.0), zlib1g (>= 1:1.1.4)
Recommends: gpg, gpg-agent, gpgconf, gpgsm
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - utility programs
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains several useful utilities for manipulating
 OpenPGP data and other related cryptographic elements.  It includes:
 .
  * addgnupghome -- create .gnupg home directories
  * applygnupgdefaults -- run gpgconf --apply-defaults for all users
  * gpgcompose -- an experimental tool for constructing arbitrary
                  sequences of OpenPGP packets (e.g. for testing)
  * gpgparsemail -- parse an e-mail message into annotated format
  * gpgsplit -- split a sequence of OpenPGP packets into files
  * gpgtar -- encrypt or sign files in an archive
  * kbxutil -- list, export, import Keybox data
  * lspgpot -- convert PGP ownertrust values to GnuPG
  * migrate-pubring-from-classic-gpg -- use only "modern" formats
  * symcryptrun -- use simple symmetric encryption tool in GnuPG framework
  * watchgnupg -- watch socket-based logs
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: gpg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Replaces: gnupg (<< 2.1.21-4)
Depends: gpgconf (= 2.2.27-3ubuntu2.5), libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libreadline8 (>= 6.0), libsqlite3-0 (>= 3.7.15), zlib1g (>= 1:1.1.4)
Recommends: gnupg (= 2.2.27-3ubuntu2.5)
Breaks: gnupg (<< 2.1.21-4)
Description: GNU Privacy Guard -- minimalist public key operations
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains /usr/bin/gpg itself, and is useful on its own
 only for public key operations (encryption, signature verification,
 listing OpenPGP certificates, etc).  If you want full capabilities
 (including secret key operations, network access, etc), please
 install the "gnupg" package, which pulls in the full suite of tools.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: gpg-agent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 595
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Replaces: gnupg-agent (<< 2.1.21-4)
Provides: gnupg-agent
Depends: gpgconf (= 2.2.27-3ubuntu2.5), pinentry-curses | pinentry, init-system-helpers (>= 1.52), libassuan0 (>= 2.5.1), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libnpth0 (>= 0.90)
Recommends: gnupg (= 2.2.27-3ubuntu2.5)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon
Breaks: gnupg-agent (<< 2.1.21-4)
Conffiles:
 /etc/X11/Xsession.d/90gpg-agent fbb9ce5e8e4ba5727090f0aa51b61a82
 /etc/logcheck/ignore.d.server/gpg-agent 2d0fbc91a955ba69408ca033d7ae2455
Description: GNU privacy guard - cryptographic agent
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the agent program gpg-agent which handles all
 secret key material for OpenPGP and S/MIME use.  The agent also
 provides a passphrase cache, which is used by pre-2.1 versions of
 GnuPG for OpenPGP operations.  Without this package, trying to do
 secret-key operations with any part of the modern GnuPG suite will
 fail.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: gpg-wks-client
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 184
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Depends: dirmngr (= 2.2.27-3ubuntu2.5), gpg (= 2.2.27-3ubuntu2.5), gpg-agent (= 2.2.27-3ubuntu2.5), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42)
Recommends: gnupg (= 2.2.27-3ubuntu2.5)
Description: GNU privacy guard - Web Key Service client
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package provides the GnuPG client for the Web Key Service
 protocol.
 .
 A Web Key Service is a service that allows users to upload keys per
 mail to be verified over https as described in
 https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
 .
 For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: gpg-wks-server
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 168
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Depends: gpg (= 2.2.27-3ubuntu2.5), gpg-agent (= 2.2.27-3ubuntu2.5), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42)
Recommends: gnupg (= 2.2.27-3ubuntu2.5)
Description: GNU privacy guard - Web Key Service server
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package provides the GnuPG server for the Web Key Service
 protocol.
 .
 A Web Key Service is a service that allows users to upload keys per
 mail to be verified over https as described in
 https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
 .
 For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: gpgconf
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 280
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libreadline8 (>= 6.0)
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - core configuration utilities
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains core utilities used by different tools in the
 suite offered by GnuPG.  It can be used to programmatically edit
 config files for tools in the GnuPG suite, to launch or terminate
 per-user daemons (if installed), etc.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: gpgsm
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 480
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Replaces: gnupg2 (<< 2.1.10-2)
Depends: gpgconf (= 2.2.27-3ubuntu2.5), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), libksba8 (>= 1.6.0), libreadline8 (>= 6.0)
Recommends: gnupg (= 2.2.27-3ubuntu2.5)
Breaks: gnupg2 (<< 2.1.10-2)
Description: GNU privacy guard - S/MIME version
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the gpgsm program. gpgsm is a tool to provide
 digital encryption and signing services on X.509 certificates and the
 CMS protocol. gpgsm includes complete certificate management.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 324
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.27-3ubuntu2.5
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgpg-error0 (>= 1.42), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 496
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.7-1build1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.34), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://www.gnu.org/software/grep/

Package: groff
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 11680
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.22.4-8build1
Provides: groff-x11, jgroff
Depends: groff-base (= 1.22.4-8build1), libc6 (>= 2.35), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 4.1.1), libx11-6, libxaw7 (>= 2:1.0.14), libxmu6 (>= 2:1.1.3), libxt6
Recommends: ghostscript, imagemagick, libpaper1, netpbm, perl, psutils
Conffiles:
 /etc/X11/app-defaults/GXditview ee0e9f38fdf99c32c77a89cd67b8ac03
 /etc/X11/app-defaults/GXditview-color 753a00fce7fa986c812c517b8bb2680e
Description: GNU troff text-formatting system
 This package contains optional components of the GNU troff text-formatting
 system. The core package, groff-base, contains the traditional tools like
 troff, nroff, tbl, eqn, and pic. This package contains additional devices
 and drivers for output to DVI, HTML (when recommended packages are
 installed - see below), PDF, HP LaserJet printers, and Canon CAPSL LBP-4
 and LBP-8 printers.
 .
 The X75, X75-12, X100, and X100-12 devices, which allow groff output to be
 conveniently viewed on an X display using the standard X11 fonts, are now
 included here. They were previously in a separate package, groff-x11.
 .
 Besides these, the groff package contains man pages describing the language
 and its macro sets, info documentation, and a number of supplementary
 programs:
 .
  - gxditview, which is used to display the output of the X* devices, and
    can also be used to view PostScript output from groff;
  - grn, a preprocessor for pictures in the 'gremlin' format;
  - tfmtodit, which creates font files for use with 'groff -Tdvi';
  - hpftodit, which creates font files for use with 'groff -Tlj4';
  - afmtodit, which creates font files for use with 'groff -Tps';
  - refer, which preprocesses bibliographic references for use with groff;
  - indxbib, which creates inverted indices for bibliographic databases used
    by 'refer';
  - lkbib and lookbib, which search bibliographic databases;
  - addftinfo, which adds metric information to troff font files for use
    with groff;
  - pfbtops, which translates a PostScript font in .pfb format to ASCII for
    use with groff;
  - mmroff, a simple groff preprocessor which expands references in mm;
  - pic2graph, which converts PIC diagrams into cropped image files;
  - eqn2graph, which converts EQN equations into cropped image files;
  - pdfmom, which runs 'groff -mom' to produce PDFs.
 .
 All the standard macro packages are supported.
 .
 Some facilities only work if certain recommended packages are installed:
 .
  - ghostscript, netpbm, psutils: required for HTML output;
  - imagemagick: required for the pic2graph and eqn2graph programs;
  - libpaper1: paper size detection in dvi, lbp, lj4, and ps devices (falls
    back to a4 if not installed);
  - perl: required for PDF output and for the chem preprocessor.
Homepage: https://www.gnu.org/software/groff/

Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 3444
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.22.4-8build1
Depends: libc6 (>= 2.35), libgcc-s1 (>= 4.0), libstdc++6 (>= 4.1.1), libuchardet0 (>= 0.0.1)
Suggests: groff
Conffiles:
 /etc/groff/man.local e6591616404c7c443f71ff21d27430d7
 /etc/groff/mdoc.local 4bc6267468942826b757fa2f868c8237
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.
Homepage: https://www.gnu.org/software/groff/

Package: grub-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 13836
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-2ubuntu7.2
Replaces: grub-coreboot (<< 2.00-4), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 2.00-4), grub-efi-ia32 (<< 2.00-4), grub-efi-ia64 (<< 2.00-4), grub-ieee1275 (<< 2.00-4), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 2.00-4), grub-yeeloong (<< 2.00-4), init-select
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1 (>= 37), libefivar1 (>= 37), libfreetype6 (>= 2.2.1), libfuse3-3 (>= 3.2.3), liblzma5 (>= 5.1.1alpha+20120614), debconf (>= 0.5) | debconf-2.0, gettext-base, lsb-base (>= 3.0-6)
Recommends: os-prober (>= 1.33)
Suggests: multiboot-doc, grub-emu, mtools, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6), console-setup
Breaks: apport (<< 2.1.1), friendly-recovery (<< 0.2.13), lupin-support (<< 0.55), mdadm (<< 2.6.7-2)
Conflicts: init-select
Conffiles:
 /etc/default/grub.d/init-select.cfg 86dea2a78312ca80f740098987d9c0fb
 /etc/grub.d/00_header 45fa2922d33747051f7c4851c47d5433
 /etc/grub.d/05_debian_theme 7af00bf2d834b3104688c9cbf40b23b3
 /etc/grub.d/10_linux 87616b972cb05affb4bf070fbbeb0ba8
 /etc/grub.d/10_linux_zfs 4d36031aeaefd045f9fb5cddc286d626
 /etc/grub.d/20_linux_xen 377fd624ba5c0271364d47efed2c683f
 /etc/grub.d/30_os-prober b42d75841ee60a0715198a276452da89
 /etc/grub.d/30_uefi-firmware ed41aff510f9176cdbbecfe1a964e4c5
 /etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11
 /etc/grub.d/41_custom 1d876baff8ca3841aa6ba057e881a2e4
 /etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f
 /etc/init.d/grub-common 561b38cf0171ef9aa41954dad9ec6b3c
 /etc/pm/sleep.d/10_grub-common bc63b0c6613e95979446d17a88875d6a
Description: GRand Unified Bootloader (common files)
 This package contains common files shared by the distinct flavours of GRUB.
 It is shared between GRUB Legacy and GRUB 2, although a number of files
 specific to GRUB 2 are here as long as they do not break GRUB Legacy.
 .
 grub-mkrescue needs the suggested packages mtools (for UEFI targets) and
 xorriso.
Built-Using: lzo2 (= 2.10-2build3)
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>

Package: grub-gfxpayload-lists
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 47
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: amd64
Version: 0.7
Depends: grub-pc (>= 1.99~20101210-1ubuntu2)
Description: GRUB gfxpayload blacklist
 The 'set gfxpayload=keep' facility in GRUB provides smooth graphical
 handover to the Linux kernel.  Unfortunately, this does not work on all
 systems, resulting in a black or corrupt display.  This package provides a
 blacklist of PCI IDs which fail.
 .
 We maintain this separately from GRUB because it is likely to be updated on
 a different schedule.

Package: grub-pc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 561
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-2ubuntu7.2
Replaces: grub, grub-common (<= 1.97~beta2-1), grub-coreboot, grub-efi-amd64, grub-efi-ia32, grub-ieee1275, grub-legacy, grub2 (<< 2.06-2ubuntu7.2)
Depends: debconf (>= 0.5) | debconf-2.0, grub-common (= 2.06-2ubuntu7.2), grub2-common (= 2.06-2ubuntu7.2), grub-pc-bin (= 2.06-2ubuntu7.2), ucf, grub-gfxpayload-lists
Conflicts: grub (<< 0.97-54), grub-coreboot, grub-efi-amd64, grub-efi-ia32, grub-ieee1275, grub-legacy, grub-xen
Description: GRand Unified Bootloader, version 2 (PC/BIOS version)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
  - VESA-based graphical mode with background image support and complete 24-bit
    color set.
  - Support for extended charsets.  Users can write UTF-8 text to their menu
    entries.
 .
 This is a dependency package for a version of GRUB that has been built for
 use with the traditional PC/BIOS architecture.  Installing this package
 indicates that this version of GRUB should be the active boot loader.
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>

Package: grub-pc-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3108
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-2ubuntu7.2
Replaces: grub-common (<= 1.97~beta2-1), grub-pc (<< 1.99-1), grub2 (<< 2.06-2ubuntu7.2)
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), grub-common (= 2.06-2ubuntu7.2)
Suggests: desktop-base (>= 4.0.6)
Description: GRand Unified Bootloader, version 2 (PC/BIOS modules)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
  - VESA-based graphical mode with background image support and complete 24-bit
    color set.
  - Support for extended charsets.  Users can write UTF-8 text to their menu
    entries.
 .
 This package contains GRUB modules that have been built for use with the
 traditional PC/BIOS architecture.  It can be installed in parallel with
 other flavours, but will not automatically install GRUB as the active boot
 loader nor automatically update grub.cfg on upgrade unless grub-pc is also
 installed.
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>

Package: grub2-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1354
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-2ubuntu7.2
Replaces: grub, grub-cloud-amd64 (<< 0.0.4), grub-common (<< 1.99-1), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-29ubuntu60), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy, grub-legacy-doc (<< 0.97-29ubuntu60), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7)
Depends: grub-common (= 2.06-2ubuntu7.2), dpkg (>= 1.15.4) | install-info, libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1 (>= 37), libefivar1 (>= 37), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: grub (<< 0.97-54), grub-cloud-amd64 (<< 0.0.4), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-29ubuntu60), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy-doc (<< 0.97-29ubuntu60), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7), shim (<< 0.9+1474479173.6c180c6-0ubuntu1~)
Conflicts: grub-legacy
Conffiles:
 /etc/kernel/postinst.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c
 /etc/kernel/postrm.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c
Description: GRand Unified Bootloader (common files for version 2)
 This package contains common files shared by the distinct flavours of GRUB.
 The files in this package are specific to GRUB 2, and would break GRUB
 Legacy if installed on the same system.
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>

Package: gsettings-desktop-schemas
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 308
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 42.0-1ubuntu1
Depends: dconf-gsettings-backend | gsettings-backend, session-migration
Breaks: gnome-control-center (<< 1:3.19.92), gnome-settings-daemon (<< 3.19.92), gnome-shell (<< 40), mutter (<< 3.31.4), nautilus (<< 3.7.92)
Description: GSettings desktop-wide schemas
 gsettings-desktop-schemas contains a collection of GSettings schemas for
 settings shared by various components of a desktop.
Homepage: https://www.gnome.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: gsfonts
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 4439
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1:8.11+urwcyr1.0.7~pre44-4.5
Conflicts: gs (<< 5.50-5), gs-aladdin (<< 6.50-4), gsfonts-x11 (<< 0.13)
Conffiles:
 /etc/ghostscript/fontmap.d/10gsfonts.conf 39b53e1126184b434b52585a113fe125
Description: Fonts for the Ghostscript interpreter(s)
 These are free look-alike fonts of the Adobe PostScript fonts.
 Recommended for all flavors of Ghostscript (gs-gpl, gs-afpl and gs-esp).
Original-Maintainer: Masayuki Hatta (mhatta) <mhatta@debian.org>
Homepage: http://www.ghostscript.com/

Package: gstreamer1.0-gl
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 413
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gst-plugins-base1.0
Version: 1.20.1-1ubuntu0.5
Replaces: gstreamer1.0-plugins-bad (<< 1.15.1)
Provides: gstreamer1.0-videosink, gstreamer1.0-videosource
Depends: libc6 (>= 2.27), libglib2.0-0 (>= 2.56), libgraphene-1.0-0 (>= 1.5.4), libgstreamer-gl1.0-0 (>= 1.20.0), libgstreamer-plugins-base1.0-0 (>= 1.20.0), libgstreamer1.0-0 (>= 1.20.0), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libx11-6
Breaks: gstreamer1.0-plugins-bad (<< 1.15.1)
Description: GStreamer plugins for GL
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains the GStreamer plugins for GL.
Homepage: https://gstreamer.freedesktop.org
Gstreamer-Elements: glalpha, glcolorbalance, glcolorconvert, glcolorscale, gldeinterlace, gldifferencematte, gldownload, gleffects, gleffects_blur, gleffects_bulge, gleffects_fisheye, gleffects_glow, gleffects_heat, gleffects_identity, gleffects_laplacian, gleffects_lumaxpro, gleffects_mirror, gleffects_sepia, gleffects_sin, gleffects_sobel, gleffects_square, gleffects_squeeze, gleffects_stretch, gleffects_tunnel, gleffects_twirl, gleffects_xpro, gleffects_xray, glfilterapp, glfilterbin, glfiltercube, glfilterglass, glimagesink, glimagesinkelement, glmixerbin, glmosaic, gloverlay, gloverlaycompositor, glshader, glsinkbin, glsrcbin, glstereomix, glstereosplit, gltestsrc, gltransformation, glupload, glvideoflip, glvideomixer, glvideomixerelement, glviewconvert
Gstreamer-Version: 1.20
Original-Maintainer: Maintainers of GStreamer packages <gst-plugins-base1.0@packages.debian.org>

Package: gstreamer1.0-plugins-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2400
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gst-plugins-base1.0
Version: 1.20.1-1ubuntu0.5
Replaces: gstreamer1.0-plugins-bad (<< 1.15.1)
Provides: gstreamer1.0-audiosource, gstreamer1.0-videosource
Depends: libc6 (>= 2.33), libcdparanoia0 (>= 3.10.2+debian), libglib2.0-0 (>= 2.67.3), libgstreamer-plugins-base1.0-0 (>= 1.20.0), libgstreamer1.0-0 (>= 1.20.0), libogg0 (>= 1.0rc3), libopus0 (>= 1.1), liborc-0.4-0 (>= 1:0.4.25), libtheora0 (>= 1.1), libvisual-0.4-0 (>= 0.4.0), libvorbis0a (>= 1.3.1), libvorbisenc2 (>= 1.3.1)
Suggests: gvfs
Breaks: gstreamer1.0-plugins-bad (<< 1.15.1)
Description: GStreamer plugins from the "base" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains the GStreamer plugins from the "base" set, an
 essential exemplary set of elements.
Homepage: https://gstreamer.freedesktop.org
Gstreamer-Decoders: application/kate; application/ogg; application/x-ass; application/x-ogg-avi; application/x-ogm-audio; application/x-ogm-text; application/x-ogm-video; application/x-ssa; application/x-subtitle; application/x-subtitle-dks; application/x-subtitle-lrc; application/x-subtitle-mpl2; application/x-subtitle-qttext; application/x-subtitle-sami; application/x-subtitle-tmplayer; application/x-subtitle-vtt; audio/ogg; audio/x-opus, channel-mapping-family=(int)[ 1, 255 ], stream-count=(int)[ 1, 255 ], coupled-count=(int)[ 0, 255 ]; audio/x-opus, channel-mapping-family=(int)0; audio/x-unaligned-raw, format=(string){ F64LE, F64BE, F32LE, F32BE, S32LE, S32BE, U32LE, U32BE, S24_32LE, S24_32BE, U24_32LE, U24_32BE, S24LE, S24BE, U24LE, U24BE, S20LE, S20BE, U20LE, U20BE, S18LE, S18BE, U18LE, U18BE, S16LE, S16BE, U16LE, U16BE, S8, U8 }, layout=(string){ interleaved, non-interleaved }; audio/x-vorbis; video/ogg; video/x-theora; video/x-unaligned-raw, format=(string){ ABGR64_LE, BGRA64_LE, AYUV64, ARGB64_LE, ARGB64, RGBA64_LE, ABGR64_BE, BGRA64_BE, ARGB64_BE, RGBA64_BE, GBRA_12LE, GBRA_12BE, Y412_LE, Y412_BE, A444_10LE, GBRA_10LE, A444_10BE, GBRA_10BE, A422_10LE, A422_10BE, A420_10LE, A420_10BE, RGB10A2_LE, BGR10A2_LE, Y410, GBRA, ABGR, VUYA, BGRA, AYUV, ARGB, RGBA, A420, AV12, Y444_16LE, Y444_16BE, v216, P016_LE, P016_BE, Y444_12LE, GBR_12LE, Y444_12BE, GBR_12BE, I422_12LE, I422_12BE, Y212_LE, Y212_BE, I420_12LE, I420_12BE, P012_LE, P012_BE, Y444_10LE, GBR_10LE, Y444_10BE, GBR_10BE, r210, I422_10LE, I422_10BE, NV16_10LE32, Y210, v210, UYVP, I420_10LE, I420_10BE, P010_10LE, NV12_10LE32, NV12_10LE40, P010_10BE, Y444, RGBP, GBR, BGRP, NV24, xBGR, BGRx, xRGB, RGBx, BGR, IYU2, v308, RGB, Y42B, NV61, NV16, VYUY, UYVY, YVYU, YUY2, I420, YV12, NV21, NV12, NV12_64Z32, NV12_4L4, NV12_32L32, Y41B, IYU1, YVU9, YUV9, RGB16, BGR16, RGB15, BGR15, RGB8P, GRAY16_LE, GRAY16_BE, GRAY10_LE32, GRAY8 }
Gstreamer-Elements: adder, appsink, appsrc, audioconvert, audiointerleave, audiomixer, audiorate, audioresample, audiotestsrc, cdparanoiasrc, compositor, decodebin, decodebin3, encodebin, encodebin2, giosink, giosrc, giostreamsink, giostreamsrc, liveadder, multifdsink, multisocketsink, oggaviparse, oggdemux, oggmux, oggparse, ogmaudioparse, ogmtextparse, ogmvideoparse, opusdec, opusenc, overlaycomposition, parsebin, playbin, playbin3, playsink, rawaudioparse, rawvideoparse, socketsrc, ssaparse, streamsynchronizer, subparse, subtitleoverlay, tcpclientsink, tcpclientsrc, tcpserversink, tcpserversrc, theoradec, theoraenc, theoraparse, unalignedaudioparse, unalignedvideoparse, uridecodebin, uridecodebin3, urisourcebin, videoconvert, videorate, videoscale, videotestsrc, volume, vorbisdec, vorbisenc, vorbisparse, vorbistag
Gstreamer-Encoders: application/ogg; audio/ogg; audio/x-opus; audio/x-vorbis; video/ogg; video/x-theora
Gstreamer-Uri-Sinks: appsink, file, resource
Gstreamer-Uri-Sources: appsrc, cdda, file, resource
Gstreamer-Version: 1.20
Original-Maintainer: Maintainers of GStreamer packages <gst-plugins-base1.0@packages.debian.org>

Package: gstreamer1.0-plugins-good
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6748
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gst-plugins-good1.0
Version: 1.20.3-0ubuntu1.4
Replaces: gstreamer1.0-plugins-bad (<< 1.15.1), gstreamer1.0-plugins-ugly (<< 1.13.1), gstreamer1.0-pulseaudio (<< 1.18.0)
Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource, gstreamer1.0-videosink, gstreamer1.0-videosource, gstreamer1.0-visualization
Depends: libaa1 (>= 1.4p5), libavc1394-0 (>= 0.5.3), libbz2-1.0, libc6 (>= 2.34), libcaca0 (>= 0.99.beta17-1), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.10.0), libdv4 (>= 1.0.0), libflac8 (>= 1.3.0), libgcc-s1 (>= 3.3.1), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.67.3), libgstreamer-plugins-base1.0-0 (>= 1.20.0), libgstreamer-plugins-good1.0-0 (= 1.20.3-0ubuntu1.4), libgstreamer1.0-0 (>= 1.20.0), libgudev-1.0-0 (>= 147), libiec61883-0 (>= 1.2.0), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libjpeg8 (>= 8c), libmp3lame0 (>= 3.100), libmpg123-0 (>= 1.28.0), liborc-0.4-0 (>= 1:0.4.25), libpng16-16 (>= 1.6.2-1), libpulse0 (>= 2.0), libraw1394-11 (>= 2.1.2), libshout3 (>= 2.2.2), libspeex1 (>= 1.2~beta3-1), libstdc++6 (>= 5), libtag1v5 (>= 1.9.1-2.2~), libtwolame0 (>= 0.3.10), libv4l-0 (>= 0.5.0), libvpx7 (>= 1.10.0), libwavpack1 (>= 4.60), libx11-6, libxdamage1 (>= 1:1.1), libxext6, libxfixes3, zlib1g (>= 1:1.1.4), gstreamer1.0-plugins-base (>= 1.20.0), libsoup2.4-1 (>= 2.48) | libsoup3.0-0
Recommends: gstreamer1.0-x
Breaks: gstreamer1.0-plugins-bad (<< 1.15.1), gstreamer1.0-plugins-ugly (<< 1.13.1), gstreamer1.0-pulseaudio (<< 1.18.0)
Description: GStreamer plugins from the "good" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains the GStreamer plugins from the "good" set, a set
 of good-quality plug-ins under the LGPL license.
Homepage: https://gstreamer.freedesktop.org
Gstreamer-Decoders: application/x-3gp; application/x-apetag; application/x-icy; application/x-id3; application/x-navi-animation; application/x-rtp, media=(string)audio, payload=(int)[ 96, 127 ], encoding-name=(string){ TELEPHONE-EVENT, ISAC, SBC, OPUS, X-GST-OPUS-DRAFT-SPITTKA-00, multiopus }; application/x-rtp, payload=(int)[ 96, 127 ], media=(string){ audio, video }, encoding-name=(string){ X-QT, X-QUICKTIME }; application/x-rtp, media=(string)video, encoding-name=(string)RAW, sampling=(string){ RGB, RGBA, BGR, BGRA, YCbCr-4:4:4, YCbCr-4:2:2, YCbCr-4:2:0, YCbCr-4:1:1 }; application/x-rtp, media=(string){ video, audio, application }, encoding-name=(string)MPEG4-GENERIC, mode=(string){ generic, CELP-cbr, CELP-vbr, AAC-lbr, AAC-hbr, aac-hbr }; application/x-rtp, media=(string)video, sampling=(string){ RGB, BGR, RGBA, BGRA, YCbCrA, YCbCr-4:4:4, YCbCr-4:2:2, YCbCr-4:2:0, YCbCr-4:1:1, GRAYSCALE }, encoding-name=(string)JPEG2000; application/x-rtp, media=(string)video, colorspace=(string){ sRGB, sYUV, GRAY }, encoding-name=(string)JPEG2000; application/x-rtp, media=(string)video, payload=(int)31, encoding-name=(string)H261; application/x-rtp, media=(string)video, payload=(int)[ 96, 127 ], encoding-name=(string)H261; application/x-rtp, media=(string)audio, encoding-name=(string){ AMR, AMR-WB }, octet-align=(string)1; application/x-rtp, media=(string){ video, audio }, encoding-name=(string)DV, encode=(string){ SD-VCR/525-60, SD-VCR/625-50, HD-VCR/1125-60, HD-VCR/1250-50, SDL-VCR/525-60, SDL-VCR/625-50, 306M/525-60, 306M/625-50, 314M-25/525-60, 314M-25/625-50, 314M-50/525-60, 314M-50/625-50 }; application/x-rtp, media=(string)video, encoding-name=(string){ VP9, VP9-DRAFT-IETF-01, VP8, VP8-DRAFT-IETF-01, THEORA, X-SV3V-ES, X-SORENSON-VIDEO, X-SORENSONVIDEO, X-SorensonVideo, MP4V-ES, MP2T, MP2T-ES, MP1S, JPEG, H265, H264, H263, H263-1998, H263-2000, MPV }; application/x-rtp, media=(string)audio, encoding-name=(string){ VORBIS, SPEEX, SIREN, X-QDM, QCELP, MP4A-LATM, L24, L16, L8, MPA-ROBUST, X-MP3-DRAFT-00, X-MP3-DRAFT-01, X-MP3-DRAFT-02, X-MP3-DRAFT-03, X-MP3-DRAFT-04, X-MP3-DRAFT-05, X-MP3-DRAFT-06, MPA, PCMU, PCMA, GSM, G729, G726, G726-16, G726-24, G726-32, G726-40, AAL2-G726-16, AAL2-G726-24, AAL2-G726-32, AAL2-G726-40, G723, G722, ILBC, CELT, BV16, BV32, AC3 }; application/x-rtp, media=(string)audio, payload=(int){ 12, 10, 11, 14, 0, 8, 3, 18, 4, 9 }; application/x-rtp, media=(string)video, payload=(int){ 33, 26, 34, 32 }; application/x-rtp, media=(string)other, encoding-name=(string)MP1S; application/x-rtp, media=(string)application, encoding-name=(string){ SMPTE336M, X-GST }; application/x-subtitle-avi; audio/ac3; audio/mpeg, mpegversion=(int){ 1, 2, 4 }; audio/webm; audio/x-ac3; audio/x-alaw; audio/x-amr-nb-sh; audio/x-amr-wb-sh; audio/x-au; audio/x-dts; audio/x-eac3; audio/x-flac; audio/x-m4a; audio/x-matroska; audio/x-mulaw; audio/x-private1-ac3; audio/x-private1-dts; audio/x-rf64; audio/x-sbc; audio/x-speex; audio/x-wav; audio/x-wavpack; audio/x-wavpack-correction; image/bmp; image/jpeg; image/png; image/svg; image/svg+xml; image/tiff; image/vnd.wap.wbmp; image/x-MS-bmp; image/x-bitmap; image/x-bmp; image/x-cmu-raster; image/x-icon; image/x-pcx; image/x-pixmap; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; image/x-sun-raster; image/x-tga; multipart/x-mixed-replace; video/mj2; video/quicktime; video/webm; video/x-dv, systemstream=(boolean){ false, true }; video/x-fli; video/x-flv; video/x-matroska; video/x-matroska-3d; video/x-msvideo; video/x-vp8; video/x-vp9
Gstreamer-Elements: 3gppmux, aacparse, aasink, aatv, ac3parse, agingtv, alawdec, alawenc, alpha, alphacolor, amrparse, apedemux, apev2mux, aspectratiocrop, asteriskh263, audioamplify, audiochebband, audiocheblimit, audiodynamic, audioecho, audiofirfilter, audioiirfilter, audioinvert, audiokaraoke, audiopanorama, audiowsincband, audiowsinclimit, auparse, autoaudiosink, autoaudiosrc, autovideosink, autovideosrc, avidemux, avimux, avisubtitle, breakmydata, cacasink, cacatv, cairooverlay, camerabin, capssetter, cpureport, cutter, dcaparse, deinterlace, deinterleave, dicetv, dtmfsrc, dv1394src, dvdec, dvdemux, dynudpsink, edgetv, equalizer-10bands, equalizer-3bands, equalizer-nbands, flacdec, flacenc, flacparse, flactag, flvdemux, flvmux, flxdec, gamma, gdkpixbufdec, gdkpixbufoverlay, gdkpixbufsink, goom, goom2k1, hdv1394src, icydemux, id3demux, id3v2mux, imagefreeze, imagesequencesrc, interleave, ismlmux, jackaudiosink, jackaudiosrc, jifmux, jpegdec, jpegenc, jpegparse, lamemp3enc, level, matroskademux, matroskamux, matroskaparse, mj2mux, monoscope, mp4mux, mpegaudioparse, mpg123audiodec, mulawdec, mulawenc, multifilesink, multifilesrc, multipartdemux, multipartmux, multiudpsink, navigationtest, navseek, optv, oss4sink, oss4src, osssink, osssrc, pngdec, pngenc, progressreport, pulsesink, pulsesrc, pushfilesrc, qtdemux, qtmoovrecover, qtmux, quarktv, radioactv, revtv, rganalysis, rglimiter, rgvolume, rippletv, rndbuffersize, rtpL16depay, rtpL16pay, rtpL24depay, rtpL24pay, rtpL8depay, rtpL8pay, rtpac3depay, rtpac3pay, rtpamrdepay, rtpamrpay, rtpbin, rtpbvdepay, rtpbvpay, rtpceltdepay, rtpceltpay, rtpdec, rtpdtmfdepay, rtpdtmfmux, rtpdtmfsrc, rtpdvdepay, rtpdvpay, rtpfunnel, rtpg722depay, rtpg722pay, rtpg723depay, rtpg723pay, rtpg726depay, rtpg726pay, rtpg729depay, rtpg729pay, rtpgsmdepay, rtpgsmpay, rtpgstdepay, rtpgstpay, rtph261depay, rtph261pay, rtph263depay, rtph263pay, rtph263pdepay, rtph263ppay, rtph264depay, rtph264pay, rtph265depay, rtph265pay, rtphdrextclientaudiolevel, rtphdrextcolorspace, rtphdrexttwcc, rtpilbcdepay, rtpilbcpay, rtpisacdepay, rtpisacpay, rtpj2kdepay, rtpj2kpay, rtpjitterbuffer, rtpjpegdepay, rtpjpegpay, rtpklvdepay, rtpklvpay, rtpldacpay, rtpmp1sdepay, rtpmp2tdepay, rtpmp2tpay, rtpmp4adepay, rtpmp4apay, rtpmp4gdepay, rtpmp4gpay, rtpmp4vdepay, rtpmp4vpay, rtpmpadepay, rtpmpapay, rtpmparobustdepay, rtpmpvdepay, rtpmpvpay, rtpmux, rtpopusdepay, rtpopuspay, rtppcmadepay, rtppcmapay, rtppcmudepay, rtppcmupay, rtpptdemux, rtpqcelpdepay, rtpqdm2depay, rtpreddec, rtpredenc, rtprtxqueue, rtprtxreceive, rtprtxsend, rtpsbcdepay, rtpsbcpay, rtpsession, rtpsirendepay, rtpsirenpay, rtpspeexdepay, rtpspeexpay, rtpssrcdemux, rtpst2022-1-fecdec, rtpst2022-1-fecenc, rtpstorage, rtpstreamdepay, rtpstreampay, rtpsv3vdepay, rtptheoradepay, rtptheorapay, rtpulpfecdec, rtpulpfecenc, rtpvorbisdepay, rtpvorbispay, rtpvp8depay, rtpvp8pay, rtpvp9depay, rtpvp9pay, rtpvrawdepay, rtpvrawpay, rtpxqtdepay, rtspsrc, sbcparse, scaletempo, shagadelictv, shapewipe, shout2send, smpte, smptealpha, spectrum, speexdec, speexenc, splitfilesrc, splitmuxsink, splitmuxsrc, stereo, streaktv, taginject, testsink, twolamemp2enc, udpsink, udpsrc, v4l2radio, v4l2sink, v4l2src, vertigotv, videobalance, videobox, videocrop, videoflip, videomedian, videomixer, viewfinderbin, vp8dec, vp8enc, vp9dec, vp9enc, warptv, wavenc, wavpackdec, wavpackenc, wavpackparse, wavparse, webmmux, wrappercamerabinsrc, ximagesrc, y4menc
Gstreamer-Encoders: application/x-rtcp-stream; application/x-rtp; application/x-rtp-stream; application/x-srtcp-stream; application/x-srtp-stream; application/x-yuv4mpeg, y4mversion=(int)2; audio/mpeg, mpegversion=(int)1, layer=(int){ 3, 2 }; audio/webm; audio/x-alaw; audio/x-flac; audio/x-matroska; audio/x-mulaw; audio/x-rf64; audio/x-speex; audio/x-wav; audio/x-wavpack-correction, framed=(boolean)true; image/jpeg, sof-marker=(int){ 0, 1, 2, 4, 9 }; image/png; multipart/x-mixed-replace; video/mj2; video/quicktime; video/webm; video/x-flv; video/x-matroska; video/x-matroska-3d; video/x-msvideo; video/x-vp8, profile=(string){ 0, 1, 2, 3 }; video/x-vp9, profile=(string){ 0, 1, 2, 3 }
Gstreamer-Uri-Sinks: udp
Gstreamer-Uri-Sources: dv, hdv, imagesequence, multifile, pushfile, radio, rtsp, rtsp-sdp, rtsph, rtsps, rtspsh, rtspst, rtspsu, rtspt, rtspu, splitfile, splitmux, udp, v4l2
Gstreamer-Version: 1.20
Original-Maintainer: Maintainers of GStreamer packages <gst-plugins-good1.0@packages.debian.org>

Package: gstreamer1.0-x
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 323
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gst-plugins-base1.0
Version: 1.20.1-1ubuntu0.5
Provides: gstreamer1.0-videosink
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libglib2.0-0 (>= 2.56), libgstreamer-plugins-base1.0-0 (>= 1.20.0), libgstreamer1.0-0 (>= 1.20.0), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.22), libx11-6, libxext6, libxv1
Description: GStreamer plugins for X11 and Pango
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains the GStreamer plugins for X11 video output, both
 for standard Xlib support and for the Xv extension, as well as the
 plugin for Pango-based text rendering and overlay.
Homepage: https://gstreamer.freedesktop.org
Gstreamer-Elements: clockoverlay, textoverlay, textrender, timeoverlay, ximagesink, xvimagesink
Gstreamer-Version: 1.20
Original-Maintainer: Maintainers of GStreamer packages <gst-plugins-base1.0@packages.debian.org>

Package: gtk-update-icon-cache
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.24.33-1ubuntu2.2
Replaces: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2)
Depends: libc6 (>= 2.34), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0 (>= 2.57.2)
Breaks: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2)
Description: icon theme caching utility
 gtk-update-icon-cache creates mmap()able cache files for icon themes.
 .
 GTK can use the cache files created by gtk-update-icon-cache to avoid a lot
 of system call and disk seek overhead when the application starts. Since the
 format of the cache files allows them to be mmap()ed shared between multiple
 applications, the overall memory consumption is reduced as well.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 240
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.10-4ubuntu4.1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.34)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Homepage: https://www.gnu.org/software/gzip/
Original-Maintainer: Milan Kupcevic <milan@debian.org>

Package: hdparm
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 244
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 9.60+ds-1build3
Depends: libc6 (>= 2.34), lsb-base
Recommends: powermgmt-base
Conffiles:
 /etc/hdparm.conf fe09abd1838cf3e012353933c5aa0dda
Description: tune hard disk parameters for high performance
 Get/set device parameters for Linux SATA/IDE drives.
 Provides a command line interface to various kernel interfaces supported by
 the Linux SATA/PATA/SAS "libata" subsystem and the older IDE driver subsystem.
 Many newer (2008 and later) USB drive enclosures now also support "SAT"
 (SCSI-ATA Command Translation) and therefore may also work with hdparm.
Original-Maintainer: Alexandre Mestiashvili <mestia@debian.org>
Homepage: http://sourceforge.net/projects/hdparm/

Package: hicolor-icon-theme
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 440
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.17-2
Description: default fallback theme for FreeDesktop.org icon themes
 This is the default fallback theme used by implementations of the
 Freedesktop.org Icon Theme specification.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.23ubuntu2
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.34)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.
Original-Maintainer: Michael Meskes <meskes@debian.org>

Package: htop
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 334
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0.5-7build2
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libtinfo6 (>= 6)
Suggests: lm-sensors, lsof, strace
Description: interactive processes viewer
 Htop is an ncursed-based process viewer similar to top, but it
 allows one to scroll the list vertically and horizontally to see
 all processes and their full command lines.
 .
 Tasks related to processes (killing, renicing) can be done without
 entering their PIDs.
Original-Maintainer: Daniel Lange <DLange@debian.org>
Homepage: https://htop.dev/

Package: humanity-icon-theme
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 20660
Maintainer: Ubuntu MOTU Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: all
Version: 0.6.16
Depends: adwaita-icon-theme, hicolor-icon-theme
Description: Humanity Icon theme
 Humanity and Humanity Dark are nice and well polished icon themes for
 the GNOME desktop.

Package: hunspell-en-us
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 878
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: scowl (2020.12.07-2)
Version: 1:2020.12.07-2
Replaces: myspell-en-us, openoffice.org-spellcheck-en-us
Provides: hunspell-dictionary, hunspell-dictionary-en, hunspell-dictionary-en-us
Depends: dictionaries-common (>= 0.10)
Suggests: hunspell, openoffice.org-hunspell | openoffice.org-core (>= 2.0.2)
Conflicts: firefox (<< 2.0.0.3-2), iceape-browser (<< 1.1.1-2), icedove (<< 2.0.0.0-4), iceweasel (<< 2.0.0.3-2), libxul0d (= 1.8.0.11-3), mozilla-browser (<< 1.8+1.1.1-2), myspell-en-us, openoffice.org (<= 1.0.3-2), openoffice.org-core (<< 2.1~m190-1), thunderbird (<< 2.0.0.1+dfsg-0)
Description: English_american dictionary for hunspell
 This is the English_american dictionary for use with the hunspell spellchecker
 .
 Hunspell is a spell checker and morphological analyzer library and program
 designed for languages with rich morphology and complex word compounding or
 character encoding. It is based on MySpell and features an Ispell-like
 terminal interface using Curses library, an Ispell pipe interface and a
 LibreOffice UNO module.
Original-Maintainer: Don Armstrong <don@debian.org>
Homepage: http://wordlist.sourceforge.net/

Package: ibverbs-providers
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1170
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rdma-core
Version: 39.0-1
Replaces: libipathverbs1 (<< 15), libmlx4-1 (<< 15), libmlx5-1 (<< 15), libmthca1 (<< 15)
Provides: libefa1, libipathverbs1, libmlx4-1, libmlx5-1, libmthca1
Depends: libc6 (>= 2.34), libibverbs1 (>= 38)
Breaks: libipathverbs1 (<< 15), libmlx4-1 (<< 15), libmlx5-1 (<< 15), libmthca1 (<< 15)
Conffiles:
 /etc/libibverbs.d/bnxt_re.driver dfdc62acff60833950aa76845b3dd974
 /etc/libibverbs.d/cxgb4.driver 813a775ac8e335dc5b8a0f927f7df8ae
 /etc/libibverbs.d/efa.driver d00959c9098cf143ec040c39f2173f04
 /etc/libibverbs.d/hfi1verbs.driver 20cd8c1046d62aba32fa4c949a5db80b
 /etc/libibverbs.d/hns.driver c505e0f70fb172afd48acc33a733acde
 /etc/libibverbs.d/ipathverbs.driver f2710bebefa1cb4c40f96556f6919925
 /etc/libibverbs.d/irdma.driver 602e763262c98fcf96a5e4fd26f57a9e
 /etc/libibverbs.d/mlx4.driver 6bfeea2b2666f6ffd09ce5ffa6a94b12
 /etc/libibverbs.d/mlx5.driver 3fef613081d2d483e9680be82e18e0fe
 /etc/libibverbs.d/mthca.driver 176eb299dbf746486ea18c832b871094
 /etc/libibverbs.d/ocrdma.driver 28285b19f7b8044e6a5003477cc26ef5
 /etc/libibverbs.d/qedr.driver 181182a2b8a7dd604cdfbbcd1f873e13
 /etc/libibverbs.d/rxe.driver 98676a4e0bc992ee80998b8599039434
 /etc/libibverbs.d/siw.driver 4cad034f720e49b931e7e05da889c919
 /etc/libibverbs.d/vmw_pvrdma.driver 2ae063cb52092f09bbcccc7c6cafad69
Description: User space provider drivers for libibverbs
 libibverbs is a library that allows userspace processes to use RDMA
 "verbs" as described in the InfiniBand Architecture Specification and
 the RDMA Protocol Verbs Specification.  iWARP ethernet NICs support
 RDMA over hardware-offloaded TCP/IP, while InfiniBand is a
 high-throughput, low-latency networking technology.  InfiniBand host
 channel adapters (HCAs) and iWARP NICs commonly support direct
 hardware access from userspace (kernel bypass), and libibverbs
 supports this when available.
 .
 An RDMA driver consists of a kernel portion and a user space portion.
 This package contains the user space verbs drivers:
 .
  - bnxt_re: Broadcom NetXtreme-E RoCE HCAs
  - cxgb4: Chelsio T4 iWARP HCAs
  - efa: Amazon Elastic Fabric Adapter
  - hfi1verbs: Intel Omni-Path HFI
  - hns: HiSilicon Hip06 SoC
  - ipathverbs: QLogic InfiniPath HCAs
  - irdma: Intel Ethernet Connection RDMA
  - mlx4: Mellanox ConnectX-3 InfiniBand HCAs
  - mlx5: Mellanox Connect-IB/X-4+ InfiniBand HCAs
  - mthca: Mellanox InfiniBand HCAs
  - ocrdma: Emulex OneConnect RDMA/RoCE device
  - qedr: QLogic QL4xxx RoCE HCAs
  - rxe: A software implementation of the RoCE protocol
  - siw: A software implementation of the iWarp protocol
  - vmw_pvrdma: VMware paravirtual RDMA device
Original-Maintainer: Benjamin Drung <benjamin.drung@ionos.com>
Homepage: https://github.com/linux-rdma/rdma-core

Package: icu-devtools
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 678
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: icu
Version: 70.1-2
Replaces: icu-tools (<< 70.1~rc-1~), libicu-dev (<< 70.1-2)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libicu70 (>= 70.1-1~), libstdc++6 (>= 5.2)
Breaks: icu-tools (<< 70.1~rc-1~), libicu-dev (<< 70.1-2)
Description: Development utilities for International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support. This package contains programs used to
 manipulate data files found in the ICU sources and is a dependency of
 libicu-dev.  End users would generally not need to install this package.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://icu.unicode.org/

Package: idn2
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libidn2
Version: 2.3.2-2build1
Depends: libc6 (>= 2.34), libidn2-0 (>= 2.0.0), libunistring2 (>= 0.9.7)
Description: Internationalized domain names (IDNA2008/TR46) command line tool
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008/TR46.
 .
 This package contains the idn2 command-line tool.
Homepage: https://www.gnu.org/software/libidn/#libidn2
Original-Maintainer: Debian Libidn team <help-libidn@gnu.org>

Package: iftop
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 93
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0~pre4-7
Depends: libc6 (>= 2.29), libncurses6 (>= 6), libpcap0.8 (>= 0.9.8), libtinfo6 (>= 6)
Description: displays bandwidth usage information on an network interface
 iftop does for network usage what top(1) does for CPU usage. It listens to
 network traffic on a named interface and displays a table of current bandwidth
 usage by pairs of hosts. Handy for answering the question "Why is my Internet
 link so slow?".
Original-Maintainer: Markus Koschany <apo@debian.org>
Homepage: http://www.ex-parrot.com/~pdw/iftop/

Package: imagemagick
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 8:6.9.11.60+dfsg-1.3ubuntu0.22.04.5
Depends: imagemagick-6.q16 (>= 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- binaries
 ImageMagick is a software suite to create, edit, and compose bitmap images.
 It can read, convert and write images in a variety of formats (over 100)
 including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
 SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
 shear and transform images, adjust image colors, apply various special
 effects, or draw text, lines, polygons, ellipses and Bézier curves.
 All manipulations can be achieved through shell commands as well as through
 an X11 graphical interface (display).
 .
 This package include links to channel depth specific binaries and manual
 pages.
 .
 This is a dummy package.  You can safely purge or remove it.
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>

Package: imagemagick-6-common
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 481
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.3ubuntu0.22.04.5
Replaces: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16 (<< 8:6.9.6.2+dfsg-3~)
Provides: imagemagick-common
Breaks: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16-2 (<< 8:6.9.6.2+dfsg-3~), libmagickcore-6.q16-3 (<< 8:6.9.6.8+dfsg-1~), libmagickcore-6.q16-4 (<< 8:6.9.8.9+dfsg-1~), libmagickcore-6.q16hdri-4 (<< 8:6.9.8.9+dfsg-1~)
Conffiles:
 /etc/ImageMagick-6/coder.xml 2cd28d60bb45db29bba17f35dc58ccb9
 /etc/ImageMagick-6/colors.xml 7a58fb76b799bf829c55eecd08db28c2
 /etc/ImageMagick-6/delegates.xml 023a781ad0d2fb3e42b1c89fcfb2cb7f
 /etc/ImageMagick-6/log.xml 29c0a0702c3729fec215ce53438eb608
 /etc/ImageMagick-6/magic.xml 04b219d820811a6cb1bc7af03b52b626
 /etc/ImageMagick-6/mime.xml a0c1c972c13db8986951e0016f5be31b
 /etc/ImageMagick-6/policy.xml faed773d7bbcf639e2631a0f7cb5e6ce
 /etc/ImageMagick-6/quantization-table.xml 948aa1faac66b697266eaa55e8a052e5
 /etc/ImageMagick-6/thresholds.xml 99375e73d2a9a3acca91bf1011d15656
 /etc/ImageMagick-6/type-apple.xml 94aac3cbd6fdb6ccf338e8e60c3a6fcc
 /etc/ImageMagick-6/type-dejavu.xml 2914462b5aec3bf19f4f706c018e904f
 /etc/ImageMagick-6/type-ghostscript.xml 76f2f31af66d562422aa56095cf67284
 /etc/ImageMagick-6/type-urw-base35.xml 0cbc7447c3b14e3a26025cf0bec201f7
 /etc/ImageMagick-6/type-windows.xml 3a8000b7f83d4108e7c3024c1bcc403c
 /etc/ImageMagick-6/type.xml a355c73d6843b2bfb5b5d7bb9cf2a5de
Description: image manipulation programs -- infrastructure
 imagemagick-common contains the filesystem infrastructure required for
 further installation of imagemagick in any configuration; it does not provide
 a full installation of binaries, libraries, and utilities
 required to run imagemagick.
 .
 This package is independent of channel depth.
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>

Package: imagemagick-6.q16
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 556
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.3ubuntu0.22.04.5
Replaces: imagemagick (<< 8:6.9.2.10+dfsg-2~)
Provides: imagemagick, imagemagick-6.defaultquantum
Depends: libc6 (>= 2.34), libmagickcore-6.q16-6 (>= 8:6.9.10.2), libmagickwand-6.q16-6 (>= 8:6.9.10.2), hicolor-icon-theme
Recommends: libmagickcore-6.q16-6-extra, ghostscript, netpbm
Suggests: imagemagick-doc, autotrace, cups-bsd | lpr | lprng, curl, enscript, ffmpeg, gimp, gnuplot, grads, graphviz, groff-base, hp2xx, html2ps, libwmf-bin, mplayer, povray, radiance, sane-utils, texlive-base-bin, transfig, ufraw-batch, xdg-utils
Breaks: libmagickcore-dev (<< 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- quantum depth Q16
 ImageMagick is a software suite to create, edit, and compose bitmap images.
 It can read, convert and write images in a variety of formats (over 100)
 including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
 SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
 shear and transform images, adjust image colors, apply various special
 effects, or draw text, lines, polygons, ellipses and Bézier curves.
 All manipulations can be achieved through shell commands as well as through
 an X11 graphical interface (display).
 .
 For working with the SVG, WMF, OpenEXR, DjVu and Graphviz formats,
 you need to install the libmagickcore-6.q16-6-extra package.
 .
 This version of imagemagick is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>

Package: info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 849
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: texinfo
Version: 6.8-4build1
Replaces: texinfo (<< 4.7-2), texinfo-doc-nonfree
Provides: info-browser
Depends: libc6 (>= 2.34), libtinfo6 (>= 6), install-info
Breaks: texinfo-doc-nonfree
Description: Standalone GNU Info documentation browser
 The Info file format is an easily-parsable representation for online
 documents. This program allows you to view Info documents, like the
 ones stored in /usr/share/info.
 .
 Much of the software in Debian comes with its online documentation in
 the form of Info files, so it is most likely you will want to install it.
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Homepage: https://www.gnu.org/software/texinfo/

Package: init
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 22
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.62
Depends: init-system-helpers (>= 1.25)
Pre-Depends: systemd-sysv
Description: metapackage ensuring an init system is installed
 This package is a metapackage which allows you to select from the available
 init systems while ensuring that one of these is available on the system at
 all times.
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Important: yes

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 133
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.62
Depends: perl-base (>= 5.20.1-3)
Conflicts: file-rc (<< 0.8.17~)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.140ubuntu13.5
Provides: linux-initramfs-tool
Depends: initramfs-tools-core (= 0.140ubuntu13.5), linux-base
Suggests: bash-completion
Breaks: e2fsprogs (<< 1.42.13), initscripts (<< 2.88dsf-59.3~), netplan.io (<< 0.37), upstart
Conflicts: linux-initramfs-tool, usplash (<< 0.5.50)
Conffiles:
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/kernel/postinst.d/initramfs-tools c1cb0e052a2cdeef4f3257585c83c58d
 /etc/kernel/postrm.d/initramfs-tools e7471d253a5b24e2fd85b40be4e43218
Description: generic modular initramfs generator (automation)
 This package builds a bootable initramfs for Linux kernel packages.  The
 initramfs is loaded along with the kernel and is responsible for
 mounting the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: initramfs-tools-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: initramfs-tools
Version: 0.140ubuntu13.5
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libudev1 (>= 183)
Description: binaries used by initramfs-tools
 This package contains binaries used inside the initramfs images generated
 by initramfs-tools.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: initramfs-tools-core
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 275
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.140ubuntu13.5
Replaces: initramfs-tools (<< 0.121~)
Depends: busybox-initramfs (>= 1:1.30.1-4ubuntu5~), initramfs-tools-bin (= 0.140ubuntu13.5), klibc-utils (>= 2.0.4-8~), cpio (>= 2.12), zstd, kmod, udev, coreutils (>= 8.24), logsave | e2fsprogs (<< 1.45.3-1~)
Suggests: bash-completion
Breaks: busybox-initramfs (<< 1:1.30.1-4ubuntu5~), initramfs-tools (<< 0.121~)
Conffiles:
 /etc/initramfs-tools/initramfs.conf 928db4c3f5c9c61d79ce5ae9c2e1476a
Description: generic modular initramfs generator (core tools)
 This package contains the mkinitramfs program that can be used to
 create a bootable initramfs for a Linux kernel.  The initramfs should
 be loaded along with the kernel and is then responsible for mounting
 the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: inotify-tools
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 161
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.22.1.0-2
Depends: libc6 (>= 2.34), libinotifytools0 (>= 3.22.1.0)
Description: command-line programs providing a simple interface to inotify
 inotify (inode notify) is a Linux kernel subsystem that monitors events in
 filesystems and reports those events to applications in real time via API.
 .
 inotify can be used to monitor individual files or directories. When a
 directory is monitored, inotify will return events for the directory itself
 and for files inside the directory.
 .
 inotify-tools is a set of command-line programs for Linux providing a simple
 interface to inotify. These programs can be used to monitor and act upon
 filesystem events. inotify-tools consists of four utilities: inotifywait,
 inotifywatch, fsnotifywait and fsnotifywatch.
 .
 inotifywait efficiently waits for changes to files, making it appropriate
 for use in shell scripts.
 .
 inotifywatch collects filesystem usage statistics and outputs counts of each
 inotify event.
 .
 fsnotifywait and fsnotifywatch are similar to inotifywait and inotifywatch,
 but they are using Linux's fanotify(7) interface by default. The fanotify API
 also provides notification and interception of filesystem events. Additional
 capabilities compared to the inotify(7) API include the ability to monitor
 all of the objects in a mounted filesystem, the ability to make access
 permission decisions, and the possibility to read or modify files before
 access by other applications.
 .
 inotify-tools is also useful for security activities in firewall systems or
 to detect changes and injections of new files in webservers by intruders.
Original-Maintainer: Joao Eriberto Mota Filho <eriberto@debian.org>
Homepage: https://github.com/rvoicilas/inotify-tools/wiki/

Package: install-info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 257
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: texinfo
Version: 6.8-4build1
Replaces: texinfo (<< 4.13a.dfsg.1-2)
Depends: libc6 (>= 2.34)
Pre-Depends: dpkg (>= 1.16.1)
Breaks: texinfo (<< 4.13a.dfsg.1-2)
Description: Manage installed documentation in info format
 The install-info utility creates the index of all installed documentation
 in info format and makes it available to info readers.
Original-Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Homepage: https://www.gnu.org/software/texinfo/

Package: intel-microcode
Status: install ok installed
Priority: standard
Section: non-free/admin
Installed-Size: 19306
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.20250812.0ubuntu0.22.04.1
Depends: iucode-tool (>= 1.0)
Recommends: initramfs-tools (>= 0.113~)
Conflicts: microcode.ctl (<< 0.18~0)
Conffiles:
 /etc/default/intel-microcode 6a68a0e6e2d2ef001f1a374ece3c8558
 /etc/kernel/preinst.d/intel-microcode 4324b7d12701909b3a76bb5c6468a571
 /etc/modprobe.d/intel-microcode-blacklist.conf 71327241f6583b34944e638a955aba91
Description: Processor microcode firmware for Intel CPUs
 This package contains updated system processor microcode for
 Intel i686 and Intel X86-64 processors.  Intel releases microcode
 updates to correct processor behavior as documented in the
 respective processor specification updates.
 .
 For AMD processors, please refer to the amd64-microcode package.
Homepage: https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files
Original-Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>

Package: iotop
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.6-24-g733f3f8-1.1ubuntu0.1
Depends: python3:any
Description: simple top-like I/O monitor
 iotop does for I/O usage what top(1) does for CPU usage. It watches I/O
 usage information output by the Linux kernel and displays a table of
 current I/O usage by processes on the system. It is handy for answering
 the question "Why is the disk churning so much?".
 .
 iotop can only run under a Linux 2.6.20 or later kernel built with the
 CONFIG_TASKSTATS, CONFIG_TASK_DELAY_ACCT, CONFIG_TASK_IO_ACCOUNTING and
 CONFIG_VM_EVENT_COUNTERS build config options on.
Homepage: http://guichaz.free.fr/iotop/
Original-Maintainer: Paul Wise <pabs@debian.org>

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 2880
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.15.0-1ubuntu2
Replaces: iproute
Provides: arpd
Depends: debconf (>= 0.5) | debconf-2.0, libbpf0 (>= 1:0.2), libbsd0 (>= 0.0), libc6 (>= 2.34), libcap2 (>= 1:2.10), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 3.1~), libxtables12 (>= 1.6.0+snapshot20161117), libcap2-bin
Recommends: libatm1 (>= 2.4.1-17~)
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
 /etc/iproute2/ematch_map 0e0f36cafc6a9cf76bc704cfd8f96ece
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/nl_protos 393e42fa549d0974eb66d576675779c2
 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
 /etc/iproute2/rt_protos 35b7f1673d1d0486c4188fd06b46a410
 /etc/iproute2/rt_protos.d/README 88e45597012c565f9a10ffef1bc14312
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_tables.d/README 18bfdabbd4d5b14eae350720ea5ff431
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2
Original-Maintainer: Alexander Wirt <formorer@debian.org>

Package: iptables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2837
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.8.7-1ubuntu5.2
Replaces: iptables-nftables-compat (<< 1.6.2~)
Depends: libip4tc2 (= 1.8.7-1ubuntu5.2), libip6tc2 (= 1.8.7-1ubuntu5.2), libxtables12 (= 1.8.7-1ubuntu5.2), netbase (>= 6.0), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~), libnetfilter-conntrack3 (>= 1.0.6), libnfnetlink0, libnftnl11 (>= 1.1.5)
Suggests: firewalld, kmod, nftables
Breaks: iptables-nftables-compat (<< 1.6.2~)
Description: administration tools for packet filtering and NAT
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 iptables is the userspace command line program used to configure
 the Linux packet filtering and NAT ruleset. It is targeted towards systems
 and networks administrators.
 .
 This package contains several different utilities, the most important ones:
 .
 iptables-nft, iptables-nft-save, iptables-nft-restore (nft-based version)
 .
 iptables-legacy, iptables-legacy-save, iptables-legacy-restore (legacy version)
 .
 ip6tables-nft, ip6tables-nft-save, ip6tables-nft-restore (nft-based version)
 .
 ip6tables-legacy, ip6tables-legacy-save, ip6tables-legacy-restore (legacy version)
 .
 arptables-nft, arptables-nft-save, arptables-nft-restore (nft-based version)
 .
 ebtables-nft, ebtables-nft-save, ebtables-nft-restore (nft-based version)
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>

Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: iputils
Version: 3:20211215-1ubuntu0.1
Provides: ping
Depends: libcap2-bin, libc6 (>= 2.34), libcap2 (>= 1:2.10), libidn2-0 (>= 0.6)
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.
Homepage: https://github.com/iputils/iputils/
Original-Maintainer: Noah Meyerhans <noahm@debian.org>

Package: iputils-tracepath
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: iputils
Version: 3:20211215-1ubuntu0.1
Depends: libc6 (>= 2.34)
Suggests: traceroute
Description: Tools to trace the network path to a remote host
 The tracepath utility is similar to the traceroute utility, but also
 attempts to discover the MTU of the path. Supports IPv4 and IPv6.
Homepage: https://github.com/iputils/iputils/
Original-Maintainer: Noah Meyerhans <noahm@debian.org>

Package: irqbalance
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 149
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.8.0-1ubuntu0.2
Depends: libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libglib2.0-0 (>= 2.35.8), libncursesw6 (>= 6), libnuma1 (>= 2.0.11), libsystemd0, libtinfo6 (>= 6)
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/default/irqbalance 36e64b919c5778f81128d01a0cf29014
 /etc/init.d/irqbalance fcb4a4d3f2770082bcbf0f3dc899b70c
Description: Daemon to balance interrupts for SMP systems
 Daemon to balance interrupts across multiple CPUs, which can lead to better
 performance and IO balance on SMP systems. This package is especially useful
 on systems with multi-core processors, as interrupts will typically only be
 serviced by the first core.
 .
 Note: irqbalance is not useful if you don't have more than one CPU core.
Homepage: https://github.com/Irqbalance/irqbalance
Original-Maintainer: Paride Legovini <paride@debian.org>

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 673
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isc-dhcp
Version: 4.4.1-2.3ubuntu2.4
Provides: dhcp-client
Depends: libc6 (>= 2.34), libdns-export1110, libisc-export1105, debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conffiles:
 /etc/apparmor.d/sbin.dhclient a613b9bc67bb3c77dc2071cdf205c1b1
 /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
 /etc/dhcp/dhclient-enter-hooks.d/resolved-enter 4ecfd14e38e7362cd6aeb3e438c2ec43
 /etc/dhcp/dhclient-exit-hooks.d/resolved 12e194a7c3bdde03d4a444c05061b69e
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
 /etc/dhcp/dhclient.conf c3b6c3271031ab8e250a192f4eb18695
Description: DHCP client for automatically obtaining an IP address
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org
Original-Maintainer: Debian ISC DHCP Maintainers <isc-dhcp@packages.debian.org>

Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 165
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isc-dhcp
Version: 4.4.1-2.3ubuntu2.4
Depends: debianutils (>= 2.8.2)
Description: common manpages relevant to all of the isc-dhcp packages
 This package includes manpages that are relevant to the various ISC DHCP
 packages.
 .
 The dhcp-options manpage describes available options for dhcpd and dhclient.
 The dhcp-eval manpage describes evaluation of conditional expressions.
Homepage: http://www.isc.org
Original-Maintainer: Debian ISC DHCP Maintainers <isc-dhcp@packages.debian.org>

Package: iso-codes
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 19769
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.9.0-1
Suggests: isoquery
Description: ISO language, territory, currency, script codes and their translations
 This package provides the ISO 639, ISO 639-3, and ISO 639-5 language
 code lists, the ISO 4217 currency code list, the ISO 3166 territory
 code list, the ISO 3166-2 sub-territory list, and the ISO 15924
 script code list as JSON files.
 .
 More importantly, it also provides their translations to be used by
 other programs.
Original-Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Homepage: https://salsa.debian.org/iso-codes-team/iso-codes

Package: iucode-tool
Status: install ok installed
Priority: optional
Section: contrib/utils
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.3.1-1build1
Depends: libc6 (>= 2.34)
Recommends: intel-microcode (>= 1)
Description: Intel processor microcode tool
 iucode_tool is a program to manipulate Intel® X86 and X86-64 processor
 microcode collections, and to use the kernel facilities to upgrade the
 microcode on Intel system processors.
 .
 It can load microcode data files in text and binary format, sort, list and
 filter the microcodes contained in these files, write selected microcodes to a
 new file in binary format, or upload them to the kernel.
 .
 It operates on non-free microcode data downloaded directly from Intel or
 installed by the intel-microcode package.
Original-Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>
Homepage: https://gitlab.com/iucode-tool

Package: iw
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 298
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.16-1build1
Depends: libc6 (>= 2.34), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7)
Recommends: wireless-regdb
Description: tool for configuring Linux wireless devices
 This package contains the 'iw' command line tool which allows to configure and
 show information about wireless devices.
 .
 iw is based on the nl80211 kernel interface and supports the majority of
 fairly recent hardware. The old tool iwconfig, which uses Wireless Extensions
 interface, is deprecated and it is strongly recommended to switch to iw and
 nl80211.
Homepage: https://wireless.wiki.kernel.org/en/users/documentation/iw
Original-Maintainer: Paride Legovini <paride@debian.org>

Package: java-common
Status: install ok installed
Priority: optional
Section: java
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.72build2
Suggests: default-jre
Description: Base package for Java runtimes
 This package provides common tools for the Java runtimes, such as
 the update-java-alternatives mechanism used to switch between
 different versions of Java.
Homepage: https://wiki.debian.org/Java/
Original-Maintainer: Debian Java Maintainers <pkg-java-maintainers@lists.alioth.debian.org>

Package: javascript-common
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 11+nmu1
Suggests: apache2 (>= 2.4.6~) | lighttpd | httpd
Conffiles:
 /etc/apache2/conf-available/javascript-common.conf 133aafb01e900b05e75042fd47dec067
 /etc/lighttpd/conf-available/90-javascript-alias.conf 568434a47d89bb89ecf81c8f9c4e1669
Description: Base support for JavaScript library packages
 Web applications that use JavaScript need to distribute it through HTTP. Using
 a common path for every script avoids the need to enable this path in the HTTP
 server for every package.
 .
 This is a helper package that creates /usr/share/javascript and enables it in
 the Apache and Lighttpd webserver.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>

Package: jenkins
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 93294
Maintainer: Kohsuke Kawaguchi <kk@kohsuke.org>
Architecture: all
Version: 2.528.3
Depends: adduser, lsb-base (>= 3.2-14), net-tools, sysvinit-utils (>= 2.88dsf-50)
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/default/jenkins 998ef18a55cd1c6f06613e79627e4439
 /etc/init.d/jenkins 75ed2aecb766a30228594aee102f681c
 /etc/logrotate.d/jenkins b47162f0b175626cbf0835e713dd0b60
Description: Jenkins is the leading open source automation server supported by a large and growing community of developers, testers, designers and other people interested in continuous integration, continuous delivery and modern software delivery practices. Built on the Java Virtual Machine (JVM), it provides more than 2,000 plugins that extend Jenkins to automate with practically any technology software delivery teams use. In 2022, Jenkins reached 300,000 known installations making it the most widely deployed automation server.
 .
 For more information, see https://www.jenkins.io.
Homepage: https://www.jenkins.io/

Package: jq
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.6-2.1ubuntu3.1
Depends: libjq1 (= 1.6-2.1ubuntu3.1), libc6 (>= 2.34)
Description: lightweight and flexible command-line JSON processor
 jq is like sed for JSON data – you can use it to slice
 and filter and map and transform structured data with
 the same ease that sed, awk, grep and friends let you
 play with text.
 .
 It is written in portable C, and it has minimal runtime
 dependencies.
 .
 jq can mangle the data format that you have into the
 one that you want with very little effort, and the
 program to do so is often shorter and simpler than
 you’d expect.
Homepage: https://github.com/stedolan/jq
Original-Maintainer: ChangZhuo Chen (陳昌倬) <czchen@debian.org>

Package: kbd
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.3.0-3ubuntu4.22.04
Provides: console-utilities
Depends: libc6 (>= 2.34), console-setup | console-setup-mini
Conflicts: console-utilities
Description: Linux console font and keytable utilities
 This package allows you to set up the Linux console, change the font,
 resize text mode virtual consoles and remap the keyboard.
 .
 You will probably want to install a set of data files, such as the one
 in the “console-setup” package.
Homepage: http://www.kbd-project.org/
Original-Maintainer: Console utilities maintainers <pkg-kbd-devel@lists.alioth.debian.org>

Package: keyboard-configuration
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 842
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.205ubuntu3
Replaces: console-setup (<< 1.47), console-setup-mini (<< 1.47)
Depends: liblocale-gettext-perl
Pre-Depends: debconf (>= 1.5.34)
Breaks: console-setup (<< 1.71), console-setup-mini (<< 1.47)
Description: system-wide keyboard preferences
 This package maintains the keyboard preferences in
 /etc/default/keyboard.  Other packages can use the information
 provided by this package in order to configure the keyboard on the
 console or in X Window.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 547
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: klibc
Version: 2.0.10-4ubuntu0.1
Depends: libklibc (= 2.0.10-4ubuntu0.1)
Breaks: initramfs-tools (<< 0.123~)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Original-Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 251
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 29-1ubuntu1
Depends: libc6 (>= 2.34), liblzma5 (>= 5.1.1alpha+20120614), libssl3 (>= 3.0.0~~alpha1), libzstd1 (>= 1.4.0), libkmod2 (= 29-1ubuntu1), lsb-base
Conffiles:
 /etc/depmod.d/ubuntu.conf 7c8439ef36b12e5f226b5dbfa20b8c2d
 /etc/init.d/kmod 82698019c962069b438bd2a82d9fa1e7
 /etc/modprobe.d/blacklist-ath_pci.conf d1da9bb08c2b0f56f3be93fd0e37946b
 /etc/modprobe.d/blacklist-firewire.conf 9cc07a17e8e64f9cd35ff59c29debe69
 /etc/modprobe.d/blacklist-framebuffer.conf 097e2142ae3e4dd2911eda7844ce0c18
 /etc/modprobe.d/blacklist-rare-network.conf 8fb4b96124e461f53adceba9ca91f09a
 /etc/modprobe.d/blacklist.conf 75f90164fe53985db48e7aa168bd5e7c
 /etc/modprobe.d/iwlwifi.conf f27bc645e93e20c8e532325d190ac8ee
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: krb5-locales
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: krb5
Version: 1.19.2-2ubuntu0.7
Description: internationalization support for MIT Kerberos
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains internationalized messages for MIT Kerberos.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: krb5-multidev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 855
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Depends: libkrb5-3 (= 1.19.2-2ubuntu0.7), libk5crypto3 (= 1.19.2-2ubuntu0.7), libgssapi-krb5-2 (= 1.19.2-2ubuntu0.7), libgssrpc4 (= 1.19.2-2ubuntu0.7), libkadm5srv-mit12 (= 1.19.2-2ubuntu0.7), libkadm5clnt-mit12 (= 1.19.2-2ubuntu0.7), comerr-dev
Suggests: krb5-doc
Description: development files for MIT Kerberos without Heimdal conflict
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 Most users wishing to build applications against MIT Kerberos should
 install libkrb5-dev.  However, that package conflicts with heimdal-dev.
 This package installs libraries and headers in /usr/include/mit-krb5 and
 /usr/lib/mit-krb5 and can be installed along side heimdal-multidev, which
 provides the same facilities for Heimdal.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: language-pack-en
Status: install ok installed
Priority: optional
Section: translations
Installed-Size: 9
Maintainer: Language pack maintainers <language-packs@ubuntu.com>
Architecture: all
Version: 1:22.04+20240902
Replaces: language-pack-en (<< 1:22.04+20240902), language-pack-en-base, language-pack-gnome-en (<< 1:22.04+20240902), language-pack-gnome-en-base (<< 1:22.04+20240902), language-pack-kde-en (<< 1:22.04+20240902), language-pack-kde-en-base (<< 1:22.04+20240902)
Depends: language-pack-en-base (>= 1:22.04+20240902)
Pre-Depends: dpkg (>= 1.16.1)
Description: translation updates for language English
 Translation data updates for all supported packages for:
 English
 .
 language-pack-en-base provides the bulk of translation data
 and is updated only seldom. This package provides frequent translation
 updates.

Package: language-pack-en-base
Status: install ok installed
Priority: optional
Section: translations
Installed-Size: 3773
Maintainer: Language pack maintainers <language-packs@ubuntu.com>
Architecture: all
Version: 1:22.04+20240902
Replaces: language-pack-en (<< 1:22.04+20240902), language-pack-en-base (<< 1:22.04+20240902), language-pack-gnome-en (<< 1:22.04+20240902), language-pack-gnome-en-base (<< 1:22.04+20240902), language-pack-kde-en (<< 1:22.04+20240902), language-pack-kde-en-base (<< 1:22.04+20240902)
Depends: locales (>= 2.3.6), language-pack-en (>= 1:22.04+20240902)
Pre-Depends: dpkg (>= 1.16.1)
Conflicts: language-pack-en (<< 1:22.04+20240902)
Description: translations for language English
 Translation data for all supported packages for:
 English
 .
 This package provides the bulk of translation data and is updated
 only seldom. language-pack-en provides frequent
 translation updates, so you should install this as well.

Package: language-pack-gnome-en
Status: install ok installed
Priority: optional
Section: translations
Installed-Size: 9
Maintainer: Language pack maintainers <language-packs@ubuntu.com>
Architecture: all
Version: 1:22.04+20240902
Replaces: language-pack-en (<< 1:22.04+20240902), language-pack-en-base (<< 1:22.04+20240902), language-pack-gnome-en (<< 1:22.04+20240902), language-pack-gnome-en-base, language-pack-kde-en (<< 1:22.04+20240902), language-pack-kde-en-base (<< 1:22.04+20240902)
Depends: language-pack-gnome-en-base (>= 1:22.04+20240902), language-pack-en
Pre-Depends: dpkg (>= 1.16.1)
Description: GNOME translation updates for language English
 Translation data updates for all supported GNOME packages for:
 English
 .
 language-pack-gnome-en-base provides the bulk of translation data
 and is updated only seldom. This package provides frequent translation
 updates.

Package: language-pack-gnome-en-base
Status: install ok installed
Priority: optional
Section: translations
Installed-Size: 3491
Maintainer: Language pack maintainers <language-packs@ubuntu.com>
Architecture: all
Version: 1:22.04+20240902
Replaces: language-pack-en (<< 1:22.04+20240902), language-pack-en-base (<< 1:22.04+20240902), language-pack-gnome-en (<< 1:22.04+20240902), language-pack-gnome-en-base (<< 1:22.04+20240902), language-pack-kde-en (<< 1:22.04+20240902), language-pack-kde-en-base (<< 1:22.04+20240902)
Depends: locales (>= 2.3.6), language-pack-gnome-en (>= 1:22.04+20240902)
Pre-Depends: dpkg (>= 1.16.1)
Conflicts: language-pack-gnome-en (<< 1:22.04+20240902)
Description: GNOME translations for language English
 Translation data for all supported GNOME packages for:
 English
 .
 This package provides the bulk of translation data and is updated
 only seldom. language-pack-gnome-en provides frequent
 translation updates, so you should install this as well.

Package: language-selector-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1776
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: language-selector
Version: 0.219.1
Depends: python3:any, iso-codes, python3-apt (>= 0.7.12.0), python3-dbus, dbus, accountsservice (>= 0.6.29-1ubuntu6)
Pre-Depends: dpkg (>= 1.15.7.2)
Conffiles:
 /etc/dbus-1/system.d/com.ubuntu.LanguageSelector.conf 4ae68aecbcfad1f92f7fb0a3305edf44
 /etc/fonts/conf.avail/30-cjk-aliases.conf a8c1e3ddb3c01a1974cd6ba8510277ca
 /etc/fonts/conf.avail/56-language-selector-ar.conf 0b8aa447c54e475fb91e62c0ac9c6b43
 /etc/fonts/conf.avail/64-language-selector-prefer.conf cc31aa3df0ce53568b31ae984355971b
 /etc/fonts/conf.avail/69-language-selector-ja.conf 5e3ed378ccff2697a48b0521fdc8bd4d
 /etc/fonts/conf.avail/69-language-selector-zh-cn.conf 213c5fccbf5f3ee348f993f085c8d99e
 /etc/fonts/conf.avail/69-language-selector-zh-hk.conf 8c960c5bcfb26f6f058902bf0b07cf00
 /etc/fonts/conf.avail/69-language-selector-zh-mo.conf ae322c10c54d609bc37bed17c11cd32b
 /etc/fonts/conf.avail/69-language-selector-zh-sg.conf eb0cdda5f96e73c75446af7f8676d494
 /etc/fonts/conf.avail/69-language-selector-zh-tw.conf a981e8a61314aeb753c11d6c72d80cd9
 /etc/fonts/conf.avail/99-language-selector-zh.conf bcbe0b7ba747248475e9413184103a2c
 /etc/profile.d/cedilla-portuguese.sh eb7a23efe066237e69ad812ad771873c
Description: Language selector for Ubuntu
 This package let you change and install language packs
 in Ubuntu.
 .
 This package contains the common part of language-selector

Package: laptop-detect
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.16
Recommends: dmidecode
Description: system chassis type checker
 This package provides a simple shell script which attempts to determine
 whether it is being run on a laptop (or similar portable machine). It is
 mainly useful for installers.
Original-Maintainer: Simó Albert i Beltran <sim6@probeta.net>
Homepage: https://gitlab.com/debiants/laptop-detect

Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 321
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 590-1ubuntu0.22.04.3
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/
Original-Maintainer: Milan Kupcevic <milan@debian.org>

Package: libaa1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: aalib
Version: 1.4p5-50build1
Replaces: aalib1
Provides: aalib1
Depends: libc6 (>= 2.33), libgpm2 (>= 1.20.7), libncurses6 (>= 6), libslang2 (>= 2.2.4), libtinfo6 (>= 6), libx11-6
Description: ASCII art library
 AAlib is a portable ASCII art graphics library. Internally, it works like
 a graphics display, but the output is rendered into gorgeous platform
 independent ASCII graphics.
Original-Maintainer: Jonathan Carter <jcc@debian.org>
Homepage: http://aa-project.sourceforge.net/aalib/

Package: libabsl20210324
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1799
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: abseil
Version: 0~20210324.2-2ubuntu0.2
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: extensions to the C++ standard library
 Abseil is an open-source collection of C++ library code designed to augment the
 C++ standard library. The Abseil library code is collected from Google's C++
 codebase and has been extensively tested and used in production. In some cases,
 Abseil provides pieces missing from the C++ standard; in others, Abseil
 provides alternatives to the standard for special needs.
 .
 This package contains Abseil's shared libraries.
Homepage: https://abseil.io/
Original-Maintainer: Benjamin Barenblat <bbaren@debian.org>

Package: libaccountsservice0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: accountsservice
Version: 22.07.5-2ubuntu1.5
Depends: libc6 (>= 2.4), libcrypt1 (>= 1:4.1.0), libglib2.0-0 (>= 2.63.5), libsystemd0 (>= 209)
Breaks: accountsservice (<< 0.6.5)
Description: query and manipulate user account information - shared libraries
 The AccountService project provides a set of D-Bus
 interfaces for querying and manipulating user account
 information and an implementation of these interfaces,
 based on the useradd, usermod and userdel commands.
 .
 This package provides the shared libraries of the
 AccountService library.
Homepage: https://www.freedesktop.org/wiki/Software/AccountsService/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.3.1-1
Depends: libc6 (>= 2.33)
Description: access control list - shared library
 This package contains the shared library containing the POSIX 1003.1e
 draft standard 17 functions for manipulating access control lists.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://savannah.nongnu.org/projects/acl/

Package: libadns1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 143
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: adns
Version: 1.6.0-2
Depends: libc6 (>= 2.17)
Suggests: adns-tools
Description: Asynchronous-capable DNS client library
 adns is a resolver library for C (and C++) programs.  In contrast
 with the existing interfaces, gethostbyname et al and libresolv, it
 can be used in an asynchronous, non-blocking manner, and has a
 convenient interface which doesn't require the application to handle
 any DNS data formats.  Many queries can be handled simultaneously.
 .
 This package contains the runtime library.
Original-Maintainer: Ian Jackson <ijackson@chiark.greenend.org.uk>
Homepage: http://www.chiark.greenend.org.uk/~ian/adns/

Package: libaio1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libaio
Version: 0.3.112-13build1
Depends: libc6 (>= 2.4)
Description: Linux kernel AIO access library - shared library
 This library enables userspace to use Linux kernel asynchronous I/O
 system calls, important for the performance of databases and other
 advanced applications.
 .
 This package contains the shared library.
Homepage: https://pagure.io/libaio
Original-Maintainer: Guillem Jover <guillem@debian.org>

Package: libalgorithm-diff-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.201-1
Depends: perl:any
Recommends: libalgorithm-diff-xs-perl
Description: module to find differences between files
 Algorithm::Diff is a Perl module that allows users to analyze text based on a
 Longest Common Subsequence (LCS) algorithm. It can compare two files and find
 the differences between them, which can produce the same information as the
 common Unix tool 'diff'.
 .
 There is an XS-optimized implementation of the core loop, which accelerates
 some types of diff output (see libalgorithm-diff-xs-perl).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Algorithm-Diff

Package: libalgorithm-diff-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.04-6build3
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34), libalgorithm-diff-perl
Description: module to find differences between files (XS accelerated)
 Algorithm::Diff::XS is a Perl diff utility module based on Joe Schaefer's
 excellent but not very well-known Algorithm::LCS module, with a drop-in
 interface identical to Algorithm::Diff.
 .
 Note that only the LCSidx function is optimized in XS at the moment, which
 means only compact_diff will get significantly faster for large data sets,
 while diff and sdiff will run in identical speed as Algorithm::Diff.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Algorithm-Diff-XS

Package: libalgorithm-merge-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.08-3
Depends: perl, libalgorithm-diff-perl
Description: Perl module for three-way merge of textual data
 Algorithm::Merge provides three-way merge and diff functions, complementing
 the functionality offered by Algorithm::Diff (libalgorithm-diff-perl). Given
 three sets of items, known as the original, left and right, this module can
 take a three-way difference or merge them. Taking a difference provides an
 array reference that is very similar to the behaviour of Algorithm::Diff. One
 can also implement custom conflict resolution using the CONFLICT callback.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Algorithm-Merge

Package: libaom3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5292
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: aom
Version: 3.3.0-1ubuntu0.1
Depends: libc6 (>= 2.34)
Description: AV1 Video Codec Library
 AOMedia Video 1 (AV1) is an open and royalty free video encoding format
 optimized for the Internet and the successor of VP9. aom is the
 reference encoder and decoder implementation published by the Alliance
 for Open Media.
 .
 This package contains the shared library.
Homepage: https://aomedia.org/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libapache2-mod-evasive
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libapache-mod-evasive
Version: 1.10.1-4
Depends: libc6 (>= 2.4), apache2-api-20120211, apache2-bin (>= 2.4.16), bsd-mailx | mailx
Conffiles:
 /etc/apache2/mods-available/evasive.conf 96d5be55e59ecf282f7be234cb1e57f6
 /etc/apache2/mods-available/evasive.load b7341e6477ed43e4dc9d2c24d8f43fa4
Description: evasive module to minimize HTTP DoS or brute force attacks
 mod_evasive is an evasive maneuvers module for Apache to provide some
 protection in the event of an HTTP DoS or DDoS attack or brute force attack.
 .
 It is also designed to be a detection tool, and can be easily configured to
 talk to ipchains, firewalls, routers, and etcetera.
 .
 This module only works on Apache 2.x servers
Original-Maintainer: Alberto Gonzalez Iniesta <agi@inittab.org>
Homepage: https://github.com/jzdziarski/mod_evasive

Package: libapache2-mod-php
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 40
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (100~+ubuntu22.04.1+deb.sury.org+1)
Version: 2:8.4+100~+ubuntu22.04.1+deb.sury.org+1
Depends: libapache2-mod-php8.4
Description: server-side, HTML-embedded scripting language (Apache 2 module) (default)
 This package provides the PHP module for the Apache 2 webserver.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on latest stable
 PHP version (currently 8.4).

Package: libapache2-mod-php8.2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5438
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: libapache2-mod-php, php-json, php8.2-json, phpapi-20220829
Depends: media-types | mime-support, php8.2-cli, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), php8.2-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
 /etc/apache2/mods-available/php8.2.conf 002a0a2a5863242ae11e2d2d4dfcafe4
 /etc/apache2/mods-available/php8.2.load c68f6273d32f252336bd75585aec958e
Description: server-side, HTML-embedded scripting language (Apache 2 module)
 This package provides the PHP module for the Apache 2 webserver (as
 found in the apache2-mpm-prefork package).  Please note that this package
 ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: libapache2-mod-php8.3
Status: deinstall ok config-files
Priority: optional
Section: httpd
Installed-Size: 5528
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.3
Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Config-Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Provides: libapache2-mod-php, php-json, php8.3-json, phpapi-20230831
Depends: media-types | mime-support, php8.3-cli, php8.3-common (= 8.3.22-1+ubuntu22.04.1+deb.sury.org+1), php8.3-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
 /etc/apache2/mods-available/php8.3.conf 002a0a2a5863242ae11e2d2d4dfcafe4
 /etc/apache2/mods-available/php8.3.load 675353173fb98595cc8499d45385a31e
Description: server-side, HTML-embedded scripting language (Apache 2 module)
 This package provides the PHP module for the Apache 2 webserver (as
 found in the apache2-mpm-prefork package).  Please note that this package
 ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: libapache2-mod-php8.4
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5749
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: libapache2-mod-php, php-json, php8.4-json, phpapi-20240924
Depends: media-types | mime-support, php8.4-cli, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), php8.4-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.9.4), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
 /etc/apache2/mods-available/php8.4.conf 002a0a2a5863242ae11e2d2d4dfcafe4
 /etc/apache2/mods-available/php8.4.load d937f2aece88b695ccacb4e4a086e2bc
Description: server-side, HTML-embedded scripting language (Apache 2 module)
 This package provides the PHP module for the Apache 2 webserver (as
 found in the apache2-mpm-prefork package).  Please note that this package
 ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: libapache2-mod-security2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 1089
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: modsecurity-apache
Version: 2.9.5-1
Depends: libxml2 (>= 2.9.0), libapr1 (>= 1.2.7), libaprutil1 (>= 1.4.0), libc6 (>= 2.34), libcurl3-gnutls (>= 7.16.2), liblua5.1-0, libpcre3, libyajl2 (>= 2.0.4), apache2-api-20120211, apache2-bin (>= 2.4.16)
Recommends: modsecurity-crs
Conffiles:
 /etc/apache2/mods-available/security2.conf 3d855bbcff83483349f0e49063e2e34c
 /etc/apache2/mods-available/security2.load 8c18b901d8cef4c2b8a9834aba5ba224
 /etc/modsecurity/modsecurity.conf-recommended 4716e776ee5646c8ce7d2521a962b1e2
 /etc/modsecurity/unicode.mapping 5c1fb5a8d70c19866dcc4d2084ecc952
Description: Tighten web applications security for Apache
 Modsecurity is an Apache module whose purpose is to tighten the Web
 application security. Effectively, it is an intrusion detection and prevention
 system for the web server.
 .
 At the moment its main features are:
   * Audit log; store full request details in a separate file, including POST
     payloads.
   * Request filtering; incoming requests can be analysed and offensive requests
     can be rejected (or simply logged, if that is what you want). This feature
     can be used to prevent many types of attacks (e.g. XSS attacks, SQL
     injection, ...) and even allow you to run insecure applications on your
     servers (if you have no other choice, of course).
Original-Maintainer: Alberto Gonzalez Iniesta <agi@inittab.org>
Homepage: https://github.com/SpiderLapbs/ModSecurity

Package: libapparmor1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 171
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 3.0.4-2ubuntu2.5
Replaces: libapparmor-perl (<< 3.0.3-3)
Depends: libc6 (>= 2.34)
Breaks: libapparmor-perl (<< 3.0.3-3)
Description: changehat AppArmor library
 libapparmor1 provides a shared library one can compile programs
 against in order to use various AppArmor functionality,
 such as transitioning to a different AppArmor profile or hat.
Homepage: https://apparmor.net/
Original-Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>

Package: libappstream4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 576
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: appstream
Version: 0.15.2-2
Depends: libc6 (>= 2.33), libcurl3-gnutls (>= 7.63.0), libglib2.0-0 (>= 2.67.3+git20210214), libstemmer0d (>= 0+svn527), libxml2 (>= 2.9.0), libxmlb2 (>= 0.3.4), libyaml-0-2
Description: Library to access AppStream services
 AppStream is a metadata specification which permits software components to
 provide information about themselves to automated systems and end-users
 before the software is actually installed.
 This permits informative displays of new applications to users in software
 centers, as well as allowing a system to make decisions on which new software
 a user might want to install (e.g. missing firmware or media handlers).
 .
 This package contains a GObject-based library to access AppStream
 services, like the software component metadata pool.
 It also contains functions for reading, writing and transforming AppStream
 metadata.
Original-Maintainer: Matthias Klumpp <mak@debian.org>
Homepage: https://www.freedesktop.org/wiki/Distributions/AppStream/

Package: libapr1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 290
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr
Version: 1.7.0-8ubuntu0.22.04.2
Depends: libc6 (>= 2.34), libuuid1 (>= 2.16)
Conflicts: libapr1.0
Description: Apache Portable Runtime Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
Homepage: https://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: libaprutil1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 283
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.1-5ubuntu4.22.04.2
Depends: libapr1 (>= 1.6.2), libc6 (>= 2.25), libcrypt1 (>= 1:4.1.0), libdb5.3, libexpat1 (>= 2.0.1), libgdbm6 (>= 1.16), libssl3 (>= 3.0.0~~alpha1)
Breaks: libapr1 (<< 1.4.8-2~)
Description: Apache Portable Runtime Utility Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
Homepage: http://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: libaprutil1-dbd-sqlite3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.1-5ubuntu4.22.04.2
Depends: libaprutil1 (= 1.6.1-5ubuntu4.22.04.2), libc6 (>= 2.4), libsqlite3-0 (>= 3.5.9)
Description: Apache Portable Runtime Utility Library - SQLite3 Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the SQLite3 database driver.
Homepage: http://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: libaprutil1-ldap
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.1-5ubuntu4.22.04.2
Depends: libaprutil1 (= 1.6.1-5ubuntu4.22.04.2), libc6 (>= 2.4), libldap-2.5-0 (>= 2.5.4)
Description: Apache Portable Runtime Utility Library - LDAP Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the LDAP driver.
Homepage: http://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: libapt-pkg6.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 2.4.14
Provides: libapt-pkg (= 2.4.14)
Depends: libbz2-1.0, libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libgcrypt20 (>= 1.9.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 11), libsystemd0 (>= 221), libudev1 (>= 183), libxxhash0 (>= 0.7.1), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 2.4.14)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), dpkg (<< 1.20.8), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http(s), rsh as well as an interface to add more transports like
    tor+http(s) (apt-transport-tor).
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: libargon2-1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: argon2
Version: 0~20171227-0.3
Depends: libc6 (>= 2.34)
Description: memory-hard hashing function - runtime library
 Argon2 is a password-hashing function that can be used to hash passwords
 for credential storage, key derivation, or other applications.
 .
 There are two main versions of Argon2: Argon2i and Argon2d.
 Argon2i is the safest against side-channel attacks, while Argon2d provides
 the highest resistance against GPU cracking attacks.
 .
 Argon2i and Argon2d are parametrized by:
  * A time cost, which defines the amount of computation realized and
    therefore the execution time, given in number of iterations
  * A memory cost, which defines the memory usage, given in kibibytes
  * A parallelism degree, which defines the number of parallel threads
 .
 This package includes the dynamic library against which programs are linked.
Original-Maintainer: Luca Bruno <lucab@debian.org>
Homepage: https://github.com/P-H-C/phc-winner-argon2

Package: libasan6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7518
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04.2
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04.2), libc6 (>= 2.34), libgcc-s1
Description: AddressSanitizer -- a fast memory error detector
 AddressSanitizer (ASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libasound2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: alsa-lib
Version: 1.2.6.1-1ubuntu1
Depends: libasound2-data (>= 1.2.6.1-1ubuntu1), libc6 (>= 2.34)
Suggests: libasound2-plugins (>= 1.0.24)
Breaks: alsa-utils (<< 1.2.1)
Description: shared library for ALSA applications
 This package contains the ALSA library and its standard plugins, as well
 as the required configuration files.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/
Original-Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>

Package: libasound2-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 217
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: alsa-lib
Version: 1.2.6.1-1ubuntu1
Replaces: libasound2 (<< 1.2.6.1-1ubuntu1)
Recommends: alsa-ucm-conf, alsa-topology-conf
Suggests: alsa-utils
Breaks: libasound2 (<< 1.2.6.1-1ubuntu1)
Description: Configuration files and profiles for ALSA drivers
 This package contains configuration files for ALSA drivers.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/
Original-Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>

Package: libaspell15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: aspell
Version: 0.60.8-4build1
Depends: libc6 (>= 2.34), libstdc++6 (>= 11)
Recommends: aspell-en | aspell-dictionary | aspell6a-dictionary
Suggests: aspell
Breaks: aspell-bin (<< 0.60.3-2)
Conflicts: aspell6-dictionary
Description: GNU Aspell spell-checker runtime library
 These are the runtime parts of the Aspell and pspell spell-checking
 toolkits, needed by applications that use the toolkits at runtime.
 .
 For a standalone spell-checker, install aspell as well.
Original-Maintainer: Agustin Martin Domingo <agmartin@debian.org>
Homepage: http://aspell.net/

Package: libassuan-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 260
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libassuan
Version: 2.5.5-1build1
Depends: dpkg (>= 1.15.4) | install-info, libassuan0 (= 2.5.5-1build1), libgpg-error-dev (>= 1.33)
Description: IPC library for the GnuPG components -- header files
 Libassuan is a small library implementing the so-called "Assuan
 protocol". This protocol is used for IPC between most newer GnuPG
 components. Both server and client side functions are provided.
 .
 This package contains header files and static libraries for libassuan.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: libassuan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libassuan
Version: 2.5.5-1build1
Depends: libc6 (>= 2.33), libgpg-error0 (>= 1.33)
Description: IPC library for the GnuPG components
 Libassuan is a small library implementing the so-called "Assuan
 protocol". This protocol is used for IPC between most newer GnuPG
 components. Both server and client side functions are provided.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: libasyncns0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libasyncns
Version: 0.8-6build2
Depends: libc6 (>= 2.34)
Description: Asynchronous name service query library
 libasyncns is a C library for Linux/Unix for executing name service queries
 asynchronously. It is an asynchronous wrapper around getaddrinfo(3),
 getnameinfo(3), res_query(3) and res_search(3) from libc and libresolv.
Homepage: http://0pointer.de/lennart/projects/libasyncns/
Original-Maintainer: Tanguy Ortolo <tanguy+debian@ortolo.eu>

Package: libatk-bridge2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 250
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-atk
Version: 2.38.0-3
Depends: libatk1.0-0 (>= 2.36.0~), libatspi2.0-0 (>= 2.9.90), libc6 (>= 2.7), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.41.1)
Description: AT-SPI 2 toolkit bridge - shared library
 This package contains the ATK bridge shared library.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility

Package: libatk-wrapper-java
Status: install ok installed
Priority: optional
Section: java
Installed-Size: 70
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: java-atk-wrapper
Version: 0.38.0-5build1
Depends: x11-utils
Recommends: libatk-wrapper-java-jni
Description: ATK implementation for Java using JNI
 Java ATK Wrapper is an implementation of ATK which uses JNI. It
 converts Java Swing events into ATK events, and sends these events to
 ATK-Bridge.
Homepage: https://ftp.gnome.org/pub/GNOME/sources/java-atk-wrapper/
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>

Package: libatk-wrapper-java-jni
Status: install ok installed
Priority: optional
Section: java
Installed-Size: 178
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: java-atk-wrapper
Version: 0.38.0-5build1
Depends: libatk-bridge2.0-0 (>= 2.18.1-2~), libatk1.0-0 (>= 2.14.0~), libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), libatk-wrapper-java (>= 0.38.0-5build1)
Description: ATK implementation for Java using JNI (JNI bindings)
 Java ATK Wrapper is an implementation of ATK which uses JNI. It
 converts Java Swing events into ATK events, and sends these events to
 ATK-Bridge.
 .
 This package contains the JNI bindings.
Homepage: https://ftp.gnome.org/pub/GNOME/sources/java-atk-wrapper/
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>

Package: libatk1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 199
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: atk1.0
Version: 2.36.0-3build1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.55.2), libatk1.0-data (>= 2.36.0-3build1)
Description: ATK accessibility toolkit
 ATK is a toolkit providing accessibility interfaces for applications or
 other toolkits. By implementing these interfaces, those other toolkits or
 applications can be used with tools such as screen readers, magnifiers, and
 other alternative input devices.
 .
 This is the runtime part of ATK, needed to run applications built with it.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility

Package: libatk1.0-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: atk1.0
Version: 2.36.0-3build1
Description: Common files for the ATK accessibility toolkit
 ATK is a toolkit providing accessibility interfaces for applications or
 other toolkits. By implementing these interfaces, those other toolkits or
 applications can be used with tools such as screen readers, magnifiers, and
 other alternative input devices.
 .
 This contains the common files which the runtime libraries need.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility

Package: libatm1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: linux-atm
Version: 1:2.5.1-4build2
Depends: libc6 (>= 2.34)
Description: shared library for ATM (Asynchronous Transfer Mode)
 Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
Homepage: http://linux-atm.sourceforge.net/
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: libatomic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.14)
Description: support library providing __atomic built-in functions
 library providing __atomic built-in functions. When an atomic call cannot
 be turned into lock-free instructions, GCC will make calls into this library.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libatspi2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 255
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.44.0-3
Depends: libc6 (>= 2.7), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.62), libx11-6 (>= 2:1.2.99.901), libxi6 (>= 2:1.2.99.4)
Recommends: at-spi2-core (= 2.44.0-3)
Description: Assistive Technology Service Provider Interface - shared library
 This package contains the shared library for applications that wish to use
 the at-spi interface.
Original-Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Homepage: https://wiki.gnome.org/Accessibility

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.5.1-1build1
Depends: libc6 (>= 2.4)
Conffiles:
 /etc/xattr.conf 743ca3f83ea263f1f56ad1f63f907bdb
Description: extended attribute handling - shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://savannah.nongnu.org/projects/attr/

Package: libattr1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.5.1-1build1
Replaces: attr-dev
Provides: attr-dev
Depends: libc6-dev | libc-dev, libattr1 (= 1:2.5.1-1build1)
Conflicts: attr-dev
Description: extended attributes handling - static libraries and headers
 This package contains the libraries and header files needed to develop
 programs which make use of extended attributes.  For Linux programs,
 the documented system call API is the recommended interface, but an
 SGI IRIX compatibility interface is also provided.
 .
 Currently most filesystems support extended attributes.
 The SGI IRIX compatibility API built above the Linux system calls is
 used by programs such as xfsdump(8), xfsrestore(8) and xfs_fsr(8).
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://savannah.nongnu.org/projects/attr/

Package: libaudit-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 23
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:3.0.7-1build1
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libaudit1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:3.0.7-1build1
Depends: libaudit-common (>= 1:3.0.7-1build1), libc6 (>= 2.33), libcap-ng0 (>= 0.7.9)
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libaugeas0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 477
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: augeas
Version: 1.13.0-1
Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~), libxml2 (>= 2.7.4), augeas-lenses
Suggests: augeas-tools
Description: Augeas configuration editing library and API
 Augeas is a configuration editing tool. It parses configuration files in their
 native formats and transforms them into a tree. Configuration changes are made
 by manipulating this tree and saving it back into native config files.
 .
 The transformation works very hard to preserve comments and formatting
 details. It is controlled by ``lens'' definitions that describe the file
 format and the transformation into a tree.
Original-Maintainer: Hilko Bengen <bengen@debian.org>
Homepage: http://augeas.net/

Package: libauparse0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 165
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:3.0.7-1build1
Depends: libaudit1 (= 1:3.0.7-1build1), libc6 (>= 2.17)
Description: Dynamic library for parsing security auditing
 The libauparse package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libauparse0 library.
Original-Maintainer: Laurent Bigonville <bigon@debian.org>
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libavahi-client3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 138
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-5ubuntu5.3
Depends: libavahi-common3 (= 0.8-5ubuntu5.3), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14)
Description: Avahi client library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the library for Avahi's C API which  allows you
 to integrate mDNS/DNS-SD functionality into your application.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libavahi-common-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-5ubuntu5.3
Description: Avahi common data files
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains common data files for avahi.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libavahi-common3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-5ubuntu5.3
Depends: libc6 (>= 2.34), libavahi-common-data (= 0.8-5ubuntu5.3)
Description: Avahi common library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the Avahi common library, which is a set of common
 functions used by many of Avahis components and client applications.
Homepage: http://avahi.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libavc1394-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libavc1394
Version: 0.5.4-5build2
Depends: libc6 (>= 2.29), libraw1394-11 (>= 2.1.2)
Description: control IEEE 1394 audio/video devices
 libavc1394 is a programming interface for the 1394 Trade Association AV/C
 (Audio/Video Control) Digital Interface Command Set. It allows you to
 remote control camcorders and similar devices connected to your computer
 via an IEEE 1394 (aka Firewire) link.
 .
 This package includes the libraries needed to run executables using
 libavc1394.
Homepage: http://sourceforge.net/projects/libavc1394/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libavif13
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libavif
Version: 0.9.3-3
Depends: libaom3 (>= 3.2.0), libc6 (>= 2.14), libdav1d5 (>= 0.1.0), libgav1-0 (>= 0.16.0), libyuv0 (>= 0.0~git20220104.b91df1a)
Description: Library for handling .avif files
 This library aims to be a friendly, portable C implementation of the AV1
 Image File Format as described in https://aomediacodec.github.io/av1-avif/.
 .
 This package provides the shared library files.
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Homepage: https://github.com/AOMediaCodec/libavif

Package: libbinutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2784
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.38-4ubuntu2.12
Replaces: binutils (<< 2.29-6)
Depends: libc6 (>= 2.34), zlib1g (>= 1:1.2.0), binutils-common (= 2.38-4ubuntu2.12)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities (private shared library)
 This package includes the private shared libraries libbfd and libopcodes.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 323
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Depends: libc6 (>= 2.33)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: libboost-all-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-dev, libboost-tools-dev, libboost-atomic-dev, libboost-chrono-dev, libboost-container-dev, libboost-context-dev, libboost-coroutine-dev, libboost-date-time-dev, libboost-exception-dev, libboost-fiber-dev, libboost-filesystem-dev, libboost-graph-dev, libboost-graph-parallel-dev, libboost-iostreams-dev, libboost-locale-dev, libboost-log-dev, libboost-math-dev, libboost-mpi-dev, libboost-mpi-python-dev, libboost-numpy-dev, libboost-program-options-dev, libboost-python-dev, libboost-random-dev, libboost-regex-dev, libboost-serialization-dev, libboost-stacktrace-dev, libboost-system-dev, libboost-test-dev, libboost-thread-dev, libboost-timer-dev, libboost-type-erasure-dev, libboost-wave-dev, libboost-nowide-dev
Description: Boost C++ Libraries development files (ALL) (default version)
 The Boost web site provides free, peer-reviewed, portable C++ source
 libraries. The emphasis is on libraries which work well with the C++
 Standard Library. One goal is to establish "existing practice" and
 provide reference implementations so that the Boost libraries are
 suitable for eventual standardization. Some of the libraries have
 already been proposed for inclusion in the C++ Standards Committee's
 upcoming C++ Standard Library Technical Report.
 .
 This metapackage provides the complete Boost development environment,
 including all separately-packaged libraries.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: https://www.boost.org/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-atomic-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-atomic1.74-dev
Description: atomic data types, operations, and memory ordering constraints (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Atomic is a library that provides atomic data types and
 operations on these data types, as well as memory ordering
 constraints required for coordinating multiple threads through atomic
 variables. It implements the interface as defined by the C++11
 standard, but makes this feature available for platforms lacking
 system/compiler support for this particular C++11 feature.
 .
 Users of this library should already be familiar with concurrency in
 general, as well as elementary concepts such as "mutual exclusion".
 .
 The implementation makes use of processor-specific instructions where
 possible (via inline assembler, platform libraries or compiler
 intrinsics), and falls back to "emulating" atomic operations through
 locking.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/atomic/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-atomic1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2064
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-atomic1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-atomic1.53-dev, libboost-atomic1.54-dev, libboost-atomic1.55-dev, libboost-atomic1.57-dev, libboost-atomic1.58-dev, libboost-atomic1.60-dev, libboost-atomic1.61-dev, libboost-atomic1.62-dev, libboost-atomic1.63-dev, libboost-atomic1.65-dev, libboost-atomic1.67-dev, libboost-atomic1.70-dev, libboost-atomic1.71-dev
Description: atomic data types, operations, and memory ordering constraints
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Atomic is a library that provides atomic data types and
 operations on these data types, as well as memory ordering
 constraints required for coordinating multiple threads through atomic
 variables. It implements the interface as defined by the C++11
 standard, but makes this feature available for platforms lacking
 system/compiler support for this particular C++11 feature.
 .
 Users of this library should already be familiar with concurrency in
 general, as well as elementary concepts such as "mutual exclusion".
 .
 The implementation makes use of processor-specific instructions where
 possible (via inline assembler, platform libraries or compiler
 intrinsics), and falls back to "emulating" atomic operations through
 locking.
Homepage: http://www.boost.org/libs/atomic/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-atomic1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2061
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.14), libstdc++6 (>= 5)
Description: atomic data types, operations, and memory ordering constraints
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Atomic is a library that provides atomic data types and
 operations on these data types, as well as memory ordering
 constraints required for coordinating multiple threads through atomic
 variables. It implements the interface as defined by the C++11
 standard, but makes this feature available for platforms lacking
 system/compiler support for this particular C++11 feature.
 .
 Users of this library should already be familiar with concurrency in
 general, as well as elementary concepts such as "mutual exclusion".
 .
 The implementation makes use of processor-specific instructions where
 possible (via inline assembler, platform libraries or compiler
 intrinsics), and falls back to "emulating" atomic operations through
 locking.
Homepage: http://www.boost.org/libs/atomic/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-chrono-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-chrono1.74-dev
Description: C++ representation of time duration, time point, and clocks (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost.Chrono library provides:
 .
  * A means to represent time durations: managed by the generic
 duration class . Examples of time durations include days, minutes,
 seconds and nanoseconds, which can be represented with a fixed number
 of clock ticks per unit. All of these units of time duration are
 united with a generic interface by the duration facility.
  * A type for representing points in time: time_point. A time_point
 represents an epoch plus or minus a duration. The library leaves
 epochs unspecified. A time_point is associated with a clock.
  * Several clocks, some of which may not be available on a
 particular platform: system_clock, steady_clock and
 high_resolution_clock. A clock is a pairing of a time_point and
 duration, and a function which returns a time_point representing now.
 .
 To make the timing facilities more generally useful, Boost.Chrono
 provides a number of clocks that are thin wrappers around the
 operating system's time APIs, thereby allowing the extraction of wall
 clock time, user CPU time, system CPU time spent by the process:
 .
  * process_real_cpu_clock, captures wall clock CPU time spent by the
 current process.
  * process_user_cpu_clock, captures user-CPU time
 spent by the current process.
  * process_system_cpu_clock, captures
 system-CPU time spent by the current process.
  * A tuple-like class
 process_cpu_clock, that captures real, user-CPU, and system-CPU
 process times together.
  * A thread_clock thread steady clock giving
 the time spent by the current thread (when supported by a platform).
 .
 Lastly, Boost.Chrono includes typeof registration for duration and
 time_point to permit using emulated auto with C++03 compilers.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/chrono/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-chrono1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2242
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-chrono1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-chrono1.48-dev, libboost-chrono1.49-dev, libboost-chrono1.50-dev, libboost-chrono1.52-dev, libboost-chrono1.53-dev, libboost-chrono1.54-dev, libboost-chrono1.55-dev, libboost-chrono1.57-dev, libboost-chrono1.58-dev, libboost-chrono1.60-dev, libboost-chrono1.61-dev, libboost-chrono1.62-dev, libboost-chrono1.63-dev, libboost-chrono1.65-dev, libboost-chrono1.67-dev, libboost-chrono1.70-dev, libboost-chrono1.71-dev
Description: C++ representation of time duration, time point, and clocks
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost.Chrono library provides:
 .
  * A means to represent time durations: managed by the generic
 duration class . Examples of time durations include days, minutes,
 seconds and nanoseconds, which can be represented with a fixed number
 of clock ticks per unit. All of these units of time duration are
 united with a generic interface by the duration facility.
  * A type for representing points in time: time_point. A time_point
 represents an epoch plus or minus a duration. The library leaves
 epochs unspecified. A time_point is associated with a clock.
  * Several clocks, some of which may not be available on a
 particular platform: system_clock, steady_clock and
 high_resolution_clock. A clock is a pairing of a time_point and
 duration, and a function which returns a time_point representing now.
 .
 To make the timing facilities more generally useful, Boost.Chrono
 provides a number of clocks that are thin wrappers around the
 operating system's time APIs, thereby allowing the extraction of wall
 clock time, user CPU time, system CPU time spent by the process:
 .
  * process_real_cpu_clock, captures wall clock CPU time spent by the
 current process.
  * process_user_cpu_clock, captures user-CPU time
 spent by the current process.
  * process_system_cpu_clock, captures
 system-CPU time spent by the current process.
  * A tuple-like class
 process_cpu_clock, that captures real, user-CPU, and system-CPU
 process times together.
  * A thread_clock thread steady clock giving
 the time spent by the current thread (when supported by a platform).
 .
 Lastly, Boost.Chrono includes typeof registration for duration and
 time_point to permit using emulated auto with C++03 compilers.
Homepage: http://www.boost.org/libs/chrono/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-chrono1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2085
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.17), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: C++ representation of time duration, time point, and clocks
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost.Chrono library provides:
 .
  * A means to represent time durations: managed by the generic duration
    class.Examples of time durations include days, minutes, seconds and
    nanoseconds, which can be represented with a fixed number of clock
    ticks per unit. All of these units of time duration are united with
    a generic interface by the duration facility.
  * A type for representing points in time: time_point. A time_point
    represents an epoch plus or minus a duration. The library leaves
    epochs unspecified. A time_point is associated with a clock.
  * Several clocks, some of which may not be available on a particular
    platform: system_clock, steady_clock and high_resolution_clock. A
    clock is a pairing of a time_point and duration, and a function
    which returns a time_point representing now.
 .
 To make the timing facilities more generally useful, Boost.Chrono
 provides a number of clocks that are thin wrappers around the
 operating system's time APIs, thereby allowing the extraction of wall
 clock time, user CPU time, system CPU time spent by the process:
 .
  * process_real_cpu_clock, captures wall clock CPU time spent by the
    current process.
  * process_user_cpu_clock, captures user-CPU time spent by the current
    process.
  * process_system_cpu_clock, captures system-CPU time spent by the
    current process.
  * a tuple-like class process_cpu_clock, that captures real, user-CPU,
    and system-CPU process times together.
  * a thread_clock thread steady clock giving the time spent by the
    current thread (when supported by a platform).
 .
 Lastly, Boost.Chrono includes typeof registration for duration and
 time_point to permit using emulated auto with C++03 compilers.
Homepage: http://www.boost.org/libs/chrono/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-container-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-container1.74-dev
Description: C++ library that implements several well-known containers - dev files (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Container library implements several well-known containers,
 including STL containers. The aim of the library is to offers
 advanced features not present in standard containers or to offer the
 latest standard draft features for compilers that don't comply with
 the latest C++ standard.
 .
 In short, what does Boost.Container offer?
 .
  * Move semantics are implemented, including move emulation
    for pre-C++11 compilers.
  * New advanced features (e.g. placement insertion,
    recursive containers) are present.
  * Containers support stateful allocators and are compatible with
    Boost.Interprocess (they can be safely placed in shared memory).
  * The library offers new useful containers:
    * flat_map, flat_set, flat_multimap and flat_multiset: drop-in
      replacements for standard associative containers but more
      memory friendly and with faster searches.
    * stable_vector: a std::list and std::vector hybrid container:
      vector-like random-access iterators and list-like iterator
      stability in insertions and erasures.
    * slist: the classic pre-standard singly linked list implementation
      offering constant-time size(). Note that C++11 forward_list has no size().
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://boost.org/libs/container/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-container1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2207
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-container1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-container1.65-dev, libboost-container1.67-dev, libboost-container1.70-dev, libboost-container1.71-dev
Description: C++ library that implements several well-known containers - dev files
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Container library implements several well-known containers,
 including STL containers. The aim of the library is to offers
 advanced features not present in standard containers or to offer the
 latest standard draft features for compilers that don't comply with
 the latest C++ standard.
 .
 In short, what does Boost.Container offer?
 .
  * Move semantics are implemented, including move emulation
    for pre-C++11 compilers.
  * New advanced features (e.g. placement insertion,
    recursive containers) are present.
  * Containers support stateful allocators and are compatible with
    Boost.Interprocess (they can be safely placed in shared memory).
  * The library offers new useful containers:
    * flat_map, flat_set, flat_multimap and flat_multiset: drop-in
      replacements for standard associative containers but more
      memory friendly and with faster searches.
    * stable_vector: a std::list and std::vector hybrid container:
      vector-like random-access iterators and list-like iterator
      stability in insertions and erasures.
    * slist: the classic pre-standard singly linked list implementation
      offering constant-time size(). Note that C++11 forward_list has no size().
Homepage: http://boost.org/libs/container/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-container1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5)
Description: C++ library that implements several well-known containers
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Container library implements several well-known containers,
 including STL containers. The aim of the library is to offers
 advanced features not present in standard containers or to offer the
 latest standard draft features for compilers that don't comply with
 the latest C++ standard.
 .
 In short, what does Boost.Container offer?
 .
  * Move semantics are implemented, including move emulation
    for pre-C++11 compilers.
  * New advanced features (e.g. placement insertion,
    recursive containers) are present.
  * Containers support stateful allocators and are compatible with
    Boost.Interprocess (they can be safely placed in shared memory).
  * The library offers new useful containers:
    * flat_map, flat_set, flat_multimap and flat_multiset: drop-in
      replacements for standard associative containers but more
      memory friendly and with faster searches.
    * stable_vector: a std::list and std::vector hybrid container:
      vector-like random-access iterators and list-like iterator
      stability in insertions and erasures.
    * slist: the classic pre-standard singly linked list implementation
      offering constant-time size(). Note that C++11 forward_list has no size().
Homepage: http://boost.org/libs/container/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-context-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-context1.74-dev
Description: provides a sort of cooperative multitasking on a single thread (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Context is a foundational library that provides a sort of
 cooperative multitasking on a single thread. By providing an
 abstraction of the current execution state in the current thread,
 including the stack (with local variables) and stack pointer, all
 registers and CPU flags, and the instruction pointer, a fcontext_t
 instance represents a specific point in the application's execution
 path. This is useful for building higher-level abstractions, like
 coroutines, cooperative threads (userland threads) or an equivalent
 to C# keyword yield in C++.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/context/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-context1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2066
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-thread1.74-dev (= 1.74.0-14ubuntu3), libboost-context1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-context1.53-dev, libboost-context1.54-dev, libboost-context1.55-dev, libboost-context1.57-dev, libboost-context1.58-dev, libboost-context1.60-dev, libboost-context1.61-dev, libboost-context1.62-dev, libboost-context1.63-dev, libboost-context1.65-dev, libboost-context1.67-dev, libboost-context1.70-dev, libboost-context1.71-dev
Description: provides a sort of cooperative multitasking on a single thread
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Context is a foundational library that provides a sort of
 cooperative multitasking on a single thread. By providing an
 abstraction of the current execution state in the current thread,
 including the stack (with local variables) and stack pointer, all
 registers and CPU flags, and the instruction pointer, a fcontext_t
 instance represents a specific point in the application's execution
 path. This is useful for building higher-level abstractions, like
 coroutines, cooperative threads (userland threads) or an equivalent
 to C# keyword yield in C++.
Homepage: http://www.boost.org/libs/context/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-context1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2060
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.34), libstdc++6 (>= 4.4)
Description: provides a sort of cooperative multitasking on a single thread
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Context is a foundational library that provides a sort of
 cooperative multitasking on a single thread. By providing an
 abstraction of the current execution state in the current thread,
 including the stack (with local variables) and stack pointer, all
 registers and CPU flags, and the instruction pointer, a fcontext_t
 instance represents a specific point in the application's execution
 path. This is useful for building higher-level abstractions, like
 coroutines, cooperative threads (userland threads) or an equivalent
 to C# keyword yield in C++.
Homepage: http://www.boost.org/libs/context/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-coroutine-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-coroutine1.74-dev
Description: provides a sort of cooperative multitasking on a single thread (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Coroutine provides templates for generalized subroutines which
 allow multiple entry points for suspending and resuming execution at
 certain locations. It preserves the local state of execution and
 allows re-entering subroutines more than once (useful if state must
 be kept across function calls).
 .
 Coroutines can be viewed as a language-level construct providing a
 special kind of control flow.
 .
 In contrast to threads, which are pre-emptive, coroutine switches are
 cooperative (programmer controls when a switch will happen). The
 kernel is not involved in the coroutine switches.
 .
 The implementation uses Boost.Context for context switching.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/coroutine/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-coroutine1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-context1.74-dev (= 1.74.0-14ubuntu3), libboost-coroutine1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-coroutine1.54-dev, libboost-coroutine1.55-dev, libboost-coroutine1.57-dev, libboost-coroutine1.58-dev, libboost-coroutine1.60-dev, libboost-coroutine1.61-dev, libboost-coroutine1.62-dev, libboost-coroutine1.63-dev, libboost-coroutine1.65-dev, libboost-coroutine1.67-dev, libboost-coroutine1.70-dev, libboost-coroutine1.71-dev
Description: provides a sort of cooperative multitasking on a single thread
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Coroutine provides templates for generalized subroutines which
 allow multiple entry points for suspending and resuming execution at
 certain locations. It preserves the local state of execution and
 allows re-entering subroutines more than once (useful if state must
 be kept across function calls).
 .
 Coroutines can be viewed as a language-level construct providing a
 special kind of control flow.
 .
 In contrast to threads, which are pre-emptive, coroutine switches are
 cooperative (programmer controls when a switch will happen). The
 kernel is not involved in the coroutine switches.
 .
 The implementation uses Boost.Context for context switching.
Homepage: http://www.boost.org/libs/coroutine/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-coroutine1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-context1.74.0 (>= 1.74.0), libboost-thread1.74.0 (>= 1.74.0), libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: provides a sort of cooperative multitasking on a single thread
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Coroutine provides templates for generalized subroutines which
 allow multiple entry points for suspending and resuming execution at
 certain locations. It preserves the local state of execution and
 allows re-entering subroutines more than once (useful if state must
 be kept across function calls).
 .
 Coroutines can be viewed as a language-level construct providing a
 special kind of control flow.
 .
 In contrast to threads, which are pre-emptive, coroutine switches are
 cooperative (programmer controls when a switch will happen). The
 kernel is not involved in the coroutine switches.
 .
 The implementation uses Boost.Context for context switching.
Homepage: http://www.boost.org/libs/coroutine/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-date-time-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-date-time1.74-dev
Description: set of date-time libraries based on generic programming concepts (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 These libraries are intended to make programming with dates and times
 almost as simple and natural as programming with strings and integers.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/date_time/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-date-time1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2066
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-date-time1.74.0 (= 1.74.0-14ubuntu3), libboost-serialization1.74-dev (= 1.74.0-14ubuntu3)
Conflicts: libboost-date-time1.42-dev, libboost-date-time1.46-dev, libboost-date-time1.48-dev, libboost-date-time1.49-dev, libboost-date-time1.50-dev, libboost-date-time1.52-dev, libboost-date-time1.53-dev, libboost-date-time1.54-dev, libboost-date-time1.55-dev, libboost-date-time1.57-dev, libboost-date-time1.58-dev, libboost-date-time1.60-dev, libboost-date-time1.61-dev, libboost-date-time1.62-dev, libboost-date-time1.63-dev, libboost-date-time1.65-dev, libboost-date-time1.67-dev, libboost-date-time1.70-dev, libboost-date-time1.71-dev
Description: set of date-time libraries based on generic programming concepts
 This package forms part of the Boost C++ Libraries collection.
 .
 These libraries are intended to make programming with dates and times
 almost as simple and natural as programming with strings and integers.
Homepage: http://www.boost.org/libs/date_time/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-date-time1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2060
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Description: set of date-time libraries based on generic programming concepts
 This package forms part of the Boost C++ Libraries collection.
 .
 These libraries are intended to make programming with dates and times
 almost as simple and natural as programming with strings and integers.
Homepage: http://www.boost.org/libs/date_time/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost1.74-dev
Suggests: libboost-doc
Breaks: libleatherman-dev (<< 1.12.1+dfsg-1.1~)
Description: Boost C++ Libraries development files (default version)
 The Boost web site provides free, peer-reviewed, portable C++ source
 libraries. The emphasis is on libraries which work well with the C++
 Standard Library. One goal is to establish "existing practice" and
 provide reference implementations so that the Boost libraries are
 suitable for eventual standardization. Some of the libraries have
 already been proposed for inclusion in the C++ Standards Committee's
 upcoming C++ Standard Library Technical Report.
 .
 This package provides headers for all Boost libraries.
 .
 Extended precision arithmetic package libmpfrc++-dev or libntl-dev is
 required to use the Boost.Multiprecision wrapping of the respective
 library.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: https://www.boost.org/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-exception-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-exception1.74-dev
Description: library to help write exceptions and handlers (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The purpose of Boost Exception is to ease the design of exception
 class hierarchies and to help write exception handling and error
 reporting code.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/exception/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-exception1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2048
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3)
Conflicts: libboost-exception1.50-dev, libboost-exception1.52-dev, libboost-exception1.53-dev, libboost-exception1.54-dev, libboost-exception1.55-dev, libboost-exception1.57-dev, libboost-exception1.58-dev, libboost-exception1.60-dev, libboost-exception1.61-dev, libboost-exception1.62-dev, libboost-exception1.63-dev, libboost-exception1.65-dev, libboost-exception1.67-dev, libboost-exception1.70-dev, libboost-exception1.71-dev
Description: library to help write exceptions and handlers
 This package forms part of the Boost C++ Libraries collection.
 .
 The purpose of Boost Exception is to ease the design of exception
 class hierarchies and to help write exception handling and error
 reporting code.
Homepage: http://www.boost.org/libs/exception/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-fiber-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-fiber1.74-dev
Description: cooperatively-scheduled micro-/userland-threads (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Fiber provides a framework for micro-/userland-threads (fibers)
 scheduled cooperatively.  The API contains classes and functions to
 manage and synchronize fibers similarly to standard thread support
 library.
 .
 Each fiber has its own stack.
 .
 A fiber can save the current execution state, including all registers
 and CPU flags, the instruction pointer, and the stack pointer and
 later restore this state. The idea is to have multiple execution
 paths running on a single thread using cooperative scheduling (versus
 threads, which are preemptively scheduled). The running fiber decides
 explicitly when it should yield to allow another fiber to run
 (context switching). Boost.Fiber internally uses execution_context
 from Boost.Context; the classes in this library manage, schedule and,
 when needed, synchronize those execution contexts. A context switch
 between threads usually costs thousands of CPU cycles on x86,
 compared to a fiber switch with less than a hundred cycles. A fiber
 runs on a single thread at any point in time.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/fiber/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-fiber1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2294
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-context1.74-dev (= 1.74.0-14ubuntu3), libboost-filesystem1.74-dev (= 1.74.0-14ubuntu3), libboost-fiber1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-fiber1.62-dev, libboost-fiber1.63-dev, libboost-fiber1.65-dev, libboost-fiber1.67-dev, libboost-fiber1.70-dev, libboost-fiber1.71-dev
Description: cooperatively-scheduled micro-/userland-threads
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Fiber provides a framework for micro-/userland-threads (fibers)
 scheduled cooperatively.  The API contains classes and functions to
 manage and synchronize fibers similarly to standard thread support
 library.
 .
 Each fiber has its own stack.
 .
 A fiber can save the current execution state, including all registers
 and CPU flags, the instruction pointer, and the stack pointer and
 later restore this state. The idea is to have multiple execution
 paths running on a single thread using cooperative scheduling (versus
 threads, which are preemptively scheduled). The running fiber decides
 explicitly when it should yield to allow another fiber to run
 (context switching). Boost.Fiber internally uses execution_context
 from Boost.Context; the classes in this library manage, schedule and,
 when needed, synchronize those execution contexts. A context switch
 between threads usually costs thousands of CPU cycles on x86,
 compared to a fiber switch with less than a hundred cycles. A fiber
 runs on a single thread at any point in time.
Homepage: http://www.boost.org/libs/fiber/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-fiber1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-context1.74.0 (>= 1.74.0), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 12)
Description: cooperatively-scheduled micro-/userland-threads
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Fiber provides a framework for micro-/userland-threads (fibers)
 scheduled cooperatively.  The API contains classes and functions to
 manage and synchronize fibers similarly to standard thread support
 library.
 .
 Each fiber has its own stack.
 .
 A fiber can save the current execution state, including all registers
 and CPU flags, the instruction pointer, and the stack pointer and
 later restore this state. The idea is to have multiple execution
 paths running on a single thread using cooperative scheduling (versus
 threads, which are preemptively scheduled). The running fiber decides
 explicitly when it should yield to allow another fiber to run
 (context switching). Boost.Fiber internally uses execution_context
 from Boost.Context; the classes in this library manage, schedule and,
 when needed, synchronize those execution contexts. A context switch
 between threads usually costs thousands of CPU cycles on x86,
 compared to a fiber switch with less than a hundred cycles. A fiber
 runs on a single thread at any point in time.
Homepage: http://www.boost.org/libs/fiber/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-filesystem-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-filesystem1.74-dev
Description: filesystem operations (portable paths, iteration over directories, etc) in C++ (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Filesystem Library provides portable facilities to query and
 manipulate paths, files, and directories.  The goal is to
 facilitate portable script-like operations from within C++ programs.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://boost.org/libs/filesystem/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-filesystem1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2579
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-filesystem1.74.0 (= 1.74.0-14ubuntu3), libboost-system1.74-dev (= 1.74.0-14ubuntu3)
Conflicts: libboost-filesystem1.42-dev, libboost-filesystem1.46-dev, libboost-filesystem1.48-dev, libboost-filesystem1.49-dev, libboost-filesystem1.50-dev, libboost-filesystem1.52-dev, libboost-filesystem1.53-dev, libboost-filesystem1.54-dev, libboost-filesystem1.55-dev, libboost-filesystem1.57-dev, libboost-filesystem1.58-dev, libboost-filesystem1.60-dev, libboost-filesystem1.61-dev, libboost-filesystem1.62-dev, libboost-filesystem1.63-dev, libboost-filesystem1.65-dev, libboost-filesystem1.67-dev, libboost-filesystem1.70-dev, libboost-filesystem1.71-dev
Description: filesystem operations (portable paths, iteration over directories, etc) in C++
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Filesystem Library provides portable facilities to query and
 manipulate paths, files, and directories.  The goal is to
 facilitate portable script-like operations from within C++ programs.
Homepage: http://boost.org/libs/filesystem/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-filesystem1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2169
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: filesystem operations (portable paths, iteration over directories, etc) in C++
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Filesystem Library provides portable facilities to query and
 manipulate paths, files, and directories.  The goal is to
 facilitate portable script-like operations from within C++ programs.
Homepage: http://boost.org/libs/filesystem/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-graph-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-graph1.74-dev
Description: generic graph components and algorithms in C++ (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Graphs are mathematical abstractions that are useful for solving
 many types of problems in computer science. Consequently, these
 abstractions must also be represented in computer programs. A
 standardized generic interface for traversing graphs is of utmost
 importance to encourage reuse of graph algorithms and data structures.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/graph/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-graph-parallel-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-graph-parallel1.74-dev
Description: generic graph components and algorithms in C++ (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Parallel Boost Graph Library is an extension to the Boost Graph Library
 (BGL) for parallel and distributed computing. It offers distributed graphs
 and graph algorithms to exploit coarse-grained parallelism along with
 parallel algorithms that exploit fine-grained parallelism, while retaining
 the same interfaces as the (sequential) BGL. Code written using the sequential
 BGL should be easy to parallelize with the parallel BGL.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/graph_parallel/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-graph-parallel1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2442
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-graph-parallel1.74.0 (= 1.74.0-14ubuntu3), libboost-serialization1.74-dev (= 1.74.0-14ubuntu3), libboost-test1.74-dev (= 1.74.0-14ubuntu3)
Conflicts: libboost-graph-parallel1.42-dev, libboost-graph-parallel1.46-dev, libboost-graph-parallel1.48-dev, libboost-graph-parallel1.49-dev, libboost-graph-parallel1.50-dev, libboost-graph-parallel1.52-dev, libboost-graph-parallel1.53-dev, libboost-graph-parallel1.54-dev, libboost-graph-parallel1.55-dev, libboost-graph-parallel1.57-dev, libboost-graph-parallel1.58-dev, libboost-graph-parallel1.60-dev, libboost-graph-parallel1.61-dev, libboost-graph-parallel1.62-dev, libboost-graph-parallel1.63-dev, libboost-graph-parallel1.65-dev, libboost-graph-parallel1.67-dev, libboost-graph-parallel1.70-dev, libboost-graph-parallel1.71-dev
Description: generic graph components and algorithms in C++
 This package forms part of the Boost C++ Libraries collection.
 .
 The Parallel Boost Graph Library is an extension to the Boost Graph Library
 (BGL) for parallel and distributed computing. It offers distributed graphs
 and graph algorithms to exploit coarse-grained parallelism along with
 parallel algorithms that exploit fine-grained parallelism, while retaining
 the same interfaces as the (sequential) BGL. Code written using the sequential
 BGL should be easy to parallelize with the parallel BGL.
Homepage: http://www.boost.org/libs/graph_parallel/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-graph-parallel1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2193
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-mpi1.74.0 (>= 1.74.0), libboost-serialization1.74.0 (>= 1.74.0), libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libopenmpi3 (>= 4.1.2), libstdc++6 (>= 11)
Suggests: graphviz
Description: generic graph components and algorithms in C++
 This package forms part of the Boost C++ Libraries collection.
 .
 The Parallel Boost Graph Library is an extension to the Boost Graph Library
 (BGL) for parallel and distributed computing. It offers distributed graphs
 and graph algorithms to exploit coarse-grained parallelism along with
 parallel algorithms that exploit fine-grained parallelism, while retaining
 the same interfaces as the (sequential) BGL. Code written using the sequential
 BGL should be easy to parallelize with the parallel BGL.
Homepage: http://www.boost.org/libs/graph_parallel/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-graph1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2747
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-graph1.74.0 (= 1.74.0-14ubuntu3), libboost-regex1.74-dev (= 1.74.0-14ubuntu3), libboost-serialization1.74-dev (= 1.74.0-14ubuntu3), libboost-test1.74-dev (= 1.74.0-14ubuntu3)
Conflicts: libboost-graph1.42-dev, libboost-graph1.46-dev, libboost-graph1.48-dev, libboost-graph1.49-dev, libboost-graph1.50-dev, libboost-graph1.52-dev, libboost-graph1.53-dev, libboost-graph1.54-dev, libboost-graph1.55-dev, libboost-graph1.57-dev, libboost-graph1.58-dev, libboost-graph1.60-dev, libboost-graph1.61-dev, libboost-graph1.62-dev, libboost-graph1.63-dev, libboost-graph1.65-dev, libboost-graph1.67-dev, libboost-graph1.70-dev, libboost-graph1.71-dev
Description: generic graph components and algorithms in C++
 This package forms part of the Boost C++ Libraries collection.
 .
 Graphs are mathematical abstractions that are useful for solving
 many types of problems in computer science. Consequently, these
 abstractions must also be represented in computer programs. A
 standardized generic interface for traversing graphs is of utmost
 importance to encourage reuse of graph algorithms and data structures.
Homepage: http://www.boost.org/libs/graph/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-graph1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2273
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-regex1.74.0-icu70, libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Suggests: graphviz
Description: generic graph components and algorithms in C++
 This package forms part of the Boost C++ Libraries collection.
 .
 Graphs are mathematical abstractions that are useful for solving
 many types of problems in computer science. Consequently, these
 abstractions must also be represented in computer programs. A
 standardized generic interface for traversing graphs is of utmost
 importance to encourage reuse of graph algorithms and data structures.
Homepage: http://www.boost.org/libs/graph/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-iostreams-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-iostreams1.74-dev
Description: Boost.Iostreams Library development files (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Iostreams are a collection of concepts and a set of templates
 which turn models of these concepts into C++ standard library streams
 and stream buffers.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/iostreams/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-iostreams1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2333
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-regex1.74-dev (= 1.74.0-14ubuntu3), libboost-iostreams1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-iostreams1.42-dev, libboost-iostreams1.46-dev, libboost-iostreams1.48-dev, libboost-iostreams1.49-dev, libboost-iostreams1.50-dev, libboost-iostreams1.52-dev, libboost-iostreams1.53-dev, libboost-iostreams1.54-dev, libboost-iostreams1.55-dev, libboost-iostreams1.57-dev, libboost-iostreams1.58-dev, libboost-iostreams1.60-dev, libboost-iostreams1.61-dev, libboost-iostreams1.62-dev, libboost-iostreams1.63-dev, libboost-iostreams1.65-dev, libboost-iostreams1.67-dev, libboost-iostreams1.70-dev, libboost-iostreams1.71-dev
Description: Boost.Iostreams Library development files
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Iostreams are a collection of concepts and a set of templates
 which turn models of these concepts into C++ standard library streams
 and stream buffers.
Homepage: http://www.boost.org/libs/iostreams/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-iostreams1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2137
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libbz2-1.0, libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), liblzma5 (>= 5.2.2), libstdc++6 (>= 5.2), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Description: Boost.Iostreams Library
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Iostreams are a collection of concepts and a set of templates
 which turn models of these concepts into C++ standard library streams
 and stream buffers.
Homepage: http://www.boost.org/libs/iostreams/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-locale-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-locale1.74-dev
Description: C++ facilities for localization (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Locale gives powerful tools for development of cross platform
 localized software - the software that talks to user in its language.
 .
  * Correct case conversion, case folding and normalization.
  * Collation (sorting), including support for 4 Unicode collation
 levels.
  * Date, time, timezone and calendar manipulations, formatting
 and parsing, including transparent support for calendars other than
 Gregorian.
  * Boundary analysis for characters, words, sentences and
 line-breaks.
  * Number formatting, spelling and parsing.
  * Monetary formatting and parsing.
  * Powerful message formatting (string translation) including
 support for plural forms, using GNU catalogs.
  * Character set conversion.
  * Transparent support for 8-bit character sets like Latin1
  * Support for char and wchar_t
  * Experimental support for C++0x char16_t and char32_t strings and streams.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/math/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-locale1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 5277
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-thread1.74-dev (= 1.74.0-14ubuntu3), libboost-locale1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-locale1.48-dev, libboost-locale1.49-dev, libboost-locale1.50-dev, libboost-locale1.52-dev, libboost-locale1.53-dev, libboost-locale1.54-dev, libboost-locale1.55-dev, libboost-locale1.57-dev, libboost-locale1.58-dev, libboost-locale1.60-dev, libboost-locale1.61-dev, libboost-locale1.62-dev, libboost-locale1.63-dev, libboost-locale1.65-dev, libboost-locale1.67-dev, libboost-locale1.70-dev, libboost-locale1.71-dev
Description: C++ facilities for localization
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Locale gives powerful tools for development of cross platform
 localized software - the software that talks to user in its language.
 .
  * Correct case conversion, case folding and normalization.
  * Collation (sorting), including support for 4 Unicode collation
 levels.
  * Date, time, timezone and calendar manipulations, formatting
 and parsing, including transparent support for calendars other than
 Gregorian.
  * Boundary analysis for characters, words, sentences and
 line-breaks.
  * Number formatting, spelling and parsing.
  * Monetary formatting and parsing.
  * Powerful message formatting (string translation) including
 support for plural forms, using GNU catalogs.
  * Character set conversion.
  * Transparent support for 8-bit character sets like Latin1
  * Support for char and wchar_t
  * Experimental support for C++0x char16_t and char32_t strings and streams.
Homepage: http://www.boost.org/libs/math/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-locale1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2705
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-thread1.74.0 (>= 1.74.0), libc6 (>= 2.32), libgcc-s1 (>= 3.3.1), libicu70 (>= 70.1-1~), libstdc++6 (>= 11)
Description: C++ facilities for localization
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Locale gives powerful tools for development of cross platform
 localized software - the software that talks to user in its language.
 .
  * Correct case conversion, case folding and normalization.
  * Collation (sorting), including support for 4 Unicode collation
 levels.
  * Date, time, timezone and calendar manipulations, formatting
 and parsing, including transparent support for calendars other than
 Gregorian.
  * Boundary analysis for characters, words, sentences and
 line-breaks.
  * Number formatting, spelling and parsing.
  * Monetary formatting and parsing.
  * Powerful message formatting (string translation) including
 support for plural forms, using GNU catalogs.
  * Character set conversion.
  * Transparent support for 8-bit character sets like Latin1
  * Support for char and wchar_t
  * Experimental support for C++0x char16_t and char32_t strings and streams.
Homepage: http://www.boost.org/libs/locale/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-log-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-log1.74-dev
Description: C++ logging library (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 This library aims to make logging significantly easier for the
 application developer. It provides a wide range of out-of-the-box
 tools along with public interfaces for extending the library. The
 main goals of the library are:
 .
  * Simplicity. A small example code snippet should be enough to get
 the feel of the library and be ready to use its basic features.
  * Extensibility. A user should be able to extend functionality of the
 library for collecting and storing information into logs.
  * Performance. The library should have as little performance impact on
 the user's application as possible.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/log/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-log1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 8055
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-log1.74.0 (= 1.74.0-14ubuntu3), libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-atomic1.74-dev (= 1.74.0-14ubuntu3), libboost-date-time1.74-dev (= 1.74.0-14ubuntu3), libboost-filesystem1.74-dev (= 1.74.0-14ubuntu3), libboost-system1.74-dev (= 1.74.0-14ubuntu3), libboost-regex1.74-dev (= 1.74.0-14ubuntu3), libboost-thread1.74-dev (= 1.74.0-14ubuntu3)
Conflicts: libboost-log1.54-dev, libboost-log1.55-dev, libboost-log1.57-dev, libboost-log1.58-dev, libboost-log1.60-dev, libboost-log1.61-dev, libboost-log1.62-dev, libboost-log1.63-dev, libboost-log1.65-dev, libboost-log1.67-dev, libboost-log1.70-dev, libboost-log1.71-dev
Description: C++ logging library
 This package forms part of the Boost C++ Libraries collection.
 .
 This library aims to make logging significantly easier for the
 application developer. It provides a wide range of out-of-the-box
 tools along with public interfaces for extending the library. The
 main goals of the library are:
 .
  * Simplicity. A small example code snippet should be enough to get
 the feel of the library and be ready to use its basic features.
  * Extensibility. A user should be able to extend functionality of the
 library for collecting and storing information into logs.
  * Performance. The library should have as little performance impact on
 the user's application as possible.
Homepage: http://www.boost.org/libs/log/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-log1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3352
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-filesystem1.74.0 (>= 1.74.0), libboost-regex1.74.0-icu70, libboost-thread1.74.0 (>= 1.74.0), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: C++ logging library
 This package forms part of the Boost C++ Libraries collection.
 .
 This library aims to make logging significantly easier for the
 application developer. It provides a wide range of out-of-the-box
 tools along with public interfaces for extending the library. The
 main goals of the library are:
 .
  * Simplicity. A small example code snippet should be enough to get
 the feel of the library and be ready to use its basic features.
  * Extensibility. A user should be able to extend functionality of the
 library for collecting and storing information into logs.
  * Performance. The library should have as little performance impact on
 the user's application as possible.
Homepage: http://www.boost.org/libs/log/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-math-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-math1.74-dev
Description: Boost.Math Library development files (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 This library is divided into three interconnected parts:
  * Statistical Distributions: Provides a reasonably comprehensive set of
    statistical distributions, upon which higher level statistical tests
    can be built.
  * Mathematical Special Functions: Provides a small number of high quality
    special functions, initially these were concentrated on functions used in
    statistical applications along with those in the Technical Report on
    C++ Library Extensions.
  * Implementation Toolkit: Provides many of the tools required to implement
    mathematical special functions.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/math/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-math1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 6579
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-math1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-math1.42-dev, libboost-math1.46-dev, libboost-math1.48-dev, libboost-math1.49-dev, libboost-math1.50-dev, libboost-math1.52-dev, libboost-math1.53-dev, libboost-math1.54-dev, libboost-math1.55-dev, libboost-math1.57-dev, libboost-math1.58-dev, libboost-math1.60-dev, libboost-math1.61-dev, libboost-math1.62-dev, libboost-math1.63-dev, libboost-math1.65-dev, libboost-math1.67-dev, libboost-math1.70-dev, libboost-math1.71-dev
Description: Boost.Math Library development files
 This package forms part of the Boost C++ Libraries collection.
 .
 This library is divided into three interconnected parts:
  * Statistical Distributions: Provides a reasonably comprehensive set of
    statistical distributions, upon which higher level statistical tests
    can be built.
  * Mathematical Special Functions: Provides a small number of high quality
    special functions, initially these were concentrated on functions used in
    statistical applications along with those in the Technical Report on
    C++ Library Extensions.
  * Implementation Toolkit: Provides many of the tools required to implement
    mathematical special functions.
Homepage: http://www.boost.org/libs/math/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-math1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2736
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 9)
Description: Boost.Math Library
 This package forms part of the Boost C++ Libraries collection.
 .
 This library is divided into three interconnected parts:
  * Statistical Distributions: Provides a reasonably comprehensive set of
    statistical distributions, upon which higher level statistical tests
    can be built.
  * Mathematical Special Functions: Provides a small number of high quality
    special functions, initially these were concentrated on functions used in
    statistical applications along with those in the Technical Report on
    C++ Library Extensions.
  * Implementation Toolkit: Provides many of the tools required to implement
    mathematical special functions.
Homepage: http://www.boost.org/libs/math/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-mpi-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-mpi1.74-dev
Description: C++ interface to the Message Passing Interface (MPI) (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost.MPI library provides a C++ interface to MPI that
 supports modern C++ development styles, including complete support for
 user-defined data types and C++ Standard Library types, arbitrary function
 objects for collective algorithms, and the use of modern C++ library
 techniques to maintain maximal efficiency.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/doc/html/mpi.html
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-mpi-python-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-mpi-python1.74-dev
Description: C++ interface to the Message Passing Interface (MPI), Python Bindings (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost.MPI library provides a C++ interface to MPI that
 supports modern C++ development styles, including complete support for
 user-defined data types and C++ Standard Library types, arbitrary function
 objects for collective algorithms, and the use of modern C++ library
 techniques to maintain maximal efficiency.
 .
 This package provides Python Bindings to the C++ interface.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/doc/html/mpi/python.html
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-mpi-python1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2085
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-mpi1.74-dev (= 1.74.0-14ubuntu3), libboost-mpi-python1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-mpi-python1.42-dev, libboost-mpi-python1.46-dev, libboost-mpi-python1.48-dev, libboost-mpi-python1.49-dev, libboost-mpi-python1.50-dev, libboost-mpi-python1.52-dev, libboost-mpi-python1.53-dev, libboost-mpi-python1.54-dev, libboost-mpi-python1.55-dev, libboost-mpi-python1.57-dev, libboost-mpi-python1.58-dev, libboost-mpi-python1.60-dev, libboost-mpi-python1.61-dev, libboost-mpi-python1.62-dev, libboost-mpi-python1.63-dev, libboost-mpi-python1.65-dev, libboost-mpi-python1.67-dev, libboost-mpi-python1.70-dev, libboost-mpi-python1.71-dev
Description: C++ interface to the Message Passing Interface (MPI), Python Bindings
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost.MPI library provides a C++ interface to MPI that
 supports modern C++ development styles, including complete support for
 user-defined data types and C++ Standard Library types, arbitrary function
 objects for collective algorithms, and the use of modern C++ library
 techniques to maintain maximal efficiency.
 .
 This package provides Python Bindings to the C++ interface.
Homepage: http://www.boost.org/doc/html/mpi/python.html
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-mpi-python1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2481
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Provides: libboost-mpi-python1.74.0-py310
Depends: libboost-mpi1.74.0 (>= 1.74.0), libboost-python1.74.0 (>= 1.74.0), libboost-serialization1.74.0 (>= 1.74.0), libc6 (>= 2.32), libgcc-s1 (>= 3.3.1), libopenmpi3 (>= 4.1.2), libstdc++6 (>= 11), python3 (<< 3.11), python3 (>= 3.10~), python3:any, mpi-default-bin
Conflicts: libboost-mpi-python1.40.0, libboost-mpi-python1.41.0, libboost-mpi-python1.42.0, libboost-mpi-python1.46.0, libboost-mpi-python1.46.1, libboost-mpi-python1.48.0, libboost-mpi-python1.49.0, libboost-mpi-python1.50.0, libboost-mpi-python1.52.0, libboost-mpi-python1.53.0, libboost-mpi-python1.54.0, libboost-mpi-python1.55.0, libboost-mpi-python1.57.0, libboost-mpi-python1.58.0, libboost-mpi-python1.60.0, libboost-mpi-python1.61.0, libboost-mpi-python1.62.0, libboost-mpi-python1.63.0, libboost-mpi-python1.65.1, libboost-mpi-python1.67.0, libboost-mpi-python1.70.0, libboost-mpi-python1.71.0
Description: C++ interface to the Message Passing Interface (MPI), Python Bindings
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost.MPI library provides a C++ interface to MPI that
 supports modern C++ development styles, including complete support for
 user-defined data types and C++ Standard Library types, arbitrary function
 objects for collective algorithms, and the use of modern C++ library
 techniques to maintain maximal efficiency.
 .
 This package provides Python Bindings to the C++ interface.
 .
 One of the python interpreter packages is required to use the bindings.
Homepage: http://www.boost.org/doc/html/mpi/python.html
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-mpi1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2658
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-serialization1.74-dev (= 1.74.0-14ubuntu3), libboost-mpi1.74.0 (= 1.74.0-14ubuntu3), mpi-default-dev
Suggests: libboost-graph1.74-dev
Conflicts: libboost-mpi1.42-dev, libboost-mpi1.46-dev, libboost-mpi1.48-dev, libboost-mpi1.49-dev, libboost-mpi1.50-dev, libboost-mpi1.52-dev, libboost-mpi1.53-dev, libboost-mpi1.54-dev, libboost-mpi1.55-dev, libboost-mpi1.57-dev, libboost-mpi1.58-dev, libboost-mpi1.60-dev, libboost-mpi1.61-dev, libboost-mpi1.62-dev, libboost-mpi1.63-dev, libboost-mpi1.65-dev, libboost-mpi1.67-dev, libboost-mpi1.70-dev, libboost-mpi1.71-dev
Description: C++ interface to the Message Passing Interface (MPI)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost.MPI library provides a C++ interface to MPI that
 supports modern C++ development styles, including complete support for
 user-defined data types and C++ Standard Library types, arbitrary function
 objects for collective algorithms, and the use of modern C++ library
 techniques to maintain maximal efficiency.
Homepage: http://www.boost.org/doc/html/mpi.html
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-mpi1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2185
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-serialization1.74.0 (>= 1.74.0), libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libopenmpi3 (>= 4.1.2), libstdc++6 (>= 6)
Description: C++ interface to the Message Passing Interface (MPI)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost.MPI library provides a C++ interface to MPI that
 supports modern C++ development styles, including complete support for
 user-defined data types and C++ Standard Library types, arbitrary function
 objects for collective algorithms, and the use of modern C++ library
 techniques to maintain maximal efficiency.
Homepage: http://www.boost.org/doc/html/mpi.html
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-nowide-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-nowide1.74-dev
Description: Standard library functions with UTF-8 API on Windows development files (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The library provides an implementation of standard C and C++
 library functions which are UTF-8 aware on Windows without
 requiring to use the Wipe API.
 .
 On POSIX platforms, where UTF-8 is already commonly used, the
 calls in Nowide just alias to their standard counterparts.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/python/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-nowide1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2066
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-nowide1.74.0 (= 1.74.0-14ubuntu3)
Suggests: libboost1.74-doc
Conflicts: libboost-numpy1.65-dev, libboost-numpy1.67-dev, libboost-numpy1.70-dev, libboost-numpy1.71-dev
Description: Standard library functions with UTF-8 API on Windows development files
 This package forms part of the Boost C++ Libraries collection.
 .
 The library provides an implementation of standard C and C++
 library functions which are UTF-8 aware on Windows without
 requiring to use the Wipe API.
 .
 On POSIX platforms, where UTF-8 is already commonly used, the
 calls in Nowide just alias to their standard counterparts.
Homepage: http://www.boost.org/libs/python/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-nowide1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2061
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 4.1.1)
Suggests: python3
Description: Standard library functions with UTF-8 API on Windows
 This package forms part of the Boost C++ Libraries collection.
 .
 The library provides an implementation of standard C and C++
 library functions which are UTF-8 aware on Windows without
 requiring to use the Wipe API.
 .
 On POSIX platforms, where UTF-8 is already commonly used, the
 calls in Nowide just alias to their standard counterparts.
Homepage: http://www.boost.org/libs/python/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-numpy-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-numpy1.74-dev
Description: Boost.Python NumPy extensions development files (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Python library enables exporting a C++ library to Python.
 The NumPy extensions lets the C++ code interact with NumPy types.
 .
 This package allows development of a Python interface for all current
 versions of Python in Debian.  Code using this library will need also
 one of the Python development packages.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/python/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-numpy1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2155
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-numpy1.74.0 (= 1.74.0-14ubuntu3)
Suggests: libboost1.74-doc
Conflicts: libboost-numpy1.65-dev, libboost-numpy1.67-dev, libboost-numpy1.70-dev, libboost-numpy1.71-dev
Description: Boost.Python NumPy extensions development files
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Python library enables exporting a C++ library to Python.
 The NumPy extensions lets the C++ code interact with NumPy types.
 .
 This package allows development of a Python interface for all current
 versions of Python in Debian.  Code using this library will need also
 one of the Python development packages.
Homepage: http://www.boost.org/libs/python/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-numpy1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2093
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Provides: libboost-numpy1.74.0-py310
Depends: libboost-python1.74.0 (>= 1.74.0), libc6 (>= 2.4), libgcc-s1 (>= 3.0), libstdc++6 (>= 5)
Suggests: python3
Description: Boost.Python NumPy extensions
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Python library enables exporting a C++ library to Python.
 The NumPy extensions lets the C++ code interact with NumPy types.
 .
 One of the python interpreter packages is required to use the
 created extensions.
Homepage: http://www.boost.org/libs/python/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-program-options-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-program-options1.74-dev
Description: program options library for C++ (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Library to let program developers obtain program options, that is
 (name, value) pairs from the user, via conventional methods such as
 command line and config file.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/program_options/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-program-options1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-program-options1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-program-options1.42-dev, libboost-program-options1.46-dev, libboost-program-options1.48-dev, libboost-program-options1.49-dev, libboost-program-options1.50-dev, libboost-program-options1.52-dev, libboost-program-options1.53-dev, libboost-program-options1.54-dev, libboost-program-options1.55-dev, libboost-program-options1.57-dev, libboost-program-options1.58-dev, libboost-program-options1.60-dev, libboost-program-options1.61-dev, libboost-program-options1.62-dev, libboost-program-options1.63-dev, libboost-program-options1.65-dev, libboost-program-options1.67-dev, libboost-program-options1.70-dev, libboost-program-options1.71-dev
Description: program options library for C++
 This package forms part of the Boost C++ Libraries collection.
 .
 Library to let program developers obtain program options, that is
 (name, value) pairs from the user, via conventional methods such as
 command line and config file.
Homepage: http://www.boost.org/libs/program_options/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-program-options1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2317
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: program options library for C++
 This package forms part of the Boost C++ Libraries collection.
 .
 Library to let program developers obtain program options, that is
 (name, value) pairs from the user, via conventional methods such as
 command line and config file.
Homepage: http://www.boost.org/libs/program_options/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-python-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-python1.74-dev
Description: Boost.Python Library development files (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Python Library is used to quickly and easily export a C++
 library to Python such that the Python interface is very similar to
 the C++ interface. It is designed to be minimally intrusive on your
 C++ design. In most cases, you should not have to alter your C++
 classes in any way in order to use them with Boost.Python.  The
 system should simply "reflect" your C++ classes and functions into
 Python. The major features of Boost.Python include support for:
 Subclassing extension types in Python, Overriding virtual functions
 in Python, Member function Overloading, Automatic wrapping of
 numeric operators among others.
 .
 This package allows development of a Python interface for all current
 versions of Python in Debian.  Code using this library will need also
 one of the Python development packages.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/python/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-python1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2698
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-python1.74.0 (= 1.74.0-14ubuntu3), libpython3-dev, python3-dev:any
Suggests: libboost1.74-doc, gccxml
Conflicts: libboost-python1.42-dev, libboost-python1.46-dev, libboost-python1.48-dev, libboost-python1.49-dev, libboost-python1.50-dev, libboost-python1.52-dev, libboost-python1.53-dev, libboost-python1.54-dev, libboost-python1.55-dev, libboost-python1.57-dev, libboost-python1.58-dev, libboost-python1.60-dev, libboost-python1.61-dev, libboost-python1.62-dev, libboost-python1.63-dev, libboost-python1.65-dev, libboost-python1.67-dev, libboost-python1.70-dev, libboost-python1.71-dev
Description: Boost.Python Library development files
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Python Library is used to quickly and easily export a C++
 library to Python such that the Python interface is very similar to
 the C++ interface. It is designed to be minimally intrusive on your
 C++ design. In most cases, you should not have to alter your C++
 classes in any way in order to use them with Boost.Python.  The
 system should simply "reflect" your C++ classes and functions into
 Python. The major features of Boost.Python include support for:
 Subclassing extension types in Python, Overriding virtual functions
 in Python, Member function Overloading, Automatic wrapping of
 numeric operators among others.
 .
 This package allows development of a Python interface for all current
 versions of Python in Debian.  Code using this library will need also
 one of the Python development packages.
Homepage: http://www.boost.org/libs/python/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-python1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2284
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: boost1.74
Version: 1.74.0-14ubuntu3
Provides: libboost-python1.74.0-py310
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Suggests: python3
Description: Boost.Python Library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Python Library is used to quickly and easily export a C++
 library to Python such that the Python interface is very similar to
 the C++ interface. It is designed to be minimally intrusive on your
 C++ design. In most cases, you should not have to alter your C++
 classes in any way in order to use them with Boost.Python.  The
 system should simply "reflect" your C++ classes and functions into
 Python. The major features of Boost.Python include support for:
 Subclassing extension types in Python, Overriding virtual functions
 in Python, Member function Overloading, Automatic wrapping of
 numeric operators among others.
 .
 One of the python interpreter packages is required to use the
 created extensions.
Homepage: http://www.boost.org/libs/python/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-random-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-random1.74-dev
Description: Boost Random Number Library (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Random Number Library (Boost.Random for short) provides a
 variety of generators and distributions to produce random numbers
 having useful properties, such as uniform distribution.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/random/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-random1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-system1.74-dev (= 1.74.0-14ubuntu3), libboost-random1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-random1.42-dev, libboost-random1.46-dev, libboost-random1.48-dev, libboost-random1.49-dev, libboost-random1.50-dev, libboost-random1.52-dev, libboost-random1.53-dev, libboost-random1.54-dev, libboost-random1.55-dev, libboost-random1.57-dev, libboost-random1.58-dev, libboost-random1.60-dev, libboost-random1.61-dev, libboost-random1.62-dev, libboost-random1.63-dev, libboost-random1.65-dev, libboost-random1.67-dev, libboost-random1.70-dev, libboost-random1.71-dev
Description: Boost Random Number Library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Random Number Library (Boost.Random for short) provides a
 variety of generators and distributions to produce random numbers
 having useful properties, such as uniform distribution.
Homepage: http://www.boost.org/libs/random/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-random1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2081
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: Boost Random Number Library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Random Number Library (Boost.Random for short) provides a
 variety of generators and distributions to produce random numbers
 having useful properties, such as uniform distribution.
Homepage: http://www.boost.org/libs/random/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-regex-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-regex1.74-dev
Description: regular expression library for C++ (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Regular expressions are a form of pattern-matching that are often
 used in text processing; many users will be familiar with the Unix
 utilities grep, sed and awk, and the programming language perl, each
 of which make extensive use of regular expressions. Traditionally C++
 users have been limited to the POSIX C APIs for manipulating regular
 expressions, and while regex does provide these APIs, they do not
 represent the best way to use the library. For example regex can cope
 with wide character strings, or search and replace operations (in a
 manner analogous to either sed or perl), something that traditional C
 libraries can not do.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/regex/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-regex1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 4852
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-regex1.74.0 (= 1.74.0-14ubuntu3), libicu-dev
Conflicts: libboost-regex1.42-dev, libboost-regex1.46-dev, libboost-regex1.48-dev, libboost-regex1.49-dev, libboost-regex1.50-dev, libboost-regex1.52-dev, libboost-regex1.53-dev, libboost-regex1.54-dev, libboost-regex1.55-dev, libboost-regex1.57-dev, libboost-regex1.58-dev, libboost-regex1.60-dev, libboost-regex1.61-dev, libboost-regex1.62-dev, libboost-regex1.63-dev, libboost-regex1.65-dev, libboost-regex1.67-dev, libboost-regex1.70-dev, libboost-regex1.71-dev
Description: regular expression library for C++
 This package forms part of the Boost C++ Libraries collection.
 .
 Regular expressions are a form of pattern-matching that are often
 used in text processing; many users will be familiar with the Unix
 utilities grep, sed and awk, and the programming language perl, each
 of which make extensive use of regular expressions. Traditionally C++
 users have been limited to the POSIX C APIs for manipulating regular
 expressions, and while regex does provide these APIs, they do not
 represent the best way to use the library. For example regex can cope
 with wide character strings, or search and replace operations (in a
 manner analogous to either sed or perl), something that traditional C
 libraries can not do.
Homepage: http://www.boost.org/libs/regex/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-regex1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3013
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Provides: libboost-regex1.74.0-icu70
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libicu70 (>= 70.1-1~), libstdc++6 (>= 11)
Description: regular expression library for C++
 This package forms part of the Boost C++ Libraries collection.
 .
 Regular expressions are a form of pattern-matching that are often
 used in text processing; many users will be familiar with the Unix
 utilities grep, sed and awk, and the programming language perl, each
 of which make extensive use of regular expressions. Traditionally C++
 users have been limited to the POSIX C APIs for manipulating regular
 expressions, and while regex does provide these APIs, they do not
 represent the best way to use the library. For example regex can cope
 with wide character strings, or search and replace operations (in a
 manner analogous to either sed or perl), something that traditional C
 libraries can not do.
Homepage: http://www.boost.org/libs/regex/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-serialization-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-serialization1.74-dev
Description: serialization library for C++ (default version)
 This package forms part of the Boost C++ Libraries collection,
 containing the following functionalities:
 .
  * proper restoration of pointers to shared data
  * serialization of STL containers and other commonly used templates
  * data portability - streams of bytes created on one platform should
    be readable on any other
  * archive interface must be rich enough to permit the creation of an
    archive that presents serialized data as XML in a useful manner
 .
 Here, "serialization" means the reversible deconstruction of an
 arbitrary set of C++ data structures to a sequence of bytes.
 archive: to refer to a specific rendering of this stream of bytes.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/serialization/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-serialization1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 4024
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-serialization1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-serialization1.42-dev, libboost-serialization1.46-dev, libboost-serialization1.48-dev, libboost-serialization1.49-dev, libboost-serialization1.50-dev, libboost-serialization1.52-dev, libboost-serialization1.53-dev, libboost-serialization1.54-dev, libboost-serialization1.55-dev, libboost-serialization1.57-dev, libboost-serialization1.58-dev, libboost-serialization1.60-dev, libboost-serialization1.61-dev, libboost-serialization1.62-dev, libboost-serialization1.63-dev, libboost-serialization1.65-dev, libboost-serialization1.67-dev, libboost-serialization1.70-dev, libboost-serialization1.71-dev
Description: serialization library for C++
 This package forms part of the Boost C++ Libraries collection,
 containing the following functionalities:
 .
  * proper restoration of pointers to shared data
  * serialization of STL containers and other commonly used templates
  * data portability - streams of bytes created on one platform should
    be readable on any other
  * archive interface must be rich enough to permit the creation of an
    archive that presents serialized data as XML in a useful manner
 .
 Here, "serialization" means the reversible deconstruction of an
 arbitrary set of C++ data structures to a sequence of bytes.
 archive: to refer to a specific rendering of this stream of bytes.
Homepage: http://www.boost.org/libs/serialization/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-serialization1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2480
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.32), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: serialization library for C++
 This package forms part of the Boost C++ Libraries collection,
 containing the following functionalities:
 .
  * proper restoration of pointers to shared data
  * serialization of STL containers and other commonly used templates
  * data portability - streams of bytes created on one platform should
    be readable on any other
  * archive interface must be rich enough to permit the creation of an
    archive that presents serialized data as XML in a useful manner
 .
 Here, "serialization" means the reversible deconstruction of an
 arbitrary set of C++ data structures to a sequence of bytes.
 archive: to refer to a specific rendering of this stream of bytes.
Homepage: http://www.boost.org/libs/serialization/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-stacktrace-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-stacktrace1.74-dev
Description: library to capture and print stack traces - development files (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Stacktrace library is a simple C++03 library that provides
 information about call sequence in a human-readable form.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://boost.org/libs/stacktrace/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-stacktrace1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-stacktrace1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-stacktrace1.65-dev, libboost-stacktrace1.67-dev, libboost-stacktrace1.70-dev, libboost-stacktrace1.71-dev
Description: library to capture and print stack traces - development files
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Stacktrace library is a simple C++03 library that provides
 information about call sequence in a human-readable form.
Homepage: http://boost.org/libs/stacktrace/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-stacktrace1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2189
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: library to capture and print stack traces
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Stacktrace library is a simple C++03 library that provides
 information about call sequence in a human-readable form.
Homepage: http://boost.org/libs/stacktrace/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-system-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-system1.74-dev
Description: Operating system (e.g. diagnostics support) library (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost System library provides simple, light-weight error_code
 objects that encapsulate system-specific error code values, yet also
 provide access to more abstract and portable error conditions via
 error_condition objects. Because error_code objects can represent
 errors from sources other than the operating system, including
 user-defined sources, each error_code and error_condition has an
 associated error_category.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/system/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-system1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2057
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-system1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-system1.42-dev, libboost-system1.46-dev, libboost-system1.48-dev, libboost-system1.49-dev, libboost-system1.50-dev, libboost-system1.52-dev, libboost-system1.53-dev, libboost-system1.54-dev, libboost-system1.55-dev, libboost-system1.57-dev, libboost-system1.58-dev, libboost-system1.60-dev, libboost-system1.61-dev, libboost-system1.62-dev, libboost-system1.63-dev, libboost-system1.65-dev, libboost-system1.67-dev, libboost-system1.70-dev, libboost-system1.71-dev
Description: Operating system (e.g. diagnostics support) library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost System library provides simple, light-weight error_code
 objects that encapsulate system-specific error code values, yet also
 provide access to more abstract and portable error conditions via
 error_condition objects. Because error_code objects can represent
 errors from sources other than the operating system, including
 user-defined sources, each error_code and error_condition has an
 associated error_category.
Homepage: http://www.boost.org/libs/system/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-system1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2060
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Description: Operating system (e.g. diagnostics support) library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost System library provides simple, light-weight error_code
 objects that encapsulate system-specific error code values, yet also
 provide access to more abstract and portable error conditions via
 error_condition objects. Because error_code objects can represent
 errors from sources other than the operating system, including
 user-defined sources, each error_code and error_condition has an
 associated error_category.
Homepage: http://www.boost.org/libs/system/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-test-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-test1.74-dev
Description: components for writing and executing test suites (default version)
 This package forms part of the Boost C++ Libraries collection.  The
 library contains several components.
 .
  * Basic execution, error detection, and reporting facility.
  * Facilities to monitor program execution and produce error reports.
  * Unit test framework to simplify writing test cases.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/test/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-test1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 6776
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-test1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-test1.42-dev, libboost-test1.46-dev, libboost-test1.48-dev, libboost-test1.49-dev, libboost-test1.50-dev, libboost-test1.52-dev, libboost-test1.53-dev, libboost-test1.54-dev, libboost-test1.55-dev, libboost-test1.57-dev, libboost-test1.58-dev, libboost-test1.60-dev, libboost-test1.61-dev, libboost-test1.62-dev, libboost-test1.63-dev, libboost-test1.65-dev, libboost-test1.67-dev, libboost-test1.70-dev, libboost-test1.71-dev
Description: components for writing and executing test suites
 This package forms part of the Boost C++ Libraries collection.  The
 library contains several components.
 .
  * Basic execution, error detection, and reporting facility.
  * Facilities to monitor program execution and produce error reports.
  * Unit test framework to simplify writing test cases.
Homepage: http://www.boost.org/libs/test/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-test1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2712
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.17), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: components for writing and executing test suites
 This package forms part of the Boost C++ Libraries collection.  The
 library contains several components.
 .
  * Basic execution, error detection, and reporting facility.
  * Facilities to monitor program execution and produce error reports.
  * Unit test framework to simplify writing test cases.
Homepage: http://www.boost.org/libs/test/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-thread-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-thread1.74-dev
Description: portable C++ multi-threading (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Toolkit for writing C++ programs that execute as multiple,
 asynchronous, independent, threads-of-execution. Each thread has its
 own machine state including program instruction counter and
 registers.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/thread/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-thread1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2411
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-atomic1.74-dev (= 1.74.0-14ubuntu3), libboost-chrono1.74-dev (= 1.74.0-14ubuntu3), libboost-date-time1.74-dev (= 1.74.0-14ubuntu3), libboost-system1.74-dev (= 1.74.0-14ubuntu3), libboost-thread1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-thread1.42-dev, libboost-thread1.46-dev, libboost-thread1.48-dev, libboost-thread1.49-dev, libboost-thread1.50-dev, libboost-thread1.52-dev, libboost-thread1.53-dev, libboost-thread1.54-dev, libboost-thread1.55-dev, libboost-thread1.57-dev, libboost-thread1.58-dev, libboost-thread1.60-dev, libboost-thread1.61-dev, libboost-thread1.62-dev, libboost-thread1.63-dev, libboost-thread1.65-dev, libboost-thread1.67-dev, libboost-thread1.70-dev, libboost-thread1.71-dev
Description: portable C++ multi-threading
 This package forms part of the Boost C++ Libraries collection.
 .
 Toolkit for writing C++ programs that execute as multiple,
 asynchronous, independent, threads-of-execution. Each thread has its
 own machine state including program instruction counter and
 registers.
Homepage: http://www.boost.org/libs/thread/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-thread1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2177
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: portable C++ multi-threading
 This package forms part of the Boost C++ Libraries collection.
 .
 Toolkit for writing C++ programs that execute as multiple,
 asynchronous, independent, threads-of-execution. Each thread has its
 own machine state including program instruction counter and
 registers.
Homepage: http://www.boost.org/libs/thread/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-timer-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-timer1.74-dev
Description: C++ wall clock and CPU process timers (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 Portable C++ timer classes that answer the question "How long does my
 C++ code take to run?" with as little as one #include and one
 additional line of code.
 .
 Class cpu_timer measures wall clock time, user CPU process time, and
 system CPU process time. Class auto_cpu_timer is a refinement of
 cpu_timer that automatically reports the elapsed times when an
 auto_cpu_timer object is destroyed.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/timer/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-timer1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2115
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-chrono1.74-dev (= 1.74.0-14ubuntu3), libboost-timer1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-timer1.42-dev, libboost-timer1.46-dev, libboost-timer1.48-dev, libboost-timer1.49-dev, libboost-timer1.50-dev, libboost-timer1.52-dev, libboost-timer1.53-dev, libboost-timer1.54-dev, libboost-timer1.55-dev, libboost-timer1.57-dev, libboost-timer1.58-dev, libboost-timer1.60-dev, libboost-timer1.61-dev, libboost-timer1.62-dev, libboost-timer1.63-dev, libboost-timer1.65-dev, libboost-timer1.67-dev, libboost-timer1.70-dev, libboost-timer1.71-dev
Description: C++ wall clock and CPU process timers
 This package forms part of the Boost C++ Libraries collection.
 .
 Portable C++ timer classes that answer the question "How long does my
 C++ code take to run?" with as little as one #include and one
 additional line of code.
 .
 Class cpu_timer measures wall clock time, user CPU process time, and
 system CPU process time. Class auto_cpu_timer is a refinement of
 cpu_timer that automatically reports the elapsed times when an
 auto_cpu_timer object is destroyed.
Homepage: http://www.boost.org/libs/timer/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-timer1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2081
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-chrono1.74.0 (>= 1.74.0), libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: C++ wall clock and CPU process timers
 This package forms part of the Boost C++ Libraries collection.
 .
 Portable C++ timer classes that answer the question "How long does my
 C++ code take to run?" with as little as one #include and one
 additional line of code.
 .
 Class cpu_timer measures wall clock time, user CPU process time, and
 system CPU process time. Class auto_cpu_timer is a refinement of
 cpu_timer that automatically reports the elapsed times when an
 auto_cpu_timer object is destroyed.
Homepage: http://www.boost.org/libs/timer/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-tools-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost1.74-tools-dev
Description: Boost C++ Libraries development tools (default version)
 The Boost web site provides free, peer-reviewed, portable C++ source
 libraries. The emphasis is on libraries which work well with the C++
 Standard Library. One goal is to establish "existing practice" and
 provide reference implementations so that the Boost libraries are
 suitable for eventual standardization. Some of the libraries have
 already been proposed for inclusion in the C++ Standards Committee's
 upcoming C++ Standard Library Technical Report.
 .
 This package provides the auxiliary tools bjam, Boost.Build, bcp,
 inspect, boostbook and quickbook.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: https://www.boost.org/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-type-erasure-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-type-erasure1.74-dev
Description: C++ runtime polymorphism based on concepts (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 C++ has two distinct kinds of polymorphism, virtual functions and templates,
 each of which has its own advantages and disadvantages.  The Boost.TypeErasure
 library combines the superior abstraction capabilities of templates, with the
 runtime flexibility of virtual functions.
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/doc/libs/1_60_0/doc/html/boost_typeerasure.html
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-type-erasure1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2177
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-system1.74-dev (= 1.74.0-14ubuntu3), libboost-thread1.74-dev (= 1.74.0-14ubuntu3), libboost-type-erasure1.74.0 (= 1.74.0-14ubuntu3)
Conflicts: libboost-type-erasure1.60-dev, libboost-type-erasure1.61-dev, libboost-type-erasure1.62-dev, libboost-type-erasure1.63-dev, libboost-type-erasure1.65-dev, libboost-type-erasure1.67-dev, libboost-type-erasure1.70-dev, libboost-type-erasure1.71-dev
Description: C++ runtime polymorphism based on concepts
 This package forms part of the Boost C++ Libraries collection.
 .
 C++ has two distinct kinds of polymorphism, virtual functions and templates,
 each of which has its own advantages and disadvantages.  The Boost.TypeErasure
 library combines the superior abstraction capabilities of templates, with the
 runtime flexibility of virtual functions.
Homepage: http://www.boost.org/doc/libs/1_60_0/doc/html/boost_typeerasure.html
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-type-erasure1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2105
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-thread1.74.0 (>= 1.74.0), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: C++ runtime polymorphism based on concepts
 This package forms part of the Boost C++ Libraries collection.
 .
 C++ has two distinct kinds of polymorphism, virtual functions and templates,
 each of which has its own advantages and disadvantages.  The Boost.TypeErasure
 library combines the superior abstraction capabilities of templates, with the
 runtime flexibility of virtual functions.
Homepage: http://www.boost.org/doc/libs/1_60_0/doc/html/boost_typeerasure.html
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-wave-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost-defaults
Version: 1.74.0.3ubuntu7
Depends: libboost-wave1.74-dev
Description: C99/C++ preprocessor library (default version)
 This package forms part of the Boost C++ Libraries collection.
 .
 The Wave C++ preprocessor library is a Standards conformant
 implementation of the mandated C99/C++ preprocessor functionality
 packed behind a simple to use interface, which integrates well with
 the well known idioms of the Standard Template Library (STL).
 .
 This package is a dependency package, which depends on Debian's default
 Boost version (currently 1.74).
Homepage: http://www.boost.org/libs/wave/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-wave1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 6570
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost1.74-dev (= 1.74.0-14ubuntu3), libboost-serialization1.74-dev (= 1.74.0-14ubuntu3), libboost-wave1.74.0 (= 1.74.0-14ubuntu3), libboost-filesystem1.74-dev (= 1.74.0-14ubuntu3)
Conflicts: libboolibboost1.6-dev, libboost-wave1.42-dev, libboost-wave1.46-dev, libboost-wave1.48-dev, libboost-wave1.49-dev, libboost-wave1.50-dev, libboost-wave1.52-dev, libboost-wave1.53-dev, libboost-wave1.54-dev, libboost-wave1.55-dev, libboost-wave1.57-dev, libboost-wave1.58-dev, libboost-wave1.60-dev, libboost-wave1.62-dev, libboost-wave1.63-dev, libboost-wave1.65-dev, libboost-wave1.67-dev, libboost-wave1.70-dev, libboost-wave1.71-dev
Description: C99/C++ preprocessor library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Wave C++ preprocessor library is a Standards conformant
 implementation of the mandated C99/C++ preprocessor functionality
 packed behind a simple to use interface, which integrates well with
 the well known idioms of the Standard Template Library (STL).
Homepage: http://www.boost.org/libs/wave/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost-wave1.74.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2885
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Depends: libboost-thread1.74.0 (>= 1.74.0), libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: C99/C++ preprocessor library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Wave C++ preprocessor library is a Standards conformant
 implementation of the mandated C99/C++ preprocessor functionality
 packed behind a simple to use interface, which integrates well with
 the well known idioms of the Standard Template Library (STL).
Homepage: http://www.boost.org/libs/wave/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost1.74-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 138248
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: boost1.74
Version: 1.74.0-14ubuntu3
Replaces: libleatherman-dev (<< 1.12.1+dfsg-1.1~)
Depends: libstdc++-11-dev
Suggests: libboost1.74-doc, libboost-atomic1.74-dev, libboost-chrono1.74-dev, libboost-container1.74-dev, libboost-context1.74-dev, libboost-contract1.74-dev, libboost-coroutine1.74-dev, libboost-date-time1.74-dev, libboost-exception1.74-dev, libboost-fiber1.74-dev, libboost-filesystem1.74-dev, libboost-graph1.74-dev, libboost-graph-parallel1.74-dev, libboost-iostreams1.74-dev, libboost-locale1.74-dev, libboost-log1.74-dev, libboost-math1.74-dev, libboost-mpi1.74-dev, libboost-mpi-python1.74-dev, libboost-numpy1.74-dev, libboost-program-options1.74-dev, libboost-python1.74-dev, libboost-random1.74-dev, libboost-regex1.74-dev, libboost-serialization1.74-dev, libboost-stacktrace1.74-dev, libboost-system1.74-dev, libboost-test1.74-dev, libboost-thread1.74-dev, libboost-timer1.74-dev, libboost-type-erasure1.74-dev, libboost-wave1.74-dev, libboost1.74-tools-dev, libmpfrc++-dev, libntl-dev, libboost-nowide1.74-dev
Breaks: libleatherman-dev (<< 1.12.1+dfsg-1.1~)
Conflicts: bjam, boost-build, libboost1.42-dev, libboost1.46-dev, libboost1.48-dev, libboost1.49-dev, libboost1.50-dev, libboost1.52-dev, libboost1.53-dev, libboost1.54-dev, libboost1.55-dev, libboost1.57-dev, libboost1.58-dev, libboost1.60-dev, libboost1.61-dev, libboost1.62-dev, libboost1.63-dev, libboost1.65-dev, libboost1.67-dev, libboost1.70-dev, libboost1.71-dev
Description: Boost C++ Libraries development files
 The Boost web site provides free, peer-reviewed, portable C++ source
 libraries. The emphasis is on libraries which work well with the C++
 Standard Library. One goal is to establish "existing practice" and
 provide reference implementations so that the Boost libraries are
 suitable for eventual standardization. Some of the libraries have
 already been proposed for inclusion in the C++ Standards Committee's
 upcoming C++ Standard Library Technical Report.
 .
 This package provides headers for all Boost libraries.
 .
 Extended precision arithmetic package libmpfrc++-dev or libntl-dev is
 required to use the Boost.Multiprecision wrapping of the respective
 library.
Homepage: https://www.boost.org/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libboost1.74-tools-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 6616
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: boost1.74
Version: 1.74.0-14ubuntu3
Replaces: bjam, boost-build, libboost1.49-dev, libboost1.53-dev, libboost1.53-tools-dev
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Suggests: xsltproc, doxygen, docbook-xml (>= 4.2), docbook-xsl (>= 1.73.2), default-jdk (>= 1.4), fop (>= 0.94)
Conflicts: bjam, boost-build, libboost1.49-dev, libboost1.53-tools-dev, libboost1.54-tools-dev, libboost1.55-tools-dev, libboost1.57-tools-dev, libboost1.58-tools-dev, libboost1.60-tools-dev, libboost1.61-tools-dev, libboost1.62-tools-dev, libboost1.63-tools-dev, libboost1.65-tools-dev, libboost1.67-tools-dev, libboost1.70-tools-dev, libboost1.71-tools-dev
Description: Boost C++ Libraries development tools
 The Boost web site provides free, peer-reviewed, portable C++ source
 libraries. The emphasis is on libraries which work well with the C++
 Standard Library. One goal is to establish "existing practice" and
 provide reference implementations so that the Boost libraries are
 suitable for eventual standardization. Some of the libraries have
 already been proposed for inclusion in the C++ Standards Committee's
 upcoming C++ Standard Library Technical Report.
 .
 This package provides the auxiliary tools bjam, Boost.Build, bcp,
 inspect, boostbook and quickbook.
Homepage: https://www.boost.org/
Original-Maintainer: Debian Boost Team <team+boost@tracker.debian.org>

Package: libbpf0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 344
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libbpf (0.5.0-1ubuntu22.04.1)
Version: 1:0.5.0-1ubuntu22.04.1
Depends: libc6 (>= 2.22), libelf1 (>= 0.142), zlib1g (>= 1:1.2.3.3)
Description: eBPF helper library (shared library)
 libbpf is a library for loading eBPF programs and reading and
 manipulating eBPF objects from user-space.
 .
 This package contains the shared library.
Original-Maintainer: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

Package: libbrotli1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 784
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: brotli
Version: 1.0.9-2build6
Depends: libc6 (>= 2.29)
Description: library implementing brotli encoder and decoder (shared libraries)
 Brotli is a generic-purpose lossless compression algorithm
 that compresses data using a combination of a modern variant
 of the LZ77 algorithm, Huffman coding and 2nd order context modeling,
 with a compression ratio comparable to the best currently available
 general-purpose compression methods. It is similar in speed with
 deflate but offers more dense compression.
 .
 This package installs shared libraries.
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>
Homepage: https://github.com/google/brotli

Package: libbsd0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.11.5-1
Depends: libc6 (>= 2.33), libmd0 (>= 1.0.3-2)
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://libbsd.freedesktop.org/

Package: libbz2-1.0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.8-5build1
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://sourceware.org/bzip2/

Package: libc-ares2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: c-ares
Version: 1.18.1-1ubuntu0.22.04.3
Replaces: libc-ares1
Depends: libc6 (>= 2.17)
Conflicts: libcares2
Description: asynchronous name resolver
 c-ares is a C library that performs DNS requests and name resolution
 asynchronously.
 .
 It is a fork of the library named "ares", with additional features:
  * IPv6 support;
  * extended cross-platform portability;
  * 64-bit clean sources.
 .
 This package provides the shared libraries.
Homepage: https://c-ares.org/
Original-Maintainer: Gregor Jasny <gjasny@googlemail.com>

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 2539
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.35-0ubuntu3.11
Depends: libc6 (>> 2.35), libc6 (<< 2.36)
Suggests: manpages
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c obsolete
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: libc-client2007e
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1399
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: uw-imap
Version: 8:2007f~dfsg-7build1
Depends: libpam-modules, mlock, libc6 (>= 2.33), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libssl3 (>= 3.0.0~~alpha1)
Suggests: uw-mailutils
Description: c-client library for mail protocols - library files
 IMAP (Internet Message Access Protocol) is a method of accessing
 electronic messages kept on a (possibly shared) mail server.
 .
 The UW (University of Washington) IMAP toolkit provides the c-client
 mail-handling library supporting various network transport methods,
 file system storage formats, and authentication and authorization
 methods.
 .
 This package contains the shared c-client library.
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>
Homepage: http://www.washington.edu/imap/

Package: libc-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.35-0ubuntu3.11
Depends: libc6 (>> 2.35), libc6 (<< 2.36)
Recommends: manpages, manpages-dev, libc-devtools (>> 2.35)
Description: GNU C Library: Development binaries
 This package contains utility programs related to the GNU C Library
 development package.
 .
  * gencat: generate message catalogs
  * rpcgen: compile RPC protocols to C
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: libc-devtools
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 352
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.35-0ubuntu3.11
Replaces: libc-dev-bin (<< 2.31-8)
Depends: libc6 (>= 2.34), libgd3 (>= 2.1.0~alpha~)
Recommends: manpages, manpages-dev
Breaks: libc-dev-bin (<< 2.31-8)
Description: GNU C Library: Development tools
 This package contains development tools shipped by the GNU C
 Library.
 .
  * memusage, memusagestat: profile a program's memory usage
  * mtrace: interpret the malloc trace log
  * sotruss: trace shared library calls
  * sprof: display shared object profiling data
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 13598
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.35-0ubuntu3.11
Replaces: libc6-amd64
Depends: libgcc-s1, libcrypt1 (>= 1:4.4.10-10ubuntu4)
Recommends: libidn2-0 (>= 2.0.5~), libnss-nis, libnss-nisplus
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: busybox (<< 1.30.1-6), fakeroot (<< 1.25.3-1.1ubuntu2~), hurd (<< 1:0.9.git20170910-1), ioquake3 (<< 1.36+u20200211.f2c61c1~dfsg-2~), iraf-fitsutil (<< 2018.07.06-4), libgegl-0.4-0 (<< 0.4.18), libtirpc1 (<< 0.2.3), locales (<< 2.35), locales-all (<< 2.35), macs (<< 2.2.7.1-3~), nocache (<< 1.1-1~), nscd (<< 2.35), openarena (<< 0.8.8+dfsg-4~), openssh-server (<< 1:8.2p1-4), r-cran-later (<< 0.7.5+dfsg-2), wcc (<< 0.0.2+dfsg-3)
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: libc6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 13039
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.35-0ubuntu3.11
Provides: libc-dev
Depends: libc6 (= 2.35-0ubuntu3.11), libc-dev-bin (= 2.35-0ubuntu3.11), linux-libc-dev, libcrypt-dev, rpcsvc-proto, libtirpc-dev, libnsl-dev
Suggests: glibc-doc, manpages-dev
Breaks: libc6-dev-amd64-cross (<< 2.35~), libgcc-10-dev (<< 10-20200321-1~), libgcc-7-dev (<< 7.5.0-6~), libgcc-8-dev (<< 8.4.0-2~), libgcc-9-dev (<< 9.3.0-5~), libperl5.26 (<< 5.26.1-3), python3.7 (<< 3.7.7-1+b1), python3.8 (<< 3.8.2-1+b1)
Conflicts: libc0.1-dev, libc0.3-dev, libc6.1-dev
Description: GNU C Library: Development Libraries and Header Files
 Contains the symlinks, headers, and object files needed to compile
 and link programs which use the standard C library.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: libcaca0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1053
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcaca
Version: 0.99.beta19-2.2ubuntu4.1
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libslang2 (>= 2.2.4), libstdc++6 (>= 4.1.1), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4)
Description: colour ASCII art library
 libcaca is the Colour AsCii Art library. It provides high level functions
 for colour text drawing, simple primitives for line, polygon and ellipse
 drawing, as well as powerful image to text conversion routines.
 .
 This package contains the shared library for libcaca.
Homepage: http://caca.zoy.org/wiki/libcaca
Original-Maintainer: Sam Hocevar <sho@debian.org>

Package: libcaf-openmpi-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: open-coarrays
Version: 2.9.2-3
Replaces: libcoarrays0d (<< 1.8.10)
Depends: libc6 (>= 2.14), libopenmpi3 (>= 4.1.0)
Breaks: libcoarrays0d (<< 1.8.10)
Description: Co-Array Fortran libraries  (OpenMPI)
 OpenCoArrays is an open-source software project that supports the
 coarray Fortran (CAF) parallel programming features of the Fortran 2008
 standard and several features proposed for Fortran 2015 in the draft
 Technical Specification [TS 18508] "Additional Parallel Features in Fortran".
 .
 This package provides the libraries necessary for Fortran to build parallel
 CAF programs built on top of OpenMPI.
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Homepage: https://www.opencoarrays.org/

Package: libcairo-gobject2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.16.0-5ubuntu2
Depends: libcairo2 (= 1.16.0-5ubuntu2), libglib2.0-0 (>= 2.14.0)
Description: Cairo 2D vector graphics library (GObject library)
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends.
 .
 This package contains the GObject library, providing wrapper GObject types
 for all cairo types.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://cairographics.org/

Package: libcairo2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1351
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.16.0-5ubuntu2
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libpixman-1-0 (>= 0.30.0), libpng16-16 (>= 1.6.2-1), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4)
Breaks: libwebkit2gtk-3.0-25 (<< 2.4.5-2~), libwebkitgtk-1.0-0 (<< 2.4.5-2~), libwebkitgtk-3.0-0 (<< 2.4.5-2~), weston (<< 1.5.0-3~)
Description: Cairo 2D vector graphics library
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends. Paths consist
 of line segments and cubic splines and can be rendered at any width
 with various join and cap styles. All colors may be specified with
 optional translucence (opacity/alpha) and combined using the
 extended Porter/Duff compositing algebra as found in the X Render
 Extension.
 .
 Cairo exports a stateful rendering API similar in spirit to the path
 construction, text, and painting operators of PostScript, (with the
 significant addition of translucence in the imaging model). When
 complete, the API is intended to support the complete imaging model of
 PDF 1.4.
 .
 This package contains the shared libraries.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://cairographics.org/

Package: libcanberra0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 130
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcanberra
Version: 0.30-10ubuntu1.22.04.1
Depends: libasound2 (>= 1.0.16), libc6 (>= 2.34), libltdl7 (>= 2.4.6), libtdb1 (>= 1.2.7+git20101214), libvorbisfile3 (>= 1.1.2), sound-theme-freedesktop
Suggests: libcanberra-gtk0, libcanberra-pulse
Description: simple abstract interface for playing event sounds
 libcanberra defines a simple abstract interface for playing event
 sounds.
 .
 libcanberra relies on the XDG sound naming specification for
 identifying event sounds. On Unix/Linux the right sound to play
 is found via the mechanisms defined in the XDG sound theming
 specification.
Homepage: http://0pointer.de/lennart/projects/libcanberra/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libcap-ng0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng
Version: 0.7.9-2.2build3
Depends: libc6 (>= 2.33)
Description: An alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains header files and libraries for libcap-ng.
Original-Maintainer: Pierre Chifflier <pollux@debian.org>
Homepage: http://people.redhat.com/sgrubb/libcap-ng

Package: libcap2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1:2.44-1ubuntu0.22.04.2
Depends: libc6 (>= 2.33)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: https://sites.google.com/site/fullycapable/
Original-Maintainer: Christian Kastner <ckk@debian.org>

Package: libcap2-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 115
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2
Version: 1:2.44-1ubuntu0.22.04.2
Replaces: libcap-bin
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.33)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: https://sites.google.com/site/fullycapable/
Original-Maintainer: Christian Kastner <ckk@debian.org>

Package: libcbor0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcbor
Version: 0.8.0-2ubuntu1
Depends: libc6 (>= 2.14)
Description: library for parsing and generating CBOR (RFC 7049)
 CBOR is a general-purpose schema-less binary data format, defined in
 RFC 7049. This package provides a C library for parsing and generating
 CBOR. The main features are:
 .
  - Complete RFC conformance
  - Robust C99 implementation
  - Layered architecture offers both control and convenience
  - Flexible memory management
  - No shared global state - threading friendly
  - Proper handling of UTF-8
  - Full support for streams & incremental processing
  - Extensive documentation and test suite
  - No runtime dependencies, small footprint
 .
 This package contains the runtime library.
Homepage: https://github.com/PJK/libcbor
Original-Maintainer: Vincent Bernat <bernat@debian.org>

Package: libcc1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.15), libgcc-s1 (>= 3.0), libstdc++6 (>= 5.2)
Description: GCC cc1 plugin for GDB
 libcc1 is a plugin for GDB.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libcdparanoia0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 135
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cdparanoia
Version: 3.10.2+debian-14build2
Depends: libc6 (>= 2.33)
Description: audio extraction tool for sampling CDs (library)
 An audio extraction tool for sampling CDs. Unlike similar programs such as
 cdda2wav, cdparanoia goes to great lengths to try to extract the audio
 information without any artifacts such as jitter.
 .
 This package contains the library of cdparanoia, so that its routines
 can be used by other programs.
Original-Maintainer: Optical Media Tools Team <pkg-opt-media-team@lists.alioth.debian.org>
Homepage: https://www.xiph.org/paranoia/

Package: libcgi-fast-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1:2.15-1
Depends: perl, libcgi-pm-perl, libfcgi-perl
Description: CGI subclass for work with FCGI
 CGI::Fast is a subclass of the CGI object created by CGI.pm. It is
 specialized to work with the FCGI module, which greatly speeds up CGI scripts
 by turning them into persistently running server processes. Scripts that
 perform time-consuming initialization processes, such as loading large
 modules or opening persistent database connections, will see large
 performance improvements.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/CGI-Fast

Package: libcgi-pm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 4.54-1
Depends: perl:any, libhtml-parser-perl
Recommends: libcgi-fast-perl
Description: module for Common Gateway Interface applications
 CGI.pm is a Perl module that provides classes useful for creating Web forms
 and for parsing their contents. It defines CGI objects, entities that contain
 the values of the current query string and other state variables.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/CGI

Package: libclamav12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 15708
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: clamav
Version: 1.4.3+dfsg-0ubuntu0.22.04.1
Replaces: libclamav12t64
Depends: libbz2-1.0, libc6 (>= 2.34), libcurl4 (>= 7.16.2), libgcc-s1 (>= 4.2), libjson-c5 (>= 0.15), libmspack0 (>= 0.4), libpcre2-8-0 (>= 10.22), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.3.4)
Suggests: libclamunrar, libclamunrar11
Breaks: libclamav12t64 (<< 1.4.3+dfsg-0ubuntu0.22.04.1)
Description: anti-virus utility for Unix - library
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 For programs written using the libclamav library. Libclamav may be used to add
 virus protection into software. The library is thread-safe, and automatically
 recognizes and scans archives. Scanning is very fast and most of the time
 not noticeable.
Homepage: https://www.clamav.net/
Original-Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>

Package: libclone-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.45-1build3
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34)
Description: module for recursively copying Perl datatypes
 The Clone module provides a clone() method which makes recursive copies of
 nested hash, array, scalar and reference types, including tied variables and
 objects.
 .
 It is faster (although less flexible) than Storable's dclone. Its
 functionality is _not_ serializing in-memory objects (i.e. as
 Data::Dumper or YAML::Dump do), but deep-copying them over to new
 in-memory structures.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Clone

Package: libcoarrays-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 117
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: open-coarrays
Version: 2.9.2-3
Depends: gfortran-10 | gfortran-mod-15, gfortran | fortran-compiler
Description: Co-Array Fortran libraries
 OpenCoArrays is an open-source software project that supports the
 coarray Fortran (CAF) parallel programming features of the Fortran 2008
 standard and several features proposed for Fortran 2015 in the draft
 Technical Specification [TS 18508] "Additional Parallel Features in Fortran".
 .
 This package contains shared development files (headers and fortran modules)
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Homepage: https://www.opencoarrays.org/

Package: libcoarrays-openmpi-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 8384
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: open-coarrays
Version: 2.9.2-3
Depends: libc6 (>= 2.14), libgfortran5 (>= 10), libopenmpi3 (>= 4.1.0), gfortran | fortran-compiler, openmpi-bin, libcaf-openmpi-3 (= 2.9.2-3), libcoarrays-dev
Description: Co-Array Fortran libraries  - development files (OpenMPI)
 OpenCoArrays is an open-source software project that supports the
 coarray Fortran (CAF) parallel programming features of the Fortran 2008
 standard and several features proposed for Fortran 2015 in the draft
 Technical Specification [TS 18508] "Additional Parallel Features in Fortran".
 .
 This package provides the libraries necessary for Fortran to build parallel
 CAF programs built on top of OpenMPI.
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Homepage: https://www.opencoarrays.org/

Package: libcolord2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 616
Maintainer: Christopher James Halse Rogers <raof@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: colord
Version: 1.4.6-1
Depends: libc6 (>= 2.29), libglib2.0-0 (>= 2.58), liblcms2-2 (>= 2.6), libudev1 (>= 196)
Suggests: colord
Description: system service to manage device colour profiles -- runtime
 colord is a system service that makes it easy to manage, install and generate
 colour profiles to accurately colour manage input and output devices.
 .
 It provides a D-Bus API for system frameworks to query, a persistent data
 store, and a mechanism for session applications to set system policy.
 .
 This package contains a gobject-based convenience library for programs to
 interact with the colord system daemon.
Homepage: http://www.freedesktop.org/software/colord/

Package: libcom-err2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.46.5-2ubuntu1.2
Replaces: libcomerr2 (<< 1.43.9-1~)
Provides: libcomerr2 (= 1.46.5-2ubuntu1.2)
Depends: libc6 (>= 2.17)
Breaks: libcomerr2 (<< 1.43.9-1~)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: libcommon-sense-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 3.75-2build1
Depends: perl (>= 5.34.0~), perlapi-5.34.0, perl (<< 5.34.1~)
Description: module that implements some sane defaults for Perl programs
 common::sense implements some sane defaults for Perl programs, as defined by
 two typical (or not so typical - use your common sense) specimens of Perl
 coders.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/common-sense

Package: libconfig-inifiles-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 122
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.000003-1
Description: read .ini-style configuration files
 Config::IniFiles provides a way to have readable configuration files
 outside your Perl script. Configurations can be imported (inherited,
 stacked,...), sections can be grouped, and settings can be accessed
 from a tied hash.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Config-IniFiles/

Package: libcrypt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 320
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.27-1
Replaces: libc6-dev (<< 2.29-4), libcrypt1-dev, libcrypt2-dev, manpages-dev (<< 5.01-1)
Provides: libcrypt1-dev
Depends: libcrypt1 (= 1:4.4.27-1)
Breaks: libc6-dev (<< 2.29-4), manpages-dev (<< 5.01-1)
Conflicts: libcrypt1-dev, libcrypt2-dev
Description: libcrypt development files
 This package contains the files needed for developing applications that
 use libcrypt.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libcrypt1
Protected: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 225
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.27-1
Replaces: libc6 (<< 2.29-4)
Depends: libc6 (>= 2.25)
Conflicts: libpam0g (<< 1.4.0-10)
Description: libcrypt shared library
 libxcrypt is a modern library for one-way hashing of passwords.
 It supports DES, MD5, NTHASH, SUNMD5, SHA-2-256, SHA-2-512, and
 bcrypt-based password hashes
 It provides the traditional Unix 'crypt' and 'crypt_r' interfaces,
 as well as a set of extended interfaces like 'crypt_gensalt'.
Original-Maintainer: Marco d'Itri <md@linux.it>
Important: yes

Package: libcryptsetup12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 572
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:2.4.3-1ubuntu1.3
Depends: libargon2-1 (>= 0~20171227), libblkid1 (>= 2.17.2), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97), libjson-c5 (>= 0.15), libssl3 (>= 3.0.0~~alpha1), libuuid1 (>= 2.16)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@alioth-lists.debian.net>

Package: libctf-nobfd0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 314
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.38-4ubuntu2.12
Replaces: libbinutils (<< 2.33.50.20191128-1~)
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0)
Breaks: libbinutils (<< 2.33.50.20191128-1~)
Description: Compact C Type Format library (runtime, no BFD dependency)
 This package includes the libctf-nobfd shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libctf0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 239
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.38-4ubuntu2.12
Depends: libbinutils (= 2.38-4ubuntu2.12), libc6 (>= 2.33), zlib1g (>= 1:1.2.0)
Description: Compact C Type Format library (runtime, BFD dependency)
 This package includes the libctf-nobfd shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libcups2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 784
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cups
Version: 2.4.1op1-1ubuntu4.16
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.34), libgnutls30 (>= 3.7.2), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.2.0)
Suggests: cups-common
Description: Common UNIX Printing System(tm) - Core library
 The Common UNIX Printing System (or CUPS(tm)) is a printing system and
 general replacement for lpd and the like.  It supports the Internet
 Printing Protocol (IPP), and has its own filtering driver model for
 handling various document types.
 .
 This package provides the base shared libraries for CUPS.
Homepage: https://github.com/OpenPrinting/cups/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>

Package: libcurl3-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 772
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.81.0-1ubuntu1.21
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libgnutls30 (>= 3.7.2), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libldap-2.5-0 (>= 2.5.4), libnettle8, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh-4 (>= 0.9.0), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: https://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: libcurl4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 788
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.81.0-1ubuntu1.21
Replaces: libcurl3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libldap-2.5-0 (>= 2.5.4), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh-4 (>= 0.9.0), libssl3 (>= 3.0.0~~alpha1), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: https://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: libcurl4-gnutls-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1635
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.81.0-1ubuntu1.21
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-gnutls-dev, libcurl4-dev
Depends: libcurl3-gnutls (= 7.81.0-1ubuntu1.21)
Suggests: libcurl4-doc, libgnutls28-dev, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-nss-dev, libcurl4-openssl-dev
Description: development files and documentation for libcurl (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by GnuTLS.
Homepage: https://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: libdatrie1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdatrie
Version: 0.2.13-2
Depends: libc6 (>= 2.14)
Description: Double-array trie library
 This package provides shared libraries needed to run programs that use the
 datrie library. It is usually automatically installed.
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Homepage: https://linux.thai.net/projects/libthai

Package: libdav1d5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1309
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dav1d
Version: 0.9.2-1
Depends: libc6 (>= 2.34)
Description: fast and small AV1 video stream decoder (shared library)
 dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed
 and correctness.
 .
 dav1d supports the following features:
  * support for all features of the AV1 bitstream
  * support for all bitdepth, 8, 10 and 12bits
  * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale
  * full acceleration for AVX-2 chips
  * full acceleration for SSSE3+ chips
  * full acceleration for ARMv8 chips
  * partial acceleration for ARMv7 chips
 .
 This package provides the shared library.
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Homepage: https://www.videolan.org/projects/dav1d.html

Package: libdb5.3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1750
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28+dfsg1-0.8ubuntu3
Depends: libc6 (>= 2.34)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html
Original-Maintainer: Debian Berkeley DB Team <team+bdb@tracker.debian.org>

Package: libdbd-mysql-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 255
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 4.050-5ubuntu0.22.04.1
Depends: perl, perl-dbdabi-94, perlapi-5.34.0, libc6 (>= 2.34), libmysqlclient21 (>= 8.0.11), libdbi-perl
Description: Perl5 database interface to the MariaDB/MySQL database
 DBD::mysql is the Perl5 Database Interface driver for the MariaDB/MySQL
 database. In other words: DBD::mysql is an interface between the Perl
 programming language and the MySQL programming API that comes with the
 MariaDB/MySQL relational database management system. Most functions provided by
 this programming API are supported. Some rarely used functions are
 missing, mainly because no one ever requested them. However supported
 features include: compression of data between server and client; timeouts;
 SSL; prepared statement support; server administration such as creating
 and dropping databases and restarting the server; auto-reconnection;
 utf8; bind type guessing; bind comment placeholders; automated insert ids;
 transactions; multiple result sets and multithreading.
Homepage: https://dbi.perl.org/
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>

Package: libdbi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2125
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.643-3build3
Provides: dh-sequence-perl-dbi, perl-dbdabi-94
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34)
Suggests: libclone-perl, libmldbm-perl, libnet-daemon-perl, libsql-statement-perl
Breaks: libdbd-anydata-perl (<< 0.11+), libdbd-csv-perl (<< 0.3600+), libsql-statement-perl (<< 1.33+)
Description: Perl Database Interface (DBI)
 DBI (DataBase Interface) is a Perl framework that provides a common interface
 to access various backend databases in a uniform manner. DBD (DataBase Driver)
 modules provide implementations for various backend data storage mechanisms
 including networked relational databases (particularly SQL databases) and even
 web services such as the Google search engine.
 .
 It is extremely portable and available for a wide range of operating systems,
 architectures and data stores, including:
 .
  * Oracle
  * Microsoft SQL Server
  * IBM DB2
  * SQLite
  * PostgreSQL
  * Firebird
  * MySQL
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://dbi.perl.org/

Package: libdbus-1-3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 457
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.12.20-2ubuntu4.1
Depends: libc6 (>= 2.34), libsystemd0
Recommends: dbus
Breaks: dbus (<< 1.9.16-1~)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libdconf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 108
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dconf
Version: 0.40.0-3ubuntu0.1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.55.2)
Description: simple configuration storage system - runtime library
 DConf is a low-level key/value database designed for storing desktop
 environment settings.
 .
 This package contains the runtime library.
Homepage: https://wiki.gnome.org/Projects/dconf
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libde265-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 788
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libde265
Version: 1.0.8-1ubuntu0.3
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: Open H.265 video codec implementation
 libde265 is an open source implementation of the H.265 video codec.
 It is written from scratch in plain C for simplicity and efficiency.
 Its simple API makes it easy to integrate it into other software.
Homepage: https://github.com/strukturag/libde265
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libdebconfclient0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.261ubuntu1
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: libdeflate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdeflate
Version: 1.10-2
Depends: libc6 (>= 2.14)
Description: fast, whole-buffer DEFLATE-based compression and decompression
 The supported formats are:
  * DEFLATE (raw)
  * zlib (a.k.a. DEFLATE with a zlib wrapper)
  * gzip (a.k.a. DEFLATE with a gzip wrapper)
 .
 libdeflate is heavily optimized. It is significantly faster than the zlib
 library, both for compression and decompression, and especially on x86
 processors. In addition, libdeflate provides optional high compression modes
 that provide a better compression ratio than the zlib's "level 9".
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Homepage: https://github.com/ebiggers/libdeflate

Package: libdevmapper-event1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.03.11-2.1ubuntu5)
Version: 2:1.02.175-2.1ubuntu5
Depends: libc6 (>= 2.33), libdevmapper1.02.1 (>= 2:1.02.97)
Description: Linux Kernel Device Mapper event support library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the userspace library to help with event monitoring
 for devmapper devices, in conjunction with the dmevent daemon.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>

Package: libdevmapper1.02.1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 493
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.03.11-2.1ubuntu5)
Version: 2:1.02.175-2.1ubuntu5
Depends: libc6 (>= 2.33), libselinux1 (>= 3.1~), libudev1 (>= 183)
Recommends: dmsetup (>= 2:1.02.175-2.1ubuntu5~)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>

Package: libdjvulibre-text
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 349
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: djvulibre
Version: 3.5.28-2ubuntu0.22.04.1
Replaces: djview3 (= 3.5.20-9), djvulibre-desktop (<< 3.5.20-9), libdjvulibre15
Description: Linguistic support files for libdjvulibre
 Runtime linguistic support files for the libdjvulibre library.
Homepage: http://djvu.sourceforge.net/
Original-Maintainer: Barak A. Pearlmutter <bap@debian.org>

Package: libdjvulibre21
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1691
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: djvulibre
Version: 3.5.28-2ubuntu0.22.04.1
Replaces: libdjvulibre1, libdjvulibre15
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libjpeg8 (>= 8c), libstdc++6 (>= 5), libdjvulibre-text (>= 3.5.28-2ubuntu0.22.04.1)
Conflicts: libdjvulibre1
Description: Runtime support for the DjVu image format
 DjVu runtime library.
Homepage: http://djvu.sourceforge.net/
Original-Maintainer: Barak A. Pearlmutter <bap@debian.org>

Package: libdns-export1110
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2262
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9-libs
Version: 1:9.11.19+dfsg-2.1ubuntu3
Depends: libc6 (>= 2.34), libisc-export1105, libssl3 (>= 3.0.0~~alpha1)
Description: Exported DNS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libdns shared library.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>

Package: libdpkg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.21.1ubuntu2.6
Depends: perl:any, dpkg (>= 1.18.11)
Recommends: libfile-fcntllock-perl, liblocale-gettext-perl, bzip2, xz-utils
Suggests: debian-keyring, gnupg, gpgv, gcc | c-compiler, binutils, patch, sensible-utils, git, bzr
Breaks: dgit (<< 3.13~), pkg-kde-tools (<< 0.15.28~)
Description: Dpkg perl modules
 This package provides the perl modules used by the scripts
 in dpkg-dev. They cover a wide range of functionality. Among them
 there are the following public modules:
 .
  - Dpkg: core variables
  - Dpkg::Arch: architecture handling functions
  - Dpkg::Build::Info: build information functions
  - Dpkg::BuildFlags: set, modify and query compilation build flags
  - Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
  - Dpkg::BuildProfiles: parse and manipulate build profiles
  - Dpkg::Changelog: parse changelogs
  - Dpkg::Changelog::Entry: represents a changelog entry
  - Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
  - Dpkg::Checksums: generate and parse checksums
  - Dpkg::Compression: simple database of available compression methods
  - Dpkg::Compression::FileHandle: transparently (de)compress files
  - Dpkg::Compression::Process: wrapper around compression tools
  - Dpkg::Conf: parse dpkg configuration files
  - Dpkg::Control: parse and manipulate Debian control information
    (.dsc, .changes, Packages/Sources entries, etc.)
  - Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
  - Dpkg::Control::Fields: manage (list of known) control fields
  - Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
  - Dpkg::Control::Info: parse files like debian/control
  - Dpkg::Control::Tests: parse files like debian/tests/control
  - Dpkg::Control::Tests::Entry: represents a debian/tests/control stanza
  - Dpkg::Deps: parse and manipulate dependencies
  - Dpkg::Deps::Simple: represents a single dependency statement
  - Dpkg::Deps::Multiple: base module to represent multiple dependencies
  - Dpkg::Deps::Union: list of unrelated dependencies
  - Dpkg::Deps::AND: list of AND dependencies
  - Dpkg::Deps::OR: list of OR dependencies
  - Dpkg::Deps::KnownFacts: list of installed and virtual packages
  - Dpkg::Exit: push, pop and run exit handlers
  - Dpkg::Gettext: wrapper around Locale::gettext
  - Dpkg::IPC: spawn sub-processes and feed/retrieve data
  - Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for
    example)
  - Dpkg::Interface::Storable: base object serializer
  - Dpkg::Path: common path handling functions
  - Dpkg::Source::Format: manipulate debian/source/format files
  - Dpkg::Source::Package: extract Debian source packages
  - Dpkg::Substvars: substitute variables in strings
  - Dpkg::Vendor: identify current distribution vendor
  - Dpkg::Version: parse and manipulate Debian package versions
 .
 All the packages listed in Suggests or Recommends are used by some of the
 modules.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>

Package: libdrm-amdgpu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libc6 (>= 2.28), libdrm2 (>= 2.4.108)
Description: Userspace interface to amdgpu-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Description: Userspace interface to kernel DRM services -- common files
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides common files for libdrm.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm-intel1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 190
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.108), libpciaccess0
Description: Userspace interface to intel-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm-nouveau2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.108)
Description: Userspace interface to nouveau-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm-radeon1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libc6 (>= 2.4), libdrm2 (>= 2.4.108)
Description: Userspace interface to radeon-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.113-2~ubuntu0.22.04.1
Depends: libdrm-common (>= 2.4.113-2~ubuntu0.22.04.1), libc6 (>= 2.33)
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdv4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 163
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libdv
Version: 1.0.0-14build1
Depends: libc6 (>= 2.14)
Suggests: libdv-bin, oss-compat
Description: software library for DV format digital video (runtime lib)
 The Quasar DV Codec (libdv) is a software decoder for DV format video, as
 defined by the IEC 61834 and SMPTE 314M standards. DV is the encoding format
 used by consumer-grade digital camcorders.
 .
 This package contains the library needed to run executables using libdv.
Homepage: http://libdv.sourceforge.net/
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: libdw1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 729
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.186-1ubuntu0.1
Depends: libbz2-1.0, libc6 (>= 2.34), libelf1 (= 0.186-1ubuntu0.1), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.2.3)
Description: library that provides access to the DWARF debug information
 libdw1 provides a library that provides access to DWARF debug information
 stored inside ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/
Original-Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>

Package: libedit2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 260
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20210910-1build1
Replaces: libedit-dev (<< 3.1-20180525-2~)
Depends: libbsd0 (>= 0.1.3), libc6 (>= 2.33), libtinfo6 (>= 6)
Description: BSD editline and history libraries
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: https://www.thrysoee.dk/editline/
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>

Package: libefiboot1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: efivar
Version: 37-6ubuntu2
Depends: libc6 (>= 2.33), libefivar1 (>= 37)
Breaks: efibootmgr (<< 0.12-2)
Description: Library to manage UEFI variables
 Library to allow for the manipulation of UEFI variables related to booting.
Original-Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Homepage: https://github.com/rhinstaller/efivar

Package: libefivar1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 171
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: efivar
Version: 37-6ubuntu2
Depends: libc6 (>= 2.34)
Breaks: efibootmgr (<< 0.12-2)
Description: Library to manage UEFI variables
 Library to allow for the simple manipulation of UEFI variables.
Original-Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Homepage: https://github.com/rhinstaller/efivar

Package: libegl-mesa0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 373
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 23.2.1-1ubuntu3.1~22.04.3
Provides: libegl-vendor
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.109), libexpat1 (>= 2.0.1), libgbm1 (= 23.2.1-1ubuntu3.1~22.04.3), libgcc-s1 (>= 3.4), libglapi-mesa (= 23.2.1-1ubuntu3.1~22.04.3), libwayland-client0 (>= 1.20.0), libwayland-server0 (>= 1.15.0), libx11-xcb1 (>= 2:1.7.5), libxcb-dri2-0 (>= 1.8), libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-randr0 (>= 1.3), libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1
Description: free implementation of the EGL API -- Mesa vendor library
 This package contains the EGL native platform graphics interface library.
 EGL provides a platform-agnostic mechanism for creating rendering surfaces
 for use with other graphics libraries, such as OpenGL|ES.
 .
 This package contains the Mesa vendor library for EGL.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libegl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.4.0-1
Depends: libc6 (>= 2.34), libglvnd0 (= 1.4.0-1), libegl-mesa0
Description: Vendor neutral GL dispatch library -- EGL support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for EGL.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libelf1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 192
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.186-1ubuntu0.1
Depends: libc6 (>= 2.33), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/
Original-Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>

Package: libenchant-2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 203
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: enchant-2
Version: 2.3.2-1ubuntu2
Depends: hunspell-en-us | hunspell-dictionary | myspell-dictionary | aspell-dictionary | ispell-dictionary, libaspell15 (>= 0.60.8), libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), libglib2.0-0 (>= 2.28.0), libhunspell-1.7-0, libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4)
Recommends: enchant-2
Suggests: libenchant-2-voikko
Description: Wrapper library for various spell checker engines (runtime libs)
 Enchant is a generic spell checking library which uses existing
 spell checker engines such as ispell, aspell and myspell as its backends.
 .
 Enchant steps in to provide uniformity and conformity on top of these
 libraries, and implement certain features that may be lacking in any
 individual provider library.
 .
 This package contains the shared library and non-Voikko enchant plugins.
Homepage: https://abiword.github.io/enchant/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libencode-locale-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.05-1.1
Depends: perl:any
Description: utility to determine the locale encoding
 In many applications it's wise to let Perl use Unicode for the strings it
 processes. Most of the interfaces Perl has to the outside world are still byte
 based. Programs therefore need to decode byte strings that enter the program
 from the outside and encode them again on the way out.
 .
 The POSIX locale system is used to specify both the language conventions
 requested by the user and the preferred character set to consume and output.
 The Encode::Locale module looks up the charset and encoding (called a CODESET
 in the locale jargon) and arranges for the Encode module to know this encoding
 under the name "locale". It means bytes obtained from the environment can be
 converted to Unicode strings by calling Encode::encode(locale => $bytes) and
 converted back again with Encode::decode(locale => $string).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Encode-Locale

Package: libepoxy0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1380
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libepoxy
Version: 1.5.10-1
Depends: libc6 (>= 2.34)
Description: OpenGL function pointer management library
 It hides the complexity of dlopen(), dlsym(), glXGetProcAddress(),
 eglGetProcAddress(), etc. from the app developer, with very little
 knowledge needed on their part.  They get to read GL specs and write
 code using undecorated function names like glCompileShader().
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://github.com/anholt/libepoxy

Package: liberror-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.17029-1
Depends: perl:any
Description: Perl module for error/exception handling in an OO-ish way
 The Error module provides two interfaces.  Firstly "Error" provides a
 procedural interface to exception handling. Secondly "Error" is a base class
 for errors/exceptions that can either be thrown, for subsequent catch, or can
 simply be recorded.
 .
 Errors in the class "Error" should not be thrown directly, but the user
 should throw errors from a sub-class of "Error".
 .
 Warning: Using the "Error" module is no longer recommended due to the
 black-magical nature of its syntactic sugar, which often tends to break. Its
 maintainers have stopped actively writing code that uses it, and discourage
 people from doing so.
 .
 Recommended alternatives are Exception::Class (libexception-class-perl),
 Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny
 (libtry-tiny-perl).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Error

Package: libestr0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libestr
Version: 0.1.10-2.1build3
Depends: libc6 (>= 2.14)
Description: Helper functions for handling strings (lib)
 The 'libestr' library contains some essential string manipulation
 functions and more, like escaping special characters.
 .
 This package contains the shared library.
Homepage: http://libestr.sourceforge.net/
Original-Maintainer: Pierre Chifflier <pollux@debian.org>

Package: libev4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libev
Version: 1:4.33-1
Depends: libc6 (>= 2.17)
Description: high-performance event loop library modelled after libevent
 libev provides a full-featured and high-performance event loop that is
 loosely modelled after libevent. It includes relative timers, absolute
 timers with customized rescheduling, synchronous signals, process status
 change events, event watchers dealing with the event loop itself, file
 watchers, and even limited support for fork events. It uses a priority
 queue to manage timers and uses arrays as fundamental data structure. It
 has no artificial limitations on the number of watchers waiting for the
 same event.
 .
 libev supports select, poll, epoll, kqueue, and inotify.
Original-Maintainer: Boyuan Yang <byang@debian.org>
Homepage: http://software.schmorp.de/pkg/libev.html

Package: libevdev2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libevdev
Version: 1.12.1+dfsg-1
Depends: libc6 (>= 2.33)
Description: wrapper library for evdev devices
 libevdev is a wrapper library for evdev devices. It provides
 functions covering the common tasks when dealing with evdev devices,
 thus avoiding erroneous ioctls and other errors.
 .
 This package contains the files required to run software using
 libevdev.
Original-Maintainer: Stephen Kitt <skitt@debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/libevdev/

Package: libevent-2.1-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 389
Maintainer: Balint Reczey <rbalint@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-1build3
Depends: libc6 (>= 2.33)
Description: Asynchronous event notification library
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 For backward compatibility and to transition to "libevent_core only"
 or "libevent_core + libevent_extra", the libevent source package builds
 the libevent library that includes everything in libevent_core and
 libevent_extra.
Homepage: https://libevent.org/

Package: libevent-core-2.1-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 256
Maintainer: Balint Reczey <rbalint@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-1build3
Depends: libc6 (>= 2.33)
Description: Asynchronous event notification library (core)
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 The libevent_core library includes event loops, timers, buffer code,
 and various small compatibility functions.
 .
 If you're writing software that only uses libevent's event loop, you
 should link against only the libevent_core library.
Homepage: https://libevent.org/

Package: libevent-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1710
Maintainer: Balint Reczey <rbalint@ubuntu.com>
Architecture: amd64
Source: libevent
Version: 2.1.12-stable-1build3
Depends: libevent-2.1-7 (= 2.1.12-stable-1build3), libevent-core-2.1-7 (= 2.1.12-stable-1build3), libevent-extra-2.1-7 (= 2.1.12-stable-1build3), libevent-pthreads-2.1-7 (= 2.1.12-stable-1build3), libevent-openssl-2.1-7 (= 2.1.12-stable-1build3)
Description: Asynchronous event notification library (development files)
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 This package includes development files for compiling against libevent.
Homepage: https://libevent.org/

Package: libevent-extra-2.1-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 184
Maintainer: Balint Reczey <rbalint@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-1build3
Depends: libc6 (>= 2.14), libevent-core-2.1-7 (= 2.1.12-stable-1build3)
Description: Asynchronous event notification library (extra)
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 The libevent_extra library includes code for HTTP, DNS, RPC, and so
 on.
 .
 If you're writing software that uses libevent's protocol support, you
 need to link libevent_core and libevent_extra as well.
Homepage: https://libevent.org/

Package: libevent-openssl-2.1-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Balint Reczey <rbalint@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-1build3
Depends: libc6 (>= 2.4), libevent-core-2.1-7 (= 2.1.12-stable-1build3), libssl3 (>= 3.0.0~~alpha1)
Description: Asynchronous event notification library (openssl)
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 There is now a bufferevent type that supports SSL/TLS using the
 OpenSSL library.  The code for this is build in a separate
 library, libevent_openssl, so that your programs don't need to
 link against OpenSSL unless they actually want SSL support.
Homepage: https://libevent.org/

Package: libevent-pthreads-2.1-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Balint Reczey <rbalint@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-1build3
Depends: libc6 (>= 2.34), libevent-core-2.1-7 (= 2.1.12-stable-1build3)
Description: Asynchronous event notification library (pthreads)
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 If you want threading support and you're using pthreads, you'll need
 to link against the libevent_pthreads library in addition to
 libevent_core.
Homepage: https://libevent.org/

Package: libexpat1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.4.7-1ubuntu0.6
Depends: libc6 (>= 2.25)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: https://libexpat.github.io/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libexpat1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 949
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.4.7-1ubuntu0.6
Provides: libexpat-dev
Depends: libexpat1 (= 2.4.7-1ubuntu0.6), libc6-dev | libc-dev
Conflicts: libexpat-dev
Description: XML parsing C library - development kit
 This package contains the header file and development libraries of
 expat, the C library for parsing XML.  Expat is a stream oriented XML
 parser.  This means that you register handlers with the parser prior
 to starting the parse.  These handlers are called when the parser
 discovers the associated structures in the document being parsed.  A
 start tag is an example of the kind of structures for which you may
 register handlers.
Homepage: https://libexpat.github.io/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libext2fs2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 574
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.46.5-2ubuntu1.2
Replaces: e2fslibs (<< 1.43.9-1~)
Provides: e2fslibs (= 1.46.5-2ubuntu1.2)
Depends: libc6 (>= 2.34)
Breaks: e2fslibs (<< 1.43.9-1~)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: libfabric1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1406
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libfabric
Version: 1.11.0-3
Replaces: libfabric-dev (<< 1.6.1-4)
Depends: ibverbs-providers (>= 26), libc6 (>= 2.34), libibverbs1 (>= 24), libpsm-infinipath1 (>= 3.3+7.gec1d6d2), libpsm2-2 (>= 11.2.68), librdmacm1 (>= 23)
Breaks: libfabric-dev (<< 1.6.1-4)
Description: libfabric communication library
 Libfabric is a communication library that exports interfaces for
 fabric services to applications.  Libfabric is the core component
 of the Open Fabrics Interfaces (OFI) framework.
 .
 This package contains the shared libraries.
Original-Maintainer: Debian HPC Team <debian-hpc@lists.debian.org>
Homepage: https://ofiwg.github.io/libfabric/

Package: libfakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fakeroot
Version: 1.28-1ubuntu1
Replaces: fakeroot (<< 1.20-2~)
Depends: libc6 (>= 2.34)
Breaks: fakeroot (<< 1.20-2~)
Conffiles:
 /etc/ld.so.conf.d/fakeroot-x86_64-linux-gnu.conf f9f2331782e9078d5472c77e1d9cd869
Description: tool for simulating superuser privileges - shared libraries
 fakeroot provides a fake "root environment" by means of LD_PRELOAD and
 SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
 stat(), and other file-manipulation functions, so that unprivileged
 users can (for instance) populate .deb archives with root-owned files;
 various build tools use fakeroot for this by default.
 .
 This package contains the LD_PRELOAD libraries.
Original-Maintainer: Clint Adams <clint@debian.org>

Package: libfastjson4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libfastjson
Version: 0.99.9-1build2
Depends: libc6 (>= 2.14)
Description: fast json library for C
 The libfastjson library is a fork from json-c with a focus on performance.
 .
 This package contains the shared library.
Homepage: https://github.com/rsyslog/libfastjson
Original-Maintainer: Michael Biebl <biebl@debian.org>

Package: libfcgi-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libfcgi
Version: 2.4.2-2ubuntu0.1
Replaces: libfcgi0ldbl (<< 2.4.0-8.4)
Depends: libc6 (>= 2.34), libfcgi0ldbl (>= 2.4.2)
Breaks: libfcgi0ldbl (<< 2.4.0-8.4)
Description: FastCGI bridge from CGI
 FastCGI is a language independent, scalable, open extension
 to CGI that provides high performance without the limitations
 of server specific APIs.
 .
 This package contains the cgi-fcgi utility to bridge between CGI
 and FastCGI.
Homepage: https://github.com/FastCGI-Archives
Original-Maintainer: Boris Pek <tehnick@debian.org>

Package: libfcgi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 0.82+ds-1build1
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34), libfcgi0ldbl (>= 2.4.2)
Description: helper module for FastCGI
 FCGI is a simple Perl module for writing FastCGI applications. FastCGI is a
 language-independent, scalable, open extension to CGI that provides faster
 performance by keeping programs persistent in memory and allowing them to
 handle multiple requests. This module provides the core interface needed to
 write these applications.
 .
 For complex applications, you should consider a more full-featured solution
 such as Plack or Catalyst (see libcatalyst-perl).
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/FCGI

Package: libfcgi0ldbl
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libfcgi
Version: 2.4.2-2ubuntu0.1
Replaces: libfcgi0, libfcgi0c2
Provides: libfcgi
Depends: libc6 (>= 2.15), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5)
Recommends: libfcgi-bin (= 2.4.2-2ubuntu0.1)
Conflicts: libfcgi0, libfcgi0c2
Description: shared library of FastCGI
 FastCGI is a language independent, scalable, open extension
 to CGI that provides high performance without the limitations
 of server specific APIs.
 .
 This package contains the shared libraries.
Homepage: https://github.com/FastCGI-Archives
Original-Maintainer: Boris Pek <tehnick@debian.org>

Package: libfdisk1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.33), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: libffi-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.4.2-4
Depends: libffi8 (= 3.4.2-4)
Conflicts: libffi4-dev
Description: Foreign Function Interface library (development files)
 This package contains the headers and static library files necessary for
 building programs which use libffi.
 .
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Homepage: https://sourceware.org/libffi/

Package: libffi7
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 66
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 3.3-5ubuntu1
Depends: libc6 (>= 2.14)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Homepage: https://sourceware.org/libffi/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libffi8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.4.2-4
Replaces: libffi8ubuntu1 (<< 3.4.2-1)
Provides: libffi8ubuntu1 (= 3.4.2-4)
Depends: libc6 (>= 2.27)
Breaks: libffi8ubuntu1 (<< 3.4.2-1)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Homepage: https://sourceware.org/libffi/

Package: libfftw3-double3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2254
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.8-2ubuntu8
Replaces: libfftw3-3 (<< 3.3.3-1)
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Breaks: libfftw3-3 (<< 3.3.3-1)
Description: Library for computing Fast Fourier Transforms - Double precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for double precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: http://fftw.org
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>

Package: libfido2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libfido2
Version: 1.10.0-1
Depends: libc6 (>= 2.33), libcbor0.8 (>= 0.5.0), libssl3 (>= 3.0.0~~alpha1), libudev1 (>= 183), zlib1g (>= 1:1.2.0)
Description: library for generating and verifying FIDO 2.0 objects
 A library for communicating with a FIDO device over USB, and for verifying
 attestation and assertion signatures. FIDO U2F (CTAP 1) and FIDO 2.0 (CTAP 2)
 are supported.
 .
 This package contains the library.
Original-Maintainer: Debian Authentication Maintainers <pkg-auth-maintainers@lists.alioth.debian.org>
Homepage: https://developers.yubico.com/libfido2/

Package: libfile-fcntllock-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.22-3build7
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34)
Suggests: gcc | c-compiler
Description: Perl module for file locking with fcntl(2)
 File::FcntlLock is a Perl module to do file locking in an object oriented
 fashion using the fcntl(2) system call. This allows locks on parts of a file
 as well as on the whole file and overcomes some known problems with flock(2),
 on which Perl's flock() function is based.
 .
 Furthermore due to its design it supports reliable locking over NFS.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-FcntlLock

Package: libflac8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 282
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: flac
Version: 1.3.3-2ubuntu0.2
Depends: libc6 (>= 2.33), libogg0 (>= 1.0rc3)
Description: Free Lossless Audio Codec - runtime C library
 FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC is
 similar to MP3, but lossless.  The FLAC project consists of:
 .
  * The stream format
  * libFLAC, which implements a reference encoder, stream decoder, and file
    decoder
  * flac, which is a command-line wrapper around libFLAC to encode and decode
    .flac files
  * Input plugins for various music players (Winamp, XMMS, and more in the
    works)
 .
 This package contains the runtime library libFLAC.
Homepage: https://xiph.org/flac/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libfontconfig1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 331
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fontconfig
Version: 2.13.1-4.2ubuntu5
Provides: libfontconfig
Depends: libc6 (>= 2.33), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.9.1), libuuid1 (>= 2.16), fontconfig-config (>= 2.13.1-4.2ubuntu5)
Breaks: xpdf (<= 3.03-11)
Description: generic font configuration library - runtime
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the runtime library needed to launch applications
 using fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>

Package: libfontenc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libfontenc
Version: 1:1.1.4-1build3
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: X11 font encoding library
 libfontenc is a library which helps font libraries portably determine
 and deal with different encodings of fonts.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libfontenc
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 870
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.11.1+dfsg-1ubuntu0.3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.33), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on providing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
Homepage: https://www.freetype.org
Original-Maintainer: Hugh McMaster <hugh.mcmaster@outlook.com>

Package: libfribidi0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fribidi
Version: 1.0.8-2ubuntu3.1
Depends: libc6 (>= 2.4)
Description: Free Implementation of the Unicode BiDi algorithm
 FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic
 languages.
 This package contains the shared libraries.
Homepage: http://www.fribidi.org/
Original-Maintainer: Debian Hebrew Packaging Team <team+hebrew@tracker.debian.org>

Package: libfuse2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 322
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fuse
Version: 2.9.9-5ubuntu3
Depends: libc6 (>= 2.34)
Suggests: fuse
Conflicts: fuse (<< 2.9.9-5ubuntu3)
Description: Filesystem in Userspace (library)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libfuse3-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 282
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fuse3
Version: 3.10.5-1build1
Depends: libc6 (>= 2.34)
Suggests: fuse3
Description: Filesystem in Userspace (library) (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://github.com/libfuse/libfuse/wiki

Package: libgamin0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gamin
Version: 0.1.10-6
Replaces: libfam0, libfam0c102
Provides: libfam0, libfam0c102
Depends: libc6 (>= 2.15), gamin
Conflicts: libfam0, libfam0c102
Description: Client library for the gamin file and directory monitoring system
 Gamin is a file and directory monitoring system defined to be a
 subset of the FAM (File Alteration Monitor) system.
 .
 This package contains the client library for the gamin file and directory
 monitoring system.
Original-Maintainer: Michael Banck <mbanck@debian.org>

Package: libgav1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 880
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgav1
Version: 0.17.0-1build1
Depends: libabsl20210324 (>= 0~20210324.2-1), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: AV1 decoder developed by Google -- runtime library
 This package contains the runtime, shared library of gav1. Gav1 is
 a new decoder implementation for AV1 video encoding format (supporting
 profiles 0 and 1).
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Homepage: https://chromium.googlesource.com/codecs/libgav1/

Package: libgbm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 23.2.1-1ubuntu3.1~22.04.3
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libwayland-server0 (>= 1.15.0), libxcb-randr0
Description: generic buffer management API -- runtime
 This package contains the GBM buffer management library.  It provides a
 mechanism for allocating buffers for graphics rendering tied to Mesa.
 .
 GBM is intended to be used as a native platform for EGL on drm or openwfd.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libgcc-11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 13895
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04.2
Replaces: libtsan0 (<< 11.2.0-11)
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04.2), libgcc-s1 (>= 11.4.0-1ubuntu1~22.04.2), libgomp1 (>= 11.4.0-1ubuntu1~22.04.2), libitm1 (>= 11.4.0-1ubuntu1~22.04.2), libatomic1 (>= 11.4.0-1ubuntu1~22.04.2), libasan6 (>= 11.4.0-1ubuntu1~22.04.2), liblsan0 (>= 11.4.0-1ubuntu1~22.04.2), libtsan0 (>= 11.4.0-1ubuntu1~22.04.2), libubsan1 (>= 11.4.0-1ubuntu1~22.04.2), libquadmath0 (>= 11.4.0-1ubuntu1~22.04.2)
Recommends: libc6-dev (>= 2.13-0ubuntu6)
Breaks: libtsan0 (<< 11.2.0-11)
Description: GCC support library (development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libgcc-s1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 140
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Replaces: libgcc1 (<< 1:10)
Provides: libgcc1 (= 1:12.3.0-1ubuntu1~22.04.2)
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.35)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libgcrypt20
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1354
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.9.4-3ubuntu3
Depends: libc6 (>= 2.33), libgpg-error0 (>= 1.27)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, SM4, Blake-2, CRC, MD2, MD4, MD5,
 RIPE-MD160, SM3, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384,
 SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC
 (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: https://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libgcrypt20-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2175
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libgcrypt20
Version: 1.9.4-3ubuntu3
Provides: libgcrypt-dev
Depends: libc6-dev | libc-dev, libgcrypt20 (= 1.9.4-3ubuntu3), libgpg-error-dev
Suggests: libgcrypt20-doc
Conflicts: libgcrypt-dev
Description: LGPL Crypto library - development files
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, SM4, Blake-2, CRC, MD2, MD4, MD5,
 RIPE-MD160, SM3, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384,
 SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC
 (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
 .
 This package contains header files and libraries for static linking.
Homepage: https://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libgd3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 461
Maintainer: GD Team <team+gd@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgd2
Version: 2.3.3-13+ubuntu22.04.1+deb.sury.org+1
Depends: libavif13 (>= 0.9.3), libc6 (>= 2.29), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libheif1 (>= 1.3.2), libimagequant0 (>= 2.11.10), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libwebp7, libxpm4
Suggests: libgd-tools
Description: GD Graphics Library
 GD is a graphics library. It allows your code to quickly draw images
 complete with lines, arcs, text, multiple colours, cut and paste from
 other images, flood fills, and write out the result as a PNG file.
 This is particularly useful in World Wide Web applications, where PNG is
 one of the formats accepted for inline images by most browsers.
 .
 This is the runtime package of the library.
Homepage: http://www.libgd.org/

Package: libgdbm-compat4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.23-1
Depends: libc6 (>= 2.33), libgdbm6 (>= 1.16)
Description: GNU dbm database routines (legacy support runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
 This package includes library files, required to run old programs,
 that use legacy 'dbm' interface. For new programs, please use modern
 interface, provided by libgdbm6 and libgdbm-dev.
Original-Maintainer: Nicolas Mora <babelouest@debian.org>
Homepage: https://gnu.org/software/gdbm

Package: libgdbm6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.23-1
Depends: libc6 (>= 2.33)
Suggests: gdbm-l10n (= 1.23-1)
Description: GNU dbm database routines (runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Original-Maintainer: Nicolas Mora <babelouest@debian.org>
Homepage: https://gnu.org/software/gdbm

Package: libgdk-pixbuf-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 516
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdk-pixbuf
Version: 2.42.8+dfsg-1ubuntu0.4
Replaces: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~)
Depends: libgdk-pixbuf2.0-common (>= 2.42.8+dfsg-1ubuntu0.4), shared-mime-info, libc6 (>= 2.34), libglib2.0-0 (>= 2.59.0), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3)
Recommends: libgdk-pixbuf2.0-bin
Breaks: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~)
Description: GDK Pixbuf library
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libgdk-pixbuf2.0-bin
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.8+dfsg-1ubuntu0.4
Replaces: libgdk-pixbuf2.0-dev (<< 2.36.12-2~)
Depends: libc6 (>= 2.34), libgdk-pixbuf-2.0-0 (>= 2.35.4), libglib2.0-0 (>= 2.56.0)
Breaks: libgdk-pixbuf2.0-dev (<< 2.36.12-2~)
Description: GDK Pixbuf library (thumbnailer)
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
 .
 This package contains the GDK pixdata compression utility, the thumbnailer
 and a utility for converting images into C code.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libgdk-pixbuf2.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.8+dfsg-1ubuntu0.4
Description: GDK Pixbuf library - data files
 This package contains the common files and translations for the GDK
 Pixbuf library.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libgfortran-11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 5038
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04.2
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04.2), libgcc-11-dev (= 11.4.0-1ubuntu1~22.04.2), libgfortran5 (>= 11.4.0-1ubuntu1~22.04.2)
Description: Runtime library for GNU Fortran applications (development files)
 This package contains the headers and static library files needed to build
 GNU Fortran applications.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libgfortran5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2987
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.34), libgcc-s1 (>= 4.3), libquadmath0 (>= 4.6)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: Runtime library for GNU Fortran applications
 Library needed for GNU Fortran applications linked against the
 shared library.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libgif7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: giflib
Version: 5.1.9-2ubuntu0.1
Depends: libc6 (>= 2.14)
Description: library for GIF images (library)
 GIFLIB is a package of portable tools and library routines for working with GIF
 images.
 .
 This package contains the library.
Homepage: http://giflib.sourceforge.net/
Original-Maintainer: David Suárez <david.sephirot@gmail.com>

Package: libgirepository-1.0-1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 175
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.72.0-1
Provides: libgirepository-1.0-1-with-libffi8 (= 1.72.0-1)
Depends: libglib2.0-0 (>= 2.70.0), libc6 (>= 2.29), libffi8 (>= 3.4)
Breaks: libcjs0 (<< 4.8.2-1+b1), libgjs0g (<< 1.68.4-1+b1), libglib-object-introspection-perl (<< 0.049-1+b2), python-gi (<< 3.42.0-1+b1), python3-gi (<< 3.42.0-1+b1), ruby-gobject-introspection (<< 3.4.3-1+b2)
Description: Library for handling GObject introspection data (runtime library)
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 GObject Introspection contains tools to generate and handle the
 introspection data.
 .
 This package contains a C library for handling the introspection data.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: libgl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 653
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.4.0-1
Depends: libc6 (>= 2.14), libglvnd0 (= 1.4.0-1), libglx0 (= 1.4.0-1)
Description: Vendor neutral GL dispatch library -- legacy GL support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for old libGL for compatibility reasons.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libgl1-amber-dri
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 15592
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa-amber
Version: 21.3.9-0ubuntu1~22.04.1
Replaces: libgl1-mesa-dri (<< 22.0.0~)
Provides: dri-drivers
Depends: libc6 (>= 2.34), libdrm-nouveau2 (>= 2.4.66), libdrm-radeon1 (>= 2.4.17), libdrm2 (>= 2.4.38), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libglapi-mesa (>= 23.0.4), libstdc++6 (>= 5.2), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Conflicts: libgl1-mesa-dri (<< 22.0.0~)
Description: free implementation of the OpenGL API -- Amber DRI modules
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the OpenGL library itself, only the DRI
 modules for accelerating direct rendering.
 .
 For a complete description of Mesa Amber, please look at the
 libglx-amber0 package.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://mesa3d.org/

Package: libgl1-mesa-dri
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31988
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 23.2.1-1ubuntu3.1~22.04.3
Replaces: libgl1-amber-dri (<< 21.3.9)
Depends: libc6 (>= 2.34), libdrm-amdgpu1 (>= 2.4.110), libdrm-intel1 (>= 2.4.38), libdrm-nouveau2 (>= 2.4.66), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.75), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libglapi-mesa (= 23.2.1-1ubuntu3.1~22.04.3), libllvm15, libsensors5 (>= 1:3.5.0), libstdc++6 (>= 11), libxcb-dri3-0 (>= 1.13), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Recommends: libgl1-amber-dri
Breaks: libgl1-amber-dri (<< 21.3.9)
Description: free implementation of the OpenGL API -- DRI modules
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the OpenGL library itself, only the DRI
 modules for accelerating direct rendering.
 .
 For a complete description of Mesa, please look at the
 libglx-mesa0 package.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libglapi-mesa
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 289
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 23.2.1-1ubuntu3.1~22.04.3
Depends: libc6 (>= 2.34)
Description: free implementation of the GL API -- shared library
 The Mesa GL API module is responsible for dispatching all the gl*
 functions. It is intended to be mainly used by both the libgles1-mesa
 and libgles2-mesa packages.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libgles2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.4.0-1
Depends: libc6 (>= 2.14), libglvnd0 (= 1.4.0-1)
Description: Vendor neutral GL dispatch library -- GLESv2 support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for GLESv2.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libglib2.0-0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 4090
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.72.4-0ubuntu2.7
Depends: libc6 (>= 2.34), libffi8 (>= 3.4), libmount1 (>= 2.35.2-7~), libpcre3, libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Breaks: gimp (<< 2.10.14-3~), glib-networking-tests (<< 2.70.0~), gnome-keyring (<< 40.0-3~), gnome-shell (<< 42.9-0ubuntu2.1~), libgirepository-1.0-1 (<< 1.62.0-4~), libgladeui-2-6 (<< 3.22.2), libsoup2.4-tests (<< 2.72.0-3~)
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libglib2.0-bin
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 342
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glib2.0
Version: 2.72.4-0ubuntu2.7
Depends: libglib2.0-data, libc6 (>= 2.34), libelf1 (>= 0.142), libglib2.0-0 (= 2.72.4-0ubuntu2.7)
Description: Programs for the GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the program files which is used for the libraries
 and others.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libglib2.0-data
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: glib2.0
Version: 2.72.4-0ubuntu2.7
Description: Common files for GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed for the runtime libraries to display messages in
 languages other than English.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libglvnd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 725
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.4.0-1
Replaces: libgldispatch0-nvidia
Depends: libc6 (>= 2.34)
Breaks: libgldispatch0-nvidia
Description: Vendor neutral GL dispatch library
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains the GL dispatch library.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libglx-mesa0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 567
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 23.2.1-1ubuntu3.1~22.04.3
Provides: libglx-vendor
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libglapi-mesa (= 23.2.1-1ubuntu3.1~22.04.3), libx11-6 (>= 2:1.4.99.1), libx11-xcb1 (>= 2:1.7.5), libxcb-dri2-0 (>= 1.8), libxcb-dri3-0 (>= 1.13), libxcb-glx0 (>= 1.8), libxcb-present0, libxcb-randr0, libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxext6, libxfixes3, libxshmfence1, libxxf86vm1, libgl1-mesa-dri
Breaks: glx-diversions (<< 0.8.4~), libopengl-perl (<< 0.6704+dfsg-2)
Description: free implementation of the OpenGL API -- GLX vendor library
 Mesa is a 3-D graphics library with an API which is very similar to
 that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
 syntax or state machine, it is being used with authorization from
 Silicon Graphics, Inc.  However, the authors make no claim that Mesa
 is in any way a compatible replacement for OpenGL or associated with
 Silicon Graphics, Inc.
 .
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the modules themselves: these can be found
 in the libgl1-mesa-dri package.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libglx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 163
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.4.0-1
Depends: libc6 (>= 2.34), libglvnd0 (= 1.4.0-1), libx11-6 (>= 2:1.4.99.1), libglx-mesa0
Description: Vendor neutral GL dispatch library -- GLX support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for GLX.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libgmp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1600
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.2.1+dfsg-3ubuntu1
Replaces: libgmp10-dev, libgmp3-dev
Provides: libgmp10-dev
Depends: libgmp10 (= 2:6.2.1+dfsg-3ubuntu1), libgmpxx4ldbl (= 2:6.2.1+dfsg-3ubuntu1)
Suggests: gmp-doc, libgmp10-doc, libmpfr-dev
Conflicts: libgmp10-dev
Description: Multiprecision arithmetic library developers tools
 This development package provides the header files and the symbolic
 links to allow compilation and linking of programs that use the libraries
 provided in the libgmp10 package.
 .
 Both C and C++ bindings are present in this package.  Package
 libstdc++-dev is required to use the C++ bindings.
 .
 The MPFR library (multiple-precision floating-point) used to be
 included, but has since been moved to package libmpfr-dev.
Homepage: https://gmplib.org/
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>

Package: libgmp10
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 544
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.2.1+dfsg-3ubuntu1
Depends: libc6 (>= 2.14)
Breaks: libmath-gmp-perl (<< 2.20-1), libmath-prime-util-gmp-perl (<< 0.51-2), postgresql-pgmp (<< 1.0.3-1)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: https://gmplib.org/
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>

Package: libgmpxx4ldbl
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.2.1+dfsg-3ubuntu1
Replaces: libgmp3
Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.3.1), libgmp10 (>= 2:6.2.1+dfsg), libstdc++6 (>= 5.2)
Conflicts: libgmp3, libgmpxx4
Description: Multiprecision arithmetic library (C++ bindings)
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
Homepage: https://gmplib.org/
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>

Package: libgnutls-dane0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.7.3-4ubuntu1.7
Depends: libgnutls30 (= 3.7.3-4ubuntu1.7), libc6 (>= 2.34), libunbound8 (>= 1.8.0)
Suggests: dns-root-data
Description: GNU TLS library - DANE security support
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the runtime library for DANE (DNS-based Authentication
 of Named Entities) support.
Homepage: https://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libgnutls-openssl27
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 129
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.7.3-4ubuntu1.7
Depends: libgnutls30 (= 3.7.3-4ubuntu1.7), libc6 (>= 2.34)
Description: GNU TLS library - OpenSSL wrapper
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the runtime library of the GnuTLS OpenSSL wrapper.
Homepage: https://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libgnutls28-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 4691
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.7.3-4ubuntu1.7
Replaces: gnutls-dev
Provides: gnutls-dev, libgnutls-openssl-dev
Depends: libc6-dev | libc-dev, libgnutls-dane0 (= 3.7.3-4ubuntu1.7), libgnutls-openssl27 (= 3.7.3-4ubuntu1.7), libgnutls30 (= 3.7.3-4ubuntu1.7), libgnutlsxx28 (= 3.7.3-4ubuntu1.7), libidn2-dev, libp11-kit-dev (>= 0.23.10), libtasn1-6-dev, nettle-dev (>= 3.6)
Suggests: gnutls-bin, gnutls-doc
Conflicts: gnutls-dev
Description: GNU TLS library - development files
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the GnuTLS development files.
Homepage: https://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libgnutls30
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2284
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.7.3-4ubuntu1.7
Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg), libhogweed6 (>= 3.6), libidn2-0 (>= 2.0.0), libnettle8 (>= 3.7~), libp11-kit0 (>= 0.23.18.1), libtasn1-6 (>= 4.14), libunistring2 (>= 0.9.7)
Suggests: gnutls-bin
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the main runtime library.
Homepage: https://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libgnutlsxx28
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.7.3-4ubuntu1.7
Depends: libgnutls30 (= 3.7.3-4ubuntu1.7), libc6 (>= 2.4), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5)
Description: GNU TLS library - C++ runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the C++ runtime libraries.
Homepage: https://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libgomp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 320
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.34)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC OpenMP (GOMP) support library
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libgpg-error-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 525
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libgpg-error
Version: 1.43-3
Depends: libgpg-error0 (= 1.43-3)
Description: GnuPG development runtime library (developer tools)
 Library that defines common error values, messages, and common
 runtime functionality for all GnuPG components.  Among these are GPG,
 GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and
 possibly more in the future.
 .
 It will likely be renamed "gpgrt" in the future.
 .
 This package contains the headers and other files needed to compile
 against this library.
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: libgpg-error0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 189
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.43-3
Depends: libc6 (>= 2.34)
Recommends: libgpg-error-l10n
Description: GnuPG development runtime library
 Library that defines common error values, messages, and common
 runtime functionality for all GnuPG components.  Among these are GPG,
 GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and
 possibly more in the future.
 .
 It will likely be renamed "gpgrt" in the future.
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: libgpgme-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1097
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: gpgme1.0
Version: 1.16.0-1.2ubuntu4.2
Replaces: libgpgme11-dev
Provides: libgpgme11-dev (= 1.16.0-1.2ubuntu4.2)
Depends: libassuan-dev, libc6-dev, libgpg-error-dev, libgpgme11 (= 1.16.0-1.2ubuntu4.2), libassuan0 (>= 2.4.2), libc6 (>= 2.34), libgpg-error0 (>= 1.36)
Breaks: libgpgme11-dev
Description: GPGME - GnuPG Made Easy (development files)
 GPGME is a wrapper library which provides a C API to access some of the
 GnuPG functions, such as encrypt, decrypt, sign, verify, ...
 .
 This package contains the headers and other files needed to compile
 against this library.
Homepage: https://www.gnupg.org/related_software/gpgme/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: libgpgme11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 372
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gpgme1.0
Version: 1.16.0-1.2ubuntu4.2
Depends: gnupg (>= 2.1.21-4) | gpg, libassuan0 (>= 2.4.2), libc6 (>= 2.34), libgpg-error0 (>= 1.36)
Recommends: dirmngr, gpg-agent, gpg-wks-client, gpgsm
Description: GPGME - GnuPG Made Easy (library)
 GPGME is a wrapper library which provides a C API to access some of the
 GnuPG functions, such as encrypt, decrypt, sign, verify, ...
 .
 This package contains the library.
Homepage: https://www.gnupg.org/related_software/gpgme/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: libgpm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gpm
Version: 1.20.7-10build1
Depends: libc6 (>= 2.33)
Suggests: gpm
Description: General Purpose Mouse - shared library
 This package provides a library that handles mouse requests
 and delivers them to applications. See the description for the 'gpm'
 package for more information.
Original-Maintainer: Axel Beckert <abe@debian.org>
Homepage: https://nico.schottelius.org/software/gpm/

Package: libgraphene-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 151
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: graphene
Version: 1.10.8-1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.14.0)
Description: library of graphic data types
 Graphene provides a small set of mathematical types needed to implement
 graphic libraries that deal with 2D and 3D transformations and projections.
 .
 This library provides types and their relative API; it does not deal with
 windowing system surfaces, drawing, scene graphs, or input.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://ebassi.github.io/graphene/

Package: libgraphite2-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 179
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: graphite2
Version: 1.3.14-1build2
Replaces: libgraphite2-2.0.0
Provides: libgraphite2-2.0.0
Depends: libc6 (>= 2.14)
Breaks: libgraphite2-2.0.0 (<< 1.2.0)
Description: Font rendering engine for Complex Scripts -- library
 Graphite is a system that can be used to create and use "smart fonts" capable
 of displaying writing systems with various complex behaviors, such as:
 contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
 stacking diacritics and complex positioning.
 .
 This library was designed and developed by the NRSI (Non-Roman Script
 Initiative) within SIL International (www.sil.org) to act as a complement to
 other smart font rendering technologies with limited practical local
 extensibility. Its purpose is to help meet the needs of a very large number
 of "minority language" communities for local extensibility of complex script
 behaviors.
 .
 The behavior of the rendering engine for a given writing system is specified
 through extra tables added to a TrueType font.  These tables are generated by
 compiling a GDL (Graphite Description Language) source file into a font using
 grcompiler.
 .
 This package contains the shared library.
Original-Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Homepage: http://graphite.sil.org/

Package: libgs9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 25064
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ghostscript
Version: 9.55.0~dfsg1-0ubuntu5.13
Depends: libgs9-common (= 9.55.0~dfsg1-0ubuntu5.13), poppler-data, libc6 (>= 2.34), libcups2 (>= 2.3~b6), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libgcc-s1 (>= 3.3.1), libidn12 (>= 1.13), libijs-0.35 (>= 0.35), libjbig2dec0 (>= 0.16+20190905), libjpeg8 (>= 8c), libopenjp2-7 (>= 2.0.0), libpaper1, libpng16-16 (>= 1.6.2-1), libstdc++6 (>= 11), libtiff5 (>= 4.0.3), zlib1g (>= 1:1.2.0)
Description: interpreter for the PostScript language and for PDF - Library
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview, it can display
 PostScript and PDF documents in an X11 environment.
 .
 This package provides the Ghostscript library which makes the
 facilities of GPL Ghostscript available to applications.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>

Package: libgs9-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3097
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ghostscript
Version: 9.55.0~dfsg1-0ubuntu5.13
Depends: fonts-urw-base35 (>= 20200910)
Recommends: fonts-droid-fallback
Description: interpreter for the PostScript language and for PDF - common files
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview, it can display
 PostScript and PDF documents in an X11 environment.
 .
 This package provides common architecture-independent files needed by
 the GPL Ghostscript library.
 .
 By default, GPL Ghostscript uses a font from the fonts-droid package to
 approximate glyphs in PDFs for which the requested CJK TrueType font
 is missing.  If the fonts-droid package is not installed, these glyphs
 will be rendered as bullets.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>

Package: libgssapi-krb5-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 456
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Depends: libc6 (>= 2.33), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.16), libkrb5-3 (= 1.19.2-2ubuntu0.7), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: moonshot-gss-eap (<= 1.0)
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libgssrpc4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Depends: libc6 (>= 2.15), libgssapi-krb5-2 (>= 1.17)
Suggests: krb5-doc, krb5-user
Description: MIT Kerberos runtime libraries - GSS enabled ONCRPC
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an RPC library used by the Kerberos administrative
 programs and potentially other applications.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libgstreamer-gl1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 633
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gst-plugins-base1.0
Version: 1.20.1-1ubuntu0.5
Replaces: libgstreamer-plugins-bad1.0-0 (<< 1.13.1)
Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.17), libegl1, libgbm1 (>= 8.1~0), libgl1, libglib2.0-0 (>= 2.67.3), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.20.0), libgudev-1.0-0 (>= 165), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.11), libwayland-egl1 (>= 1.15.0), libx11-6, libx11-xcb1 (>= 2:1.7.5), libxcb1
Recommends: gstreamer1.0-gl
Breaks: libgstreamer-plugins-bad1.0-0 (<< 1.13.1)
Description: GStreamer GL libraries
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains the GL library.
Homepage: https://gstreamer.freedesktop.org
Original-Maintainer: Maintainers of GStreamer packages <gst-plugins-base1.0@packages.debian.org>

Package: libgstreamer-plugins-base1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2740
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gst-plugins-base1.0
Version: 1.20.1-1ubuntu0.5
Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.67.3), libgstreamer1.0-0 (>= 1.20.0), liborc-0.4-0 (>= 1:0.4.25), zlib1g (>= 1:1.1.4), iso-codes
Recommends: gstreamer1.0-plugins-base
Suggests: libvisual-0.4-plugins
Breaks: gstreamer1.0-plugins-bad (<< 1.15.1), libgstreamer-plugins-bad1.0-0 (<< 1.15.1), totem-gstreamer (<= 2.17.92-0ubuntu1)
Conflicts: libgstreamer-plugins-bad1.0-0 (<< 1.15.1)
Description: GStreamer libraries from the "base" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains libraries from the "base" set, an essential
 exemplary set of elements.
Homepage: https://gstreamer.freedesktop.org
Original-Maintainer: Maintainers of GStreamer packages <gst-plugins-base1.0@packages.debian.org>

Package: libgstreamer-plugins-good1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 167
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gst-plugins-good1.0
Version: 1.20.3-0ubuntu1.4
Replaces: gstreamer1.0-plugins-good (= 1.0.3-1ubuntu1), libgstreamer-plugins-bad1.0-0 (<< 1.0.3-1ubuntu1)
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.56), libgstreamer-plugins-base1.0-0 (>= 1.20.0), libgstreamer1.0-0 (>= 1.20.0)
Breaks: libgstreamer-plugins-bad1.0-0 (<< 1.0.3-1ubuntu1)
Description: GStreamer development files for libraries from the "good" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains shared GStreamer libraries from the "good" set. The API
 is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Original-Maintainer: Maintainers of GStreamer packages <gst-plugins-good1.0@packages.debian.org>

Package: libgstreamer1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2984
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gstreamer1.0
Version: 1.20.3-0ubuntu1.1
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), libdw1 (>= 0.126), libglib2.0-0 (>= 2.70.0), libunwind8, libcap2-bin
Suggests: gstreamer1.0-tools
Breaks: gstreamer1.0-plugins-bad (<< 1.11.1), gstreamer1.0-plugins-base (<< 1.8.0), libgstreamer-plugins-bad1.0-0 (<< 1.13.1)
Description: Core GStreamer libraries and elements
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains the core library and elements.
Homepage: https://gstreamer.freedesktop.org
Original-Maintainer: Maintainers of GStreamer packages <gstreamer1.0@packages.debian.org>

Package: libgtk-3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 10280
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gtk+3.0
Version: 3.24.33-1ubuntu2.2
Provides: gtk3-binver-3.0.0
Depends: adwaita-icon-theme, hicolor-icon-theme, shared-mime-info, libatk-bridge2.0-0 (>= 2.5.3), libatk1.0-0 (>= 2.35.1), libc6 (>= 2.34), libcairo-gobject2 (>= 1.14.0), libcairo2 (>= 1.14.0), libcolord2 (>= 0.1.10), libcups2 (>= 2.3~b6), libepoxy0 (>= 1.4.3), libfontconfig1 (>= 2.12.6), libfribidi0 (>= 0.19.7), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0 (>= 2.59.0), libharfbuzz0b (>= 2.2.0), libpango-1.0-0 (>= 1.45.5), libpangocairo-1.0-0 (>= 1.44.0), libpangoft2-1.0-0 (>= 1.44.0), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.14.91), libwayland-egl1 (>= 1.15.0), libx11-6 (>= 2:1.4.99.1), libxcomposite1 (>= 1:0.4.5), libxcursor1 (>> 1.1.2), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxi6 (>= 2:1.2.99.4), libxinerama1 (>= 2:1.1.4), libxkbcommon0 (>= 0.5.0), libxrandr2 (>= 2:1.5.0), libgtk-3-common (>= 3.24.33-1ubuntu2.2)
Recommends: libgtk-3-bin, librsvg2-common
Suggests: gvfs
Conffiles:
 /etc/gtk-3.0/settings.ini 17193df36387c79f30763b729b8a49a9
Description: GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the shared libraries.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libgtk-3-bin
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 337
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.24.33-1ubuntu2.2
Replaces: gtk-3-examples (<< 3.24.13)
Depends: gtk-update-icon-cache, libc6 (>= 2.34), libcairo2 (>= 1.14.0), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0 (>= 2.57.2), libgtk-3-0 (>= 3.24.33-1ubuntu2.2), libgtk-3-common (>= 3.24.33-1ubuntu2.2)
Breaks: gtk-3-examples (<< 3.24.13)
Description: programs for the GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the utilities which are used by the libraries
 and other packages.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libgtk-3-common
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 432
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.24.33-1ubuntu2.2
Replaces: libgtk-3-dev (<< 3.24.30-3~)
Depends: dconf-gsettings-backend | gsettings-backend
Recommends: libgtk-3-0
Breaks: libgtk-3-dev (<< 3.24.30-3~)
Conffiles:
 /etc/gtk-3.0/im-multipress.conf c358838e1789c1d4e6da7f525fc922cf
Description: common files for the GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the common files which the libraries need.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libgudev-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgudev (237-2build1)
Version: 1:237-2build1
Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.38.0), libudev1 (>= 199)
Description: GObject-based wrapper library for libudev
 This library makes it much simpler to use libudev from programs already using
 GObject. It also makes it possible to easily use libudev from other
 programming languages, such as Javascript, because of GObject introspection
 support.
Homepage: https://wiki.gnome.org/Projects/libgudev
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libhandy-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 772
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libhandy-1
Version: 1.6.1-1
Depends: libatk1.0-0 (>= 1.12.4), libc6 (>= 2.29), libcairo2 (>= 1.14.0), libfribidi0 (>= 0.19.2), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.59.0), libgtk-3-0 (>= 3.23.1), libpango-1.0-0 (>= 1.14.0)
Description: Library with GTK widgets for mobile phones
 libhandy provides GTK widgets and GObjects to ease developing
 applications for mobile phones.
 .
 This package contains the shared library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://gitlab.gnome.org/GNOME/libhandy

Package: libharfbuzz-icu0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 2.7.4-1ubuntu3.2
Depends: libc6 (>= 2.4), libharfbuzz0b (>= 0.9.4), libicu70 (>= 70.1-1~)
Description: OpenType text shaping engine ICU backend
 HarfBuzz is an implementation of the OpenType Layout engine (aka layout
 engine) and the script-specific logic (aka shaping engine).
 .
 This package contains the ICU backend.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>

Package: libharfbuzz0b
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 860
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 2.7.4-1ubuntu3.2
Replaces: libharfbuzz0, libharfbuzz0a
Depends: libc6 (>= 2.33), libfreetype6 (>= 2.9.1), libglib2.0-0 (>= 2.31.8), libgraphite2-3 (>= 1.2.2)
Conflicts: libharfbuzz0, libharfbuzz0a
Description: OpenType text shaping engine (shared library)
 HarfBuzz is an implementation of the OpenType Layout engine (aka layout
 engine) and the script-specific logic (aka shaping engine).
 .
 This package contains the shared libraries.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>

Package: libheif1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 551
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.12.0-2build1
Depends: libaom3 (>= 3.2.0), libc6 (>= 2.34), libdav1d5 (>= 0.1.0), libde265-0 (>= 1.0.7), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11), libx265-199 (>= 3.5)
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - shared library
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 This package contains the shared library.
Homepage: http://www.libheif.org
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libhogweed6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 336
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.7.3-1build2
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg), libnettle8
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>

Package: libhtml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 222
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 3.76-1build2
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34), libhtml-tagset-perl, liburi-perl
Recommends: libhttp-message-perl
Suggests: libdata-dump-perl
Enhances: libwww-perl
Description: collection of modules that parse HTML text documents
 HTML::Parser is a collection of modules useful for handling HTML documents.
 These modules used to be part of the libwww-perl distribution, but are now
 unbundled in order to facilitate a separate development track.
 .
 Objects of the HTML::Parser class will recognize markup and separate it from
 content data. As different kinds of markup are recognized, the corresponding
 event handler is invoked. The document to be parsed may also be supplied in
 arbitrary chunks, making on-the-fly parsing of network documents possible.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Parser

Package: libhtml-tagset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.20-4
Depends: perl
Description: data tables pertaining to HTML
 HTML::Tagset contains data tables useful in dealing with HTML.  For instance,
 it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements
 which cannot have content.  It provides no functions or methods.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Tagset

Package: libhtml-template-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 181
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.97-1.1
Depends: perl:any, libcgi-pm-perl | perl (<< 5.19)
Suggests: libipc-sharedcache-perl
Description: module for using HTML templates with Perl
 HTML::Template attempts to make using HTML templates simple and
 natural. It extends standard HTML with the pseudo tags <TMPL_VAR>,
 <TMPL_LOOP>, <TMPL_INCLUDE>, <TMPL_IF> and <TMPL_ELSE>. These are used
 to implement some basic logic - variable substitution, loops,
 conditional branches - inside the HTML template, while leaving the more
 complex computations to separate Perl code. This keeps the template
 accessible for designers and other non-Perl people, without limiting
 the programmer.
 .
 HTML::Template optionally stores its cache in shared memory using the
 IPC::SharedCache module. Please install libipc-sharedcache-perl and
 pass the shared_cache option to HTML::Template if you want to make use
 of this.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTML-Template

Package: libhttp-date-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.05-1
Depends: perl, libtimedate-perl, libtime-local-perl (>= 1.28)
Description: module of date conversion routines
 HTTP::Date provides functions that deal the date formats used by the HTTP
 protocol (and then some more). Only the first two functions, time2str() and
 str2time(), are exported by default.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTTP-Date

Package: libhttp-message-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 191
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.36-1
Depends: perl:any, libencode-locale-perl, libencode-perl (>= 3.01), libhttp-date-perl, libio-html-perl, liblwp-mediatypes-perl, liburi-perl
Recommends: libclone-perl
Description: perl interface to HTTP style messages
 The HTTP::Message distribution contains classes useful for representing the
 messages passed in HTTP style communication. These are classes representing
 requests, responses and the headers contained within them.
 .
 The HTTP::Headers class encapsulates HTTP-style message headers. The headers
 consist of attribute-value pairs also called fields, which may be repeated,
 and which are printed in a particular order. The field names are cases
 insensitive.
 .
 Instances of this class are usually created as member variables of the
 HTTP::Request and HTTP::Response classes, internal to the library.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/HTTP-Message

Package: libhunspell-1.7-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 485
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: hunspell
Version: 1.7.0-4build1
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Recommends: hunspell-en-us | hunspell-dictionary | myspell-dictionary
Conflicts: openoffice.org-core (= 2.2.0~rc2-1)
Description: spell checker and morphological analyzer (shared library)
 Hunspell is a spell checker and morphological analyzer library and program
 designed for languages with rich morphology and complex word compounding or
 character encoding. It is based on MySpell and features an Ispell-like
 terminal interface using Curses library, an Ispell pipe interface and an
 OpenOffice.org UNO module.
 .
 Main features:
  - Unicode support (first 65535 Unicode characters)
  - morphological analysis (in custom item and arrangement style)
  - Max. 65535 affix classes and twofold affix stripping (for agglutinative
    languages, like Azeri, Basque, Estonian, Finnish, Hungarian, Turkish, etc.)
  - Support complex compoundings (for example, Hungarian and German)
  - Support language specific algorithms (for example, handling Azeri
    and Turkish dotted i, or German sharp s)
  - Handling conditional affixes, circumfixes, fogemorphemes,
    forbidden words, pseudoroots and homonyms.
 .
 This package contains the shared library.
Original-Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Homepage: https://hunspell.github.io/

Package: libhwloc-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1130
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: hwloc
Version: 2.7.0-2ubuntu1
Depends: libhwloc15 (= 2.7.0-2ubuntu1), libnuma-dev, libltdl-dev
Description: Hierarchical view of the machine - static libs and headers
 Hardware Locality (hwloc) provides a portable abstraction (across OS, versions,
 architectures, ...) of the hierarchical topology of modern architectures. It
 primarily aims at helping high-performance computing applications with
 gathering information about the hardware so as to exploit it accordingly and
 efficiently.
 .
 libhwloc provides a hierarchical view of the machine, NUMA memory nodes,
 sockets, shared caches, cores and simultaneous multithreading. It also gathers
 various attributes such as cache and memory information.
 .
 libhwloc supports old kernels not having sysfs topology information,
 with knowledge of cpusets, offline cpus, and Kerrighed support
 .
 This package contains static libraries and development headers.
Original-Maintainer: Samuel Thibault <sthibault@debian.org>
Homepage: https://www.open-mpi.org/projects/hwloc/

Package: libhwloc-plugins
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: hwloc
Version: 2.7.0-2ubuntu1
Replaces: libhwloc-contrib-plugins (<< 2.1.0+dfsg-3~)
Depends: libc6 (>= 2.34), libpciaccess0, libx11-6, libxml2 (>= 2.7.4), libxnvctrl0, ocl-icd-libopencl1 | libopencl1, libhwloc15 (>= 2.7.0~), libhwloc15 (<< 2.7.0A)
Breaks: libhwloc-contrib-plugins (<< 2.1.0+dfsg-3~)
Description: Hierarchical view of the machine - plugins
 libhwloc provides a portable abstraction (across OS, versions,
 architectures, ...) of the hierarchical topology of modern architectures. It
 primarily aims at helping high-performance computing applications with
 gathering information about the hardware so as to exploit it accordingly and
 efficiently.
 .
 libhwloc provides a hierarchical view of the machine, NUMA memory nodes,
 sockets, shared caches, cores and simultaneous multithreading. It also gathers
 various attributes such as cache and memory information.
 .
 libhwloc supports old kernels not having sysfs topology information,
 with knowledge of cpusets, offline cpus, and Kerrighed support
 .
 This package contains plugins to add more discovery support. This includes
  - PCI support
  - libxml support
Original-Maintainer: Samuel Thibault <sthibault@debian.org>
Homepage: https://www.open-mpi.org/projects/hwloc/

Package: libhwloc15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 386
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: hwloc
Version: 2.7.0-2ubuntu1
Depends: libc6 (>= 2.34), libudev1 (>= 183)
Recommends: libhwloc-plugins
Suggests: libhwloc-contrib-plugins
Breaks: libhwloc-contrib-plugins (<< 1.10~), libhwloc-plugins (<< 1.10~)
Description: Hierarchical view of the machine - shared libs
 libhwloc provides a portable abstraction (across OS, versions,
 architectures, ...) of the hierarchical topology of modern architectures. It
 primarily aims at helping high-performance computing applications with
 gathering information about the hardware so as to exploit it accordingly and
 efficiently.
 .
 libhwloc provides a hierarchical view of the machine, NUMA memory nodes,
 sockets, shared caches, cores and simultaneous multithreading. It also gathers
 various attributes such as cache and memory information.
 .
 libhwloc supports old kernels not having sysfs topology information,
 with knowledge of cpusets, offline cpus, and Kerrighed support
 .
 This package contains shared libraries.
Original-Maintainer: Samuel Thibault <sthibault@debian.org>
Homepage: https://www.open-mpi.org/projects/hwloc/

Package: libhyphen0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: hyphen
Version: 2.8.8-7build2
Depends: libc6 (>= 2.14)
Description: ALTLinux hyphenation library - shared library
 ALTLinuxhyph is a modified version of libhnj which is a high quality
 hyphenation and justification library based on the TeX
 hyphenation algorithm. The TeX hyphenation patterns could be used after
 a preprocessing step.
 .
 It is used in OpenOffice.org
 .
 This package contains the shared library.
Original-Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Homepage: https://github.com/hunspell/hyphen

Package: libibverbs-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2202
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rdma-core
Version: 39.0-1
Depends: ibverbs-providers (= 39.0-1), libibverbs1 (= 39.0-1), libnl-3-dev, libnl-route-3-dev
Description: Development files for the libibverbs library
 libibverbs is a library that allows userspace processes to use RDMA
 "verbs" as described in the InfiniBand Architecture Specification and
 the RDMA Protocol Verbs Specification.  iWARP ethernet NICs support
 RDMA over hardware-offloaded TCP/IP, while InfiniBand is a
 high-throughput, low-latency networking technology.  InfiniBand host
 channel adapters (HCAs) and iWARP NICs commonly support direct
 hardware access from userspace (kernel bypass), and libibverbs
 supports this when available.
 .
 This package is needed to compile programs against libibverbs1.
 It contains the header files and static libraries (optionally)
 needed for compiling.
Original-Maintainer: Benjamin Drung <benjamin.drung@ionos.com>
Homepage: https://github.com/linux-rdma/rdma-core

Package: libibverbs1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rdma-core
Version: 39.0-1
Depends: adduser, libc6 (>= 2.34), libnl-3-200 (>= 3.2.7), libnl-route-3-200 (>= 3.2.7)
Recommends: ibverbs-providers
Breaks: ibverbs-providers (<< 34~)
Description: Library for direct userspace use of RDMA (InfiniBand/iWARP)
 libibverbs is a library that allows userspace processes to use RDMA
 "verbs" as described in the InfiniBand Architecture Specification and
 the RDMA Protocol Verbs Specification.  iWARP ethernet NICs support
 RDMA over hardware-offloaded TCP/IP, while InfiniBand is a
 high-throughput, low-latency networking technology.  InfiniBand host
 channel adapters (HCAs) and iWARP NICs commonly support direct
 hardware access from userspace (kernel bypass), and libibverbs
 supports this when available.
 .
 For this library to be useful, a device-specific plug-in module
 should also be installed.
 .
 This package contains the shared library.
Original-Maintainer: Benjamin Drung <benjamin.drung@ionos.com>
Homepage: https://github.com/linux-rdma/rdma-core

Package: libice-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 221
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.0.10-1build2
Depends: libice6 (= 2:1.0.10-1build2), x11proto-dev
Suggests: libice-doc
Description: X11 Inter-Client Exchange library (development headers)
 This package provides the main interface to the X11 Inter-Client Exchange
 library, which allows for communication of data between X clients.
 .
 This package contains the development headers for the library found in libice6.
 Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libICE
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libice6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.0.10-1build2
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.33), x11-common
Description: X11 Inter-Client Exchange library
 This package provides the main interface to the X11 Inter-Client Exchange
 library, which allows for communication of data between X clients.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libICE
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libicu-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 46016
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 70.1-2
Replaces: icu-devtools (<< 70.1~rc-1~)
Depends: libicu70 (= 70.1-2), icu-devtools (>= 70.1-2), libc6-dev | libc-dev
Suggests: icu-doc
Breaks: icu-devtools (<< 70.1~rc-1~)
Description: Development files for International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the development
 files for ICU.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://icu.unicode.org/

Package: libicu70
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34444
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 70.1-2
Replaces: libiculx63 (<< 63.1-5)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~)
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://icu.unicode.org/

Package: libidn-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 437
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.38-4ubuntu1
Replaces: libidn11-dev (<< 1.38-1~)
Depends: libidn12 (= 1.38-4ubuntu1), pkg-config
Suggests: idn
Breaks: libidn11-dev (<< 1.38-1~)
Description: Development files for GNU Libidn, an IDN library
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the header files, static library, pkg-config
 information, and API man pages.
Homepage: https://www.gnu.org/software/libidn/
Original-Maintainer: Debian Libidn Team <help-libidn@gnu.org>

Package: libidn11-dev
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.38-4ubuntu1
Depends: libidn-dev (>= 1.38-1~)
Description: Transitional development package for GNU Libidn
 This is a transitional package.  It can safely be removed.
Homepage: https://www.gnu.org/software/libidn/
Original-Maintainer: Debian Libidn Team <help-libidn@gnu.org>

Package: libidn12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.38-4ubuntu1
Depends: libc6 (>= 2.14)
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/
Original-Maintainer: Debian Libidn Team <help-libidn@gnu.org>

Package: libidn2-0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 220
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn2
Version: 2.3.2-2build1
Depends: libc6 (>= 2.14), libunistring2 (>= 0.9.7)
Description: Internationalized domain names (IDNA2008/TR46) library
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008/TR46.
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2
Original-Maintainer: Debian Libidn team <help-libidn@gnu.org>

Package: libidn2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 249
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn2
Version: 2.3.2-2build1
Replaces: libidn2-0-dev (<< 2.0.3-1~)
Provides: libidn2-0-dev
Depends: libidn2-0 (= 2.3.2-2build1)
Breaks: libidn2-0-dev (<< 2.0.3-1~)
Description: Internationalized domain names (IDNA2008/TR46) development files
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008/TR46.
 .
 This package contains header files and libraries for static linking.
Homepage: https://www.gnu.org/software/libidn/#libidn2
Original-Maintainer: Debian Libidn team <help-libidn@gnu.org>

Package: libiec61883-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libiec61883
Version: 1.2.0-4build3
Depends: libc6 (>= 2.4), libraw1394-11 (>= 2.1.2)
Description: partial implementation of IEC 61883 (shared lib)
 Implementation of IEC 61883, part 1 (CIP, plug registers, and CMP), part 2
 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of IIDC, nearly all
 FireWire multimedia devices use IEC 61883 protocols.
 .
 The libiec61883 library provides a higher level API for streaming DV,
 MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
 transmission. It uses the new "rawiso" API of libraw1394, which
 transparently provides mmap-ed DMA for efficient data transfer. It also
 represents the third generation of I/O technology for Linux 1394 for
 these media types thereby removing the complexities of additional kernel
 modules, /dev nodes, and procfs. It also consolidates features for plug
 control registers and connection management that previously existed in
 experimental form in an unreleased version of libavc1394.
Homepage: https://ieee1394.wiki.kernel.org/index.php/Main_Page
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: libijs-0.35
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ijs
Version: 0.35-15build2
Depends: libc6 (>= 2.14)
Description: IJS raster image transport protocol: shared library
 IJS is, first and foremost, a protocol for transmission of raster page
 images. This snapshot provides a reference implementation of the protocol,
 the design of which is still in flux. When the protocol specification is
 published, it will be authoritative. Applications should feel free to link
 against the library provided in this package, adapt that code for their own
 needs, or roll a completely new implementation.
 .
 IJS is a client-server protocol, used to write ghostscript drivers. The
 drivers are separate programs. The client and server communicate via pipes,
 though shared memory may be used additionally in the future. Currently IJS
 is used by the hpijs and ijsgimpprint drivers.
 .
 Code for both the client- and server-side is included in the library. This
 package provides the shared library.
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Homepage: http://www.linuxprinting.org/ijs/

Package: libilmbase25
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 880
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ilmbase
Version: 2.5.7-2
Replaces: libilmbase23 (>= 2.3)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 6)
Breaks: libilmbase23 (>= 2.3)
Description: several utility libraries from ILM used by OpenEXR
 IlmBase are a set of utility libraries released by ILM, and used in
 their OpenEXR implementation. Included in this package you can find:
 .
  * libHalf: a class (Half) for manipulating "half" values (16-bit
    floating point format) as if they were a built-in C++ data type.
 .
  * libIlmThread: a thread abstraction library on top of pthreads.
 .
  * libImath: a math library with support for matrices, 2d- and
    3d-transformations, solvers for linear/quadratic/cubic equations,
    and more.
 .
  * libIex: an exception handling library.
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Homepage: http://www.openexr.com

Package: libimagequant0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libimagequant
Version: 2.17.0-1
Depends: libc6 (>= 2.29), libgomp1 (>= 4.9)
Description: palette quantization library
 Small, portable C library for high-quality conversion of RGBA
 images to 8-bit indexed-color (palette) images.
 .
 This library powers pngquant and other PNG optimizers.
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Homepage: https://github.com/ImageOptim/libimagequant

Package: libinotifytools0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: inotify-tools
Version: 3.22.1.0-2
Replaces: inotify-tools (<< 3.10-2)
Depends: libc6 (>= 2.33)
Description: utility wrapper around inotify
 inotify (inode notify) is a Linux kernel subsystem that monitors events in
 filesystems and reports those events to applications in real time via API.
 .
 inotify can be used to monitor individual files or directories. When a
 directory is monitored, inotify will return events for the directory itself
 and for files inside the directory.
 .
 libinotifytools is a thin layer on top of the kernel interface which makes
 it easy to set up watches on many files at once, read events without having
 to deal with low-level I/O and several utility functions for inotify-related
 string formatting.
Original-Maintainer: Joao Eriberto Mota Filho <eriberto@debian.org>
Homepage: https://github.com/rvoicilas/inotify-tools/wiki/

Package: libio-html-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.004-2
Depends: perl:any
Description: open an HTML file with automatic charset detection
 IO::HTML provides an easy way to open a file containing HTML while
 automatically determining its encoding.  It uses the HTML5 encoding
 sniffing algorithm specified in section 8.2.2.1 of the draft standard.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/IO-HTML

Package: libip4tc2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.7-1ubuntu5.2
Depends: libc6 (>= 2.28)
Description: netfilter libip4tc library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 This package contains the user-space iptables (IPv4) C library from the
 Netfilter xtables framework.
 .
 iptables IPv4 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>

Package: libip6tc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.7-1ubuntu5.2
Depends: libc6 (>= 2.28)
Description: netfilter libip6tc library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 This package contains the user-space iptables (IPv6) C library from the
 Netfilter xtables framework.
 .
 iptables IPv6 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>

Package: libisc-export1105
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 510
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bind9-libs
Version: 1:9.11.19+dfsg-2.1ubuntu3
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1)
Description: Exported ISC Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisc shared library.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <team+dns@tracker.debian.org>

Package: libisl23
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: isl
Version: 0.24-2build1
Replaces: libisl-dbg (<< 0.19)
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg)
Breaks: libisl-dbg (<< 0.19)
Description: manipulating sets and relations of integer points bounded by linear constraints
 isl is a library for manipulating sets and relations of integer points
 bounded by linear constraints. Supported operations on sets include
 intersection, union, set difference, emptiness check, convex hull,
 (integer) affine hull, integer projection, and computing the lexicographic
 minimum using parametric integer programming. It also includes an ILP solver
 based on generalized basis reduction.
 .
 This package contains the runtime library.
Homepage: http://isl.gforge.inria.fr/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libitm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.34)
Description: GNU Transactional Memory Library
 GNU Transactional Memory Library (libitm) provides transaction support for
 accesses to the memory of a process, enabling easy-to-use synchronization of
 accesses to shared memory by several threads.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libjack-jackd2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jackd2
Version: 1.9.20~dfsg-1
Replaces: libjack-0.116, libjack-0.125
Provides: libjack-0.116, libjack-0.125
Depends: libc6 (>= 2.34), libdb5.3, libgcc-s1 (>= 3.0), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 11)
Suggests: jackd2 (= 1.9.20~dfsg-1)
Conflicts: jackd2 (>> 1.9.20~dfsg-1), jackd2 (<< 1.9.20~dfsg-1), libjack-0.116, libjack-0.125, libjack0
Description: JACK Audio Connection Kit (libraries)
 JACK is a low-latency sound server, allowing multiple applications to
 connect to one audio device, and to share audio between themselves.
 .
 This package contains the shared libraries.
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Homepage: https://jackaudio.org/

Package: libjansson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jansson
Version: 2.13.1-1.1build3
Depends: libc6 (>= 2.14)
Description: C library for encoding, decoding and manipulating JSON data
 Jansson is a C library for encoding, decoding and manipulating JSON data.
 .
 It features:
  * Simple and intuitive API and data model
  * Comprehensive documentation
  * No dependencies on other libraries
  * Full Unicode support (UTF-8)
  * Extensive test suite
Homepage: http://www.digip.org/jansson/
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: libjavascriptcoregtk-4.0-18
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32830
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: webkit2gtk
Version: 2.50.4-0ubuntu0.22.04.1
Depends: libatomic1 (>= 4.8), libc6 (>= 2.35), libgcc-s1 (>= 7), libglib2.0-0 (>= 2.65.1), libicu70 (>= 70.1-1~), libstdc++6 (>= 12), libsystemd0
Description: JavaScript engine library from WebKitGTK
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Original-Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>

Package: libjbig0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit
Version: 2.1-3.1ubuntu0.22.04.1
Depends: libc6 (>= 2.4)
Description: JBIGkit libraries
 JBIG-KIT provides a portable library of compression and decompression functions
 with a documented interface that you can include very easily into your image or
 document processing software.
 .
 This package contains the dynamically linked library.
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/
Original-Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>

Package: libjbig2dec0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 182
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jbig2dec
Version: 0.19-3build2
Depends: libc6 (>= 2.14)
Description: JBIG2 decoder library - shared libraries
 jbig2dec is a decoder library and example utility implementing the JBIG2
 bi-level image compression spec. Also known as ITU T.88 and ISO IEC
 14492, and included by reference in Adobe's PDF version 1.4 and later.
 .
 This package contains the shared library libjbig2dec.
Homepage: https://jbig2dec.com/
Original-Maintainer: Debian Printing Team <debian-printing@lists.debian.org>

Package: libjemalloc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 756
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jemalloc
Version: 5.2.1-4ubuntu1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.4)
Description: general-purpose scalable concurrent malloc(3) implementation
 A library providing a malloc(3) implementation for multi-threaded processes on
 multi-processor systems.
 .
 Notable features are reduced lock contention, predictable low fragmentation,
 and introspection with heap profiling.
Homepage: http://jemalloc.net/
Original-Maintainer: Faidon Liambotis <paravoid@debian.org>

Package: libjpeg-turbo8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 543
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 2.1.2-0ubuntu1
Replaces: libjpeg8 (<< 8c-2ubuntu5)
Depends: libc6 (>= 2.14)
Breaks: libjpeg8 (<< 8c-2ubuntu5)
Description: IJG JPEG compliant runtime library.
 Runtime library supporting the Independent JPEG Group's standard
 for JPEG files.
 .
 This package contains the shared library which is a drop in
 replacement for libjpeg8, which has better performance than
 standard libjpeg by use of SIMD and other optimizations.
Homepage: http://libjpeg-turbo.virtualgl.org/

Package: libjpeg8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 9
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libjpeg8-empty
Version: 8c-2ubuntu10
Depends: libjpeg-turbo8 (>= 1.1.90+svn722-1ubuntu6)
Description: Independent JPEG Group's JPEG runtime library (dependency package)
 libjpeg8 dependency package, depending on libjpeg-turbo8.

Package: libjq1
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 347
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jq
Version: 1.6-2.1ubuntu3.1
Depends: libc6 (>= 2.35), libonig5 (>= 6.8.1)
Description: lightweight and flexible command-line JSON processor - shared library
 jq is like sed for JSON data – you can use it to slice
 and filter and map and transform structured data with
 the same ease that sed, awk, grep and friends let you
 play with text.
 .
 It is written in portable C, and it has minimal runtime
 dependencies.
 .
 jq can mangle the data format that you have into the
 one that you want with very little effort, and the
 program to do so is often shorter and simpler than
 you’d expect.
 .
 This package contains the shared library.
Homepage: https://github.com/stedolan/jq
Original-Maintainer: ChangZhuo Chen (陳昌倬) <czchen@debian.org>

Package: libjs-jquery
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 679
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: node-jquery
Version: 3.6.0+dfsg+~3.5.13-1
Recommends: javascript-common
Description: JavaScript library for dynamic web applications
 jQuery is a fast, concise, JavaScript Library
 that simplifies how you traverse HTML documents, handle events,
 perform animations, and add Ajax interactions to your web pages.
 jQuery is designed to change the way that you write JavaScript.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://jquery.com/

Package: libjs-jquery-ui
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 2400
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: jqueryui
Version: 1.13.1+dfsg-1
Depends: libjs-jquery
Recommends: javascript-common
Suggests: libjs-jquery-ui-docs
Description: JavaScript UI library for dynamic web applications
 jQuery UI provides abstractions for low-level interaction and
 animation, advanced effects and high-level, themeable widgets,
 built on top of the jQuery JavaScript Library, that you can use
 to build highly interactive web applications.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://jqueryui.com/

Package: libjs-sphinxdoc
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 194
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: sphinx
Version: 4.3.2-1
Depends: libjs-jquery (>= 1.11.1), libjs-underscore (>= 1.3.1)
Description: JavaScript support for Sphinx documentation
 Sphinx is a tool for producing documentation for Python projects, using
 reStructuredText as markup language.
 .
 This package provides JavaScript code for documentation generated by Sphinx.
Homepage: https://www.sphinx-doc.org/

Package: libjs-underscore
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 345
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: underscore
Version: 1.13.2~dfsg-2
Recommends: javascript-common, libjs-jquery
Description: JavaScript's functional programming helper library
 Underscore is a utility-belt library for JavaScript that provides a lot
 of the functional programming support that you would expect in
 Prototype.js (or Ruby), but without extending any of the built-in
 JavaScript objects.  It's the tie to go along with jQuery's tux.
 .
 Underscore provides 60-odd functions that support both the usual
 functional suspects: map, select, invoke - as well as more specialized
 helpers: function binding, javascript templating, deep equality
 testing, and so on.  It delegates to built-in functions, if present, so
 modern browsers will use the native implementations of forEach, map,
 reduce, filter, every, some and indexOf.
Original-Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Homepage: https://underscorejs.org/

Package: libjson-c5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: json-c
Version: 0.15-3~ubuntu1.22.04.2
Depends: libc6 (>= 2.33)
Description: JSON manipulation library - shared library
 This library allows you to easily construct JSON objects in C,
 output them as JSON formatted strings and parse JSON formatted
 strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki
Original-Maintainer: Nicolas Mora <babelouest@debian.org>

Package: libjson-glib-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 210
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: json-glib
Version: 1.6.6-1build1
Depends: libjson-glib-1.0-common (>= 1.6.6-1build1), libc6 (>= 2.4), libglib2.0-0 (>= 2.55.2)
Description: GLib JSON manipulation library
 JSON-GLib is a library for parsing, generating and manipulating JavaScript
 Object Notation (JSON) data streams using the GLib type system. It allows
 manipulating JSON data types with a Document Object Model API. It also
 allows serializing and deserializing simple or complex GObjects to and
 from JSON data types.
Homepage: https://wiki.gnome.org/Projects/JsonGlib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libjson-glib-1.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: json-glib
Version: 1.6.6-1build1
Description: GLib JSON manipulation library (common files)
 JSON-GLib is a library for parsing, generating and manipulating JavaScript
 Object Notation (JSON) data streams using the GLib type system. It allows
 manipulating JSON data types with a Document Object Model API. It also
 allows serializing and deserializing simple or complex GObjects to and
 from JSON data types.
 .
 This package contains the translations files.
Homepage: https://wiki.gnome.org/Projects/JsonGlib
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libjson-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 237
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.04000-1
Depends: perl:any
Recommends: libjson-xs-perl
Description: module for manipulating JSON-formatted data
 JSON is a Perl module for manipulating data stored in the format of the same
 name. JavaScript Object Notation (JSON) is a simple data serialization format
 (defined in RFC 4627) that serves as an alternative to XML.
 .
 The primary purpose of this module is to select an appropriate backend JSON
 implementation. It prefers either JSON::XS (see libjson-xs-perl) or JSON::PP
 (see libjson-pp-perl), but will fall back on a backport implementation if
 neither are available.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/JSON

Package: libjson-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.040-0ubuntu0.22.04.1
Depends: perl, perlapi-5.34.0, libc6 (>= 2.34), libcommon-sense-perl, libtypes-serialiser-perl
Breaks: libjson-perl (<< 2.90)
Description: module for manipulating JSON-formatted data (C/XS-accelerated)
 JSON::XS is a module for manipulating data stored in the JavaScript Object
 Notation (JSON) serialization format (defined in RFC 4627), which serves as
 an alternative to XML.
 .
 This C/XS-accelerated JSON implementation confers significant performance
 gains if available. After installing this package, any code using the JSON
 module (see libjson-perl) will automagically benefit from this.
Homepage: https://metacpan.org/release/JSON-XS
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>

Package: libjxr-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: jxrlib
Version: 1.2~git20170615.f752187-5
Depends: libc6 (>= 2.34), libjxr0 (>= 1.0)
Description: JPEG-XR lib - command line apps
 JPEG XR is an approved ISO/IEC International standard (its official
 designation is ISO/IEC 29199-2).
 .
 JPEG XR started its life in Microsoft Research. It publicly first appeared as
 the HD Photo format in Windows Vista.
 .
 For web developers, JPEG XR has a large number of interesting features, see
 the table below. Some of these are big advantages over other image formats
 like JPEG, PNG, OpenEXR, and TIFF.
  - Better Compression (40% smaller than JPEG)
  - Lossless Mode (better compression than PNG)
  - Alpha Channel (compress color lossy and alpha losslessly)
  - Extended Bitdepth (supports 8-, 16-, and 32-bit/channel)
  - Progressive Decode
  - Advanced Decoding Features (tile-based layout, for efficient
    region-of-interest access.)
 .
 Provides command line tools for JPEG XR libs (JxrDecApp & JxrEncApp)
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Homepage: https://github.com/4creators/jxrlib

Package: libjxr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 410
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: jxrlib
Version: 1.2~git20170615.f752187-5
Depends: libc6 (>= 2.29)
Description: JPEG-XR lib - libraries
 JPEG XR is an approved ISO/IEC International standard (its official
 designation is ISO/IEC 29199-2).
 .
 JPEG XR started its life in Microsoft Research. It publicly first appeared as
 the HD Photo format in Windows Vista.
 .
 For web developers, JPEG XR has a large number of interesting features, see
 the table below. Some of these are big advantages over other image formats
 like JPEG, PNG, OpenEXR, and TIFF.
  - Better Compression (40% smaller than JPEG)
  - Lossless Mode (better compression than PNG)
  - Alpha Channel (compress color lossy and alpha losslessly)
  - Extended Bitdepth (supports 8-, 16-, and 32-bit/channel)
  - Progressive Decode
  - Advanced Decoding Features (tile-based layout, for efficient
    region-of-interest access.)
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Homepage: https://github.com/4creators/jxrlib

Package: libk5crypto3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 293
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Depends: libc6 (>= 2.33), libkrb5support0 (>= 1.16)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.18~), libkrb5-3 (<= 1.18~)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libkadm5clnt-mit12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Depends: libc6 (>= 2.25), libcom-err2 (>= 1.43.9), libgssapi-krb5-2 (>= 1.17), libgssrpc4 (>= 1.6.dfsg.2), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.15~beta1), libkrb5support0 (>= 1.17)
Suggests: krb5-doc, krb5-user
Conflicts: libkdb5-8
Description: MIT Kerberos runtime libraries - Administration Clients
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library used by clients of the Kerberos
 administration protocol.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libkadm5srv-mit12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 227
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Depends: libc6 (>= 2.33), libcom-err2 (>= 1.43.9), libgssapi-krb5-2 (>= 1.6.dfsg.2), libgssrpc4 (>= 1.6.dfsg.2), libk5crypto3 (>= 1.6.dfsg.2), libkdb5-10 (>= 1.19.2), libkrb5-3 (>= 1.13~alpha1+dfsg), libkrb5support0 (>= 1.17)
Suggests: krb5-doc, krb5-user
Conflicts: libkdb5-8
Description: MIT Kerberos runtime libraries - KDC and Admin Server
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library used by Kerberos administrative
 servers.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libkdb5-10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 184
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Depends: libc6 (>= 2.33), libcom-err2 (>= 1.43.9), libgssrpc4 (>= 1.7dfsg~alpha1), libk5crypto3 (>= 1.7+dfsg), libkrb5-3 (>= 1.14+dfsg), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: krb5-kdc (= 1.13~alpha1+dfsg-1), libkadm5srv-mit8 (<< 1.11+dfsg~)
Description: MIT Kerberos runtime libraries - Kerberos database
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the internal Kerberos database libraries.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libkeyutils1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.6.1-2ubuntu3
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: https://people.redhat.com/~dhowells/keyutils/
Original-Maintainer: Christian Kastner <ckk@debian.org>

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: klibc
Version: 2.0.10-4ubuntu0.1
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Original-Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 139
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 29-1ubuntu1
Depends: libc6 (>= 2.33), liblzma5 (>= 5.1.1alpha+20120614), libssl3 (>= 3.0.0~~alpha1), libzstd1 (>= 1.4.0)
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libkrb5-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1053
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Depends: libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.18.2), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.19.2-2ubuntu0.7), libssl3 (>= 3.0.0~~alpha1)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libapache2-mod-auth-kerb (<= 5.4-2.4), libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libkrb5-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 179
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Replaces: krb5-multidev (<< 1.8+dfsg~alpha1-3)
Depends: krb5-multidev (= 1.19.2-2ubuntu0.7)
Suggests: krb5-doc
Conflicts: heimdal-dev
Description: headers and development libraries for MIT Kerberos
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the symlinks, headers, and development libraries
 needed to compile and link programs that use the Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libkrb5support0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 165
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.19.2-2ubuntu0.7
Depends: libc6 (>= 2.34)
Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.16), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-8 (<< 1.16)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libksba8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 302
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libksba
Version: 1.6.0-2ubuntu0.2
Depends: libc6 (>= 2.14), libgpg-error0 (>= 1.14)
Description: X.509 and CMS support library
 KSBA (pronounced Kasbah) is a library to make X.509 certificates as
 well as the CMS easily accessible by other applications.  Both
 specifications are building blocks of S/MIME and TLS.
 .
 KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER
 Encoder, Certificate Handling and CMS Handling.
 .
 This package contains the runtime library files.
Homepage: https://www.gnupg.org/related_software/libksba/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: liblcms2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 414
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.12~rc1-2build2
Depends: libc6 (>= 2.29)
Suggests: liblcms2-utils
Description: Little CMS 2 color management library
 LittleCMS 2 intends to be a small-footprint color management engine, with
 special focus on accuracy and performance. It uses the International Color
 Consortium standard (ICC) of color management. LittleCMS 2 is a full
 implementation of ICC specification 4.2 plus all addendums. It fully supports
 all V2 and V4 profiles, including abstract, devicelink and named color
 profiles.
 .
 This package contains the shared library of liblcms2.
Homepage: http://www.littlecms.com/
Original-Maintainer: Thomas Weber <tweber@debian.org>

Package: libldap-2.5-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 570
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.5.19+dfsg-0ubuntu0.22.04.1
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.34), libgnutls30 (>= 3.7.2), libsasl2-2 (>= 2.1.27+dfsg2)
Recommends: libldap-common
Conflicts: ldap-utils (<= 2.1.23-1)
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>

Package: libldap-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: openldap
Version: 2.5.19+dfsg-0ubuntu0.22.04.1
Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1)
Conffiles:
 /etc/ldap/ldap.conf 4f02c6860a58b7402a4b5c5ec24aa7b2
Description: OpenLDAP common files for libraries
 These are common files for the run-time libraries for the OpenLDAP
 (Lightweight Directory Access Protocol) servers and clients.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>

Package: libldap-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1566
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.5.19+dfsg-0ubuntu0.22.04.1
Replaces: libldap2-dev (<< 2.5.4+dfsg-1~)
Provides: libldap2-dev
Depends: libldap-2.5-0 (= 2.5.19+dfsg-0ubuntu0.22.04.1)
Breaks: libldap2-dev (<< 2.5.4+dfsg-1~)
Description: OpenLDAP development libraries
 This package allows development of LDAP applications using the OpenLDAP
 libraries. It includes headers, libraries and links to allow static and
 dynamic linking.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>

Package: libldap2-dev
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: openldap
Version: 2.5.19+dfsg-0ubuntu0.22.04.1
Depends: libldap-dev
Description: transitional package for libldap-dev
 This is a transitional package from libldap2-dev to libldap-dev. It can be
 safely removed.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>

Package: libllvm14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106918
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-14
Version: 1:14.0.0-1ubuntu1.1
Depends: libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 12), libtinfo6 (>= 6), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.0)
Description: Modular compiler and toolchain technologies, runtime library
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVM runtime library.
Homepage: https://www.llvm.org/
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>

Package: libllvm15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 114208
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-15
Version: 1:15.0.7-0ubuntu0.22.04.3
Depends: libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 12), libtinfo6 (>= 6), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.0)
Description: Modular compiler and toolchain technologies, runtime library
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVM runtime library.
Homepage: https://www.llvm.org/
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>

Package: liblmdb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lmdb
Version: 0.9.24-1build2
Depends: libc6 (>= 2.34)
Description: Lightning Memory-Mapped Database shared library
 This package contains the LMDB shared library.
 .
 Lighting Memory-Mapped Database (LMDB) is an ultra-fast, ultra-compact
 key-value embedded data store developed for the OpenLDAP Project.  It uses
 memory-mapped files, so it has the read performance of a pure in-memory
 database while still offering the persistence of standard disk-based
 databases, and is only limited to the size of the virtual address space, (it
 is not limited to the size of physical RAM).
Homepage: http://symas.com/mdb/
Original-Maintainer: LMDB <lmdb@packages.debian.org>

Package: liblocale-gettext-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.07-4build3
Depends: libc6 (>= 2.34)
Pre-Depends: perl-base, perlapi-5.34.0
Description: module using libc functions for internationalization in Perl
 The Locale::gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/gettext

Package: liblockfile-bin
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: liblockfile
Version: 1.17-1build2
Replaces: liblockfile1 (<< 1.09-1)
Depends: libc6 (>= 2.34)
Breaks: liblockfile1 (<< 1.09-1)
Description: support binaries for and cli utilities based on liblockfile
 This package contains support binaries for the liblockfile library,
 and the command-line utility ``dotlockfile''.
Homepage: https://github.com/miquels/liblockfile
Original-Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>

Package: liblockfile1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: liblockfile
Version: 1.17-1build2
Depends: libc6 (>= 2.33), liblockfile-bin (>= 1.17-1build2)
Description: NFS-safe locking library
 Liblockfile is a shared library with NFS-safe locking functions.
Homepage: https://github.com/miquels/liblockfile
Original-Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>

Package: liblqr-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: liblqr
Version: 0.4.2-2.1
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.24.0)
Description: converts plain array images into multi-size representation
 The LiquidRescale (lqr) library provides a C/C++ API for performing
 non-uniform resizing of images by the seam-carving technique.
 .
 The library takes images in plain array format as input and converts
 them to a multi-size representation.
 .
 Following is a list of features:
 .
   * Areas in the image can be marked for preservation or discard
   * Once the image has been fully processed, the scaling can be done
     in real-time. In fact, the information can be saved and read out
     later without any further processing
   * The resizing is done with a single function which automatically
     performs all the necessary operations; it can also work in
     successive steps without wasting computational time
   * Possibility to tune the carving operation by letting the seams be
     less connected, or more rigid, or both
   * Can export and import the visibility map (the seams)
   * Other images can be attached and undergo the same carving process
     as the parent image
   * The automatic feature detection algorithm can be tuned by
     selecting among different energy gradient functions
   * Reports progress through a customizable interface
   * A signalling system permits one to cleanly handle errors
 .
 The library implements the algorithm described in the paper "Seam
 Carving for Content-Aware Image Resizing" by Shai Avidan and Ariel
 Shamir, which can be found at
 http://www.faculty.idc.ac.il/arik/imret.pdf
 .
 This package contains the shared library.
Original-Maintainer: Bernd Zeimetz <bzed@debian.org>
Homepage: http://liblqr.wikidot.com/

Package: liblsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2961
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: LeakSanitizer -- a memory leak detector (runtime)
 LeakSanitizer (Lsan) is a memory leak detector which is integrated
 into AddressSanitizer.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libltdl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 938
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.6-15build2
Replaces: libltdl3-dev, libltdl7-dev, libtool (<< 1.5.20)
Provides: libltdl3-dev, libltdl7-dev
Depends: libltdl7 (= 2.4.6-15build2), automake-1.16
Recommends: libtool
Suggests: libtool-doc
Conflicts: libltdl3-dev, libltdl7-dev, libtool (<< 1.5.20), libtool1.4
Description: System independent dlopen wrapper for GNU libtool
 This package contains the header files and static libraries for the
 libltdl package.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen
Homepage: https://www.gnu.org/software/libtool/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: libltdl7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 419
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.6-15build2
Depends: libc6 (>= 2.34)
Description: System independent dlopen wrapper for GNU libtool
 This package contains the run-time libltdl library.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen
Homepage: https://www.gnu.org/software/libtool/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: liblua5.1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 405
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lua5.1
Version: 5.1.5-8.1build4
Depends: libc6 (>= 2.29), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.1
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.
Original-Maintainer: John V. Belmonte <jbelmonte@debian.org>
Homepage: http://www.lua.org

Package: liblua5.3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 498
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lua5.3
Version: 5.3.6-1build1
Depends: libc6 (>= 2.34), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.3
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.
Homepage: http://www.lua.org
Original-Maintainer: Debian Lua Team <pkg-lua-devel@lists.alioth.debian.org>

Package: liblvm2cmd2.03
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2939
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2
Version: 2.03.11-2.1ubuntu5
Depends: libaio1 (>= 0.3.93), libblkid1 (>= 2.24.2), libc6 (>= 2.33), libselinux1 (>= 3.1~), libsystemd0 (>= 222), libudev1 (>= 183), dmeventd
Description: LVM2 command library
 This package contains the lvm2cmd shared library.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>

Package: liblwp-mediatypes-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 6.04-1
Depends: perl
Description: module to guess media type for a file or a URL
 LWP::MediaTypes provides functions for handling media (also known as MIME)
 types and encodings. The mapping from file extensions to media types is
 defined by the media.types file. If the ~/.media.types file exists it is used
 instead. For backwards compatibility it will also look for ~/.mime.types.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/LWP-MediaTypes

Package: liblz4-1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 1.9.3-2build2
Replaces: liblz4-1a
Depends: libc6 (>= 2.14)
Breaks: liblz4-1a
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/Cyan4973/lz4
Original-Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>

Package: liblzf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: liblzf
Version: 3.6-3
Depends: libc6 (>= 2.4)
Description: Very small data compression library
 This library implements the very, very fast LZF compression algorithm written
 in C. Compression ratios are moderate with 40 to 50 percent for typical
 binary data, but decompression speed is basically at unoptimized memcpy
 speed.
Original-Maintainer: Timo Röhling <timo@gaussglocke.de>
Homepage: http://software.schmorp.de/pkg/liblzf.html

Package: liblzma-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 613
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.2.5-2ubuntu1
Depends: liblzma5 (= 5.2.5-2ubuntu1)
Suggests: liblzma-doc
Description: XZ-format compression library - development files
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.) This package provides the
 development library needed to build programs using liblzma.
Homepage: https://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 290
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.2.5-2ubuntu1
Depends: libc6 (>= 2.34)
Breaks: liblzma2 (<< 5.1.1alpha+20110809-3~)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: https://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>

Package: libmagic-mgc
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 7128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: file
Version: 1:5.41-3ubuntu0.1
Replaces: libmagic1 (<< 1:5.28-4~)
Breaks: libmagic1 (<< 1:5.28-4~)
Description: File type determination library using "magic" numbers (compiled magic file)
 This package provides the compiled magic file "magic.mgc". It has
 been separated from libmagic1 in order to meet the multiarch
 requirements without breaking applications that expect this file
 at its absolute path.
Homepage: https://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>

Package: libmagic1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 229
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.41-3ubuntu0.1
Depends: libbz2-1.0, libc6 (>= 2.33), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.41-3ubuntu0.1)
Suggests: file
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.
Homepage: https://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>

Package: libmagickcore-6.q16-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6651
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.3ubuntu0.22.04.5
Depends: libbz2-1.0, libc6 (>= 2.35), libfftw3-double3 (>= 3.3.5), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgcc-s1 (>= 3.3.1), libgomp1 (>= 6), libheif1 (>= 1.4.0), libjbig0 (>= 2.0), libjpeg8 (>= 8c), liblcms2-2 (>= 2.6), liblqr-1-0 (>= 0.4.0), libltdl7 (>= 2.4.6), liblzma5 (>= 5.1.1alpha+20120614), libopenjp2-7 (>= 2.0.0), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libwebp7, libwebpdemux2, libwebpmux3, libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Recommends: ghostscript, gsfonts
Suggests: libmagickcore-6.q16-6-extra
Description: low-level image manipulation library -- quantum depth Q16
 The MagickCore API is a low-level interface between the C programming language
 and the ImageMagick image processing libraries and is recommended for
 wizard-level programmers only. Unlike the MagickWand C API which uses only a
 few opaque types and accessors, with MagickCore you almost exclusively access
 the structure members directly.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickCore.
 .
 This version of libmagickcore is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>

Package: libmagickcore-6.q16-6-extra
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 338
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.3ubuntu0.22.04.5
Provides: libmagickcore-6.q16-1-extra, libmagickcore-6.q16-2-extra, libmagickcore-6.q16-3-extra, libmagickcore-6.q16-4-extra, libmagickcore-6.q16-5-extra, libmagickcore-extra
Depends: libc6 (>= 2.35), libcairo2 (>= 1.6.0), libdjvulibre21 (>= 3.5.28), libglib2.0-0 (>= 2.12.0), libmagickcore-6.q16-6 (>= 8:6.9.11.24), libmagickwand-6.q16-6 (>= 8:6.9.10.2), libopenexr25 (>= 2.5.7), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.14.0), libwmflite-0.2-7 (>= 0.2.12), libxml2 (>= 2.7.4)
Recommends: libjxr-tools
Suggests: inkscape
Enhances: libmagickcore-6.q16-6
Description: low-level image manipulation library - extra codecs (Q16)
 This package adds support for SVG, WMF, OpenEXR, DjVu and Graphviz to
 MagickCore.
 .
 This version of libmagickcore-extra is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>

Package: libmagickwand-6.q16-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1344
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.3ubuntu0.22.04.5
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libmagickcore-6.q16-6 (>= 8:6.9.11.24), libx11-6, imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Description: image manipulation library -- quantum depth Q16
 The MagickWand API is the recommended interface between the C programming
 language and the ImageMagick image processing libraries. Unlike the
 MagickCore C API, MagickWand uses only a few opaque types. Accessors are
 available to set or get important wand properties.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickWand.
 .
 This version of libmagickwand is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>

Package: libmanette-0.2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 207
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmanette
Version: 0.2.6-3build1
Depends: libc6 (>= 2.4), libevdev2 (>= 1.4.5), libglib2.0-0 (>= 2.50.0), libgudev-1.0-0 (>= 146)
Description: Simple GObject game controller library
 libmanette is a library for using game controllers using an API inspired
 by GDK's device and event handling. It supports the W3C Draft Gamepad
 specification.
 .
 This package contains the shared libraries.
Homepage: https://gitlab.gnome.org/aplazas/libmanette
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libmariadb3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 582
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mariadb-10.6
Version: 1:10.6.22-0ubuntu0.22.04.1
Replaces: libmariadbclient18
Depends: mariadb-common, libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.1.4)
Breaks: libmariadbclient18
Conflicts: mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-5.1, mariadb-server-5.2, mariadb-server-5.3, mariadb-server-5.5
Description: MariaDB database client library
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the client library.
Homepage: https://mariadb.org/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: libmaxminddb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmaxminddb
Version: 1.5.2-1build2
Depends: libc6 (>= 2.33)
Suggests: mmdb-bin
Description: IP geolocation database library
 The libmaxminddb library provides a C library for reading MaxMind DB files,
 including the GeoIP2 databases from MaxMind. This is a custom binary format
 designed to facilitate fast lookups of IP addresses while allowing for great
 flexibility in the type of data associated with an address.
 .
 The MaxMind DB format is an open format. The spec is available at
 http://maxmind.github.io/MaxMind-DB/. This spec is licensed under the Creative
 Commons Attribution-ShareAlike 3.0 Unported License.
Homepage: https://maxmind.github.io/libmaxminddb/
Original-Maintainer: Faidon Liambotis <paravoid@debian.org>

Package: libmd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmd
Version: 1.0.4-1build1
Depends: libc6 (>= 2.33)
Description: message digest functions from BSD systems - shared library
 The libmd library provides various message digest ("hash") functions,
 as found on various BSDs on a library with the same name and with a
 compatible API.
Homepage: https://www.hadrons.org/software/libmd/
Original-Maintainer: Guillem Jover <guillem@debian.org>

Package: libmecab2
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 858
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mecab
Version: 0.996-14build9
Config-Version: 0.996-14build9
Replaces: libmecab1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Breaks: libmecab1
Conflicts: libmecab1
Conffiles:
 /etc/mecabrc 725f8b0baaf5e2de88d057c9bb17c8f3
Description: Libraries of Mecab
 This package provides runtime libraries of Mecab, that is a Japanese
 morphological analysis system.
Original-Maintainer: Natural Language Processing (Japanese) <team+pkg-nlp-ja@tracker.debian.org>
Homepage: https://taku910.github.io/mecab/

Package: libmnl0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.4-3build2
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: https://netfilter.org/projects/libmnl/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 382
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Suggests: cryptsetup-bin
Description: device mounting library
 This device mounting library is used by mount and umount helpers.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: libmp3lame0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 314
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lame
Version: 3.100-3build2
Depends: libc6 (>= 2.29)
Description: MP3 encoding library
 LAME (recursive acronym for "LAME Ain't an MP3 Encoder") is a research
 project for learning about and improving MP3 encoding technology.
 LAME includes an MP3 encoding library, a simple frontend application,
 and other tools for sound analysis, as well as convenience tools.
 .
 This package contains the shared library.
Homepage: http://lame.sourceforge.net/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libmpc3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 125
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpclib3
Version: 1.2.1-2build1
Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.2.1+dfsg), libmpfr6 (>= 4.0.0)
Description: multiple precision complex floating-point library
 MPC is a portable library written in C for arbitrary precision
 arithmetic on complex numbers providing correct rounding. For the time
 being, it contains all arithmetic operations over complex numbers, the
 exponential and the logarithm functions, the trigonometric and
 hyperbolic functions.
 .
 Ultimately, it should implement a multiprecision equivalent of the ISO
 C99 standard.
 .
 It builds upon the GNU MP and the MPFR libraries.
Homepage: http://www.multiprecision.org/mpc/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libmpdec3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 250
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpdecimal
Version: 2.5.1-2build2
Depends: libc6 (>= 2.32), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Breaks: libpython3.8-stdlib (<< 2.8.5-2)
Description: library for decimal floating point arithmetic (runtime library)
 mpdecimal is a package for correctly-rounded arbitrary precision decimal
 floating point arithmetic.
Homepage: https://www.bytereef.org/mpdecimal/index.html
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libmpfr6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3405
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpfr4
Version: 4.1.0-3build3
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg)
Breaks: libgmp3 (<< 4.1.4-3), libmpc3 (<< 1.1.0-1~)
Description: multiple precision floating-point computation
 MPFR provides a library for multiple-precision floating-point computation
 with correct rounding.  The computation is both efficient and has a
 well-defined semantics. It copies the good ideas from the
 ANSI/IEEE-754 standard for double-precision floating-point arithmetic
 (53-bit mantissa).
Homepage: https://www.mpfr.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libmpg123-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 400
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpg123
Version: 1.29.3-1ubuntu0.1
Depends: libc6 (>= 2.29)
Description: MPEG layer 1/2/3 audio decoder (shared library)
 mpg123 is a real time MPEG 1.0/2.0/2.5 audio player/decoder for layers
 1, 2 and 3 (MPEG 1.0 layer 3 also known as MP3).
 .
 This package contains the C libraries needed to run executables that use
 the mpg123 library.
Homepage: http://mpg123.org/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libmspack0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmspack
Version: 0.10.1-2build2
Depends: libc6 (>= 2.14)
Description: library for Microsoft compression formats (shared library)
 The purpose of libmspack is to provide both compression and decompression of
 some loosely related file formats used by Microsoft. The intention is to
 support all of the following formats: COMPRESS.EXE [SZDD],
 Microsoft Help (.HLP), COMPRESS.EXE [KWAJ], Microsoft Cabinet (.CAB),
 HTML Help (.CHM), Microsoft eBook (.LIT), Windows Imaging Format (.WIM),
 Exchange Offline Address Book (.LZX).
Homepage: https://www.cabextract.org.uk/libmspack/
Original-Maintainer: Marc Dequènes (Duck) <Duck@DuckCorp.org>

Package: libmysqlclient21
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6733
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mysql-8.0
Version: 8.0.44-0ubuntu0.22.04.2
Depends: mysql-common (>= 5.5), libc6 (>= 2.34), libgcc-s1 (>= 3.4), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 11), libzstd1 (>= 1.4.0)
Description: MySQL database client library
 MySQL is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MySQL are speed, robustness and
 ease of use.
 .
 This package includes the client library.
Homepage: http://dev.mysql.com/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: libncurses-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2351
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Replaces: libncurses5-dev (<< 6.1+20180210), libncursesw5-dev (<< 6.1+20180210), libtinfo-dev (<< 6.1+20180210), ncurses-bin (<< 6.0+20151017), ncurses-dev
Provides: libncurses5-dev (= 6.3-2ubuntu0.1), libncursesw5-dev (= 6.3-2ubuntu0.1), libtinfo-dev (= 6.3-2ubuntu0.1), ncurses-dev
Depends: libtinfo6 (= 6.3-2ubuntu0.1), libncurses6 (= 6.3-2ubuntu0.1), libncursesw6 (= 6.3-2ubuntu0.1), libc6-dev | libc-dev, ncurses-bin (>= 6.0+20151017)
Suggests: ncurses-doc
Breaks: libncurses5-dev (<< 6.1+20180210), libncursesw5-dev (<< 6.1+20180210), libtinfo-dev (<< 6.1+20180210)
Conflicts: ncurses-dev
Description: developer's libraries for ncurses
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the header files, static libraries
 and symbolic links that developers using ncurses will need.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libncurses6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 329
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Depends: libtinfo6 (= 6.3-2ubuntu0.1), libc6 (>= 2.34)
Recommends: libgpm2
Breaks: cowdancer (<< 0.89~)
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libncursesw6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 422
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Depends: libtinfo6 (= 6.3-2ubuntu0.1), libc6 (>= 2.34)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libnetfilter-conntrack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.0.9-1
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnfnetlink0
Description: Netfilter netlink-conntrack library
 libnetfilter_conntrack is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking state table.
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Homepage: https://www.netfilter.org/projects/libnetfilter_conntrack/

Package: libnetpbm10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 192
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: netpbm-free
Version: 2:10.0-15.4
Depends: libc6 (>= 2.33)
Description: Graphics conversion tools shared libraries
 This package contains the shared libraries used by netpbm.
Original-Maintainer: Andreas Barth <aba@not.so.argh.org>
Homepage: http://netpbm.alioth.debian.org

Package: libnetplan0
Status: install ok installed
Priority: important
Section: net
Installed-Size: 328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: netplan.io
Version: 0.106.1-7ubuntu0.22.04.4
Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.70.0), libuuid1 (>= 2.16), libyaml-0-2
Description: YAML network configuration abstraction runtime library
 netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package contains the necessary runtime library files.
Homepage: https://netplan.io/
Original-Maintainer: Debian Netplan Maintainers <team+netplan@tracker.debian.org>

Package: libnettle8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 356
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.7.3-1build2
Depends: libc6 (>= 2.17)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>

Package: libnewt0.52
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 200
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: newt
Version: 0.52.21-5ubuntu2
Depends: libc6 (>= 2.34), libslang2 (>= 2.2.4)
Recommends: libfribidi0
Conffiles:
 /etc/newt/palette.original d41d8cd98f00b204e9800998ecf8427e
 /etc/newt/palette.ubuntu ac72ec93d29d94ad06bb3180f16cefb1
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.
Homepage: https://pagure.io/newt
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: libnfnetlink0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.1-3build3
Depends: libc6 (>= 2.14)
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.
Original-Maintainer: Alexander Wirt <formorer@debian.org>

Package: libnftables1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 913
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nftables
Version: 1.0.2-1ubuntu3
Depends: libc6 (>= 2.33), libgmp10 (>= 2:6.2.1+dfsg), libjansson4 (>= 2.3), libmnl0 (>= 1.0.3-4~), libnftnl11 (>= 1.2.1), libxtables12 (>= 1.6.0+snapshot20161117)
Description: Netfilter nftables high level userspace API library
 This library provides high level semantics to interact with the nftables
 framework by Netfilter project.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
 .
 This package contains the libnftables library.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>

Package: libnftnl11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 227
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnftnl
Version: 1.2.1-1build1
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~)
Description: Netfilter nftables userspace API library
 libnftnl is the low-level library for Netfilter 4th generation
 framework nftables.
 .
 Is the user-space library for low-level interaction with
 nftables Netlink's API over libmnl.
Homepage: https://git.netfilter.org/libnftnl
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>

Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 204
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nghttp2
Version: 1.43.0-1ubuntu0.2
Depends: libc6 (>= 2.17)
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>

Package: libnghttp2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 533
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1ubuntu0.2
Replaces: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Depends: libnghttp2-14 (= 1.43.0-1ubuntu0.2), pkg-config
Suggests: libnghttp2-doc
Conflicts: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Description: library implementing HTTP/2 protocol (development files)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs development files.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>

Package: libnl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.5.0-0.1
Depends: libc6 (>= 2.34)
Conffiles:
 /etc/libnl-3/classid 3e07259e58674631830b152e983ca995
 /etc/libnl-3/pktloc 7613dbc41b2dc3258195b6b6abd0f179
Description: library for dealing with netlink sockets
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
Original-Maintainer: Heiko Stuebner <mmind@debian.org>
Homepage: http://www.infradead.org/~tgr/libnl/

Package: libnl-3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 623
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.5.0-0.1
Replaces: libnl3-dev
Depends: libnl-3-200 (= 3.5.0-0.1)
Breaks: libnl3-dev
Conflicts: libnl-dev, libnl2-dev
Description: development library and headers for libnl-3
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 This package contains the headers needed by all libraries and the  files
 that are needed to build applications using libnl3.
Original-Maintainer: Heiko Stuebner <mmind@debian.org>
Homepage: http://www.infradead.org/~tgr/libnl/

Package: libnl-genl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.5.0-0.1
Depends: libnl-3-200 (= 3.5.0-0.1), libc6 (>= 2.4)
Description: library for dealing with netlink sockets - generic netlink
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the generic netlink protocol, an extended version of the netlink
 protocol.
Original-Maintainer: Heiko Stuebner <mmind@debian.org>
Homepage: http://www.infradead.org/~tgr/libnl/

Package: libnl-route-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 583
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.5.0-0.1
Depends: libnl-3-200 (= 3.5.0-0.1), libc6 (>= 2.34)
Description: library for dealing with netlink sockets - route interface
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the configuration interfaces of the NETLINK_ROUTE family.
Original-Maintainer: Heiko Stuebner <mmind@debian.org>
Homepage: http://www.infradead.org/~tgr/libnl/

Package: libnl-route-3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1122
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.5.0-0.1
Depends: libnl-3-dev (= 3.5.0-0.1), libnl-route-3-200 (= 3.5.0-0.1)
Description: development library and headers for libnl-route-3
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 This package contains the files that are needed to build applications using
 libnl-route-3.
Original-Maintainer: Heiko Stuebner <mmind@debian.org>
Homepage: http://www.infradead.org/~tgr/libnl/

Package: libnpth0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: npth
Version: 1.6-3build2
Depends: libc6 (>= 2.34)
Description: replacement for GNU Pth using system threads
 nPth is a non-preemptive threads implementation using an API very
 similar to the one known from GNU Pth. It has been designed as a
 replacement of GNU Pth for non-ancient operating systems. In
 contrast to GNU Pth it is based on the system's standard threads
 implementation. Thus nPth allows the use of libraries which are not
 compatible to GNU Pth.
Homepage: https://www.gnupg.org/
Original-Maintainer: Eric Dorland <eric@debian.org>

Package: libnsl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 347
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnsl
Version: 1.3.0-2build2
Replaces: libc6-dev (<< 2.31-4)
Depends: libnsl2 (= 1.3.0-2build2), libtirpc-dev
Breaks: libc6-dev (<< 2.31-4)
Description: libnsl development files
 This package contains the files needed for developing applications that
 use libnsl.
Homepage: https://github.com/thkukuk/libnsl
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libnsl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnsl
Version: 1.3.0-2build2
Depends: libc6 (>= 2.33), libtirpc3 (>= 1.0.2)
Description: Public client interface for NIS(YP) and NIS+
 This package contains the libnsl library, which contains the public client
 interface for NIS(YP) and NIS+. This code was formerly part of glibc, but is
 now standalone to be able to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnsl
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libnspr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 314
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nspr
Version: 2:4.35-0ubuntu0.22.04.1
Depends: libc6 (>= 2.34)
Description: NetScape Portable Runtime Library
 This library provides platform independent non-GUI operating system
 facilities including:
  * threads,
  * thread synchronisation,
  * normal file I/O and network I/O,
  * interval timing and calendar time,
  * basic memory management (malloc and free),
  * shared library linking.
Homepage: http://www.mozilla.org/projects/nspr/
Original-Maintainer: Maintainers of Mozilla-related packages <team+pkg-mozilla@tracker.debian.org>

Package: libnspr4-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: nspr
Version: 2:4.35-0ubuntu0.22.04.1
Depends: libnspr4 (>= 2:4.35), libnspr4 (<= 2:4.35-0ubuntu0.22.04.1.1~)
Breaks: libxmlsec1-dev (<= 1.2.33-1)
Description: Development files for the NetScape Portable Runtime library
 This library provides platform independent non-GUI operating system
 facilities including:
  * threads,
  * thread synchronisation,
  * normal file I/O and network I/O,
  * interval timing and calendar time,
  * basic memory management (malloc and free),
  * shared library linking.
 .
 Install this package if you wish to develop your own programs using the
 NetScape Portable Runtime library.
Homepage: http://www.mozilla.org/projects/nspr/
Original-Maintainer: Maintainers of Mozilla-related packages <team+pkg-mozilla@tracker.debian.org>

Package: libnss-nis
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 3.1-0ubuntu6
Replaces: libc6 (<< 2.32)
Depends: libc6 (>= 2.14), libnsl2 (>= 1.0)
Breaks: libc6 (<< 2.32)
Description: NSS module for using NIS as a naming service
 This package provides a Name Service Switch that allows your NIS server
 act as a name service. This means providing user account information,
 group id's, host information, aliases, netgroups, and basically anything
 else that you would normally get from /etc flat files.
 .
 This module was formerly part of glibc, but is now standalone to be able
 to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnss_nis
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libnss-nisplus
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.3-0ubuntu6
Replaces: libc6 (<< 2.32)
Depends: libc6 (>= 2.14), libnsl2 (>> 1.3.0), libnsl2 (<< 1.3.1), libtirpc3 (>= 1.0.2)
Breaks: libc6 (<< 2.32)
Description: NSS module for using NIS+ as a naming service
 This package provides a Name Service Switch that allows your NIS+ server
 act as a name service. This means providing user account information,
 group id's, host information, aliases, netgroups, and basically anything
 else that you would normally get from /etc flat files.
 .
 This module was formerly part of glibc, but is now standalone to be able
 to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnss_nisplus
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libnss-systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 491
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 249.11-0ubuntu3.17
Depends: libc6 (>= 2.34), systemd (= 249.11-0ubuntu3.17)
Description: nss module providing dynamic user and group name resolution
 nss-systemd is a plug-in module for the GNU Name Service Switch (NSS)
 functionality of the GNU C Library (glibc), providing UNIX user and group name
 resolution for dynamic users and groups allocated through the DynamicUser=
 option in systemd unit files. See systemd.exec(5) for details on this
 option.
 .
 Installing this package automatically adds the module to /etc/nsswitch.conf.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libnss3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4007
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nss
Version: 2:3.98-0ubuntu0.22.04.2
Depends: libc6 (>= 2.34), libnspr4 (>= 2:4.34), libsqlite3-0 (>= 3.5.9)
Conflicts: libnss3-1d (<< 2:3.13.4-2)
Description: Network Security Service libraries
 This is a set of libraries designed to support cross-platform development
 of security-enabled client and server applications. It can support SSLv2
 and  v4, TLS, PKCS #5, #7, #11, #12, S/MIME, X.509 v3 certificates and
 other security standards.
Homepage: http://www.mozilla.org/projects/security/pki/nss/
Original-Maintainer: Maintainers of Mozilla-related packages <team+pkg-mozilla@tracker.debian.org>

Package: libnss3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1468
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nss
Version: 2:3.98-0ubuntu0.22.04.2
Depends: libnss3 (= 2:3.98-0ubuntu0.22.04.2), libnspr4-dev (>= 4.6.6-1)
Description: Development files for the Network Security Service libraries
 This is a set of libraries designed to support cross-platform development
 of security-enabled client and server applications. It can support SSLv2
 and  v4, TLS, PKCS #5, #7, #11, #12, S/MIME, X.509 v3 certificates and
 other security standards.
 .
 Install this package if you wish to develop your own programs using the
 Network Security Service Libraries.
Homepage: http://www.mozilla.org/projects/security/pki/nss/
Original-Maintainer: Maintainers of Mozilla-related packages <team+pkg-mozilla@tracker.debian.org>

Package: libntfs-3g89
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 371
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ntfs-3g
Version: 1:2021.8.22-3ubuntu1.2
Depends: libc6 (>= 2.33)
Description: read/write NTFS driver for FUSE (runtime library)
 NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS
 filesystem used by Microsoft Windows.
 .
 This package contains the actual library.
Homepage: https://github.com/tuxera/ntfs-3g/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libnuma-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 157
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: numactl
Version: 2.0.14-3ubuntu2
Depends: libnuma1 (= 2.0.14-3ubuntu2), libc6-dev | libc-dev
Description: Development files for libnuma
 Library to control specific NUMA (Non-Uniform Memory Architecture)
 scheduling or memory placement policies.  This package contains
 headers and manual pages relating to the library.
Homepage: https://github.com/numactl/numactl
Original-Maintainer: Ian Wienand <ianw@debian.org>

Package: libnuma1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: numactl
Version: 2.0.14-3ubuntu2
Depends: libc6 (>= 2.33)
Description: Libraries for controlling NUMA policy
 Library to control specific NUMA (Non-Uniform Memory Architecture)
 scheduling or memory placement policies.
Homepage: https://github.com/numactl/numactl
Original-Maintainer: Ian Wienand <ianw@debian.org>

Package: libogg0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libogg
Version: 1.3.5-0ubuntu3
Depends: libc6 (>= 2.14)
Description: Ogg bitstream library
 Libogg is a library for manipulating ogg bitstreams.  It handles
 both making ogg bitstreams and getting packets from ogg bitstreams.
Homepage: http://xiph.org/ogg/
Original-Maintainer: Ron Lee <ron@debian.org>

Package: libonig5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 615
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libonig
Version: 6.9.7.1-2build1
Depends: libc6 (>= 2.14)
Description: regular expressions library
 Oniguruma is a library for working with regular expressions.
 .
 Different character encoding for every regular expression object can
 be specified.
Homepage: https://github.com/kkos/oniguruma
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>

Package: libopenexr25
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3068
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openexr
Version: 2.5.7-1
Replaces: libopenexr23 (= 2.3.0-3)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libilmbase25 (>= 2.5.7), libstdc++6 (>= 11), zlib1g (>= 1:1.2.0)
Breaks: libopenexr23 (= 2.3.0-3)
Description: runtime files for the OpenEXR image library
 OpenEXR is a high dynamic-range (HDR) image file format developed by
 Industrial Light & Magic for use in computer imaging applications.
 .
 OpenEXR's features include:
    * Higher dynamic range and colour precision than existing 8- and
      10-bit image file formats.
    * Support for the "half" 16-bit floating-point pixel format.
    * Multiple lossless image compression algorithms. Some of the
      included codecs can achieve 2:1 lossless compression ratios on
      images with film grain.
    * Extensibility. New compression codecs and image types can easily
      be added by extending the C++ classes included in the OpenEXR
      software distribution. New image attributes (strings, vectors,
      integers, etc.) can be added to OpenEXR image headers without
      affecting backward compatibility with existing OpenEXR
      applications.
 .
 This package contains the following shared library:
    * IlmImf - a library that reads and writes OpenEXR images.
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Homepage: http://www.openexr.com

Package: libopenjp2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 408
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openjpeg2
Version: 2.4.0-6ubuntu0.4
Depends: libc6 (>= 2.34)
Description: JPEG 2000 image compression/decompression library
 OpenJPEG is a library for handling the JPEG 2000 image compression format.
 JPEG 2000 is a wavelet-based image compression standard and permits progressive
 transmission by pixel and resolution accuracy for progressive downloads of an
 encoded image. It supports lossless and lossy compression, supports higher
 compression than JPEG 1991, and has resilience to errors in the image.
 .
 This package contains the runtime files for openjpeg 2.x
Homepage: https://www.openjpeg.org
Original-Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>

Package: libopenmpi-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 9117
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openmpi
Version: 4.1.2-2ubuntu1
Depends: gfortran-11 | gfortran-mod-15, libopenmpi3 (= 4.1.2-2ubuntu1), openmpi-common (>= 4.1.2-2ubuntu1), libibverbs-dev (>= 1.1.7), libhwloc-dev, libevent-dev, libpmix-dev, libjs-jquery, libjs-jquery-ui, zlib1g-dev, openmpi-bin (>= 3.0.0-1)
Recommends: libcoarrays-openmpi-dev
Suggests: openmpi-doc
Breaks: lam4-dev (<< 7.1.4-4), openmpi-doc (<< 4.1.2~rc1-4)
Conflicts: libopenmpi-dev
Description: high performance message passing library -- header files
 Open MPI is a project combining technologies and resources from several other
 projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in order to build the best
 MPI library available. A completely new MPI-3 compliant implementation, Open
 MPI offers advantages for system and software vendors, application developers
 and computer science researchers.
 .
 This package contains the header files and compiler wrappers which are needed
 to compile and link programs against libopenmpi.
Homepage: https://www.open-mpi.org/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: libopenmpi3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 9760
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openmpi
Version: 4.1.2-2ubuntu1
Depends: libc6 (>= 2.34), libevent-core-2.1-7 (>= 2.1.8-stable), libevent-pthreads-2.1-7 (>= 2.1.8-stable), libfabric1 (>= 1.11.0), libgcc-s1 (>= 3.3.1), libhwloc15 (>= 2.7.0), libibverbs1 (>= 1.1.7), libnl-3-200 (>= 3.2.7), libpmix2 (>= 4.1.2), libpsm-infinipath1 (>= 3.3+7.gec1d6d2), libpsm2-2 (>= 10.3-37), libstdc++6 (>= 5), libucx0 (>= 1.12.1~rc2), zlib1g (>= 1:1.2.0), libhwloc-plugins
Breaks: gromacs-openmpi (<< 2020~beta2-2), libeztrace0 (<< 1.1-8-5+b1), starpu-contrib-examples (<< 1.3.2+dfsg-2+b1), starpu-examples (<< 1.3.2+dfsg-4+b1)
Description: high performance message passing library -- shared library
 Open MPI is a project combining technologies and resources from several other
 projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in order to build the best
 MPI library available. A completely new MPI-3.1 compliant implementation, Open
 MPI offers advantages for system and software vendors, application developers
 and computer science researchers.
 .
 This package contains the Open MPI shared libraries.
Homepage: https://www.open-mpi.org/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: libopus0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 392
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: opus
Version: 1.3.1-0.1build2
Depends: libc6 (>= 2.29)
Suggests: opus-tools
Description: Opus codec runtime library
 The Opus codec is designed for interactive speech and audio transmission over
 the Internet. It is designed by the IETF Codec Working Group and incorporates
 technology from Skype's SILK codec and Xiph.Org's CELT codec.
 .
 It is intended to suit a wide range of interactive audio applications,
 including Voice over IP, videoconferencing, in-game chat, and even remote live
 music performances.  It can scale from low bit-rate narrowband speech to very
 high quality stereo music. The current features are:
 .
  Bit-rates from 6 kb/s 510 kb/s
  Sampling rates from 8 to 48 kHz
  Frame sizes from 2.5 ms to 60 ms
  Support for both constant bit-rate (CBR) and variable bit-rate (VBR)
  Audio bandwidth from narrowband to full-band
  Support for speech and music
  Support for mono and stereo
  Support for up to 255 channels (multistream frames)
  Dynamically adjustable bitrate, audio bandwidth, and frame size
  Good loss robustness and packet loss concealment (PLC)
  Floating point and fixed-point implementation
 .
 This package provides the Opus runtime library.
Homepage: http://www.opus-codec.org
Original-Maintainer: Ron Lee <ron@debian.org>

Package: liborc-0.4-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1085
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: orc
Version: 1:0.4.32-2ubuntu0.1
Depends: libc6 (>= 2.14)
Description: Library of Optimized Inner Loops Runtime Compiler
 Orc is a library and set of tools for compiling and executing
 very simple programs that operate on arrays of data.  The "language"
 is a generic assembly language that represents many of the features
 available in SIMD architectures, including saturated addition and
 subtraction, and many arithmetic operations.
 .
 This package contains the orc shared libraries.  It is typically
 installed automatically when an application or library requires it.
Homepage: https://cgit.freedesktop.org/gstreamer/orc
Original-Maintainer: Maintainers of GStreamer packages <orc@packages.debian.org>

Package: libp11-kit-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.24.0-6build1
Depends: libp11-kit0 (= 0.24.0-6build1)
Suggests: p11-kit-doc
Description: library for loading and coordinating access to PKCS#11 modules - development
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the development headers required
 to build applications using the p11-kit library.
Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libp11-kit0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1292
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.24.0-6build1
Depends: libc6 (>= 2.34), libffi8 (>= 3.4)
Breaks: opencryptoki (<= 3.6.1+dfsg-1)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libpackagekit-glib2-18
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 463
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: packagekit
Version: 1.2.5-2ubuntu3
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.54)
Recommends: packagekit (= 1.2.5-2ubuntu3)
Description: Library for accessing PackageKit using GLib
 PackageKit allows performing simple software management tasks over a DBus
 interface e.g. refreshing the cache, updating, installing and removing
 software packages or searching for multimedia codecs and file handlers.
 .
 This package provides an advanced library to access PackageKit using GLib.
 It makes use of only async D-Bus calls and provides high level tasks which
 peform the "transaction dance".
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <mak@debian.org>

Package: libpam-cap
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcap2
Version: 1:2.44-1ubuntu0.22.04.2
Replaces: libcap2-bin (<< 1:2.22-1.1)
Depends: libc6 (>= 2.4), libcap2 (>= 1:2.33), libpam0g (>= 0.99.7.1), libpam-runtime (>= 1.1.3-2~)
Breaks: libcap2-bin (<< 1:2.22-1.1)
Conffiles:
 /etc/security/capability.conf fa5804a90b16addeec23008102b4746d
Description: POSIX 1003.1e capabilities (PAM module)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the PAM module for enforcing capabilities on users and
 groups at PAM session start time.
Homepage: https://sites.google.com/site/fullycapable/
Original-Maintainer: Christian Kastner <ckk@debian.org>

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.4.0-11ubuntu2.6
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.3.0), libdb5.3, libnsl2 (>= 1.0), libpam0g (>= 1.3.2), libselinux1 (>= 3.1~), libtirpc3 (>= 1.0.2), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.4.0-11ubuntu2.6)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf dc21d0fd769d655b311d785670e5c6ae
 /etc/security/faillock.conf 164da8ffb87f3074179bc60b71d0b99f
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 38dce56af34daf316b901d465769a137
 /etc/security/namespace.conf 6b3796403421d66db7defc46517711bc
 /etc/security/namespace.init 260eb0c3368ffaaf861e003e27618476
 /etc/security/pam_env.conf 89cc8702173d5cd51abc152ae9f8d6bc
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 249
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.4.0-11ubuntu2.6
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.3.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 312
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.4.0-11ubuntu2.6
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libpam-systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 649
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 249.11-0ubuntu3.17
Provides: default-logind (= 249.11-0ubuntu3.17), logind (= 249.11-0ubuntu3.17)
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.24-9~), libpam0g (>= 0.99.7.1), systemd (= 249.11-0ubuntu3.17), libpam-runtime (>= 1.0.1-6), default-dbus-system-bus | dbus-system-bus, systemd-sysv
Description: system and service manager - PAM module
 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy for logind.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.4.0-11ubuntu2.6
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libpango-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 563
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.6+ds-2ubuntu1
Depends: fontconfig (>= 2.13.0), libc6 (>= 2.14), libfribidi0 (>= 1.0.6), libglib2.0-0 (>= 2.67.3), libharfbuzz0b (>= 2.6.0), libthai0 (>= 0.1.25)
Breaks: libpangocairo-1.0-0 (<< 1.44.7), libpangoft2-1.0-0 (<< 1.44.7), libpangoxft-1.0-0 (<< 1.44.7)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libpangocairo-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.6+ds-2ubuntu1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.12.10), libfontconfig1 (>= 2.13.0), libglib2.0-0 (>= 2.62.0), libharfbuzz0b (>= 2.6.0), libpango-1.0-0 (= 1.50.6+ds-2ubuntu1), libpangoft2-1.0-0 (= 1.50.6+ds-2ubuntu1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libpangoft2-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.6+ds-2ubuntu1
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.67.3), libharfbuzz0b (>= 2.6.0), libpango-1.0-0 (= 1.50.6+ds-2ubuntu1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libpaper-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libpaper
Version: 1.1.28build2
Replaces: libpaper1 (<< 1.1.10), libpaperg (<< 1.1.9)
Depends: libc6 (>= 2.34), libpaper1
Description: library for handling paper characteristics (utilities)
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.
 .
 This package contains utilities for setting the system's default
 paper type and for accessing paper type information from shell
 scripts.
Original-Maintainer: Giuseppe Sacco <eppesuig@debian.org>

Package: libpaper1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpaper
Version: 1.1.28build2
Replaces: libpaperg (<< 1.1.9)
Provides: libpaperg
Depends: libc6 (>= 2.33), debconf (>= 0.5) | debconf-2.0, ucf (>= 0.28), dpkg (>= 1.17.2)
Recommends: libpaper-utils
Description: library for handling paper characteristics
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.
Original-Maintainer: Giuseppe Sacco <eppesuig@debian.org>

Package: libparted2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 458
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: parted
Version: 3.4-2build1
Provides: libparted
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97), libuuid1 (>= 2.16), dmidecode
Suggests: parted, libparted-dev, libparted-i18n (= 3.4-2build1)
Description: disk partition manipulator - shared library
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/parted
Original-Maintainer: Parted Maintainer Team <parted-maintainers@alioth-lists.debian.net>

Package: libpcap0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 357
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpcap
Version: 1.10.1-4ubuntu1.22.04.1
Replaces: libpcap0.8-dev (<< 1.0.0-2)
Depends: libc6 (>= 2.33), libdbus-1-3 (>= 1.9.14)
Description: system interface for user-level packet capture
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, the libpcap authors created this system-independent API
 to ease in porting and to alleviate the need for several
 system-dependent packet capture modules in each application.
Homepage: https://www.tcpdump.org/
Original-Maintainer: Romain Francoise <rfrancoise@debian.org>

Package: libpci3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pciutils
Version: 1:3.7.0-6
Depends: libc6 (>= 2.34), libudev1 (>= 196), zlib1g (>= 1:1.1.4), pci.ids (>= 0.0~2019.11.10-2)
Description: PCI utilities (shared library)
 This package contains the libpci shared library files.
 .
 The libpci library provides portable access to configuration
 registers of devices connected to the PCI bus.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://mj.ucw.cz/sw/pciutils/

Package: libpciaccess0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpciaccess
Version: 0.16-3
Depends: libc6 (>= 2.33), zlib1g (>= 1:1.1.4)
Suggests: pciutils
Description: Generic PCI access library for X
 Provides functionality for X to access the PCI bus and devices
 in a platform-independent way.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libpcre2-8-0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 648
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.42-3+ubuntu22.04.1+deb.sury.org+1
Depends: libc6 (>= 2.14)
Description: New Perl Compatible Regular Expression Library- 8 bit runtime files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the 8 bit runtime library, which operates on
 ASCII and UTF-8 input.
Homepage: https://pcre.org/

Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 591
Maintainer: Perl 5 Compatible Regular Expression Library <pcre3@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.45-1+ubuntu22.04.1+deb.sury.org+1
Depends: libc6 (>= 2.14)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.

Package: libpcsclite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pcsc-lite
Version: 1.9.5-3ubuntu1
Depends: libc6 (>= 2.33)
Suggests: pcscd (= 1.9.5-3ubuntu1)
Breaks: libpcsclite-dev (<< 1.9.5-3ubuntu1), pcscd (<< 1.9.5-3ubuntu1)
Description: Middleware to access a smart card using PC/SC (library)
 The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
 in a very small form factor for communicating to smartcards and
 readers.
 .
 The PC/SC Lite library is used to connect to the PC/SC daemon from
 a client application and provide access to the desired reader.
Homepage: https://pcsclite.apdu.fr/
Original-Maintainer: Ludovic Rousseau <rousseau@debian.org>

Package: libperl5.34
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 28448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.34.0-3ubuntu1.5
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.101), libcompress-raw-zlib-perl (<< 2.101), libcompress-zlib-perl (<< 2.102), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.08), libio-compress-base-perl (<< 2.102), libio-compress-bzip2-perl (<< 2.102), libio-compress-perl (<< 2.102), libio-compress-zlib-perl (<< 2.102), libmime-base64-perl (<< 3.16), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 3.23), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.26), libthreads-shared-perl (<< 1.62), libtime-hires-perl (<< 1.9767), libtime-piece-perl (<< 1.3401), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Depends: libbz2-1.0, libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), libdb5.3, libgdbm-compat4 (>= 1.18-3), libgdbm6 (>= 1.18-3), zlib1g (>= 1:1.2.2.3), perl-modules-5.34 (>= 5.34.0-3ubuntu1.5)
Suggests: sensible-utils
Breaks: libcompress-raw-bzip2-perl (<< 2.101), libcompress-raw-zlib-perl (<< 2.101), libcompress-zlib-perl (<< 2.102), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.08), libfilter-perl (<< 1.60), libio-compress-base-perl (<< 2.102), libio-compress-bzip2-perl (<< 2.102), libio-compress-perl (<< 2.102), libio-compress-zlib-perl (<< 2.102), libmime-base64-perl (<< 3.16), libstorable-perl (<< 3.23), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.26), libthreads-shared-perl (<< 1.62), libtime-hires-perl (<< 1.9767), libtime-piece-perl (<< 1.3401)
Description: shared Perl library
 This package contains the shared Perl library, used by applications
 which embed a Perl interpreter.
 .
 It also contains the architecture-dependent parts of the standard
 library (and depends on perl-modules-5.34 which contains the
 architecture-independent parts).
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: libpipeline1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 68
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpipeline
Version: 1.5.5-1
Depends: libc6 (>= 2.26)
Description: Unix process pipeline manipulation library
 This is a C library for setting up and running pipelines of processes,
 without needing to involve shell command-line parsing which is often
 error-prone and insecure.
Homepage: https://nongnu.org/libpipeline/

Package: libpipewire-0.3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 938
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pipewire
Version: 0.3.48-1ubuntu3
Depends: libspa-0.2-modules (= 0.3.48-1ubuntu3), libc6 (>= 2.34)
Recommends: pipewire (= 0.3.48-1ubuntu3), libpipewire-0.3-common
Description: libraries for the PipeWire multimedia server
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
Homepage: https://pipewire.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@alioth-lists.debian.net>

Package: libpipewire-0.3-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: pipewire
Version: 0.3.48-1ubuntu3
Description: libraries for the PipeWire multimedia server - common files
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package is needed for the runtime libraries to display messages in
 languages other than English.
Homepage: https://pipewire.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@alioth-lists.debian.net>

Package: libpipewire-0.3-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2406
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pipewire
Version: 0.3.48-1ubuntu3
Replaces: pipewire (<< 0.3.5)
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.34), libcanberra0 (>= 0.2), libdbus-1-3 (>= 1.9.14), libpipewire-0.3-0 (= 0.3.48-1ubuntu3), libpulse0 (>= 11.1), libsndfile1 (>= 1.0.20), libssl3 (>= 3.0.0~~alpha1), libsystemd0, libx11-6 (>= 2:1.7.0), libxfixes3 (>= 1:6.0.0)
Breaks: pipewire (<< 0.3.5)
Description: libraries for the PipeWire multimedia server - modules
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package contains modules used by the PipeWire server and by clients,
 and should not normally be depended on directly. PipeWire clients should
 depend on the pipewire package instead.
Homepage: https://pipewire.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@alioth-lists.debian.net>

Package: libpixman-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 708
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pixman
Version: 0.40.0-1ubuntu0.22.04.1
Depends: libc6 (>= 2.29)
Description: pixel-manipulation library for X and cairo
 A library for manipulating pixel regions -- a set of Y-X banded
 rectangles, image compositing using the Porter/Duff model
 and implicit mask generation for geometric primitives including
 trapezoids, triangles, and rectangles.
Homepage: http://pixman.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libplymouth5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 419
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: plymouth
Version: 0.9.5+git20211018-1ubuntu3
Replaces: plymouth (<< 0.9.2-1~)
Depends: libc6 (>= 2.34), libpng16-16 (>= 1.6.2-1), libudev1 (>= 183)
Breaks: plymouth (<< 0.9.2-1~)
Description: graphical boot animation and logger - shared libraries
 Plymouth is an application that runs very early in the boot process
 (even before the root filesystem is mounted!) that provides a graphical
 boot animation while the boot process happens in the background.
 .
 This package contains the shared libraries.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: libpmix-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 4640
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pmix
Version: 4.1.2-2ubuntu1
Replaces: libpmix2 (<< 4.1.0~rc1-1)
Depends: libpmix2 (= 4.1.2-2ubuntu1), libevent-dev, libhwloc-dev, zlib1g-dev
Breaks: libpmix2 (<< 4.1.0~rc1-1)
Description: Development files for the PMI Exascale library
 This is the OpenMPI implementation of the Process Management Interface (PMI)
 Exascale API. PMIx aims to retain transparent compatibility with the existing
 PMI-1 and PMI-2 definitions, and any future PMI releases; Support
 the Instant On initiative for rapid startup of applications at exascale
 and beyond.
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Homepage: https://github.com/pmix/pmix

Package: libpmix2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1912
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pmix
Version: 4.1.2-2ubuntu1
Replaces: libopenmpi3 (<< 4.1.0-3), libpmix-dev (<< 3.2.0~rc1-2)
Depends: libc6 (>= 2.34), libcurl3-gnutls (>= 7.16.2), libevent-core-2.1-7 (>= 2.1.8-stable), libevent-pthreads-2.1-7 (>= 2.1.8-stable), libhwloc15 (>= 2.7.0), zlib1g (>= 1:1.2.0), libhwloc-plugins
Breaks: libopenmpi3 (<< 4.1.0-3), libpmix-dev (<< 3.2.0~rc1-2)
Description: Process Management Interface (Exascale) library
 This is the OpenMPI implementation of the Process Management Interface (PMI)
 Exascale API. PMIx aims to retain transparent compatibility with the existing
 PMI-1 and PMI-2 definitions, and any future PMI releases; Support
 the Instant On initiative for rapid startup of applications at exascale
 and beyond.
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Homepage: https://github.com/pmix/pmix

Package: libpng16-16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 353
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.37-3ubuntu0.1
Depends: libc6 (>= 2.29), zlib1g (>= 1:1.2.11)
Description: PNG library - runtime (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Maintainers of libpng1.6 packages <libpng1.6@packages.debian.org>

Package: libpolkit-agent-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 0.105-33
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (= 0.105-33)
Description: PolicyKit Authentication Agent API
 PolicyKit is a toolkit for defining and handling the policy that
 allows unprivileged processes to speak to privileged processes.
 .
 This package contains a library for accessing the authentication agent.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/

Package: libpolkit-gobject-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 158
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 0.105-33
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.37.3), libsystemd0 (>= 213)
Description: PolicyKit Authorization API
 PolicyKit is a toolkit for defining and handling the policy that
 allows unprivileged processes to speak to privileged processes.
 .
 This package contains a library for accessing PolicyKit.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/

Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 120
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.18-3build1
Depends: libc6 (>= 2.33)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: https://github.com/rpm-software-management/popt
Original-Maintainer: Michael Jeanson <mjeanson@debian.org>

Package: libpq-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 580
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: postgresql-14
Version: 14.20-0ubuntu0.22.04.1
Depends: libpq5 (= 14.20-0ubuntu0.22.04.1), libssl-dev
Suggests: postgresql-doc-14
Description: header files for libpq5 (PostgreSQL library)
 Header files and static library for compiling C programs to link
 with the libpq library in order to communicate with a PostgreSQL
 database backend.
 .
 PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>

Package: libpq5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 424
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: postgresql-14
Version: 14.20-0ubuntu0.22.04.1
Depends: libc6 (>= 2.33), libgssapi-krb5-2 (>= 1.17), libldap-2.5-0 (>= 2.5.4), libssl3 (>= 3.0.0~~alpha1)
Description: PostgreSQL C client library
 libpq is a C library that enables user programs to communicate with
 the PostgreSQL database server.  The server can be on another machine
 and accessed through TCP/IP.  This version of libpq is compatible
 with servers from PostgreSQL 8.2 or later.
 .
 This package contains the run-time library, needed by packages using
 libpq.
 .
 PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>

Package: libprocps8
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.17-6ubuntu2.1
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.34), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compiled with libprocps.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libproxy1v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libproxy
Version: 0.4.17-2
Replaces: libproxy1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Conflicts: libproxy1
Description: automatic proxy configuration management library (shared)
 libproxy is a lightweight library which makes it easy to develop
 applications proxy-aware with a simple and stable API.
 .
 This package contains the shared library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://libproxy.github.io/libproxy/

Package: libpsl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 209
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpsl
Version: 0.21.0-1.2build2
Depends: libpsl5 (= 0.21.0-1.2build2)
Description: Library for Public Suffix List (development headers)
 Libpsl allows checking domains against the Public Suffix List.
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 Please see https://publicsuffix.org for more detailed information.
 .
 This package contains development header files and documentation for
 developers.
Homepage: https://github.com/rockdaboot/libpsl
Original-Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>

Package: libpsl5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpsl
Version: 0.21.0-1.2build2
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.33), libunistring2 (>= 0.9.7)
Recommends: publicsuffix (>= 20150507)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List.
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 Please see https://publicsuffix.org for more detailed information.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl
Original-Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>

Package: libpsm-infinipath1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 447
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: infinipath-psm
Version: 3.3+20.604758e7-6.1
Depends: libc6 (>= 2.14), libuuid1 (>= 2.16)
Description: PSM Messaging library for Intel Truescale adapters
 The PSM Messaging API, or PSM API, is Intel's (formerly QLogic's) low-level,
 user-level communication interface for the Truescale family of products. PSM
 users can use mechanisms necessary to implement higher-level communication
 interfaces in parallel environments.
 .
 This package contains the shared libraries.
Original-Maintainer: Debian HPC Team <debian-hpc@lists.debian.org>
Homepage: https://github.com/intel/psm

Package: libpsm2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 463
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libpsm2
Version: 11.2.185-1
Depends: libc6 (>= 2.17), libnuma1 (>= 2.0.11)
Description: Intel PSM2 library
 PSM2 is Intel's low-level user-space communications interface for
 the Intel(R) OPA family of products. PSM2 users are enabled with
 mechanisms necessary to implement higher level communications
 interfaces in parallel environments.
Original-Maintainer: Debian HPC team <debian-hpc@lists.debian.org>
Homepage: https://github.com/01org/opa-psm2

Package: libpthread-stubs0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 18
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpthread-stubs
Version: 0.4-1build2
Description: pthread stubs not provided by native libc, development files
 This library provides weak aliases for pthread functions not provided
 in libc or otherwise available by default.  Libraries like libxcb rely
 on pthread stubs to use pthreads optionally, becoming thread-safe when
 linked to libpthread, while avoiding any performance hit when running
 single-threaded. libpthread-stubs supports this behavior even on
 platforms which do not supply all the necessary pthread stubs.
 .
 On platforms which already supply all the necessary pthread stubs, this
 package ships only the pkg-config file pthread-stubs.pc, to allow
 libraries to unconditionally express a dependency on pthread-stubs and
 still obtain correct behavior.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libpulse0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1029
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pulseaudio
Version: 1:15.99.1+dfsg1-1ubuntu2.2
Depends: libapparmor1 (>= 2.7.0~beta1+bzr1772), libasyncns0 (>= 0.3), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libsndfile1 (>= 1.0.20), libsystemd0, libx11-6, libx11-xcb1 (>= 2:1.7.5), libxcb1
Suggests: pulseaudio
Conffiles:
 /etc/pulse/client.conf 16bb1fd7704eae3f0e7dde080b83e197
Description: PulseAudio client libraries
 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
Homepage: http://www.pulseaudio.org
Original-Maintainer: Pulseaudio maintenance team <pkg-pulseaudio-devel@lists.alioth.debian.org>

Package: libpython3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.10.6-1~22.04.1
Replaces: libpython3.8-dev (<< 3.8.0-2), python3-dev (<< 3.8.0-1)
Depends: libpython3.10-dev (>= 3.10.6-1~)
Breaks: libpython3.8-dev (<< 3.8.0-2), python3-dev (<< 3.8.0-1)
Description: header files and a static library for Python (default)
 Header files, a static library and development tools for building
 Python modules, extending the Python interpreter or embedding Python
 in applications.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version's headers (currently v3.10).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://www.python.org/

Package: libpython3-stdlib
Status: install ok installed
Priority: important
Section: python
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.10.6-1~22.04.1
Depends: libpython3.10-stdlib (>= 3.10.6-1~)
Description: interactive high-level object-oriented language (default python3 version)
 This package contains the majority of the standard library for the Python
 language (default python3 version).
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version's standard library (currently v3.10).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://www.python.org/

Package: libpython3.10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5768
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.10
Version: 3.10.12-1~22.04.13
Depends: libpython3.10-stdlib (= 3.10.12-1~22.04.13), libc6 (>= 2.35), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Description: Shared Python runtime library (version 3.10)
 Python is a high-level, interactive, object-oriented language. Its 3.10 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains the shared runtime library, normally not needed
 for programs using the statically linked interpreter.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libpython3.10-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 20425
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.10
Version: 3.10.12-1~22.04.13
Depends: libpython3.10-stdlib (= 3.10.12-1~22.04.13), libpython3.10 (= 3.10.12-1~22.04.13), libexpat1-dev, zlib1g-dev
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.10)
 Header files, a static library and development tools for building
 Python (v3.10) modules, extending the Python interpreter or embedding
 Python (v3.10) in applications.
 .
 Maintainers of Python packages should read README.maintainers.
 .
 This package contains development files. It is normally not
 used on it's own, but as a dependency of python3.10-dev.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libpython3.10-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.10
Version: 3.10.12-1~22.04.13
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0~~alpha1)
Recommends: libpython3.10-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python3.10/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.10)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python3.10-minimal.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libpython3.10-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8120
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.10
Version: 3.10.12-1~22.04.13
Replaces: python3-gdbm (<< 3.9.9-1~)
Depends: libpython3.10-minimal (= 3.10.12-1~22.04.13), media-types | mime-support, libbz2-1.0, libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libdb5.3, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libmpdec3, libncursesw6 (>= 6.1), libnsl2 (>= 1.0), libreadline8 (>= 7.0~beta), libsqlite3-0 (>= 3.14.0), libtinfo6 (>= 6), libtirpc3 (>= 1.0.2), libuuid1 (>= 2.20.1)
Breaks: python3-gdbm (<< 3.9.9-1~)
Description: Interactive high-level object-oriented language (standard library, version 3.10)
 Python is a high-level, interactive, object-oriented language. Its 3.10 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 3.10's standard library. It is normally not
 used on its own, but as a dependency of python3.10.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libquadmath0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 296
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.23)
Description: GCC Quad-Precision Math Library
 A library, which provides quad-precision mathematical functions on targets
 supporting the __float128 datatype. The library is used to provide on such
 targets the REAL(16) type in the GNU Fortran compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libraqm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: raqm
Version: 0.7.0-4ubuntu1
Depends: libc6 (>= 2.14), libfreetype6 (>= 2.4.2), libfribidi0 (>= 1.0.0), libharfbuzz0b (>= 2.1.1)
Description: Library for complex text layout
 Raqm is a small library to provide convenience functions for complex text
 layout. It currently provides bidirectional text support (using FriBiDi),
 shaping (using HarfBuzz), with proper script itemization.
 .
 This package contains the shared libraries.
Homepage: https://github.com/HOST-Oman/libraqm
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>

Package: libraw1394-11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libraw1394
Version: 2.1.2-2build2
Depends: libc6 (>= 2.14)
Suggests: libraw1394-doc
Description: library for direct access to IEEE 1394 bus (aka FireWire)
 libraw1394 is the only supported interface to the kernel side raw1394
 of the Linux IEEE-1394 subsystem, which provides direct access to the
 connected 1394 buses to user space.  Through libraw1394/raw1394,
 applications can directly send to and receive from other nodes without
 requiring a kernel driver for the protocol in question.
Homepage: https://ieee1394.wiki.kernel.org/
Original-Maintainer: Guus Sliepen <guus@debian.org>

Package: librdmacm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 209
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rdma-core
Version: 39.0-1
Depends: libc6 (>= 2.34), libibverbs1 (>= 31), libnl-3-200 (>= 3.2.7)
Description: Library for managing RDMA connections
 librdmacm is a library that allows applications to set up reliable
 connected and unreliable datagram transfers when using RDMA adapters.
 It provides a transport-neutral interface in the sense that the same
 code can be used for both InfiniBand and iWARP adapters.  The
 interface is based on sockets, but adapted for queue pair (QP) based
 semantics: communication must use a specific RDMA device, and data
 transfers are message-based.
 .
 librdmacm only provides communication management (connection setup
 and tear-down) and works in conjunction with the verbs interface
 provided by libibverbs, which provides the interface used to actually
 transfer data.
 .
 This package contains the shared library.
Original-Maintainer: Benjamin Drung <benjamin.drung@ionos.com>
Homepage: https://github.com/linux-rdma/rdma-core

Package: libreadline-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 784
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 8.1.2-1
Provides: libreadline6-dev
Depends: libreadline8 (= 8.1.2-1), libncurses-dev, dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-gplv2-dev, libreadline5-dev, libreadline6-dev
Description: GNU readline and history libraries, development files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
 .
 This package contains development files.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libreadline8
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 461
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 8.1.2-1
Depends: readline-common, libc6 (>= 2.33), libtinfo6 (>= 6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: librsvg2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 10760
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.52.5+dfsg-3ubuntu0.2
Depends: libc6 (>= 2.34), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.15.12), libgcc-s1 (>= 4.2), libgdk-pixbuf-2.0-0 (>= 2.31.1), libglib2.0-0 (>= 2.50.0), libpango-1.0-0 (>= 1.45.5), libpangocairo-1.0-0 (>= 1.44.0), libxml2 (>= 2.9.0)
Recommends: librsvg2-common
Suggests: librsvg2-bin
Description: SAX-based renderer library for SVG files (runtime)
 The rsvg library is an efficient renderer for Scalable Vector Graphics
 (SVG) pictures.
 .
 This package contains the runtime library, necessary to run
 applications using librsvg.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: librsvg2-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.52.5+dfsg-3ubuntu0.2
Depends: librsvg2-2 (= 2.52.5+dfsg-3ubuntu0.2), libgdk-pixbuf-2.0-0 (>= 2.23.5-2), libglib2.0-0 (>= 2.50.0)
Description: SAX-based renderer library for SVG files (extra runtime)
 The rsvg library is an efficient renderer for Scalable Vector Graphics
 (SVG) pictures.
 .
 This package includes the gdk-pixbuf loader allowing
 to load SVG images transparently inside GTK+ applications.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: librtmp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 225
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump
Version: 2.4+20151223.gitfa8646d.1-2build4
Depends: librtmp1 (= 2.4+20151223.gitfa8646d.1-2build4), libgmp-dev, libgnutls28-dev, nettle-dev, zlib1g-dev
Description: toolkit for RTMP streams (development files)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the development libraries, header files needed by
 programs that want to compile with librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump
Version: 2.4+20151223.gitfa8646d.1-2build4
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg), libgnutls30 (>= 3.7.2), libhogweed6, libnettle8, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the shared libraries, header files needed by
 programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libruby3.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 22380
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ruby3.0
Version: 3.0.2-7ubuntu2.11
Provides: ruby-abbrev (= 0.1.0), ruby-base64 (= 0.1.0), ruby-benchmark (= 0.1.1), ruby-bigdecimal (= 3.0.0), ruby-cgi (= 0.2.0), ruby-csv (= 3.1.9), ruby-date (= 3.1.0), ruby-dbm (= 1.1.0), ruby-debug (= 0.1.0), ruby-delegate (= 0.2.0), ruby-did-you-mean (= 1.5.0), ruby-digest (= 3.0.0), ruby-drb (= 2.0.4), ruby-english (= 0.7.1), ruby-erb (= 2.2.0), ruby-etc (= 1.2.0), ruby-fcntl (= 1.0.0), ruby-fiddle (= 1.0.6), ruby-fileutils (= 1.5.0), ruby-find (= 0.1.0), ruby-forwardable (= 1.3.2), ruby-gdbm (= 2.1.0), ruby-getoptlong (= 0.1.1), ruby-io-console (= 0.5.7), ruby-io-nonblock (= 0.1.0), ruby-io-wait (= 0.1.0), ruby-ipaddr (= 1.2.2), ruby-irb (= 1.3.5), ruby-json (= 2.5.1), ruby-logger (= 1.4.3), ruby-matrix (= 0.3.1), ruby-minitest (= 5.14.2), ruby-mutex-m (= 0.1.1), ruby-net-ftp (= 0.1.2), ruby-net-http (= 0.1.1), ruby-net-imap (= 0.1.1), ruby-net-pop (= 0.1.1), ruby-net-protocol (= 0.1.0), ruby-net-smtp (= 0.2.1), ruby-nkf (= 0.1.0), ruby-observer (= 0.1.1), ruby-open-uri (= 0.1.0), ruby-open3 (= 0.1.1), ruby-openssl (= 3.0.0), ruby-optparse (= 0.1.0), ruby-ostruct (= 0.3.1), ruby-pathname (= 0.1.0), ruby-power-assert (= 1.2.0), ruby-pp (= 0.1.0), ruby-prettyprint (= 0.1.0), ruby-prime (= 0.1.2), ruby-pstore (= 0.1.1), ruby-psych (= 3.3.0), ruby-racc (= 1.5.1), ruby-rake (= 13.0.3), ruby-rbs (= 1.0.4), ruby-rdoc (= 6.3.1), ruby-readline (= 0.0.2), ruby-readline-ext (= 0.1.1), ruby-reline (= 0.2.5), ruby-resolv (= 0.2.0), ruby-resolv-replace (= 0.1.0), ruby-rexml (= 3.2.5), ruby-rinda (= 0.1.0), ruby-rss (= 0.2.9), ruby-securerandom (= 0.1.0), ruby-set (= 1.0.1), ruby-shellwords (= 0.1.0), ruby-singleton (= 0.1.1), ruby-stringio (= 3.0.0), ruby-strscan (= 3.0.0), ruby-syslog (= 0.1.0), ruby-tempfile (= 0.1.1), ruby-test-unit (= 3.3.7), ruby-time (= 0.1.0), ruby-timeout (= 0.1.1), ruby-tmpdir (= 0.1.2), ruby-tracer (= 0.1.1), ruby-tsort (= 0.1.0), ruby-typeprof (= 0.12.0), ruby-un (= 0.1.0), ruby-uri (= 0.10.1), ruby-weakref (= 0.1.1), ruby-yaml (= 0.1.1), ruby-zlib (= 1.1.0)
Depends: rake (>= 10.4.2), ruby-net-telnet (>= 0.1.1), ruby-xmlrpc (>= 0.3.0~), libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), libedit2 (>= 3.1-20130611-0), libffi8 (>= 3.4), libgdbm-compat4 (>= 1.16), libgdbm6 (>= 1.16), libgmp10 (>= 2:6.2.1+dfsg), libssl3 (>= 3.0.0~~alpha1), libyaml-0-2, zlib1g (>= 1:1.2.2)
Description: Libraries necessary to run Ruby 3.0
 Ruby is the interpreted scripting language for quick and easy
 object-oriented programming.  It has many features to process text
 files and to do system management tasks (as in perl).  It is simple,
 straight-forward, and extensible.
 .
 This package includes the 'libruby-3.0' library, necessary to run Ruby 3.0.
 (API version 3.0.0)
Homepage: https://www.ruby-lang.org/
Original-Maintainer: Debian Ruby Team <pkg-ruby-extras-maintainers@lists.alioth.debian.org>

Package: libsamplerate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1484
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsamplerate
Version: 0.2.2-1build1
Replaces: samplerate-programs (<< 0.1.8-3)
Depends: libc6 (>= 2.14)
Description: Audio sample rate conversion library
 libsamplerate (aka Secret Rabbit Code) is a library for audio rate conversion.
 .
 libsamplerate currently provides three different sample rate conversion
 algorithms; zero order hold, linear interpolation and FIR filter interpolation
 (using filters derived from the mathematical SINC function). The first two
 algorithms (zero order hold and linear) are included for completeness and are
 not recommended for any application where high quality sample rate conversion
 is required. For the FIR/Sinc algorithm, three converters are provided;
 SRC_SINC_FASTEST, SRC_SINC_MEDIUM_QUALITY and SRC_SINC_BEST_QUALITY to allow a
 trade off between conversion speed and conversion quality.
 .
 libsamplerate is capable of downsampling to 1/256 of the original sample rate
 and upsampling to 256 times the original sample rate. It is also capable of
 time varying conversions for vary speed effects and synchronising of two
 unlocked sample rates.
Homepage: http://www.mega-nerd.com/SRC/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libsasl2-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 170
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27+dfsg2-3ubuntu1.2
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.27+dfsg2-3ubuntu1.2), libc6 (>= 2.34)
Recommends: libsasl2-modules (>= 2.1.27+dfsg2-3ubuntu1.2)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, SCRAM, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>

Package: libsasl2-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 308
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27+dfsg2-3ubuntu1.2
Replaces: libsasl2-modules-gssapi-mit (<< 2.1.27+dfsg2-3ubuntu1.2)
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0~~alpha1)
Suggests: libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal, libsasl2-modules-ldap, libsasl2-modules-otp, libsasl2-modules-sql
Breaks: libsasl2-modules-gssapi-mit (<< 2.1.27+dfsg2-3ubuntu1.2), logcheck-database (<= 1.3.16~)
Conffiles:
 /etc/logcheck/ignore.d.server/libsasl2-modules bef6e87d49dab9587a357eb525524bda
Description: Cyrus SASL - pluggable authentication modules
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the following SASL modules: LOGIN, PLAIN, ANONYMOUS,
 NTLM, SCRAM, CRAM-MD5, and DIGEST-MD5 (with DES support, deprecated).
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>

Package: libsasl2-modules-db
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 93
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27+dfsg2-3ubuntu1.2
Depends: libc6 (>= 2.14), libdb5.3
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>

Package: libseccomp2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.5.3-2ubuntu3~22.04.1
Depends: libc6 (>= 2.4)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp
Original-Maintainer: Kees Cook <kees@debian.org>

Package: libsecret-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 429
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsecret
Version: 0.20.5-2
Depends: libc6 (>= 2.14), libgcrypt20 (>= 1.9.0), libglib2.0-0 (>= 2.59.0), libsecret-common
Breaks: seahorse (<< 3.10)
Description: Secret store
 Library for storing and retrieving passwords and other secrets.
 It communicates with the "Secret Service" using DBus.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Projects/Libsecret

Package: libsecret-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libsecret
Version: 0.20.5-2
Description: Secret store (common files)
 Library for storing and retrieving passwords and other secrets.
 It communicates with the "Secret Service" using DBus.
 .
 This package contains data files used by the libsecret library.
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Homepage: https://wiki.gnome.org/Projects/Libsecret

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 207
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 3.3-1build2
Depends: libc6 (>= 2.34), libpcre2-8-0 (>= 10.22)
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: https://selinuxproject.org

Package: libsemanage-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 3.3-1build2
Conffiles:
 /etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: https://selinuxproject.org

Package: libsemanage2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 3.3-1build2
Depends: libsemanage-common (>= 3.3-1build2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.33), libselinux1 (>= 3.3), libsepol2 (>= 3.3)
Breaks: policycoreutils (<< 3.0)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: https://selinuxproject.org

Package: libsensors-config
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lm-sensors
Version: 1:3.6.0-7ubuntu1
Replaces: libsensors4
Suggests: lm-sensors
Breaks: libsensors4
Conffiles:
 /etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e
 /etc/sensors3.conf 41bd2b70a6ce64a21c2d1f70b9eed091
Description: lm-sensors configuration files
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This library is only functional with a Linux kernel, it is provided on
 non-Linux systems for portability reasons only.
 .
 This package contains the configuration files.
Homepage: https://hwmon.wiki.kernel.org/lm_sensors
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>

Package: libsensors5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lm-sensors
Version: 1:3.6.0-7ubuntu1
Depends: libsensors-config, libc6 (>= 2.33)
Suggests: lm-sensors
Description: library to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This library is only functional with a Linux kernel, it is provided on
 non-Linux systems for portability reasons only.
 .
 This package contains a shared library for querying lm-sensors.
Homepage: https://hwmon.wiki.kernel.org/lm_sensors
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>

Package: libsepol2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 735
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 3.3-1build1
Depends: libc6 (>= 2.33)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: https://selinuxproject.org
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>

Package: libshout3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libshout
Version: 2.4.5-1build3
Depends: libc6 (>= 2.34), libogg0 (>= 1.0rc3), libspeex1 (>= 1.2~beta3-1), libssl3 (>= 3.0.0~~alpha1), libtheora0 (>= 0.0.0.alpha7.dfsg), libvorbis0a (>= 1.1.2)
Description: MP3/Ogg Vorbis broadcast streaming library
 A library for communicating with and sending data to Icecast and Icecast 2
 streaming audio servers.  It handles the socket connection, the timing of
 the data transmission, and prevents bad data from getting to the server.
Homepage: https://www.icecast.org/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsigsegv
Version: 2.13-1ubuntu3
Depends: libc6 (>= 2.4)
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libsigsegv/
Original-Maintainer: Debian Common Lisp Team <debian-common-lisp@lists.debian.org>

Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1628
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.2-5build4
Depends: libc6 (>= 2.35)
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>
Built-Using: unicode-data (= 14.0.0-1.1)
Homepage: http://www.jedsoft.org/slang/

Package: libsm-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.3-1build2
Depends: libsm6 (= 2:1.2.3-1build2), x11proto-core-dev, libice-dev (>= 1:1.0.0-1)
Suggests: libsm-doc
Description: X11 Session Management library (development headers)
 This package provides the main interface to the X11 Session Management
 library, which allows for applications to both manage sessions, and make use
 of session managers to save and restore their state for later use.
 .
 This package contains the development headers for the library found in libsm6.
 Non-developers likely have little use for this package.
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libSM
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libsm6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.3-1build2
Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libuuid1 (>= 2.16)
Description: X11 Session Management library
 This package provides the main interface to the X11 Session Management
 library, which allows for applications to both manage sessions, and make use
 of session managers to save and restore their state for later use.
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libSM
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Depends: libc6 (>= 2.14)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: libsnappy1v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: snappy
Version: 1.1.8-1build3
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Conflicts: libsnappy1
Description: fast compression/decompression library
 Snappy is a compression/decompression library. It does not aim for
 maximum compression, or compatibility with any other compression
 library; instead, it aims for very high speeds and reasonable
 compression.
 .
 For instance, compared to the fastest mode of zlib, Snappy
 is an order of magnitude faster for most inputs, but the resulting
 compressed files are anywhere from 20% to 100% bigger. On a single core
 of a Core i7 processor in 64-bit mode, Snappy compresses at about 250
 MB/sec or more and decompresses at about 500 MB/sec or more.
Homepage: https://google.github.io/snappy/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libsndfile1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 528
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsndfile
Version: 1.0.31-2ubuntu0.2
Depends: libc6 (>= 2.33), libflac8 (>= 1.3.0), libogg0 (>= 1.3.0), libopus0 (>= 1.1), libvorbis0a (>= 1.2.3), libvorbisenc2 (>= 1.2.3)
Description: Library for reading/writing audio files
 libsndfile is a library of C routines for reading and writing files containing
 sampled audio data.
 .
 Various versions of WAV (integer, floating point, GSM, and compressed formats);
 Microsoft PCM, A-law and u-law formats; AIFF, AIFC and RIFX; various AU/SND
 formats (Sun/NeXT, Dec AU, G721 and G723 ADPCM); RAW header-less PCM files;
 Amiga IFF/8SVX/16SV PCM files; Ensoniq PARIS  (.PAF); Apple's Core Audio Format
 (CAF) and others.
Homepage: http://www.mega-nerd.com/libsndfile/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libsnmp-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 678
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: net-snmp
Version: 5.9.1+dfsg-1ubuntu2.9
Replaces: snmp (<< 5.7.3+dfsg-5)
Suggests: snmp-mibs-downloader
Breaks: snmp (<< 5.7.3+dfsg-5)
Conffiles:
 /etc/snmp/snmp.conf 72b4d550c66b2221e3c418c34395cc66
Description: SNMP configuration script, MIBs and documentation
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.
 .
 This package includes documentation and MIBs (Management Information Bases)
 for the SNMP libraries, agents and applications. MIBs contain a formal
 description of the data that can be managed using SNMP and applications.
 .
 NOTE: If you want the OIDs (Object Identifiers) to resolve to their text
 description, you need to activate the non-free repository and install the
 "snmp-mibs-downloader" package.
Homepage: http://net-snmp.sourceforge.net/
Original-Maintainer: Debian SNMP Team <team+snmp@tracker.debian.org>

Package: libsnmp40
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3806
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: net-snmp
Version: 5.9.1+dfsg-1ubuntu2.9
Depends: libc6 (>= 2.34), libpci3 (>= 1:3.5.1), libperl5.34 (>= 5.34.0), libsensors5 (>= 1:3.5.0), libssl3 (>= 3.0.0~~alpha1), libwrap0 (>= 7.6-4~), libsnmp-base
Description: SNMP (Simple Network Management Protocol) library
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.
 .
 The Net-SNMP library contains common functions for the construction,
 sending, receiving, decoding, and manipulation of the SNMP requests
 and responses.
Homepage: http://net-snmp.sourceforge.net/
Original-Maintainer: Debian SNMP Team <team+snmp@tracker.debian.org>

Package: libsodium23
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 398
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsodium
Version: 1.0.18-1ubuntu0.22.04.1
Depends: libc6 (>= 2.33)
Description: Network communication, cryptography and signaturing library
 NaCl (pronounced "salt") is a new easy-to-use high-speed software library for
 network communication, encryption, decryption, signatures, etc.
 .
 NaCl's goal is to provide all of the core operations needed to build
 higher-level cryptographic tools.
 .
 Sodium is a portable, cross-compilable, installable, packageable fork of NaCl,
 with a compatible API.
Homepage: https://www.libsodium.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libsoup2.4-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 740
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsoup2.4
Version: 2.74.2-3ubuntu0.6
Depends: glib-networking (>= 2.32.0), libsoup2.4-common, libbrotli1 (>= 0.6.0), libc6 (>= 2.14), libglib2.0-0 (>= 2.61.2), libgssapi-krb5-2 (>= 1.17), libpsl5 (>= 0.20), libsqlite3-0 (>= 3.5.9), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.0)
Description: HTTP library implementation in C -- Shared library
 It was originally part of a SOAP (Simple Object Access Protocol)
 implementation called Soup, but the SOAP and non-SOAP parts have now been
 split into separate packages.
 .
 libsoup uses the Glib main loop and is designed to work well with GTK+
 applications.  This enables GNOME applications to access HTTP servers
 on the network in a completely asynchronous fashion, very similar to
 the GTK+ programming model (a synchronous operation mode is also
 supported for those who want it).
 .
 Features:
  * Both asynchronous (GMainLoop and callback-based) and synchronous APIs
  * Automatically caches connections
  * SSL Support using GnuTLS
  * Proxy support, including authentication and SSL tunneling
  * Client support for Digest, NTLM, and Basic authentication
  * Server support for Digest and Basic authentication
  * Basic client-side SOAP and XML-RPC support
 .
 This package contains the shared library.
Homepage: https://wiki.gnome.org/Projects/libsoup
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libsoup2.4-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libsoup2.4
Version: 2.74.2-3ubuntu0.6
Description: HTTP library implementation in C -- Common files
 It was originally part of a SOAP (Simple Object Access Protocol)
 implementation called Soup, but the SOAP and non-SOAP parts have now been
 split into separate packages.
 .
 This package contains architecture-independent files such as translations.
Homepage: https://wiki.gnome.org/Projects/libsoup
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libspa-0.2-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2221
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pipewire
Version: 0.3.48-1ubuntu3
Replaces: pipewire (<< 0.3.5)
Depends: libasound2 (>= 1.2.1.1), libc6 (>= 2.33), libdbus-1-3 (>= 1.9.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5), libsystemd0, libudev1 (>= 183), libwebrtc-audio-processing1
Breaks: pipewire (<< 0.3.5)
Description: libraries for the PipeWire multimedia server Simple Plugin API - modules
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package contains core support modules used in the Simple Plugin API,
 together with test and utility modules that do not introduce additional
 dependencies. It should not normally be depended on directly: PipeWire
 clients should depend on the pipewire package instead.
Homepage: https://pipewire.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@alioth-lists.debian.net>

Package: libspeex1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: speex
Version: 1.2~rc1.2-1.1ubuntu3
Depends: libc6 (>= 2.29)
Suggests: speex
Conflicts: asterisk (<= 1:1.4.18.1~dfsg-1), libiaxclient1 (<= 2.0.2-1), libmediastreamer0 (<= 2.1.0-1), libopal-2.2 (<= 2.2.11~dfsg1-3), libopal-2.2-develop (<= 2.2.11~dfsg1-3), libopal-2.2-ptrace (<= 2.2.11~dfsg1-3), libopal-2.2.0
Description: The Speex codec runtime library
 Speex is an audio codec especially designed for compressing voice at low
 bit-rates for applications such as voice over IP (VoIP). In some senses,
 it is meant to be complementary to the Vorbis codec which places a greater
 emphasis on high-quality music reproduction.
 .
 This package provides the speex runtime library.
Homepage: http://www.speex.org/
Original-Maintainer: Ron Lee <ron@debian.org>

Package: libsqlite3-0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1603
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.37.2-2ubuntu0.5
Depends: libc6 (>= 2.34)
Breaks: python-migrate (<< 0.11.0-4~), python3-migrate (<< 0.11.0-4~)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: https://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libsqlite3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3093
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.37.2-2ubuntu0.5
Depends: libsqlite3-0 (= 3.37.2-2ubuntu0.5), libc6-dev
Suggests: sqlite3-doc
Description: SQLite 3 development files
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
 .
 This package contains the development files (headers, static libraries)
Homepage: https://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.46.5-2ubuntu1.2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcom-err2, libc6 (>= 2.34)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: libssh-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 491
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libssh
Version: 0.9.6-2ubuntu0.22.04.5
Depends: libc6 (>= 2.33), libgssapi-krb5-2 (>= 1.17), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.1.4)
Breaks: remmina (<< 1.2.31.2+dfsg-1+), remmina-plugin-nx (<< 1.2.31.2+dfsg-1+), x2goclient (<< 4.1.2.1-1+)
Description: tiny C SSH library (OpenSSL flavor)
 The ssh library was designed to be used by programmers needing a working SSH
 implementation by the mean of a library. The complete control of the client
 is made by the programmer. With libssh, you can remotely execute programs,
 transfer files, use a secure and transparent tunnel for your remote programs.
 With its SFTP implementation, you can play with remote files easily.
 .
 This package contains shared libraries linked against OpenSSL.
Homepage: https://www.libssh.org/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: libssl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 12102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 3.0.2-0ubuntu1.20
Depends: libssl3 (= 3.0.2-0ubuntu1.20)
Suggests: libssl-doc
Conflicts: libssl1.0-dev
Description: Secure Sockets Layer toolkit - development files
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains development libraries, header files, and manpages for libssl
 and libcrypto.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>

Package: libssl3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5834
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 3.0.2-0ubuntu1.20
Depends: libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>

Package: libstdc++-11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 18759
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04.2
Provides: libstdc++-dev
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04.2), libgcc-11-dev (= 11.4.0-1ubuntu1~22.04.2), libstdc++6 (>= 11.4.0-1ubuntu1~22.04.2), libc6-dev (>= 2.13-0ubuntu6)
Suggests: libstdc++-11-doc
Description: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2755
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Replaces: libstdc++6-12-dbg (<< 4.9.0-3)
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.34), libgcc-s1 (>= 4.2)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libstemmer0d
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 839
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: snowball
Version: 2.2.0-1build1
Depends: libc6 (>= 2.4)
Description: Snowball stemming algorithms for use in Information Retrieval
 Snowball provides access to efficient algorithms for calculating a
 "stemmed" form of a word.  This is a form with most of the common
 morphological endings removed; hopefully representing a common
 linguistic base form.  This is most useful in building search engines
 and information retrieval software; for example, a search with stemming
 enabled should be able to find a document containing "cycling" given the
 query "cycles".
 .
 Snowball provides algorithms for several (mainly European) languages.
 It also provides access to the classic Porter stemming algorithm for
 English: although this has been superseded by an improved algorithm, the
 original algorithm may be of interest to information retrieval
 researchers wishing to reproduce results of earlier experiments.
Homepage: https://snowballstem.org/
Original-Maintainer: Stefano Rivera <stefanor@debian.org>

Package: libsystemd0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 996
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 249.11-0ubuntu3.17
Pre-Depends: libc6 (>= 2.34), libcap2 (>= 1:2.24-9~), libgcrypt20 (>= 1.9.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libzstd1 (>= 1.4.0)
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libtag1v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: taglib
Version: 1.11.1+dfsg.1-3ubuntu3
Replaces: libtag1c2a
Depends: libtag1v5-vanilla (= 1.11.1+dfsg.1-3ubuntu3)
Conflicts: libtag-extras0, libtag1c2a
Description: audio meta-data library
 TagLib is a library for reading and editing audio meta data, commonly know as
 tags.
 .
  - A clean, high level, C++ API to handling audio meta data.
  - Format specific APIs for advanced API users.
  - ID3v1, ID3v2, APE, FLAC, Xiph, iTunes-style MP4 and WMA tag formats.
  - MP3, MPC, FLAC, MP4, ASF, AIFF, WAV, TrueAudio, WavPack, Ogg FLAC, Ogg
    Vorbis, Speex and Opus file formats.
  - Basic audio file properties such as length, sample rate, etc.
  - Long term binary and source compatibility.
  - Extensible design, notably the ability to add other formats or extend
  - current formats as a library user.
  - Full support for unicode and internationalized tags.
  - Dual MPL and LGPL licenses.
  - No external toolkit dependencies.
 .
 This package is the main metapackage for the TagLib Audio Meta-Data Library.
 Historically packages using TagLib should depend on this package rather than
 specific TagLib flavour even if the only vanilla (original) flavour is
 available at the moment.
Homepage: http://taglib.github.io/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libtag1v5-vanilla
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1093
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: taglib
Version: 1.11.1+dfsg.1-3ubuntu3
Replaces: libtag1-vanilla, libtag1c2a (<< 1.5-5)
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libicu70 (>= 70.1-1~), libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4)
Breaks: libtag1-vanilla, libtag1c2a (<< 1.5-5)
Conflicts: libtag-extras0, libtag1-rusxmms
Description: audio meta-data library - vanilla flavour
 TagLib is a library for reading and editing audio meta data, commonly know as
 tags.
 .
  - A clean, high level, C++ API to handling audio meta data.
  - Format specific APIs for advanced API users.
  - ID3v1, ID3v2, APE, FLAC, Xiph, iTunes-style MP4 and WMA tag formats.
  - MP3, MPC, FLAC, MP4, ASF, AIFF, WAV, TrueAudio, WavPack, Ogg FLAC, Ogg
    Vorbis, Speex and Opus file formats.
  - Basic audio file properties such as length, sample rate, etc.
  - Long term binary and source compatibility.
  - Extensible design, notably the ability to add other formats or extend
  - current formats as a library user.
  - Full support for unicode and internationalized tags.
  - Dual MPL and LGPL licenses.
  - No external toolkit dependencies.
 .
 This is the runtime package for programs that use the TagLib Audio Meta-Data
 Library. This package contains original and unpatched flavour of the library.
Homepage: http://taglib.github.io/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libtasn1-6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 4.18.0-4ubuntu0.2
Depends: libc6 (>= 2.14)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libtasn1/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libtasn1-6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 275
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtasn1-6
Version: 4.18.0-4ubuntu0.2
Provides: libtasn1-dev
Depends: libtasn1-6 (= 4.18.0-4ubuntu0.2)
Recommends: libtasn1-doc (= 4.18.0-4ubuntu0.2)
Conflicts: libtasn1-dev
Description: Manage ASN.1 structures (development)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains header files and libraries for static linking.
Homepage: https://www.gnu.org/software/libtasn1/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libtasn1-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: libtasn1-6
Version: 4.18.0-4ubuntu0.2
Replaces: libtasn1-3-dev (<< 3), libtasn1-6-dev (<< 3.6-2)
Breaks: libtasn1-3-dev (<< 3), libtasn1-6-dev (<< 3.6-2)
Description: Manage ASN.1 structures (documentation)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains the documentation for developing with libtasn1.
Homepage: https://www.gnu.org/software/libtasn1/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libtdb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tdb
Version: 1.4.5-2build1
Depends: libc6 (>= 2.34)
Description: Trivial Database - shared library
 This is a simple database API. It is modelled after the structure
 of GDBM. TDB features, unlike GDBM, multiple writers support with
 appropriate locking and transactions.
 .
 This package contains the shared library file.
Original-Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Homepage: https://tdb.samba.org/

Package: libterm-readkey-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.38-1build4
Depends: perl, perlapi-5.34.0, libc6 (>= 2.28)
Description: perl module for simple terminal control
 Term::ReadKey is a compiled perl module dedicated to providing simple
 control over terminal driver modes (cbreak, raw, cooked, etc.) support for
 non-blocking reads, if the architecture allows, and some generalized handy
 functions for working with terminals. One of the main goals is to have the
 functions as portable as possible, so you can just plug in "use
 Term::ReadKey" on any architecture and have a good likelihood of it working.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/TermReadKey

Package: libtext-charwidth-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 45
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.04-10build3
Depends: libc6 (>= 2.34), perl-base, perlapi-5.34.0
Description: get display widths of characters on the terminal
 Text::CharWidth permits one to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Text-CharWidth

Package: libtext-iconv-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.7-7build3
Depends: libc6 (>= 2.34), perl-base, perlapi-5.34.0
Description: module to convert between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Text-Iconv

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 25
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.06-9
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 The Text::WrapI18N module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth characters
 such as east Asian characters, combining characters such as diacritical marks
 and Thai, and languages which don't use whitespaces between words such as
 Chinese and Japanese.
 .
 It provides wrap().
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Text-WrapI18N

Package: libthai-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 595
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libthai
Version: 0.1.29-1build1
Breaks: libthai0 (<< 0.1.10)
Description: Data files for Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains data files needed by the LibThai library.
Homepage: https://linux.thai.net/projects/libthai
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>

Package: libthai0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libthai
Version: 0.1.29-1build1
Depends: libthai-data (>= 0.1.10), libc6 (>= 2.14), libdatrie1 (>= 0.2.0)
Enhances: libqtcore4, libqtgui4
Description: Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains the shared libraries needed to run programs that use
 the LibThai library.
Homepage: https://linux.thai.net/projects/libthai
Original-Maintainer: Theppitak Karoonboonyanan <thep@debian.org>

Package: libtheora0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 651
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtheora
Version: 1.1.1+dfsg.1-15ubuntu4
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libogg0 (>= 1.1.0)
Description: Theora Video Compression Codec
 Theora is an open video codec being developed by the Xiph.org Foundation as
 part of their Ogg project. Theora is originally derived from On2's VP3 codec,
 and has improved on it significantly with the merging of code from the
 Thusnelda branch.
Homepage: https://www.theora.org/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libtiff5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 585
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.3.0-6ubuntu0.12
Depends: libc6 (>= 2.33), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg8 (>= 8c), liblzma5 (>= 5.1.1alpha+20120614), libwebp7, libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Description: Tag Image File Format (TIFF) library
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libtimedate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.3300-2
Depends: perl:any
Description: collection of modules to manipulate date/time information
 TimeDate is a collection of Perl modules useful for manipulating date and
 time information. Date::Parse can parse absolute date specifications in a
 wide variety of input formats and many languages (via Date::Language).
 .
 This package also includes Date::Format, which can format dates into strings,
 as well as Time::Zone, which contains miscellaneous time zone functions.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/TimeDate

Package: libtinfo6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 558
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.3-2ubuntu0.1
Depends: libc6 (>= 2.33)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libtirpc-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libtirpc
Version: 1.3.2-2ubuntu0.1
Replaces: libtirpc1, libtirpc3 (<< 1.1.4-0.1~)
Breaks: libtirpc1, libtirpc3 (<< 1.1.4-0.1~)
Conffiles:
 /etc/netconfig ca8db53e3af4d735335c2607d21c7195
Description: transport-independent RPC library - common files
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
 .
 This package contains the netconfig configuration file as well as the
 associated manpage.
Homepage: http://sourceforge.net/projects/libtirpc
Original-Maintainer: Josue Ortega <josue@debian.org>

Package: libtirpc-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 720
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.2-2ubuntu0.1
Depends: libtirpc3 (= 1.3.2-2ubuntu0.1)
Description: transport-independent RPC library - development files
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
 .
 This package contains the files needed for development against libtirpc.
Homepage: http://sourceforge.net/projects/libtirpc
Original-Maintainer: Josue Ortega <josue@debian.org>

Package: libtirpc3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 219
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.2-2ubuntu0.1
Depends: libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libtirpc-common (>= 1.3.2-2ubuntu0.1)
Breaks: nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7)
Description: transport-independent RPC library
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
Homepage: http://sourceforge.net/projects/libtirpc
Original-Maintainer: Josue Ortega <josue@debian.org>

Package: libtool
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.4.6-15build2
Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev
Recommends: libltdl-dev
Suggests: libtool-doc, autoconf (>> 2.50), automaken, gfortran | fortran95-compiler, gcj-jdk
Conflicts: autoconf (<= 2.12), automake (<= 1.3), libtool1.4
Description: Generic library support script
 This is GNU libtool, a generic library support script.  Libtool hides
 the complexity of generating special library types (such as shared
 libraries) behind a consistent interface.  To use libtool, add the
 new generic library building commands to your Makefile, Makefile.in,
 or Makefile.am.  See the documentation for details.  Libtool supports
 building static libraries on all platforms.
 .
 Libtool supports generation of C, C++, Fortran and Java libraries.
Homepage: https://www.gnu.org/software/libtool/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: libtsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7255
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-11
Version: 11.4.0-1ubuntu1~22.04.2
Depends: gcc-11-base (= 11.4.0-1ubuntu1~22.04.2), libc6 (>= 2.34), libgcc-s1
Description: ThreadSanitizer -- a Valgrind-based detector of data races (runtime)
 ThreadSanitizer (Tsan) is a data race detector for C/C++ programs.
 The Linux and Mac versions are based on Valgrind.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libtwolame0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 149
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: twolame
Version: 0.4.0-2build2
Depends: libc6 (>= 2.29)
Description: MPEG Audio Layer 2 encoding library
 TwoLAME is an optimized MPEG Audio Layer 2 encoder. It is based on tooLAME by
 Mike Cheng, which in turn is based upon the ISO dist10 code and portions of
 LAME.
 .
 TwoLAME does NOT support MPEG Audio Layer 3 (MP3) encoding due to patent
 issues surrounding MP3.
 .
 However, as most MPEG Audio players are able to play layer 2 (MP2) files,
 TwoLAME makes a very good drop-in replacement for LAME and other layer 3
 encoders.
 .
 This package contains the shared library.
Homepage: http://www.twolame.org
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libtypes-serialiser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.01-1
Depends: perl:any, libcommon-sense-perl
Description: module providing simple data types for common serialisation formats
 Types::Serialiser provides some extra datatypes that are used by common
 serialisation formats such as JSON or CBOR. The idea is to have a repository
 of simple/small constants and containers that can be shared by different
 implementations so they become interoperable between each other.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Types-Serialiser

Package: libubsan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2676
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.3.0-1ubuntu1~22.04.2
Depends: gcc-12-base (= 12.3.0-1ubuntu1~22.04.2), libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.1.1)
Description: UBSan -- undefined behaviour sanitizer (runtime)
 UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
 Various computations will be instrumented to detect undefined behavior
 at runtime. Available for C and C++.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libuchardet0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 208
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: uchardet
Version: 0.0.7-1build2
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 4.1.1)
Description: universal charset detection library - shared library
 uchardet is a C language binding of the original C++ implementation
 of the universal charset detection library by Mozilla.
 .
 uchardet is a encoding detector library, which takes a sequence of
 bytes in an unknown character encoding without any additional
 information, and attempts to determine the encoding of the text.
 .
 This package contains the shared library.
Homepage: https://www.freedesktop.org/wiki/Software/uchardet/
Original-Maintainer: James Cowgill <jcowgill@debian.org>

Package: libucx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2362
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ucx
Version: 1.12.1~rc2-1
Depends: ibverbs-providers (>= 25), libc6 (>= 2.34), libibverbs1 (>= 28), libnuma1 (>= 2.0.11), librdmacm1 (>= 23)
Breaks: libopenmpi3 (<< 4.1.0-3)
Description: Unified Communication X libraries
 Unified Communication X (UCX) provides an optimized communication layer
 for Message Passing (MPI), PGAS/OpenSHMEM libraries and RPC/data-centric
 applications.
 UCX utilizes high-speed networks for inter-node communication,i
 and shared memory mechanisms for efficient intra-node communication.
 This package provides shared libraries for UCX.
Original-Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Homepage: https://www.openucx.org

Package: libudev1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 348
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 249.11-0ubuntu3.17
Depends: libc6 (>= 2.34)
Description: libudev shared library
 This library provides access to udev device information.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libunbound8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 969
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: unbound
Version: 1.13.1-1ubuntu5.14
Depends: libc6 (>= 2.34), libevent-2.1-7 (>= 2.1.8-stable), libgmp10 (>= 2:6.2.1+dfsg), libhogweed6, libnettle8
Description: library implementing DNS resolution and validation
 libunbound performs and validates DNS lookups; it can be used to convert
 hostnames to IP addresses and back and obtain other information from the
 DNS. Cryptographic validation of results is performed with DNSSEC.
Homepage: https://www.unbound.net/
Original-Maintainer: unbound packagers <unbound@packages.debian.org>

Package: libunistring2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1746
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 1.0-1
Depends: libc6 (>= 2.34)
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Original-Maintainer: Jörg Frings-Fürst <debian@jff.email>
Homepage: https://www.gnu.org/software/libunistring/

Package: libunwind8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 196
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libunwind
Version: 1.3.2-2build2.1
Replaces: libgcc1 (<< 1:4.0.0-2)
Depends: libc6 (>= 2.34), liblzma5 (>= 5.1.1alpha+20110809)
Conflicts: libunwind1-dev
Description: library to determine the call-chain of a program - runtime
 The primary goal of this project is to define a portable and efficient C
 programming interface (API) to determine the call-chain of a program.
 The API additionally provides the means to manipulate the preserved
 (callee-saved) state of each call-frame and to resume execution at any
 point in the call-chain (non-local goto). The API supports both local
 (same-process) and remote (across-process) operation. As such, the API
 is useful in a number of applications.
 .
 This package includes the shared libraries
Homepage: http://www.nongnu.org/libunwind
Original-Maintainer: Adrian Bunk <bunk@debian.org>

Package: liburi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 222
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 5.10-1
Depends: perl:any
Suggests: libbusiness-isbn-perl (>= 3.005), libwww-perl
Description: module to manipulate and access URI strings
 URI is a collection of Perl modules that represent and manipulate Uniform
 Resource Identifier (URI) references as specified in RFC 2396.
 .
 URI objects can be used to access and manipulate the various components
 that make up these strings.  There are also methods to combine URIs in
 various ways.
 .
 The URI class replaces the URI::URL class that used to be distributed with
 libwww-perl. This package also includes an emulation of the old URI::URL
 interface, which implements both the old and the new interface.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/URI

Package: liburing2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: liburing
Version: 2.1-2build1
Depends: libc6 (>= 2.4)
Description: Linux kernel io_uring access library - shared library
 This library provides helpers to setup and teardown io_uring instances,
 and also a simplified interface for applications that do not need (or
 want) to deal with the full kernel side implementation.
 .
 This package contains the shared library.
Homepage: https://github.com/axboe/liburing
Original-Maintainer: Guillem Jover <guillem@debian.org>

Package: libusb-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libusb-1.0
Version: 2:1.0.25-1ubuntu2
Depends: libc6 (>= 2.34), libudev1 (>= 183)
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
 .
 This package contains what you need to run programs that use this
 library.
Homepage: http://www.libusb.info
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>

Package: libutempter0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libutempter
Version: 1.2.1-2build2
Depends: libc6 (>= 2.34)
Description: privileged helper for utmp/wtmp updates (runtime)
 The libutempter library provides interface for terminal emulators such as
 screen and xterm to record user sessions to utmp and wtmp files.
 .
 The utempter is a privileged helper used by libutempter library to manipulate
 utmp and wtmp files.
Homepage: http://git.altlinux.org/people/ldv/packages/?p=libutempter.git
Original-Maintainer: Christian Göttsche <cgzones@googlemail.com>

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Depends: libc6 (>= 2.25)
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: libuv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 253
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.43.0-1ubuntu0.1
Depends: libc6 (>= 2.34)
Description: asynchronous event notification library - runtime library
 Libuv is the asynchronous library behind Node.js. Very similar to libevent or
 libev, it provides the main elements for event driven systems: watching and
 waiting for availability in a set of sockets, and some other events like timers
 or asynchronous messages. However, libuv also comes with some other extras
 like:
  * files watchers and asynchronous operations
  * a portable TCP and UDP API, as well as asynchronous DNS resolution
  * processes and threads management, and a portable inter-process
    communications mechanism, with pipes and work queues
  * a plugins mechanism for loading libraries dynamically
  * interface with external libraries that also need to access the I/O.
 .
 This package includes the dynamic library against which you can link
 your program.
Homepage: https://github.com/libuv/libuv
Original-Maintainer: Dominique Dumont <dod@debian.org>

Package: libv4l-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: v4l-utils
Version: 1.22.1-2build1
Depends: libv4lconvert0 (= 1.22.1-2build1), libc6 (>= 2.34)
Description: Collection of video4linux support libraries
 libv4l is a collection of libraries which adds a thin abstraction layer on
 top of video4linux2 devices. The purpose of this (thin) layer is to make it
 easy for application writers to support a wide variety of devices without
 having to write separate code for different devices in the same class. libv4l
 consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
 .
 libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
 of the drivers for those devices supporting v4l1 compatibility (which many
 v4l2 drivers do not).
 .
 libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
 application transparent libv4lconvert conversion where necessary.
 .
 This package contains the shared libraries.
Homepage: https://linuxtv.org/downloads/v4l-utils/
Original-Maintainer: Gregor Jasny <gjasny@googlemail.com>

Package: libv4lconvert0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 304
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: v4l-utils
Version: 1.22.1-2build1
Replaces: libv4l-0 (<< 0.8.5-4)
Depends: libc6 (>= 2.34), libjpeg8 (>= 8c)
Breaks: libv4l-0 (<< 0.8.5-4)
Description: Video4linux frame format conversion library
 libv4lconvert offers functions to convert from any (known) pixelformat
 to BGR24, RGB24, YUV420 and YVU420.
 .
 This package contains the shared library.
Homepage: https://linuxtv.org/downloads/v4l-utils/
Original-Maintainer: Gregor Jasny <gjasny@googlemail.com>

Package: libvisual-0.4-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 356
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libvisual
Version: 0.4.0-17build2
Depends: libc6 (>= 2.34)
Suggests: libvisual-0.4-plugins
Breaks: libvisual-0.4-plugins (<< 0.4.0.dfsg.1-5)
Description: audio visualization framework
 Libvisual is a generic visualization framework that allows applications
 to easily access and manage visualization plugins.
 .
 Audio visualization is the process of making pretty moving images that
 are correlated in some way to the audio currently being played by a media
 player. Most audio visualization is tied to a specific application or media
 player, making it difficult to share code. Libvisual allows applications
 to use existing visualization plugins written for the libvisual framework.
 .
 This package provides the runtime libraries for libvisual. Libvisual is not
 very useful without visualization plugins, so it is highly recommended to
 install the libvisual-0.4-plugins package.
Homepage: http://libvisual.org
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: libvorbis0a
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-1build2
Depends: libc6 (>= 2.29), libogg0 (>= 1.1.0)
Description: decoder library for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbis library is the primary Ogg Vorbis library.
Homepage: https://www.xiph.org/vorbis/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libvorbisenc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 704
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-1build2
Depends: libc6 (>= 2.4), libvorbis0a (= 1.3.7-1build2)
Description: encoder library for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisenc library provides a convenient API for setting up an encoding
 environment using libvorbis.
Homepage: https://www.xiph.org/vorbis/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libvorbisfile3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-1build2
Depends: libc6 (>= 2.14), libogg0 (>= 1.1.0), libvorbis0a (= 1.3.7-1build2)
Description: high-level API for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisfile library provides a convenient high-level API for decoding
 and basic manipulation of all Vorbis-I audio streams.
Homepage: https://www.xiph.org/vorbis/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libvpx7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libvpx
Version: 1.11.0-2ubuntu2.4
Depends: libc6 (>= 2.34)
Description: VP8 and VP9 video codec (shared library)
 VP8 and VP9 are open video codecs, originally developed by On2 and released
 as open source by Google Inc. They are the successor of the VP3 codec,
 on which the Theora codec was based.
 .
 This package contains the shared libraries.
Homepage: https://www.webmproject.org
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libwavpack1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 201
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wavpack
Version: 5.4.0-1build2
Depends: libc6 (>= 2.33)
Description: audio codec (lossy and lossless) - library
 WavPack is a completely open audio compression format providing lossless,
 high-quality lossy, and a unique hybrid compression mode. Although the
 technology is loosely based on previous versions of WavPack, the new version
 4 format has been designed from the ground up to offer unparalleled
 performance and functionality.
 .
 This package contains the shared libraries necessary to run programs
 using libwavpack.
Homepage: http://www.wavpack.com
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: libwayland-client0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.20.0-1ubuntu0.1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.28), libffi8 (>= 3.4)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - client library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the client side of
 the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libwayland-cursor0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.20.0-1ubuntu0.1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.28), libwayland-client0 (>= 1.20.0)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - cursor library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships a helper library to manage cursors.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libwayland-egl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.20.0-1ubuntu0.1
Replaces: libwayland-egl1-mesa (<< 18.0.5-0)
Provides: libwayland-egl1-mesa
Depends: libc6 (>= 2.2.5)
Breaks: libwayland-egl1-mesa (<< 18.0.5-0)
Description: wayland compositor infrastructure - EGL library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the Wayland EGL platform
 of the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libwayland-server0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 107
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.20.0-1ubuntu0.1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.34), libffi8 (>= 3.4)
Breaks: weston (<< 1.2.0)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - server library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the server side of
 the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libwebkit2gtk-4.0-37
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88268
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: webkit2gtk
Version: 2.50.4-0ubuntu0.22.04.1
Depends: libjavascriptcoregtk-4.0-18 (= 2.50.4-0ubuntu0.22.04.1), gstreamer1.0-plugins-base, gstreamer1.0-plugins-good, libgles2, bubblewrap (>= 0.3.1), xdg-dbus-proxy, libatk1.0-0 (>= 1.32.0), libc6 (>= 2.35), libcairo2 (>= 1.14.0), libdrm2 (>= 2.4.107), libenchant-2-2 (>= 2.2.3), libepoxy0 (>= 1.3), libexpat1 (>= 2.1~beta3), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.11.1), libgbm1 (>= 21.3.0~rc1), libgcc-s1 (>= 4.0), libgcrypt20 (>= 1.9.0), libglib2.0-0 (>= 2.70.0), libgstreamer-gl1.0-0 (>= 1.14.0), libgstreamer-plugins-base1.0-0 (>= 1.20.0), libgstreamer1.0-0 (>= 1.20.0), libgtk-3-0 (>= 3.23.0), libharfbuzz-icu0 (>= 0.9.9), libharfbuzz0b (>= 1.8.6), libhyphen0 (>= 2.7.1), libicu70 (>= 70.1-1~), libjpeg8 (>= 8c), liblcms2-2 (>= 2.2+git20110628), libmanette-0.2-0 (>= 0.1.2), libpango-1.0-0 (>= 1.14.0), libpng16-16 (>= 1.6.2-1), libseccomp2 (>= 0.0.0~20120605), libsecret-1-0 (>= 0.7), libsoup2.4-1 (>= 2.69.90), libsqlite3-0 (>= 3.8.7), libstdc++6 (>= 12), libsystemd0, libtasn1-6 (>= 4.14), libwayland-client0 (>= 1.20.0), libwayland-server0 (>= 1.0.2), libwebp7, libwebpdemux2, libwebpmux3, libwoff1 (>= 1.0.0), libx11-6, libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.2.2)
Recommends: gstreamer1.0-gl, libgl1-mesa-dri, xdg-desktop-portal-gtk
Suggests: gstreamer1.0-libav, gstreamer1.0-plugins-bad, gstreamer1.0-alsa
Description: Web content engine library for GTK
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Original-Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>

Package: libwebp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 955
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.2.2-2ubuntu0.22.04.2
Depends: libwebp7 (= 1.2.2-2ubuntu0.22.04.2), libwebpmux3 (= 1.2.2-2ubuntu0.22.04.2), libwebpdemux2 (= 1.2.2-2ubuntu0.22.04.2)
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <jab@debian.org>

Package: libwebp7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 439
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.2.2-2ubuntu0.22.04.2
Depends: libc6 (>= 2.34)
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <jab@debian.org>

Package: libwebpdemux2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.2.2-2ubuntu0.22.04.2
Depends: libc6 (>= 2.14), libwebp7
Description: Lossy compression of digital photographic images.
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <jab@debian.org>

Package: libwebpmux3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.2.2-2ubuntu0.22.04.2
Depends: libc6 (>= 2.29), libwebp7
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <jab@debian.org>

Package: libwebrtc-audio-processing1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 676
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: webrtc-audio-processing
Version: 0.3.1-0ubuntu5
Depends: libc6 (>= 2.34), libgcc-s1 (>= 4.0), libstdc++6 (>= 11)
Description: AudioProcessing module from the WebRTC project.
 Audio processing library (echo-cancellation, gain control etc) around the
 AudioProcessing module from the WebRTC project
Homepage: http://freedesktop.org/software/pulseaudio/webrtc-audio-processing/
Original-Maintainer: Pulseaudio maintenance team <pkg-pulseaudio-devel@lists.alioth.debian.org>

Package: libwmflite-0.2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 195
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libwmf
Version: 0.2.12-5ubuntu1
Replaces: libwmf0.2-7 (<< 0.2.12-1)
Depends: libc6 (>= 2.14)
Breaks: libwmf0.2-7 (<< 0.2.12-1)
Description: Windows metafile conversion lite library
 Windows metafile (WMF) is a picture format used by many Windows
 programs, e.g. Microsoft Word.  libwmf is a library for interpreting
 metafile images and either displaying them using X or converting them
 to standard formats such as PNG, JPEG, PS, EPS and SVG(Z)...
 .
 This package contains the lite library.
Original-Maintainer: Yangfl <mmyangfl@gmail.com>
Homepage: http://wvware.sourceforge.net/libwmf.html

Package: libwoff1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 129
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: woff2
Version: 1.0.2-1build4
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: library for converting fonts to WOFF 2.0
 woff2 is a library for converting fonts from the TTF format to the WOFF 2.0
 format. The library also allows decompression from WOFF 2.0 to TTF.
 .
 The WOFF 2.0 format uses the Brotli compression algorithm to compress fonts
 suitable for use in CSS @font-face rules. WOFF 2.0 is a W3C Candidate
 Recommendation.
Homepage: https://github.com/google/woff2
Original-Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>

Package: libwrap0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-31build2
Depends: libc6 (>= 2.33), libnsl2 (>= 1.0)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1387
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.7.5-1ubuntu0.3
Depends: libc6 (>= 2.34), libxcb1 (>= 1.11.1), libx11-data
Breaks: libx11-xcb1 (<< 2:1.7.0-2)
Description: X11 client-side library
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1430
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.7.5-1ubuntu0.3
Breaks: libx11-6 (<< 2:1.4.1)
Description: X11 client-side library
 This package provides the locale data files for libx11.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libx11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2485
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.7.5-1ubuntu0.3
Replaces: x11proto-dev (<< 2019.2)
Depends: libx11-6 (= 2:1.7.5-1ubuntu0.3), libxau-dev (>= 1:1.0.0-1), libxdmcp-dev (>= 1:1.0.0-1), x11proto-dev (>= 2019.2-1), xtrans-dev, libxcb1-dev
Suggests: libx11-doc
Description: X11 client-side library (development headers)
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 This package contains the development headers for the library found in
 libx11-6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libx11-xcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.7.5-1ubuntu0.3
Depends: libx11-6 (= 2:1.7.5-1ubuntu0.3)
Description: Xlib/XCB interface library
 libX11-xcb provides functions needed by clients which take advantage of
 Xlib/XCB to mix calls to both Xlib and XCB over the same X connection.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 More information about XCB can be found at:
 <URL:https://xcb.freedesktop.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libx265-199
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 15869
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: x265
Version: 3.5-2
Depends: libc6 (>= 2.34), libnuma1 (>= 2.0.11), libstdc++6 (>= 4.1.1)
Description: H.265/HEVC video stream encoder (shared library)
 libx265 is an encoding library for creating H.265/High Efficiency Video Coding
 (HEVC) video streams.
 .
 This package contains the shared library.
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Homepage: http://x265.org

Package: libxau-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.9-1build5
Depends: libxau6 (= 1:1.0.9-1build5), x11proto-dev
Description: X11 authorisation library (development headers)
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 This package contains the development headers for the library found in libxau6.
 Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libxau
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.9-1build5
Depends: libc6 (>= 2.33)
Description: X11 authorisation library
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libxau
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxaw7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 495
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxaw
Version: 2:1.0.14-1
Depends: libc6 (>= 2.15), libx11-6, libxext6, libxmu6 (>= 2:1.1.3), libxpm4, libxt6
Description: X11 Athena Widget library
 libXaw7 provides the second version of Xaw, the Athena Widgets toolkit,
 which is largely used by legacy X applications.  This version is the
 most common version, as version 6 is considered deprecated, and version
 8, which adds Xprint support, is unsupported and not widely used.
 In general, use of a more modern toolkit such as GTK+ is recommended.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXaw
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-dri2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, dri2 extension
 This package contains the library files needed to run software using
 libxcb-dri2, the dri2 extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-dri3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, dri3 extension
 This package contains the library files needed to run software using
 libxcb-dri3, the dri3 extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-glx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, glx extension
 This package contains the library files needed to run software using
 libxcb-glx, the glx extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-present0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, present extension
 This package contains the library files needed to run software using
 libxcb-present, the present extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-randr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1 (>= 1.9.2)
Description: X C Binding, randr extension
 This package contains the library files needed to run software using
 libxcb-randr, the randr extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-render0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.14), libxcb1 (>= 1.8)
Description: X C Binding, render extension
 This package contains the library files needed to run software using
 libxcb-render, the render extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-shape0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, shape extension
 This package contains the library files needed to run software using
 libxcb-shape, the shape extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-shm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, shm extension
 This package contains the library files needed to run software using
 libxcb-shm, the shm extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-sync1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.14), libxcb1
Description: X C Binding, sync extension
 This package contains the library files needed to run software using
 libxcb-sync, the sync extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb-xfixes0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, xfixes extension
 This package contains the library files needed to run software using
 libxcb-xfixes, the xfixes extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libc6 (>= 2.14), libxau6 (>= 1:1.0.9), libxdmcp6
Breaks: alsa-utils (<< 1.0.24.2-5)
Description: X C Binding
 This package contains the library files needed to run software using libxcb,
 the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcb1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 684
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.14-3ubuntu3
Depends: libxcb1 (= 1.14-3ubuntu3), libpthread-stubs0-dev, libxau-dev (>= 1:1.0.0-1), libxdmcp-dev (>= 1:1.0.0-1)
Suggests: libxcb-doc
Description: X C Binding, development files
 This package contains the header and library files needed to build software
 using libxcb, the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcomposite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcomposite
Version: 1:0.4.5-1build2
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1)
Description: X11 Composite extension library
 libXcomposite provides an X Window System client interface to the Composite
 extension to the X protocol.
 .
 The Composite extension allows clients called compositing managers to control
 the final drawing of the screen.  Rendering is done into an off-screen buffer.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXcomposite
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxcursor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxcursor
Version: 1:1.2.0-2build4
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxfixes3, libxrender1
Description: X cursor management library
 Xcursor is a simple library designed to help locate and load cursors for the
 X Window System.  Cursors can be loaded from files or memory and can exist in
 several sizes; the library automatically picks the best size.  When using
 images loaded from files, Xcursor prefers to use the Render extension's
 CreateCursor request for rendering cursors.  Where the Render extension is
 not supported, Xcursor maps the cursor image to a standard X cursor and uses
 the core X protocol CreateCursor request.
 .
 Preferred themes for cursors can be installed if desired, via
 xcursor-themes or other cursor-theme or icon-theme packages,
 configured with update-alternatives --config x-cursor-theme.
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxdamage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxdamage
Version: 1:1.1.5-2build2
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1)
Description: X11 damaged region extension library
 libXdamage provides an X Window System client interface to the DAMAGE
 extension to the X protocol.
 .
 The Damage extension provides for notification of when on-screen regions have
 been 'damaged' (altered).
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdamage
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxdmcp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.3-0ubuntu5
Depends: libxdmcp6 (= 1:1.1.3-0ubuntu5), x11proto-core-dev
Description: X11 authorisation library (development headers)
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 This package contains the development headers for the library found in
 libxdmcp6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.3-0ubuntu5
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4)
Description: X11 Display Manager Control Protocol library
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxext
Version: 2:1.3.4-1build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous extension library
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxfixes3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxfixes
Version: 1:6.0.0-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous 'fixes' extension library
 libXfixes provides an X Window System client interface to the 'XFIXES'
 extension to the X protocol.
 .
 It provides support for Region types, and some cursor functions.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXfixes
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxft2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xft
Version: 2.3.4-1
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.3.5), libx11-6, libxrender1
Description: FreeType-based font drawing library for X
 Xft provides a client-side font API for X applications, making the FreeType
 font rasterizer available to X clients.  Fontconfig is used for font
 specification resolution.  Where available, the RENDER extension handles
 glyph drawing; otherwise, the core X protocol is used.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxi
Version: 2:1.8-1build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Input extension library
 libXi provides an X Window System client interface to the XINPUT
 extension to the X protocol.
 .
 The Input extension allows setup and configuration of multiple input devices,
 and hotplugging of input devices (to be added and removed on the fly).
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXi
Homepage: https://www.x.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxinerama1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxinerama
Version: 2:1.1.4-3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Xinerama extension library
 libXinerama provides an X Window System client interface to the XINERAMA
 extension to the X protocol.
 .
 The Xinerama (also known as panoramiX) extension allows for multiple screens
 attached to a single display to be treated as belonging together, and to give
 desktop applications a better idea of the monitor layout.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXinerama
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxkbcommon0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 302
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxkbcommon
Version: 1.4.0-1
Depends: xkb-data, libc6 (>= 2.33)
Description: library interface to the XKB compiler - shared library
 This package provides a library to handle keyboard descriptions, including
 loading them from disk, parsing them and handling their state. It's mainly
 meant for client toolkits, window systems, and other system applications;
 currently that includes Wayland, kmscon, GTK+, Clutter, and more.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 https://github.com/xkbcommon/libxkbcommon.git
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: http://www.xkbcommon.org/

Package: libxkbfile1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 178
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxkbfile
Version: 1:1.1.0-1build3
Depends: libc6 (>= 2.14), libx11-6
Description: X11 keyboard file manipulation library
 libxkbfile provides an interface to read and manipulate description files for
 XKB, the X11 keyboard configuration extension.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libxkbfile
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxml2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2095
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 2.9.14+dfsg-0.1+ubuntu22.04.1+deb.sury.org+1
Depends: libc6 (>= 2.34), libicu70 (>= 70.1-1~), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3)
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.
Homepage: http://xmlsoft.org

Package: libxml2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3329
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxml2
Version: 2.9.14+dfsg-0.1+ubuntu22.04.1+deb.sury.org+1
Depends: libicu-dev, libxml2 (= 2.9.14+dfsg-0.1+ubuntu22.04.1+deb.sury.org+1)
Suggests: pkg-config
Description: Development files for the GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 Install this package if you wish to develop your own programs using
 the GNOME XML library.
Homepage: http://xmlsoft.org

Package: libxmlb2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxmlb
Version: 0.3.6-2build1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.53.2), liblzma5 (>= 5.1.1alpha+20120614)
Description: Binary XML library
 The libxmlb library takes XML source, and
 converts it to a structured binary representation with a deduplicated string
 table -- where the strings have the NULs included.
 .
 This allows an application to mmap the binary XML file, do an XPath query and
 return some strings without actually parsing the entire document. This is all
 done using (almost) zero allocations and no actual copying of the binary data.
Homepage: https://github.com/hughsie/libxmlb
Original-Maintainer: Debian EFI team <debian-efi@lists.debian.org>

Package: libxmlsec1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 435
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.33-1build2
Depends: libc6 (>= 2.14), libxml2 (>= 2.8.0), libxslt1.1 (>= 1.1.25)
Breaks: libreoffice-core (<< 1:6.0.5~rc2~)
Description: XML security library
 The XML Security Library implements standards related to secure handling
 of XML data.
 .
 This package provides dynamic libraries for use by applications.
 Specifically, it provides all XML security library functionality
 except for the cryptography engine.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxmlsec1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2894
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: xmlsec1
Version: 1.2.33-1build2
Depends: libc6-dev, libgcrypt20-dev, libgnutls28-dev, libnss3-dev, libssl-dev (>= 1.0.0), libxml2-dev (>= 2.8.0), libxmlsec1 (= 1.2.33-1build2), libxmlsec1-gcrypt (= 1.2.33-1build2), libxmlsec1-gnutls (= 1.2.33-1build2), libxmlsec1-nss (= 1.2.33-1build2), libxmlsec1-openssl (= 1.2.33-1build2), libxslt1-dev (>= 1.0.20)
Description: Development files for the XML security library
 The XML Security Library is a C library that implements these XML standards:
 .
    * XML Signature
    * XML Encryption
 .
 This package provides development files including documentation, examples,
 headers, static libraries, and configuration support.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxmlsec1-gcrypt
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 174
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.33-1build2
Depends: libc6 (>= 2.14), libgcrypt20 (>= 1.9.0), libxml2 (>= 2.8.0), libxmlsec1 (>= 1.2.33)
Description: Gcrypt engine for the XML security library
 The XML Security Library implements standards related to secure handling
 of XML data.
 .
 This package provides dynamic libraries for use by applications.
 Specifically, it provides the gcrypt implementation of the XML security
 library cryptography functions.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxmlsec1-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 135
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.33-1build2
Depends: libc6 (>= 2.4), libgnutls30 (>= 3.7.2), libxml2 (>= 2.8.0), libxmlsec1 (>= 1.2.33), libxmlsec1-gcrypt (>= 1.2.33)
Description: Gnutls engine for the XML security library
 The XML Security Library implements standards related to secure handling
 of XML data.
 .
 This package provides dynamic libraries for use by applications.
 Specifically, it provides the gnutls implementation of the XML security
 library cryptography functions.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxmlsec1-nss
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 231
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.33-1build2
Depends: libc6 (>= 2.14), libnspr4 (>= 2:4.10.9), libnss3 (>= 2:3.13.4-2~), libxml2 (>= 2.8.0), libxmlsec1 (>= 1.2.33)
Description: Nss engine for the XML security library
 The XML Security Library implements standards related to secure handling
 of XML data.
 .
 This package provides dynamic libraries for use by applications.
 Specifically, it provides the nss implementation of the XML security
 library cryptography functions.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxmlsec1-openssl
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 304
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.33-1build2
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.8.0), libxmlsec1 (>= 1.2.33)
Description: Openssl engine for the XML security library
 The XML Security Library implements standards related to secure handling
 of XML data.
 .
 This package provides dynamic libraries for use by applications.
 Specifically, it provides the openssl implementation of the XML security
 library cryptography functions.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxmu6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxmu
Version: 2:1.1.3-3
Depends: libc6 (>= 2.14), libx11-6, libxext6, libxt6
Description: X11 miscellaneous utility library
 libXmu provides a set of miscellaneous utility convenience functions for X
 libraries to use.  libXmuu is a lighter-weight version that does not depend
 on libXt or libXext; for more information, see libxmuu1.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXmu
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxmuu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxmu
Version: 2:1.1.3-3
Depends: libc6 (>= 2.4), libx11-6
Description: X11 miscellaneous micro-utility library
 libXmuu provides a set of miscellaneous utility convenience functions for X
 libraries to use.  It is a lighter version of libXmu that does not depend
 on libXt or libXext; for more information on libXmu, see libxmu6.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXmu
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxnvctrl0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Ubuntu MOTU Developers <ubuntu-motu@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nvidia-settings
Version: 510.47.03-0ubuntu1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.4.99.1), libxext6
Description: NV-CONTROL X extension (runtime library)
 The NV-CONTROL X extension provides a mechanism for X clients to
 query and set configuration parameters of the NVIDIA X driver.
 State set by the NV-CONTROL X extension is assumed to be persistent
 only for the current server generation.
 .
 This package contains the shared library.
Original-Maintainer: Debian NVIDIA Maintainers <pkg-nvidia-devel@lists.alioth.debian.org>

Package: libxpm4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxpm
Version: 1:3.5.12-1ubuntu0.22.04.2
Depends: libc6 (>= 2.33), libx11-6
Description: X11 pixmap library
 The X PixMap image format is an extension of the monochrome X BitMap
 format specified in the X protocol, and is commonly used in traditional
 X applications.
 .
 This package provides runtime support for XPM format.
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxrandr2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxrandr
Version: 2:1.5.2-1build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6, libxrender1
Description: X11 RandR extension library
 libXrandr provides an X Window System client interface to the RandR
 extension to the X protocol.
 .
 The RandR extension allows for run-time configuration of display attributes
 such as resolution, rotation, and reflection.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXrandr
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxrender1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxrender
Version: 1:0.9.10-1build4
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X Rendering Extension client library
 The X Rendering Extension (Render) introduces digital image composition as
 the foundation of a new rendering model within the X Window System.
 Rendering geometric figures is accomplished by client-side tessellation into
 either triangles or trapezoids.  Text is drawn by loading glyphs into the
 server and rendering sets of them.  The Xrender library exposes this
 extension to X clients.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXrender
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxshmfence1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxshmfence
Version: 1.3-1build4
Depends: libc6 (>= 2.27)
Description: X shared memory fences - shared library
 This library provides an interface to shared-memory fences for
 synchronization between the X server and direct-rendering clients.
 .
 This package contains the xshmfence shared library.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxslt1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2011
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.34-4ubuntu0.22.04.5
Provides: libxslt-dev
Depends: libxml2-dev (>= 2.6.26), libxslt1.1 (= 1.1.34-4ubuntu0.22.04.5)
Description: XSLT 1.0 processing library - development kit
 XSLT is an XML language for defining transformations of XML files from
 XML to some other arbitrary format, such as XML, HTML, plain text, etc.
 using standard XSLT stylesheets. libxslt is a C library which
 implements XSLT version 1.0.
 .
 This package contains the development files for libxslt.
Homepage: http://xmlsoft.org/xslt/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxslt1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 504
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.34-4ubuntu0.22.04.5
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.9.0), libxml2 (>= 2.9.0)
Description: XSLT 1.0 processing library - runtime library
 XSLT is an XML language for defining transformations of XML files from
 XML to some other arbitrary format, such as XML, HTML, plain text, etc.
 using standard XSLT stylesheets. libxslt is a C library which
 implements XSLT version 1.0.
 .
 This package contains the libxslt library used by applications for XSLT
 transformations.
Homepage: http://xmlsoft.org/xslt/
Original-Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>

Package: libxt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1371
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxt
Version: 1:1.2.1-1
Depends: libxt6 (= 1:1.2.1-1), libx11-dev, x11proto-dev, libsm-dev
Suggests: libxt-doc
Description: X11 toolkit intrinsics library (development headers)
 libXt provides the X Toolkit Intrinsics, an abstract widget library upon
 which other toolkits are based.  Xt is the basis for many toolkits, including
 the Athena widgets (Xaw), and LessTif (a Motif implementation).
 .
 This package contains the development headers for the library found in
 libxt6.  Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXt
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxt6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 467
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxt
Version: 1:1.2.1-1
Depends: libc6 (>= 2.33), libice6 (>= 1:1.0.0), libsm6, libx11-6
Description: X11 toolkit intrinsics library
 libXt provides the X Toolkit Intrinsics, an abstract widget library upon
 which other toolkits are based.  Xt is the basis for many toolkits, including
 the Athena widgets (Xaw), and LessTif (a Motif implementation).
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXt
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxtables12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.7-1ubuntu5.2
Replaces: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Depends: libc6 (>= 2.34)
Breaks: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Description: netfilter xtables library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 This package contains the user-space interface to the Netfilter xtables
 kernel framework.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>

Package: libxtst6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxtst
Version: 2:1.2.3-1build4
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6, x11-common
Description: X11 Testing -- Record extension library
 libXtst provides an X Window System client interface to the Record
 extension to the X protocol.
 .
 The Record extension allows X clients to synthesise input events, which
 is useful for automated testing.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXtst
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxv
Version: 2:1.0.11-1build2
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Video extension library
 libXv provides an X Window System client interface to the XVideo
 extension to the X protocol.
 .
 The XVideo extension allows for accelerated drawing of videos.  Hardware
 adaptors are exposed to clients, which may draw in a number of colourspaces,
 including YUV.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXv
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxxf86dga1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxxf86dga
Version: 2:1.1.5-0ubuntu3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Direct Graphics Access extension library
 libXxf86dga provides the XFree86-DGA extension, which allows direct
 graphics access to a framebuffer-like region, and also allows relative
 mouse reporting, et al.  It is mainly used by games and emulators for
 games.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXxf86dga
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxxf86vm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libxxf86vm
Version: 1:1.1.4-1build3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 XFree86 video mode extension library
 libXxf86vm provides an interface to the XFree86-VidModeExtension
 extension, which allows client applications to get and set video mode
 timings in extensive detail.  It is used by the xvidtune program in
 particular.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libxxhash0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xxhash
Version: 0.8.1-1
Depends: libc6 (>= 2.14)
Description: shared library for xxhash
 xxHash is an Extremely fast Hash algorithm, running at RAM speed limits.
 It successfully completes the SMHasher test suite which evaluates collision,
 dispersion and randomness qualities of hash functions. Code is highly portable,
 and hashes are identical on all platforms (little / big endian).
 .
 This package contains the shared library.
Original-Maintainer: Josue Ortega <josue@debian.org>
Homepage: https://cyan4973.github.io/xxHash

Package: libyajl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: yajl
Version: 2.1.0-3ubuntu0.22.04.1
Depends: libc6 (>= 2.14)
Description: Yet Another JSON Library
 A small, fast library for parsing JavaScript Object Notation (JSON).  It
 supports incremental parsing from a stream and leaves data representation to
 higher level code.
Homepage: http://lloyd.github.com/yajl/
Original-Maintainer: John Stamp <jstamp@users.sourceforge.net>

Package: libyaml-0-2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.2.2-1build2
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
 LibYAML is a C library for parsing and emitting data in YAML 1.1, a
 human-readable data serialization format.
Homepage: https://github.com/yaml/libyaml
Original-Maintainer: Anders Kaseorg <andersk@mit.edu>

Package: libyaml-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 251
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.2.2-1build2
Depends: libyaml-0-2 (= 0.2.2-1build2)
Suggests: libyaml-doc
Description: Fast YAML 1.1 parser and emitter library (development)
 LibYAML is a C library for parsing and emitting data in YAML 1.1, a
 human-readable data serialization format.
 .
 This package contains development headers and static libraries.
Homepage: https://github.com/yaml/libyaml
Original-Maintainer: Anders Kaseorg <andersk@mit.edu>

Package: libyelp0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 342
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: yelp
Version: 42.1-1ubuntu0.1
Depends: libbz2-1.0, libc6 (>= 2.14), libglib2.0-0 (>= 2.67.4), libgtk-3-0 (>= 3.13.3), liblzma5 (>= 5.1.1alpha+20120614), libsqlite3-0 (>= 3.5.9), libwebkit2gtk-4.0-37 (>= 2.19.2), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25)
Description: Library for the GNOME help browser
 Yelp is the help browser for the GNOME desktop.  Yelp provides a simple
 graphical interface for viewing DocBook, Mallard, HTML, man, and info
 formatted documentation.
 .
 This library contains widgets and utilities for use by Yelp.
Homepage: https://wiki.gnome.org/Apps/Yelp
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libyuv0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 531
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libyuv
Version: 0.0~git20220104.b91df1a-2
Replaces: libyuv
Provides: libyuv
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libjpeg8 (>= 8c), libstdc++6 (>= 5)
Conflicts: libyuv
Description: Library for YUV scaling (shared library)
 libyuv is an open source project that includes YUV scaling and
 conversion functionality.
 .
 This package provides the shared library.
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Homepage: https://chromium.googlesource.com/libyuv/libyuv/

Package: libzip4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libzip
Version: 1.7.3-1ubuntu2
Depends: libbz2-1.0, libc6 (>= 2.33), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.1.4)
Description: library for reading, creating, and modifying zip archives (runtime)
 libzip is a C library for reading, creating, and modifying zip archives. Files
 can be added from data buffers, files, or compressed data copied directly from
 other zip archives. Changes made without closing the archive can be reverted.
 .
 This package contains the files necessary for running applications that
 use the libzip library.
Homepage: https://libzip.org
Original-Maintainer: Stefan Schörghofer <amd1212@4md.gr>

Package: libzstd1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 846
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.4.8+dfsg-3build1
Depends: libc6 (>= 2.14)
Description: fast lossless compression algorithm
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the shared library.
Homepage: https://github.com/facebook/zstd
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>

Package: linux-base
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 156
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.5ubuntu9+22.04.1
Depends: debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/kernel/postinst.d/xx-update-initrd-links b41c8cb1275704cf344e3e87c84633b2
Description: Linux image base package
 This package contains files and support scripts for all Linux
 images.
Original-Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>

Package: linux-firmware
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 1113686
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20220329.git681281e4-0ubuntu3.40
Replaces: atmel-firmware, linux-firmware-snapdragon (<= 1.2-0ubuntu1), linux-restricted-common
Provides: atmel-firmware
Recommends: firmware-sof-signed
Breaks: linux-firmware-raspi2 (<= 1.20190819-0ubuntu2), linux-firmware-snapdragon (<= 1.2-0ubuntu1)
Conflicts: atmel-firmware
Description: Firmware for Linux kernel drivers
 This package provides firmware used by Linux kernel drivers.

Package: linux-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 21
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta
Version: 5.15.0.164.159
Depends: linux-image-generic (= 5.15.0.164.159), linux-headers-generic (= 5.15.0.164.159)
Description: Complete Generic Linux kernel and headers
 This package will always depend on the latest complete generic Linux kernel
 and headers.

Package: linux-headers-5.15.0-144
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 76301
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 5.15.0-144.157
Depends: coreutils
Description: Header files related to Linux kernel version 5.15.0
 This package provides kernel header files for version 5.15.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-5.15.0-144/debian.README.gz for details

Package: linux-headers-5.15.0-144-generic
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 24556
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-144.157
Provides: linux-headers, linux-headers-3.0
Depends: linux-headers-5.15.0-144, libc6 (>= 2.34), libelf1 (>= 0.142), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.2.3.3)
Description: Linux kernel headers for version 5.15.0 on 64 bit x86 SMP
 This package provides kernel header files for version 5.15.0 on
 64 bit x86 SMP.
 .
 This is for sites that want the latest kernel headers.  Please read
 /usr/share/doc/linux-headers-5.15.0-144/debian.README.gz for details.

Package: linux-headers-5.15.0-156
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 76336
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 5.15.0-156.166
Depends: coreutils
Description: Header files related to Linux kernel version 5.15.0
 This package provides kernel header files for version 5.15.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-5.15.0-156/debian.README.gz for details

Package: linux-headers-5.15.0-156-generic
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 24585
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-156.166
Provides: linux-headers, linux-headers-3.0
Depends: linux-headers-5.15.0-156, libc6 (>= 2.34), libelf1 (>= 0.142), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.2.3.3)
Description: Linux kernel headers for version 5.15.0 on 64 bit x86 SMP
 This package provides kernel header files for version 5.15.0 on
 64 bit x86 SMP.
 .
 This is for sites that want the latest kernel headers.  Please read
 /usr/share/doc/linux-headers-5.15.0-156/debian.README.gz for details.

Package: linux-headers-5.15.0-164
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 76369
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 5.15.0-164.174
Depends: coreutils
Description: Header files related to Linux kernel version 5.15.0
 This package provides kernel header files for version 5.15.0, for sites
 that want the latest kernel headers. Please read
 /usr/share/doc/linux-headers-5.15.0-164/debian.README.gz for details

Package: linux-headers-5.15.0-164-generic
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 24606
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-164.174
Provides: linux-headers, linux-headers-3.0
Depends: linux-headers-5.15.0-164, libc6 (>= 2.34), libelf1 (>= 0.142), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.2.3.3)
Description: Linux kernel headers for version 5.15.0 on 64 bit x86 SMP
 This package provides kernel header files for version 5.15.0 on
 64 bit x86 SMP.
 .
 This is for sites that want the latest kernel headers.  Please read
 /usr/share/doc/linux-headers-5.15.0-164/debian.README.gz for details.

Package: linux-headers-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 21
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta
Version: 5.15.0.164.159
Depends: linux-headers-5.15.0-164-generic
Description: Generic Linux kernel headers
 This package will always depend on the latest generic kernel headers
 available.

Package: linux-image-5.15.0-128-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 11474
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-128.138
Config-Version: 5.15.0-128.138
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-128-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-128-generic, linux-modules-extra-5.15.0-128-generic
Conflicts: linux-image-unsigned-5.15.0-128-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 5.15.0-128.138)

Package: linux-image-5.15.0-130-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 11474
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-130.140
Config-Version: 5.15.0-130.140
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-130-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-130-generic, linux-modules-extra-5.15.0-130-generic
Conflicts: linux-image-unsigned-5.15.0-130-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 5.15.0-130.140)

Package: linux-image-5.15.0-131-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 11475
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-131.141
Config-Version: 5.15.0-131.141
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-131-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-131-generic, linux-modules-extra-5.15.0-131-generic
Conflicts: linux-image-unsigned-5.15.0-131-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 5.15.0-131.141)

Package: linux-image-5.15.0-133-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 11471
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-133.144
Config-Version: 5.15.0-133.144
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-133-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-133-generic, linux-modules-extra-5.15.0-133-generic
Conflicts: linux-image-unsigned-5.15.0-133-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 5.15.0-133.144)

Package: linux-image-5.15.0-142-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 11465
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-142.152
Config-Version: 5.15.0-142.152
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-142-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-142-generic, linux-modules-extra-5.15.0-142-generic
Conflicts: linux-image-unsigned-5.15.0-142-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 5.15.0-142.152)

Package: linux-image-5.15.0-144-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 11469
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-144.157
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-144-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-144-generic, linux-modules-extra-5.15.0-144-generic
Conflicts: linux-image-unsigned-5.15.0-144-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 5.15.0-144.157)

Package: linux-image-5.15.0-153-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 11471
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-153.163
Config-Version: 5.15.0-153.163
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-153-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-153-generic, linux-modules-extra-5.15.0-153-generic
Conflicts: linux-image-unsigned-5.15.0-153-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 5.15.0-153.163)

Package: linux-image-5.15.0-156-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 11475
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-156.166
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-156-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-156-generic, linux-modules-extra-5.15.0-156-generic
Conflicts: linux-image-unsigned-5.15.0-156-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 5.15.0-156.166)

Package: linux-image-5.15.0-164-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 11479
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.15.0-164.174
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.15.0-164-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.15.0, linux-tools, linux-headers-5.15.0-164-generic, linux-modules-extra-5.15.0-164-generic
Conflicts: linux-image-unsigned-5.15.0-164-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 5.15.0-164.174)

Package: linux-image-5.4.0-105-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 13377
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.4.0-105.119
Config-Version: 5.4.0-105.119
Provides: aufs-dkms, fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, virtualbox-guest-dkms, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-105-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.4.0, linux-tools, linux-headers-5.4.0-105-generic
Conflicts: linux-image-unsigned-5.4.0-105-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's UEFI/Opal signing key.
Built-Using: linux (= 5.4.0-105.119)

Package: linux-image-5.4.0-62-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 11444
Maintainer: Canonical Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-signed
Version: 5.4.0-62.70
Config-Version: 5.4.0-62.70
Provides: aufs-dkms, fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, virtualbox-guest-dkms, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-5.4.0-62-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-doc | linux-source-5.4.0, linux-tools, linux-headers-5.4.0-62-generic
Conflicts: linux-image-unsigned-5.4.0-62-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's UEFI/Opal signing key.
Built-Using: linux (= 5.4.0-62.70)

Package: linux-image-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 21
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux-meta
Version: 5.15.0.164.159
Provides: spl-modules (= 2.1.5-1ubuntu6~22.04.6), v4l2loopback-modules (= 0.12.7-2ubuntu2~22.04.1), virtualbox-guest-modules (= 5.15.0-164), wireguard-modules (= 1.0.0), zfs-modules (= 2.1.5-1ubuntu6~22.04.6)
Depends: linux-image-5.15.0-164-generic, linux-modules-extra-5.15.0-164-generic, linux-firmware, intel-microcode, amd64-microcode
Recommends: thermald
Description: Generic Linux kernel image
 This package will always depend on the latest generic kernel image
 available.

Package: linux-libc-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 7097
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: linux
Version: 5.15.0-164.174
Replaces: linux-kernel-headers
Provides: aufs-dev, linux-kernel-headers
Conflicts: linux-kernel-headers
Description: Linux Kernel Headers for development
 This package provides headers from the Linux kernel.  These headers
 are used by the installed headers for GNU glibc and other system
 libraries. They are NOT meant to be used to build third-party modules for
 your kernel. Use linux-headers-* packages for that.

Package: linux-modules-5.15.0-128-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 113343
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-128.138
Config-Version: 5.15.0-128.138
Depends: linux-image-5.15.0-128-generic | linux-image-unsigned-5.15.0-128-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.15.0-130-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 113343
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-130.140
Config-Version: 5.15.0-130.140
Depends: linux-image-5.15.0-130-generic | linux-image-unsigned-5.15.0-130-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.15.0-131-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 113343
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-131.141
Config-Version: 5.15.0-131.141
Depends: linux-image-5.15.0-131-generic | linux-image-unsigned-5.15.0-131-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.15.0-133-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 113365
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-133.144
Config-Version: 5.15.0-133.144
Depends: linux-image-5.15.0-133-generic | linux-image-unsigned-5.15.0-133-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.15.0-142-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 113491
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-142.152
Config-Version: 5.15.0-142.152
Depends: linux-image-5.15.0-142-generic | linux-image-unsigned-5.15.0-142-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.15.0-144-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 113507
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-144.157
Depends: linux-image-5.15.0-144-generic | linux-image-unsigned-5.15.0-144-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.15.0-153-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 113525
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-153.163
Config-Version: 5.15.0-153.163
Depends: linux-image-5.15.0-153-generic | linux-image-unsigned-5.15.0-153-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.15.0-156-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 113566
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-156.166
Depends: linux-image-5.15.0-156-generic | linux-image-unsigned-5.15.0-156-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.15.0-164-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 113656
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-164.174
Depends: linux-image-5.15.0-164-generic | linux-image-unsigned-5.15.0-164-generic
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.4.0-105-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 75995
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.4.0-105.119
Config-Version: 5.4.0-105.119
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-5.4.0-62-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 71703
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.4.0-62.70
Config-Version: 5.4.0-62.70
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.15.0-128-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 344706
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-128.138
Config-Version: 5.15.0-128.138
Depends: linux-image-5.15.0-128-generic | linux-image-unsigned-5.15.0-128-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.15.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.15.0-130-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 344705
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-130.140
Config-Version: 5.15.0-130.140
Depends: linux-image-5.15.0-130-generic | linux-image-unsigned-5.15.0-130-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.15.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.15.0-131-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 344706
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-131.141
Config-Version: 5.15.0-131.141
Depends: linux-image-5.15.0-131-generic | linux-image-unsigned-5.15.0-131-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.15.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.15.0-133-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 344734
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-133.144
Config-Version: 5.15.0-133.144
Depends: linux-image-5.15.0-133-generic | linux-image-unsigned-5.15.0-133-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.15.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.15.0-142-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 344645
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-142.152
Config-Version: 5.15.0-142.152
Depends: linux-image-5.15.0-142-generic | linux-image-unsigned-5.15.0-142-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.15.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.15.0-144-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 344681
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-144.157
Depends: linux-image-5.15.0-144-generic | linux-image-unsigned-5.15.0-144-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.15.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.15.0-153-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 344694
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-153.163
Config-Version: 5.15.0-153.163
Depends: linux-image-5.15.0-153-generic | linux-image-unsigned-5.15.0-153-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.15.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.15.0-156-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 344717
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-156.166
Depends: linux-image-5.15.0-156-generic | linux-image-unsigned-5.15.0-156-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.15.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.15.0-164-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 344802
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.15.0-164.174
Depends: linux-image-5.15.0-164-generic | linux-image-unsigned-5.15.0-164-generic, wireless-regdb
Description: Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.15.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.4.0-105-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 197589
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.4.0-105.119
Config-Version: 5.4.0-105.119
Depends: linux-image-5.4.0-105-generic | linux-image-unsigned-5.4.0-105-generic, crda | wireless-crda
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.4.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-5.4.0-62-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 185483
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: amd64
Source: linux
Version: 5.4.0-62.70
Config-Version: 5.4.0-62.70
Depends: linux-image-5.4.0-62-generic | linux-image-unsigned-5.4.0-62-generic, crda | wireless-crda
Description: Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 5.4.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: locales
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 17068
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: glibc
Version: 2.35-0ubuntu3.11
Depends: libc-bin (>> 2.35), debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/locale.alias 4a3f5ef911616822ec6fe04e31930bbf
Description: GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains tools to generate locale definitions from source
 files (included in this package). It allows you to customize which
 definitions actually get generated. This is a space-saver over how this
 package used to be, with all locales generated by default. This created
 a package that unpacked to an excess of 30 megs.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 888
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.8.1-2ubuntu2.2
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Breaks: util-linux (<< 2.32-0.2~)
Conflicts: python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs 905e8b2d452e98ee5d9ac93adfcfdc8b
 /etc/pam.d/login 5afbc06eb5f71fef25170cf3c936a442
Description: system login tools
 This package provides some required infrastructure for logins and for
 changing effective user or group IDs, including:
  * login, the program that invokes a user shell on a virtual terminal;
  * nologin, a dummy shell for disabled user accounts;
  * su, a basic tool for executing commands as root or another user.
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 167
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.19.0-1ubuntu1.1
Depends: cron | anacron | cron-daemon | systemd-sysv, libacl1 (>= 2.2.23), libc6 (>= 2.34), libpopt0 (>= 1.14), libselinux1 (>= 3.1~)
Suggests: bsd-mailx | mailx
Conffiles:
 /etc/cron.daily/logrotate 31da718265eaaa2fdabcfb2743bda171
 /etc/logrotate.conf b0a820970ecd7412a334ade9c98de3f6
 /etc/logrotate.d/btmp 55631862595faf6432786dc335eb3f44
 /etc/logrotate.d/wtmp 46cd7ecb1810441bd450987a976f5540
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.
Homepage: https://github.com/logrotate/logrotate
Original-Maintainer: Christian Göttsche <cgzones@googlemail.com>

Package: logsave
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs
Version: 1.46.5-2ubuntu1.2
Replaces: e2fsprogs (<< 1.45.3-1)
Depends: libc6 (>= 2.34)
Breaks: e2fsprogs (<< 1.45.3-1)
Description: save the output of a command in a log file
 The logsave program will execute cmd_prog with the specified
 argument(s), and save a copy of its output to logfile.  If the
 containing directory for logfile does not exist, logsave will
 accumulate the output in memory until it can be written out.  A copy
 of the output will also be written to standard output.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 11.1.0ubuntu4
Description: Linux Standard Base init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: https://wiki.linuxfoundation.org/lsb/start
Original-Maintainer: Debian sysvinit maintainers <debian-init-diversity@chiark.greenend.org.uk>

Package: lsb-release
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 66
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 11.1.0ubuntu4
Depends: python3:any, distro-info-data
Recommends: apt
Description: Linux Standard Base version reporting utility
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb-release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 LSB conformance will not be reported unless the required metapackages are
 installed.
 .
 While it is intended for use by LSB packages, this command may also
 be useful for programmatically distinguishing between a pure Debian
 installation and derived distributions.
Homepage: https://wiki.linuxfoundation.org/lsb/start
Original-Maintainer: Debian sysvinit maintainers <debian-init-diversity@chiark.greenend.org.uk>

Package: lshw
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 921
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 02.19.git.2021.06.19.996aaad9c7-2build1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Recommends: pci.ids, usb.ids
Description: information about hardware configuration
 A small tool to provide detailed information on the hardware
 configuration of the machine. It can report exact memory
 configuration, firmware version, mainboard configuration, CPU version
 and speed, cache configuration, bus speed, etc. on DMI-capable x86
 systems, on some PowerPC machines (PowerMac G4 is known to work) and AMD64.
 .
 Information can be output in plain text, HTML or XML.
Homepage: https://github.com/lyonel/lshw
Original-Maintainer: Ghe Rivero <ghe@debian.org>

Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 447
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.93.2+dfsg-1.1build2
Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~), libtirpc3 (>= 1.0.2)
Suggests: perl
Description: utility to list open files
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.
Homepage: https://github.com/lsof-org/lsof
Original-Maintainer: Andres Salomon <dilinger@debian.org>

Package: lto-disabled-list
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 39
Maintainer: Matthias Klose <doko@ubuntu.com>
Architecture: all
Version: 24
Description: list of packages not to build with LTO
 A list of source packages not to build with link time
 optimization (LTO).
 .
 Entries in this list should have a bug report filed with
 the (user) tag 'lto'.

Package: ltrace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 332
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.7.3-6.1ubuntu6.22.04.1
Depends: libc6 (>= 2.34), libelf1 (>= 0.131), libselinux1 (>= 3.1~)
Conffiles:
 /etc/ltrace.conf f67e1097893416df68c30b65ed908992
Description: Tracks runtime library calls in dynamically linked programs
 ltrace is a debugging program which runs a specified command until it
 exits.  While the command is executing, ltrace intercepts and records
 the dynamic library calls which are called by
 the executed process and the signals received by that process.
 It can also intercept and print the system calls executed by the program.
 .
 The program to be traced need not be recompiled for this, so you can
 use it on binaries for which you don't have the source handy.
 .
 You should install ltrace if you need a sysadmin tool for tracking the
 execution of processes.
Original-Maintainer: Juan Cespedes <cespedes@debian.org>

Package: lua-bitop
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.0.2-5
Replaces: liblua5.1-bitop0 (<< 1.0.1-6~)
Provides: liblua5.1-bitop0, lua5.1-bitop, lua5.2-bitop
Depends: libc6 (>= 2.4)
Breaks: liblua5.1-bitop0 (<< 1.0.1-6~)
Description: fast bit manipulation library for the Lua language
 This package contains the Lua bitop fast bit manipulation library.
Original-Maintainer: Enrico Tassi <gareuselesinge@debian.org>
Homepage: http://bitop.luajit.org
Lua-Versions: 5.1 5.2

Package: lua-cjson
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 2.1.0+dfsg-2.1
Provides: lua5.1-cjson, lua5.2-cjson
Depends: libc6 (>= 2.14)
Description: JSON parser/encoder for Lua
 This library allows you to easily convert Lua values to JSON strings and back.
 Features:
  * Fast, standards compliant encoding/parsing routines
  * Full support for JSON with UTF-8, including decoding surrogate pairs
  * Optional run-time support for common exceptions to the JSON
    specification (infinity, NaN,..)
  * No dependencies on other libraries
Original-Maintainer: The Debian Lua Team <pkg-lua-devel@lists.alioth.debian.org>
Homepage: http://www.kyne.com.au/~mark/software/lua-cjson.php
Lua-Versions: 5.1 5.2

Package: lvm2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 4033
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.03.11-2.1ubuntu5
Depends: libaio1 (>= 0.3.93), libblkid1 (>= 2.24.2), libc6 (>= 2.34), libdevmapper-event1.02.1 (>= 2:1.02.74), libedit2 (>= 2.11-20080614-0), libselinux1 (>= 3.1~), libsystemd0 (>= 222), libudev1 (>= 183), lsb-base, dmsetup (>= 2:1.02.175-2.1ubuntu5~), dmeventd (>= 2:1.02.175-2.1ubuntu5~)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: thin-provisioning-tools
Conffiles:
 /etc/init.d/lvm2 70063dce3a90eca5ef673579e5fcc402
 /etc/init.d/lvm2-lvmpolld 6ee7740a641d91e302d3fbfe42a14942
 /etc/lvm/lvm.conf ab4fc5f2986ceaade6a005f65f23dc26
 /etc/lvm/lvmlocal.conf eeccf159eb1e1af87ca0c141235822b2
 /etc/lvm/profile/cache-mq.profile 9df1883c03bac9d3041e75745cb5e0ec
 /etc/lvm/profile/cache-smq.profile d27b7f0947c6ac21944c05e6098b9850
 /etc/lvm/profile/command_profile_template.profile 3bab119bec857c31a53725da2d0a9408
 /etc/lvm/profile/lvmdbusd.profile ffa904d375ce53ebb6befe7d65cf391a
 /etc/lvm/profile/metadata_profile_template.profile bccbaf503cb8f0adb5b4f841f7c1f735
 /etc/lvm/profile/thin-generic.profile f57ede2b5b249024766c51a223e15ed5
 /etc/lvm/profile/thin-performance.profile f4de81439550553043e04f019a48a827
 /etc/lvm/profile/vdo-small.profile da26d10e71e517a6f02ff0d53395e3c9
Description: Linux Logical Volume Manager
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>

Package: m4
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 346
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.18-5ubuntu2
Depends: libc6 (>= 2.34), libsigsegv2 (>= 2.9)
Suggests: m4-doc
Description: macro processing language
 GNU `m4' is an implementation of the traditional UNIX macro
 processor.  It is mostly SVR4 compatible, although it has some
 extensions (for example, handling more than 9 positional parameters to
 macros).  `m4' also has builtin functions for including files, running
 shell commands, doing arithmetic, etc.  Autoconf needs GNU `m4' for
 generating `configure' scripts, but not for running them.
Homepage: https://www.gnu.org/software/m4/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: mailcap
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 88
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.70+nmu1ubuntu1
Replaces: mime-support (<< 3.65)
Provides: run-mailcap
Depends: perl, media-types
Recommends: bzip2, file, xz-utils
Breaks: mime-support (<< 3.65)
Conffiles:
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: Debian's mailcap system, and support programs
 The mailcap system associates media types with programs that can handle them,
 using system and user configuration files.  A file's media type is determined
 by its extension or by running the "file" command if available.
 .
 Other packages register their programs as viewers/editors/composers/etc by
 placing mailcap entry files or FreeDesktop menu entries in predetermined
 directories monitored by this package's dpkg triggers.
 .
 This package provides a "run-mailcap" program to open arbitrary files, and in
 addition the "see", "edit", "compose", and "print" aliases to display, alter,
 create, and print (respectively).
 .
 This package also provides the "debian-view" utility to handle Debian packages
 interactively.
Original-Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>

Package: make
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 416
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: make-dfsg
Version: 4.3-4.1build1
Replaces: make-guile
Depends: libc6 (>= 2.34)
Suggests: make-doc
Conflicts: make-guile
Description: utility for directing compilation
 GNU Make is a utility which controls the generation of executables
 and other target files of a program from the program's source
 files. It determines automatically which pieces of a large program
 need to be (re)created, and issues the commands to (re)create
 them. Make can be used to organize any task in which targets (files)
 are to be automatically updated based on input files whenever the
 corresponding input is newer --- it is not limited to building
 computer programs. Indeed, Make is a general purpose dependency
 solver.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>
Homepage: https://www.gnu.org/software/make/

Package: man-db
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 2824
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.10.2-1
Replaces: man, nlsutils
Provides: man, man-browser
Depends: bsdextrautils | bsdmainutils (<< 12.1.1~), groff-base, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libgdbm6 (>= 1.16), libpipeline1 (>= 1.5.0), libseccomp2 (>= 2.1.0), zlib1g (>= 1:1.1.4)
Suggests: apparmor, groff, less, www-browser
Conflicts: man
Conffiles:
 /etc/apparmor.d/usr.bin.man 4f614d75041882370498f7fe2d43a44b
 /etc/cron.daily/man-db 857c7372869b8f2105d316c606472d24
 /etc/cron.weekly/man-db 7d3f58916b8a9840cd602991375e7781
 /etc/manpath.config 77d8f48dc5c371248a79d1add5a68707
Description: tools for reading manual pages
 This package provides the man command, the primary way of examining the
 system help files (manual pages). Other utilities provided include the
 whatis and apropos commands for searching the manual page database, the
 manpath utility for determining the manual page search path, and the
 maintenance utilities mandb, catman and zsoelim. man-db uses the groff
 suite of programs to format and display the manual pages.
Homepage: https://nongnu.org/man-db/

Package: manpages
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 1669
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 5.10-1ubuntu1
Replaces: attr (<< 1:2.4.47-3), keyutils (<< 1.6-1), manpages-dev (<< 5.09-2)
Suggests: man-browser
Breaks: attr (<< 1:2.4.47-3), keyutils (<< 1.6-1), manpages-dev (<< 5.09-2)
Description: Manual pages about using a GNU/Linux system
 This package contains GNU/Linux manual pages for these sections:
  4 = Devices (e.g. hd, sd).
  5 = File formats and protocols, syntaxes of several system
      files (e.g. wtmp, /etc/passwd, nfs).
  7 = Conventions and standards, macro packages, etc.
      (e.g. nroff, ascii).
 .
 Sections 1, 6 and 8 are provided by the respective applications. This
 package only includes the intro man page describing the section.
 .
 The man pages describe syntaxes of several system files.
Homepage: https://www.kernel.org/doc/man-pages/
Original-Maintainer: Dr. Tobias Quathamer <toddy@debian.org>

Package: manpages-dev
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 3942
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: manpages
Version: 5.10-1ubuntu1
Replaces: libattr1-dev (<< 1:2.4.47-3), libbsd-dev (<< 0.8.4-1)
Depends: manpages
Suggests: man-browser
Breaks: libattr1-dev (<< 1:2.4.47-3), libbsd-dev (<< 0.8.4-1), manpages (<< 5.09-2)
Description: Manual pages about using GNU/Linux for development
 These man pages describe the Linux programming interface, including
 these two sections:
  2 = Linux system calls.
  3 = Library calls (note that a more comprehensive source of information
      may be found in the glibc-doc and glibc-doc-reference packages).
Homepage: https://www.kernel.org/doc/man-pages/
Original-Maintainer: Dr. Tobias Quathamer <toddy@debian.org>

Package: mariadb-client-10.6
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 28008
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mariadb-10.6
Version: 1:10.6.22-0ubuntu0.22.04.1
Replaces: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-5.5, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6 (<< 1:10.6.22-0ubuntu0.22.04.1), mariadb-server-10.0, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mytop, virtual-mysql-client
Provides: virtual-mysql-client
Depends: debianutils (>= 1.6), libconfig-inifiles-perl, mariadb-client-core-10.6 (>= 1:10.6.22-0ubuntu0.22.04.1), perl:any, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 4.1.1), zlib1g (>= 1:1.1.4)
Recommends: libdbd-mariadb-perl | libdbd-mysql-perl, libdbi-perl, libterm-readkey-perl
Breaks: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-5.5, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6 (<< 1:10.6.22-0ubuntu0.22.04.1), mariadb-server-10.0, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0
Conflicts: mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mytop, virtual-mysql-client
Conffiles:
 /etc/mysql/mariadb.conf.d/50-client.cnf a8028d231dad4d2658bfd8b0db11f85e
 /etc/mysql/mariadb.conf.d/50-mysql-clients.cnf 2e0e48974b270cb20c2b66aa71f6cd92
 /etc/mysql/mariadb.conf.d/60-galera.cnf e2f4b79114ba923199ead4b7e94eee70
Description: MariaDB database client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the client binaries and the additional tools
 innotop and mariadb-report (mysqlreport).
Homepage: https://mariadb.org/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: mariadb-client-core-10.6
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 11857
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mariadb-10.6
Version: 1:10.6.22-0ubuntu0.22.04.1
Replaces: mariadb-client-10.0, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6 (<< 1:10.6.22-0ubuntu0.22.04.1), mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-server-server-5.7, percona-server-server-8.0, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, percona-xtradb-cluster-server-8.0, virtual-mysql-client-core
Provides: virtual-mysql-client-core
Depends: libmariadb3 (>= 10.5.4), mariadb-common (>= 1:10.6.22-0ubuntu0.22.04.1), libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libgcc-s1 (>= 3.0), libncurses6 (>= 6), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 4.1.1), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4)
Breaks: mariadb-client-10.0, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6 (<< 1:10.6.22-0ubuntu0.22.04.1), mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-server-server-5.7, percona-server-server-8.0, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, percona-xtradb-cluster-server-8.0
Conflicts: mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, virtual-mysql-client-core
Description: MariaDB database core client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core client files, as used by Akonadi.
Homepage: https://mariadb.org/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: mariadb-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: mariadb-10.6
Version: 1:10.6.22-0ubuntu0.22.04.1
Depends: mysql-common (>= 5.6.25)
Conffiles:
 /etc/mysql/mariadb.cnf f78499dd07dccc3238cc15dd937b87bb
Description: MariaDB common configuration files
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes configuration files common to all MariaDB programs.
Homepage: https://mariadb.org/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: mariadb-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: mariadb-10.6
Version: 1:10.6.22-0ubuntu0.22.04.1
Depends: mariadb-server-10.6 (>= 1:10.6.22-0ubuntu0.22.04.1)
Description: MariaDB database server (metapackage depending on the latest version)
 This is an empty package that depends on the current "best" version of
 mariadb-server (currently mariadb-server-10.6), as determined by the MariaDB
 maintainers. Install this package if in doubt about which MariaDB
 version you need. That will install the version recommended by the
 package maintainers.
 .
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
Homepage: https://mariadb.org/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: mariadb-server-10.6
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 67428
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mariadb-10.6
Version: 1:10.6.22-0ubuntu0.22.04.1
Replaces: handlersocket-mysql-5.5, mariadb-galera-server, mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-client-5.5, mysql-client-5.7, mysql-client-core-8.0, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server
Provides: virtual-mysql-server
Depends: galera-4 (>= 26.4), gawk, iproute2, libdbi-perl, lsb-base (>= 3.0-10), lsof, mariadb-client-10.6 (>= 1:10.6.22-0ubuntu0.22.04.1), mariadb-server-core-10.6 (>= 1:10.6.22-0ubuntu0.22.04.1), passwd, perl (>= 5.6), procps, psmisc, rsync, socat, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libpam0g (>= 0.99.7.1), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 11), zlib1g (>= 1:1.2.0)
Pre-Depends: adduser (>= 3.40), debconf, mariadb-common (>= 1:10.6.22-0ubuntu0.22.04.1)
Recommends: libhtml-template-perl
Suggests: mailx, mariadb-test, netcat-openbsd
Breaks: cqrlog (<< 1.9.0-5~), galera-3 (<< 26.4), handlersocket-mysql-5.5, mariadb-galera-server, mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-client-5.5, mysql-client-5.7, mysql-client-core-8.0, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0
Conflicts: handlersocket-mysql-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server
Conffiles:
 /etc/apparmor.d/usr.sbin.mariadbd dacafa122cb26bc12319782acc6aff47
 /etc/init.d/mariadb c14f3e0e5a00e19272d9fc3a908e246c
 /etc/logcheck/ignore.d.paranoid/mariadb-server-10_6 e0e3191cc12a25fdd6f57889a204295d
 /etc/logcheck/ignore.d.server/mariadb-server-10_6 92ad6cc603d633d8bb1fc7d6c3e45dc9
 /etc/logcheck/ignore.d.workstation/mariadb-server-10_6 92ad6cc603d633d8bb1fc7d6c3e45dc9
 /etc/logrotate.d/mariadb ba67a115a3498cf496a4ba8b20d82d45
 /etc/mysql/debian-start 7c7a26dd3e8564664b6dbbc2fc568330
 /etc/mysql/mariadb.conf.d/50-mysqld_safe.cnf ae130218a23989c3a504c95831610b4b
 /etc/mysql/mariadb.conf.d/50-server.cnf 682c93d1cf5888bc1f5aafe51da2d2e9
 /etc/security/user_map.conf 126cbe3b479937c707031f9576702be9
Description: MariaDB database server binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the server binaries.
Homepage: https://mariadb.org/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: mariadb-server-core-10.6
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 41450
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mariadb-10.6
Version: 1:10.6.22-0ubuntu0.22.04.1
Replaces: mariadb-client-10.1, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-10.6 (<< 1:10.6.22-0ubuntu0.22.04.1), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-5.5, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server-core
Provides: virtual-mysql-server-core
Depends: mariadb-common (>= 1:10.6.22-0ubuntu0.22.04.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libgcc-s1 (>= 3.0), liblz4-1 (>= 0.0~r130), libnuma1 (>= 2.0.11), libpcre2-8-0 (>= 10.22), libsnappy1v5 (>= 1.1.8), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 12), libsystemd0 (>= 227), liburing2 (>= 2.1), zlib1g (>= 1:1.2.0)
Breaks: mariadb-client-10.1, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-5.5, mysql-client-5.5, mysql-client-5.6, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Conflicts: mariadb-galera-server-5.5, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, virtual-mysql-server-core
Description: MariaDB database core server files
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core server files, as used by Akonadi.
Homepage: https://mariadb.org/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: mattermost
Status: install ok installed
Priority: optional
Section: base
Maintainer: Mattermost Team <info@mattermost.com>
Architecture: amd64
Version: 11.1.1-0
Description: Mattermost Server
 Mattermost is an open source, private cloud, Slack-alternative.

Package: mawk
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 229
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.4.20200120-3
Provides: awk
Depends: libc6 (>= 2.34)
Description: Pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.
Original-Maintainer: Boyuan Yang <byang@debian.org>
Homepage: https://invisible-island.net/mawk/

Package: media-types
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 7.0.0
Replaces: mime-support (<< 3.65)
Breaks: mime-support (<< 3.65)
Conffiles:
 /etc/mime.types 2e5f0c27e65400ea230c8a94be277b86
Description: List of standard media types and their usual file extension
 This package installs the configuration file /etc/mime.types, that lists
 standard media types (originally known as "MIME" types) and their usual file
 extension.  This provides a simple way for programs to have a first guess at a
 file's content.  On standard Debian desktop systems, one will also find more
 sophisticated tools, for instance provided by the "file" and "xdg-utils"
 packages.
 .
 The /etc/mime.types file is compiled by hand using mostly information provided
 by the Internet Assigned Numbers Authority (IANA).
Original-Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>

Package: mime-support
Status: install ok installed
Priority: important
Section: net
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.66
Depends: mailcap, media-types
Conffiles:
 /etc/mime.types f4631d08bcc92bf2dde274696d7b4b35 obsolete
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e obsolete
Description: transitional package
 This is a transitional package. It will be possible to remove it
 safely once its dependency chain has adjusted to depend on mailcap
 or media-types directly.
Original-Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>

Package: mlock
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: uw-imap
Version: 8:2007f~dfsg-7build1
Depends: libc6 (>= 2.34)
Description: mailbox locking program
 IMAP (Internet Message Access Protocol) is a method of accessing
 electronic messages kept on a (possibly shared) mail server.
 .
 The UW (University of Washington) IMAP toolkit provides the c-client
 mail-handling library supporting various network transport methods,
 file system storage formats, and authentication and authorization
 methods.
 .
 This package contains a program to lock mailbox files to avoid
 corruption.
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>
Homepage: http://www.washington.edu/imap/

Package: modsecurity-crs
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 826
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.3.2-1
Recommends: libapache2-mod-security2 (>= 2.8.0)
Suggests: lua, geoip-database-contrib, ruby, python
Conffiles:
 /etc/modsecurity/crs/REQUEST-900-EXCLUSION-RULES-BEFORE-CRS.conf 3dd2a7c35539d7289b579733b3fa4eb7
 /etc/modsecurity/crs/RESPONSE-999-EXCLUSION-RULES-AFTER-CRS.conf 29506cb7125905f1bcd1aa5e6c87a3d1
 /etc/modsecurity/crs/crs-setup.conf 5639900e3eac1854ca4d402fc3665101
Description: OWASP ModSecurity Core Rule Set
 modsecurity provides critical protections against attacks across most every
 web architecture. CRS is based on generic rules which focus on attack payload
 identification in order to provide protection from zero day and unknown
 vulnerabilities often found in web applications, which are in most cases
 custom coded.
 .
 Core Rules use the following techniques: HTTP request validation, HTTP
 protocol anomalies, Global constraints, HTTP Usage policy, Malicious client
 software detection, Generic Attack Detection (SQL injection, Cross Site
 Scripting, OS Command Injection, ColdFusion, PHP and ASP injection, etc.),
 Trojans & Backdoors Detection, Error Detection, XML Protection, Search Engine
 Monitoring.
Original-Maintainer: Alberto Gonzalez Iniesta <agi@inittab.org>
Homepage: https://coreruleset.org

Package: mongodb-database-tools
Status: install ok installed
Priority: optional
Section: database
Maintainer: MongoDB Connectors Team <database-tools-packaging@mongodb.com>
Architecture: amd64
Version: 100.14.0
Replaces: mongodb-database-tools (<= 100.14.0), mongodb-org-tools (<= 4.3.2), mongodb-org-tools-unstable (<= 4.3.2), mongodb-enterprise-tools (<= 4.3.2), mongodb-enterprise-tools-unstable (<= 4.3.2)
Provides: mongodb-database-tools
Depends: libc6, libgssapi-krb5-2, libkrb5-3, libk5crypto3, libcomerr2, libkrb5support0, libkeyutils1
Breaks: mongodb-org-tools (<= 4.3.2), mongodb-org-tools-unstable (<= 4.3.2), mongodb-enterprise-tools (<= 4.3.2), mongodb-enterprise-tools-unstable (<= 4.3.2)
Conflicts: mongodb-database-tools
Description: mongodb-database-tools package provides tools for working with the MongoDB server: 
 *bsondump - display BSON files in a human-readable format
 *mongoimport - Convert data from JSON, TSV or CSV and insert them into a collection
 *mongoexport - Write an existing collection to CSV or JSON format
 *mongodump/mongorestore - Dump MongoDB backups to disk in .BSON format, 
    or restore them to a live database
 *mongostat - Monitor live MongoDB servers, replica sets, or sharded clusters
 *mongofiles - Read, write, delete, or update files in GridFS 
    (see: http://docs.mongodb.org/manual/core/gridfs/)
 *mongotop - Monitor read/write activity on a mongo server
Homepage: http://www.mongodb.com

Package: mongodb-mongosh
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 281437
Maintainer: Compass Team <compass@mongodb.com>
Architecture: amd64
Version: 2.6.0
Provides: mongodb-shell (= 2.0)
Depends: libc6 (>= 2.17)
Recommends: libgssapi-krb5-2
Description: MongoDB Shell CLI REPL Package
Homepage: https://github.com/mongodb-js/mongosh

Package: mongodb-org
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 8
Maintainer: MongoDB Packaging <packaging@mongodb.com>
Architecture: amd64
Version: 7.0.28
Depends: mongodb-org-database, mongodb-org-tools, mongodb-mongosh
Conflicts: mongo-10gen, mongo-10gen-enterprise, mongo-10gen-enterprise-server, mongo-10gen-server, mongo-10gen-unstable, mongo-10gen-unstable-enterprise, mongo-10gen-unstable-enterprise-mongos, mongo-10gen-unstable-enterprise-server, mongo-10gen-unstable-enterprise-shell, mongo-10gen-unstable-enterprise-tools, mongo-10gen-unstable-mongos, mongo-10gen-unstable-server, mongo-10gen-unstable-shell, mongo-10gen-unstable-tools, mongo18-10gen, mongo18-10gen-server, mongo20-10gen, mongo20-10gen-server, mongodb, mongodb-10gen, mongodb-10gen-enterprise, mongodb-10gen-unstable, mongodb-10gen-unstable-enterprise, mongodb-10gen-unstable-enterprise-mongos, mongodb-10gen-unstable-enterprise-server, mongodb-10gen-unstable-enterprise-shell, mongodb-10gen-unstable-enterprise-tools, mongodb-10gen-unstable-mongos, mongodb-10gen-unstable-server, mongodb-10gen-unstable-shell, mongodb-10gen-unstable-tools, mongodb-clients, mongodb-dev, mongodb-enterprise, mongodb-enterprise-mongos, mongodb-enterprise-server, mongodb-enterprise-shell, mongodb-enterprise-tools, mongodb-enterprise-unstable, mongodb-enterprise-unstable-mongos, mongodb-enterprise-unstable-server, mongodb-enterprise-unstable-shell, mongodb-enterprise-unstable-tools, mongodb-nightly, mongodb-org-unstable, mongodb-org-unstable-mongos, mongodb-org-unstable-server, mongodb-org-unstable-shell, mongodb-org-unstable-tools, mongodb-server, mongodb-stable, mongodb18-10gen, mongodb20-10gen
Description: MongoDB open source document-oriented database system (metapackage)
 MongoDB is built for scalability, performance and high availability, scaling from single server deployments to large, complex multi-site architectures. By leveraging in-memory computing, MongoDB provides high performance for both reads and writes. MongoDB’s native replication and automated failover enable enterprise-grade reliability and operational flexibility.
 .
 MongoDB is an open-source database used by companies of all sizes, across all industries and for a wide variety of applications. It is an agile database that allows schemas to change quickly as applications evolve, while still providing the functionality developers expect from traditional databases, such as secondary indexes, a full query language and strict consistency.
 .
 MongoDB has a rich client ecosystem including hadoop integration, officially supported drivers for 10 programming languages and environments, as well as 40 drivers supported by the user community.
 .
 MongoDB features:
 * JSON Data Model with Dynamic Schemas
 * Auto-Sharding for Horizontal Scalability
 * Built-In Replication for High Availability
 * Rich Secondary Indexes, including geospatial
 * TTL indexes
 * Text Search
 * Aggregation Framework & Native MapReduce
 .
 This metapackage will install the mongo shell, import/export tools, other client utilities, server software, default configuration, and init.d scripts.
Homepage: http://www.mongodb.org

Package: mongodb-org-database
Status: hold ok installed
Priority: optional
Section: database
Installed-Size: 13
Maintainer: MongoDB Packaging <packaging@mongodb.com>
Architecture: amd64
Source: mongodb-org
Version: 6.0.20
Depends: mongodb-org-shell, mongodb-org-server, mongodb-org-mongos, mongodb-org-database-tools-extra
Conflicts: mongo-10gen, mongo-10gen-enterprise, mongo-10gen-enterprise-server, mongo-10gen-server, mongo-10gen-unstable, mongo-10gen-unstable-enterprise, mongo-10gen-unstable-enterprise-mongos, mongo-10gen-unstable-enterprise-server, mongo-10gen-unstable-enterprise-shell, mongo-10gen-unstable-enterprise-tools, mongo-10gen-unstable-mongos, mongo-10gen-unstable-server, mongo-10gen-unstable-shell, mongo-10gen-unstable-tools, mongo18-10gen, mongo18-10gen-server, mongo20-10gen, mongo20-10gen-server, mongodb, mongodb-10gen, mongodb-10gen-enterprise, mongodb-10gen-unstable, mongodb-10gen-unstable-enterprise, mongodb-10gen-unstable-enterprise-mongos, mongodb-10gen-unstable-enterprise-server, mongodb-10gen-unstable-enterprise-shell, mongodb-10gen-unstable-enterprise-tools, mongodb-10gen-unstable-mongos, mongodb-10gen-unstable-server, mongodb-10gen-unstable-shell, mongodb-10gen-unstable-tools, mongodb-clients, mongodb-dev, mongodb-enterprise, mongodb-enterprise-mongos, mongodb-enterprise-server, mongodb-enterprise-shell, mongodb-enterprise-tools, mongodb-enterprise-unstable, mongodb-enterprise-unstable-mongos, mongodb-enterprise-unstable-server, mongodb-enterprise-unstable-shell, mongodb-enterprise-unstable-tools, mongodb-nightly, mongodb-org-unstable, mongodb-org-unstable-mongos, mongodb-org-unstable-server, mongodb-org-unstable-shell, mongodb-org-unstable-tools, mongodb-server, mongodb-stable, mongodb18-10gen, mongodb20-10gen
Description: MongoDB open source document-oriented database system (metapackage)
 MongoDB is built for scalability, performance and high availability, scaling from single server deployments to large, complex multi-site architectures. By leveraging in-memory computing, MongoDB provides high performance for both reads and writes. MongoDB’s native replication and automated failover enable enterprise-grade reliability and operational flexibility.
 .
 MongoDB is an open-source database used by companies of all sizes, across all industries and for a wide variety of applications. It is an agile database that allows schemas to change quickly as applications evolve, while still providing the functionality developers expect from traditional databases, such as secondary indexes, a full query language and strict consistency.
 .
 MongoDB has a rich client ecosystem including hadoop integration, officially supported drivers for 10 programming languages and environments, as well as 40 drivers supported by the user community.
 .
 MongoDB features:
 * JSON Data Model with Dynamic Schemas
 * Auto-Sharding for Horizontal Scalability
 * Built-In Replication for High Availability
 * Rich Secondary Indexes, including geospatial
 * TTL indexes
 * Text Search
 * Aggregation Framework & Native MapReduce
 .
 This metapackage will install the mongo shell, import/export tools, other client utilities, server software, default configuration, and init.d scripts.
Homepage: http://www.mongodb.org

Package: mongodb-org-database-tools-extra
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 27
Maintainer: MongoDB Packaging <packaging@mongodb.com>
Architecture: amd64
Source: mongodb-org
Version: 7.0.28
Replaces: mongodb-org-tools (<= 4.2)
Breaks: mongodb-org-tools (<= 4.2)
Conflicts: mongo-10gen, mongo-10gen-enterprise, mongo-10gen-enterprise-server, mongo-10gen-server, mongo-10gen-unstable, mongo-10gen-unstable-enterprise, mongo-10gen-unstable-enterprise-mongos, mongo-10gen-unstable-enterprise-server, mongo-10gen-unstable-enterprise-shell, mongo-10gen-unstable-enterprise-tools, mongo-10gen-unstable-mongos, mongo-10gen-unstable-server, mongo-10gen-unstable-shell, mongo-10gen-unstable-tools, mongo18-10gen, mongo18-10gen-server, mongo20-10gen, mongo20-10gen-server, mongodb, mongodb-10gen, mongodb-10gen-enterprise, mongodb-10gen-unstable, mongodb-10gen-unstable-enterprise, mongodb-10gen-unstable-enterprise-mongos, mongodb-10gen-unstable-enterprise-server, mongodb-10gen-unstable-enterprise-shell, mongodb-10gen-unstable-enterprise-tools, mongodb-10gen-unstable-mongos, mongodb-10gen-unstable-server, mongodb-10gen-unstable-shell, mongodb-10gen-unstable-tools, mongodb-clients, mongodb-dev, mongodb-enterprise, mongodb-enterprise-database-tools-extra, mongodb-enterprise-mongos, mongodb-enterprise-server, mongodb-enterprise-shell, mongodb-enterprise-tools, mongodb-enterprise-unstable, mongodb-enterprise-unstable-database-tools-extra, mongodb-enterprise-unstable-mongos, mongodb-enterprise-unstable-server, mongodb-enterprise-unstable-shell, mongodb-enterprise-unstable-tools, mongodb-nightly, mongodb-org-unstable, mongodb-org-unstable-database-tools-extra, mongodb-org-unstable-mongos, mongodb-org-unstable-server, mongodb-org-unstable-shell, mongodb-org-unstable-tools, mongodb-server, mongodb-stable, mongodb18-10gen, mongodb20-10gen
Description: Extra MongoDB database tools
 MongoDB is built for scalability, performance and high availability, scaling from single server deployments to large, complex multi-site architectures. By leveraging in-memory computing, MongoDB provides high performance for both reads and writes. MongoDB’s native replication and automated failover enable enterprise-grade reliability and operational flexibility.
 .
 MongoDB is an open-source database used by companies of all sizes, across all industries and for a wide variety of applications. It is an agile database that allows schemas to change quickly as applications evolve, while still providing the functionality developers expect from traditional databases, such as secondary indexes, a full query language and strict consistency.
 .
 MongoDB has a rich client ecosystem including hadoop integration, officially supported drivers for 10 programming languages and environments, as well as 40 drivers supported by the user community.
 .
 MongoDB features:
 * JSON Data Model with Dynamic Schemas
 * Auto-Sharding for Horizontal Scalability
 * Built-In Replication for High Availability
 * Rich Secondary Indexes, including geospatial
 * TTL indexes
 * Text Search
 * Aggregation Framework & Native MapReduce
 .
 This package contains extra database tools, like the Compass installer.
Homepage: http://www.mongodb.org

Package: mongodb-org-mongos
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 128570
Maintainer: MongoDB Packaging <packaging@mongodb.com>
Architecture: amd64
Source: mongodb-org
Version: 7.0.28
Depends: libc6 (>= 2.34), libcurl4 (>= 7.16.2), libgcc-s1 (>= 4.2), libssl3 (>= 3.0.0~~alpha1), tzdata
Conflicts: mongo-10gen, mongo-10gen-enterprise, mongo-10gen-enterprise-server, mongo-10gen-server, mongo-10gen-unstable, mongo-10gen-unstable-enterprise, mongo-10gen-unstable-enterprise-mongos, mongo-10gen-unstable-enterprise-server, mongo-10gen-unstable-enterprise-shell, mongo-10gen-unstable-enterprise-tools, mongo-10gen-unstable-mongos, mongo-10gen-unstable-server, mongo-10gen-unstable-shell, mongo-10gen-unstable-tools, mongo18-10gen, mongo18-10gen-server, mongo20-10gen, mongo20-10gen-server, mongodb, mongodb-10gen, mongodb-10gen-enterprise, mongodb-10gen-unstable, mongodb-10gen-unstable-enterprise, mongodb-10gen-unstable-enterprise-mongos, mongodb-10gen-unstable-enterprise-server, mongodb-10gen-unstable-enterprise-shell, mongodb-10gen-unstable-enterprise-tools, mongodb-10gen-unstable-mongos, mongodb-10gen-unstable-server, mongodb-10gen-unstable-shell, mongodb-10gen-unstable-tools, mongodb-clients, mongodb-dev, mongodb-enterprise, mongodb-enterprise-mongos, mongodb-enterprise-server, mongodb-enterprise-shell, mongodb-enterprise-tools, mongodb-enterprise-unstable, mongodb-enterprise-unstable-mongos, mongodb-enterprise-unstable-server, mongodb-enterprise-unstable-shell, mongodb-enterprise-unstable-tools, mongodb-nightly, mongodb-org-unstable, mongodb-org-unstable-mongos, mongodb-org-unstable-server, mongodb-org-unstable-shell, mongodb-org-unstable-tools, mongodb-server, mongodb-stable, mongodb18-10gen, mongodb20-10gen
Description: MongoDB sharded cluster query router
 MongoDB is built for scalability, performance and high availability, scaling from single server deployments to large, complex multi-site architectures. By leveraging in-memory computing, MongoDB provides high performance for both reads and writes. MongoDB’s native replication and automated failover enable enterprise-grade reliability and operational flexibility.
 .
 MongoDB is an open-source database used by companies of all sizes, across all industries and for a wide variety of applications. It is an agile database that allows schemas to change quickly as applications evolve, while still providing the functionality developers expect from traditional databases, such as secondary indexes, a full query language and strict consistency.
 .
 MongoDB has a rich client ecosystem including hadoop integration, officially supported drivers for 10 programming languages and environments, as well as 40 drivers supported by the user community.
 .
 MongoDB features:
 * JSON Data Model with Dynamic Schemas
 * Auto-Sharding for Horizontal Scalability
 * Built-In Replication for High Availability
 * Rich Secondary Indexes, including geospatial
 * TTL indexes
 * Text Search
 * Aggregation Framework & Native MapReduce
 .
 This package contains mongos, the MongoDB sharded cluster query router.
Homepage: http://www.mongodb.org

Package: mongodb-org-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 180190
Maintainer: MongoDB Packaging <packaging@mongodb.com>
Architecture: amd64
Source: mongodb-org
Version: 7.0.28
Depends: libc6 (>= 2.34), libcurl4 (>= 7.16.2), libgcc-s1 (>= 4.2), libssl3 (>= 3.0.0~~alpha1), adduser, tzdata
Conflicts: mongo-10gen, mongo-10gen-enterprise, mongo-10gen-enterprise-server, mongo-10gen-server, mongo-10gen-unstable, mongo-10gen-unstable-enterprise, mongo-10gen-unstable-enterprise-mongos, mongo-10gen-unstable-enterprise-server, mongo-10gen-unstable-enterprise-shell, mongo-10gen-unstable-enterprise-tools, mongo-10gen-unstable-mongos, mongo-10gen-unstable-server, mongo-10gen-unstable-shell, mongo-10gen-unstable-tools, mongo18-10gen, mongo18-10gen-server, mongo20-10gen, mongo20-10gen-server, mongodb, mongodb-10gen, mongodb-10gen-enterprise, mongodb-10gen-unstable, mongodb-10gen-unstable-enterprise, mongodb-10gen-unstable-enterprise-mongos, mongodb-10gen-unstable-enterprise-server, mongodb-10gen-unstable-enterprise-shell, mongodb-10gen-unstable-enterprise-tools, mongodb-10gen-unstable-mongos, mongodb-10gen-unstable-server, mongodb-10gen-unstable-shell, mongodb-10gen-unstable-tools, mongodb-clients, mongodb-dev, mongodb-enterprise, mongodb-enterprise-mongos, mongodb-enterprise-server, mongodb-enterprise-shell, mongodb-enterprise-tools, mongodb-enterprise-unstable, mongodb-enterprise-unstable-mongos, mongodb-enterprise-unstable-server, mongodb-enterprise-unstable-shell, mongodb-enterprise-unstable-tools, mongodb-nightly, mongodb-org-unstable, mongodb-org-unstable-mongos, mongodb-org-unstable-server, mongodb-org-unstable-shell, mongodb-org-unstable-tools, mongodb-server, mongodb-stable, mongodb18-10gen, mongodb20-10gen
Conffiles:
 /etc/mongod.conf 2774028e2effcd12e9cbe2c83505f922
Description: MongoDB database server
 MongoDB is built for scalability, performance and high availability, scaling from single server deployments to large, complex multi-site architectures. By leveraging in-memory computing, MongoDB provides high performance for both reads and writes. MongoDB’s native replication and automated failover enable enterprise-grade reliability and operational flexibility.
 .
 MongoDB is an open-source database used by companies of all sizes, across all industries and for a wide variety of applications. It is an agile database that allows schemas to change quickly as applications evolve, while still providing the functionality developers expect from traditional databases, such as secondary indexes, a full query language and strict consistency.
 .
 MongoDB has a rich client ecosystem including hadoop integration, officially supported drivers for 10 programming languages and environments, as well as 40 drivers supported by the user community.
 .
 MongoDB features:
 * JSON Data Model with Dynamic Schemas
 * Auto-Sharding for Horizontal Scalability
 * Built-In Replication for High Availability
 * Rich Secondary Indexes, including geospatial
 * TTL indexes
 * Text Search
 * Aggregation Framework & Native MapReduce
 .
 This package contains the MongoDB server software, default configuration files, and init.d scripts.
Homepage: http://www.mongodb.org

Package: mongodb-org-shell
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 12
Maintainer: MongoDB Packaging <packaging@mongodb.com>
Architecture: amd64
Source: mongodb-org
Version: 7.0.28
Conflicts: mongo-10gen, mongo-10gen-enterprise, mongo-10gen-enterprise-server, mongo-10gen-server, mongo-10gen-unstable, mongo-10gen-unstable-enterprise, mongo-10gen-unstable-enterprise-mongos, mongo-10gen-unstable-enterprise-server, mongo-10gen-unstable-enterprise-shell, mongo-10gen-unstable-enterprise-tools, mongo-10gen-unstable-mongos, mongo-10gen-unstable-server, mongo-10gen-unstable-shell, mongo-10gen-unstable-tools, mongo18-10gen, mongo18-10gen-server, mongo20-10gen, mongo20-10gen-server, mongodb, mongodb-10gen, mongodb-10gen-enterprise, mongodb-10gen-unstable, mongodb-10gen-unstable-enterprise, mongodb-10gen-unstable-enterprise-mongos, mongodb-10gen-unstable-enterprise-server, mongodb-10gen-unstable-enterprise-shell, mongodb-10gen-unstable-enterprise-tools, mongodb-10gen-unstable-mongos, mongodb-10gen-unstable-server, mongodb-10gen-unstable-shell, mongodb-10gen-unstable-tools, mongodb-clients, mongodb-dev, mongodb-enterprise, mongodb-enterprise-mongos, mongodb-enterprise-server, mongodb-enterprise-shell, mongodb-enterprise-tools, mongodb-enterprise-unstable, mongodb-enterprise-unstable-mongos, mongodb-enterprise-unstable-server, mongodb-enterprise-unstable-shell, mongodb-enterprise-unstable-tools, mongodb-nightly, mongodb-org-unstable, mongodb-org-unstable-mongos, mongodb-org-unstable-server, mongodb-org-unstable-shell, mongodb-org-unstable-tools, mongodb-server, mongodb-stable, mongodb18-10gen, mongodb20-10gen
Description: MongoDB shell client
 MongoDB is built for scalability, performance and high availability, scaling from single server deployments to large, complex multi-site architectures. By leveraging in-memory computing, MongoDB provides high performance for both reads and writes. MongoDB’s native replication and automated failover enable enterprise-grade reliability and operational flexibility.
 .
 MongoDB is an open-source database used by companies of all sizes, across all industries and for a wide variety of applications. It is an agile database that allows schemas to change quickly as applications evolve, while still providing the functionality developers expect from traditional databases, such as secondary indexes, a full query language and strict consistency.
 .
 MongoDB has a rich client ecosystem including hadoop integration, officially supported drivers for 10 programming languages and environments, as well as 40 drivers supported by the user community.
 .
 MongoDB features:
 * JSON Data Model with Dynamic Schemas
 * Auto-Sharding for Horizontal Scalability
 * Built-In Replication for High Availability
 * Rich Secondary Indexes, including geospatial
 * TTL indexes
 * Text Search
 * Aggregation Framework & Native MapReduce
 .
 This package contains the mongo shell.
Homepage: http://www.mongodb.org

Package: mongodb-org-tools
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 8
Maintainer: MongoDB Packaging <packaging@mongodb.com>
Architecture: amd64
Source: mongodb-org
Version: 7.0.28
Depends: mongodb-database-tools, mongodb-org-database-tools-extra
Conflicts: mongo-10gen, mongo-10gen-enterprise, mongo-10gen-enterprise-server, mongo-10gen-server, mongo-10gen-unstable, mongo-10gen-unstable-enterprise, mongo-10gen-unstable-enterprise-mongos, mongo-10gen-unstable-enterprise-server, mongo-10gen-unstable-enterprise-shell, mongo-10gen-unstable-enterprise-tools, mongo-10gen-unstable-mongos, mongo-10gen-unstable-server, mongo-10gen-unstable-shell, mongo-10gen-unstable-tools, mongo18-10gen, mongo18-10gen-server, mongo20-10gen, mongo20-10gen-server, mongodb, mongodb-10gen, mongodb-10gen-enterprise, mongodb-10gen-unstable, mongodb-10gen-unstable-enterprise, mongodb-10gen-unstable-enterprise-mongos, mongodb-10gen-unstable-enterprise-server, mongodb-10gen-unstable-enterprise-shell, mongodb-10gen-unstable-enterprise-tools, mongodb-10gen-unstable-mongos, mongodb-10gen-unstable-server, mongodb-10gen-unstable-shell, mongodb-10gen-unstable-tools, mongodb-clients, mongodb-dev, mongodb-enterprise, mongodb-enterprise-mongos, mongodb-enterprise-server, mongodb-enterprise-shell, mongodb-enterprise-tools, mongodb-enterprise-unstable, mongodb-enterprise-unstable-mongos, mongodb-enterprise-unstable-server, mongodb-enterprise-unstable-shell, mongodb-enterprise-unstable-tools, mongodb-nightly, mongodb-org-unstable, mongodb-org-unstable-mongos, mongodb-org-unstable-server, mongodb-org-unstable-shell, mongodb-org-unstable-tools, mongodb-server, mongodb-stable, mongodb18-10gen, mongodb20-10gen
Description: MongoDB tools
 MongoDB is built for scalability, performance and high availability, scaling from single server deployments to large, complex multi-site architectures. By leveraging in-memory computing, MongoDB provides high performance for both reads and writes. MongoDB’s native replication and automated failover enable enterprise-grade reliability and operational flexibility.
 .
 MongoDB is an open-source database used by companies of all sizes, across all industries and for a wide variety of applications. It is an agile database that allows schemas to change quickly as applications evolve, while still providing the functionality developers expect from traditional databases, such as secondary indexes, a full query language and strict consistency.
 .
 MongoDB has a rich client ecosystem including hadoop integration, officially supported drivers for 10 programming languages and environments, as well as 40 drivers supported by the user community.
 .
 MongoDB features:
 * JSON Data Model with Dynamic Schemas
 * Auto-Sharding for Horizontal Scalability
 * Built-In Replication for High Availability
 * Rich Secondary Indexes, including geospatial
 * TTL indexes
 * Text Search
 * Aggregation Framework & Native MapReduce
 .
 This metapackage exists to simplfy acquisition of both the database tools and the extra database tools.
Homepage: http://www.mongodb.org

Package: mount
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 389
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libmount1 (>= 2.37.2), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.33)
Suggests: nfs-common
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: mpi-default-bin
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 10
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mpi-defaults
Version: 1.14
Depends: openmpi-bin
Description: Standard MPI runtime programs (metapackage)
 This metapackage depends on the runtime programs of the recommended MPI
 implementation for each platform, currently Open MPI on all of the platforms
 where it exists, and MPICH on the others. The package which this depends on
 has alternatives links for mpirun and mpiexec.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>

Package: mpi-default-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 13
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mpi-defaults
Version: 1.14
Depends: libopenmpi-dev
Description: Standard MPI development files (metapackage)
 This metapackage depends on the development files of the recommended MPI
 implementation for each platform, currently Open MPI on all of the platforms
 where it exists, and MPICH on the others. The package which this depends on
 has alternatives links for the shared libraries libmpi and libmpi++, and for
 compilers mpicc, mpic++/mpicxx/mpiCC, mpif77 and mpi90 and their manpages.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>

Package: mtr-tiny
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 157
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mtr
Version: 0.95-1
Replaces: mtr
Depends: libc6 (>= 2.34), libjansson4 (>= 2.0.1), libncurses6 (>= 6), libtinfo6 (>= 6)
Breaks: mtr, suidmanager (<< 0.50)
Description: Full screen ncurses traceroute tool
 mtr combines the functionality of the 'traceroute' and 'ping' programs
 in a single network diagnostic tool.
 .
 As mtr starts, it investigates the network connection between the host
 mtr runs on and a user-specified destination host.  After it
 determines the address of each network hop between the machines,
 it sends a sequence of ICMP ECHO requests to each one to determine the
 quality of the link to each machine.  As it does this, it prints
 running statistics about each machine.
 .
 mtr-tiny is compiled without support for X and conserves disk space.
Original-Maintainer: Robert Woodcock <rcw@debian.org>
Homepage: https://www.bitwizard.nl/mtr/

Package: mysql-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 34
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: mysql-defaults (1.0.8)
Version: 5.8+1.0.8
Replaces: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Provides: mysql-common-5.6
Breaks: mariadb-common (<< 10.0.20-3~)
Conflicts: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Conffiles:
 /etc/mysql/conf.d/mysql.cnf 61e0993270966cc6bc96b46c01ade21f
 /etc/mysql/conf.d/mysqldump.cnf 20890decb4486ce539753193908fb356
 /etc/mysql/my.cnf.fallback cfe2bc1819d5e200eca8ca6912f714af
Description: MySQL database common files, e.g. /etc/mysql/my.cnf
 MySQL is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MySQL are speed, robustness and
 ease of use.
 .
 This package includes files needed by all versions of the client library,
 e.g. /etc/mysql/my.cnf.
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: mysql-server-8.0
Status: deinstall ok config-files
Priority: optional
Section: database
Installed-Size: 1549
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: mysql-8.0
Version: 8.0.41-0ubuntu0.22.04.1
Config-Version: 8.0.41-0ubuntu0.22.04.1
Provides: virtual-mysql-server
Depends: lsb-base (>= 3.0-10), mysql-client-8.0 (>= 8.0.41-0ubuntu0.22.04.1), mysql-common (>= 5.8+1.0.4~), mysql-server-core-8.0 (= 8.0.41-0ubuntu0.22.04.1), passwd, perl:any (>= 5.6), psmisc, debconf (>= 0.5) | debconf-2.0
Pre-Depends: adduser (>= 3.40), debconf, mysql-common (>= 5.5)
Recommends: libhtml-template-perl, mecab-ipadic-utf8
Suggests: mailx, tinyca
Conflicts: mariadb-server-10.1, mariadb-server-10.3, mysql-server-5.7, virtual-mysql-server
Conffiles:
 /etc/apparmor.d/usr.sbin.mysqld 941a78c0a133e472415158bac1722077
 /etc/init.d/mysql 89a1a5b6ad710389112802fc3fbb81e1
 /etc/init/mysql.conf 5b097f4a577d63c60a8f6ca01b12bc47
 /etc/logcheck/ignore.d.paranoid/mysql-server-8_0 6babe46e791059cdd5a26f4f7fec9eca
 /etc/logcheck/ignore.d.server/mysql-server-8_0 2d34a7ed83fefc165cd1dfea3a72ccc8
 /etc/logcheck/ignore.d.workstation/mysql-server-8_0 2d34a7ed83fefc165cd1dfea3a72ccc8
 /etc/logrotate.d/mysql-server b3c32cbc55b042b1fe76698c8e928974
 /etc/mysql/debian-start 68f4d300f151fd3facec50d0bcf009ef obsolete
 /etc/mysql/mysql.cnf f5d3113b607567fd2ce955f4279fa9ce
 /etc/mysql/mysql.conf.d/mysql.cnf f65b16652d20305c87a7e28a1144954c
 /etc/mysql/mysql.conf.d/mysqld.cnf d017734c688c4e4b0a593b8dd94831d2
Description: MySQL database server binaries and system database setup
 MySQL is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MySQL are speed, robustness and
 ease of use.
 .
 This package contains all the infrastructure needed to setup system
 databases.
Homepage: http://dev.mysql.com/
Original-Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>

Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 860
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 6.2-1ubuntu0.1
Replaces: nano-tiny (<< 2.8.6-2), pico
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: hunspell
Breaks: nano-tiny (<< 2.8.6-2)
Conflicts: pico
Conffiles:
 /etc/nanorc b2c34817282284614d58163ef56df0d9
Description: small, friendly text editor inspired by Pico
 GNU nano is an easy-to-use text editor originally designed as a replacement
 for Pico, the ncurses-based editor from the non-free mailer package Pine
 (itself now available under the Apache License as Alpine).
 .
 However, GNU nano also implements many features missing in Pico, including:
  - undo/redo
  - line numbering
  - syntax coloring
  - soft-wrapping of overlong lines
  - selecting text by holding Shift
  - interactive search and replace (with regular expression support)
  - a go-to line (and column) command
  - support for multiple file buffers
  - auto-indentation
  - tab completion of filenames and search terms
  - toggling features while running
  - and full internationalization support
Homepage: https://www.nano-editor.org/
Original-Maintainer: Jordi Mallach <jordi@debian.org>

Package: ncal
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: bsdmainutils
Version: 12.1.7+nmu3ubuntu2
Replaces: bsdmainutils (<< 12.1.3)
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Breaks: bsdmainutils (<< 12.1.3)
Description: display a calendar and the date of Easter
 This package contains the "ncal" program and the traditional "cal"
 program, both are commonly found on BSD-style systems. This utility displays a
 simple calendar in a traditional or an alternative and more advanced layout,
 and the date of Easter.
Original-Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 393
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.3-2ubuntu0.1
Provides: ncurses-runtime
Breaks: bash-static (<< 4.4.18-1.1), libmono-corlib4.5-cil (<< 4.6.2.7+dfsg-2), libslang2 (<< 2.3.1a-3), libtinfo5 (<< 6.1), libunibilium0 (<< 2), libunibilium4 (<< 2.0.0-3), neovim (<< 0.6.0), zsh-static (<< 5.4.2-4)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 646
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.3-2ubuntu0.1
Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6.3)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: ncurses-term
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 4249
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.3-2ubuntu0.1
Replaces: alacritty (<< 0.3.4~), dvtm (<< 0.15-3), jfbterm (<< 0.4.7-10), kon2 (<< 0.3.9b-21), libiterm1 (<< 0.5-9), tn5250 (<< 0.17.4-3)
Depends: ncurses-base (>= 6.1+20190713)
Breaks: bash-static (<< 4.4.18-1.1), dvtm (<< 0.15-3), libmono-corlib4.5-cil (<< 4.6.2.7+dfsg-2), libslang2 (<< 2.3.1a-3), libtinfo5 (<< 6.1), libunibilium0 (<< 2), libunibilium4 (<< 2.0.0-3), zsh-static (<< 5.4.2-4)
Description: additional terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains all of the numerous terminal definitions not found in
 the ncurses-base package.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 800
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.60+git20181103.0eebece-1ubuntu5.4
Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~)
Description: NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://sourceforge.net/projects/net-tools/
Original-Maintainer: net-tools Team <team+net-tools@tracker.debian.org>

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 6.3
Replaces: ebtables (<< 2.0.11-2)
Breaks: ebtables (<< 2.0.11-2)
Conffiles:
 /etc/ethertypes cde059c510632569fb1869eb86cc026d
 /etc/protocols bb9c019d6524e913fd72441d58b68216
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/services 3975f0d8c4e1ecb25f035edfb1ba27ac
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.
 .
 In particular, it supplies common name-to-number mappings in /etc/services,
 /etc/rpc, /etc/protocols and /etc/ethertypes.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: netcat-openbsd
Status: install ok installed
Priority: important
Section: net
Installed-Size: 106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.218-4ubuntu1
Replaces: netcat (<< 1.10-35)
Provides: netcat
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.34)
Breaks: netcat (<< 1.10-35)
Description: TCP/IP swiss army knife
 A simple Unix utility which reads and writes data across network connections
 using TCP or UDP protocol. It is designed to be a reliable "back-end" tool
 that can be used directly or easily driven by other programs and scripts. At
 the same time it is a feature-rich network debugging and exploration tool,
 since it can create almost any kind of connection you would need and has
 several interesting built-in capabilities.
 .
 This package contains the OpenBSD rewrite of netcat, including support for
 IPv6, proxies, and Unix sockets.
Original-Maintainer: Guilhem Moulin <guilhem@debian.org>

Package: netpbm
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 5114
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: netpbm-free
Version: 2:10.0-15.4
Replaces: kdelibs4c2a, netpbm-dev, netpbm-nonfree, pbmwbmp, pnmtopng
Provides: pbmwbmp, pnmtopng
Depends: libnetpbm10 (= 2:10.0-15.4), libc6 (>= 2.33), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), zlib1g (>= 1:1.1.4)
Recommends: ghostscript
Conflicts: kdelibs4c2a, netpbm-dev (<= 2:9.10), netpbm-nonfree (<= 1:19940301.1-3), pbmwbmp, pnmtopng, ucbmpeg (<= 1r2-6)
Description: Graphics conversion tools between image formats
 Netpbm is a toolkit for manipulation of graphic images, including
 conversion of images between a variety of different formats. There
 are over 220 separate tools in the package including converters for
 more than 80 graphics formats.
Original-Maintainer: Andreas Barth <aba@not.so.argh.org>
Homepage: http://netpbm.alioth.debian.org

Package: netplan.io
Status: install ok installed
Priority: important
Section: net
Installed-Size: 495
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.106.1-7ubuntu0.22.04.4
Replaces: nplan (<< 0.34~)
Provides: nplan
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.70.0), libnetplan0 (= 0.106.1-7ubuntu0.22.04.4), libsystemd0 (>= 243), iproute2, python3, python3-dbus, python3-yaml, python3-netifaces, systemd (>= 248~)
Suggests: network-manager | wpasupplicant, openvswitch-switch, python3-rich, iw
Breaks: nplan (<< 0.34~)
Conflicts: netplan
Description: YAML network configuration abstraction for various backends
 netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
Homepage: https://netplan.io/
Original-Maintainer: Debian Netplan Maintainers <team+netplan@tracker.debian.org>

Package: nettle-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2804
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.7.3-1build2
Replaces: libnettle-dev
Depends: libnettle8 (= 3.7.3-1build2), libhogweed6 (= 3.7.3-1build2), libgmp-dev, dpkg (>= 1.15.4) | install-info
Conflicts: libnettle-dev
Description: low level cryptographic library (development files)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the development files (C headers and static libraries)
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>

Package: networkd-dispatcher
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.1-2ubuntu0.22.04.2
Depends: dbus, gir1.2-glib-2.0, python3-dbus, python3-gi, python3:any
Suggests: iw | wireless-tools
Conffiles:
 /etc/default/networkd-dispatcher 30d74108d00da7497f70395c32658a41
Description: Dispatcher service for systemd-networkd connection status changes
 Networkd-dispatcher is a dispatcher daemon for systemd-networkd
 connection status changes. It is similar to NetworkManager-dispatcher,
 but is much more limited in the types of events it supports due to the
 limited nature of systemd-networkd.
Homepage: https://github.com/craftyguy/networkd-dispatcher
Original-Maintainer: Julian Andres Klode <jak@debian.org>

Package: nftables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 177
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.2-1ubuntu3
Depends: libnftables1 (= 1.0.2-1ubuntu3), libc6 (>= 2.34), libedit2 (>= 3.1-20130611-0)
Recommends: netbase
Suggests: firewalld
Conffiles:
 /etc/nftables.conf b10493a168ed8e96d0d56408721425c4
Description: Program to control packet filtering rules by Netfilter project
 This software provides an in-kernel packet classification framework that is
 based on a network-specific Virtual Machine (VM) and the nft userspace
 command line tool. The nftables framework reuses the existing Netfilter
 subsystems such as the existing hook infrastructure, the connection tracking
 system, NAT, userspace queueing and logging subsystem.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>

Package: nghttp2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.43.0-1ubuntu0.2
Depends: nghttp2-client (>= 1.43.0-1ubuntu0.2), nghttp2-proxy (>= 1.43.0-1ubuntu0.2), nghttp2-server (>= 1.43.0-1ubuntu0.2)
Description: server, proxy and client implementing HTTP/2
 This package will install a set of programs implementing the HTTP/2
 protocol: a standalone server (nghttp2-server), a reverse proxy
 (nghttp2-proxy) and a client (nghttp2-client). It provides no files
 on its own and is not necessary for these programs to work.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>

Package: nghttp2-client
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 402
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: nghttp2
Version: 1.43.0-1ubuntu0.2
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1ubuntu0.2), lsb-base, libc6 (>= 2.34), libev4 (>= 1:4.04), libgcc-s1 (>= 3.3.1), libjansson4 (>= 2.0.1), libjemalloc2 (>= 5.0.0), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 12), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Description: client implementing HTTP/2 protocol
 This is a command line client implementing the HTTP/2 protocol. It
 gives access to many low-level and advanced aspects of the protocol
 and therefore is useful for debugging.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>

Package: nghttp2-proxy
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 1040
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: nghttp2
Version: 1.43.0-1ubuntu0.2
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1ubuntu0.2), lsb-base, openssl, python3, libc-ares2 (>= 1.7.0), libc6 (>= 2.34), libev4 (>= 1:4.04), libgcc-s1 (>= 3.3.1), libjemalloc2 (>= 5.0.0), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 11), libsystemd0, zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Conffiles:
 /etc/init.d/nghttpx 6c52e3e3c0bcbc2ca8c0a1f2c439c99f
 /etc/logrotate.d/nghttpx 15d2dfe87a59b5f311b05350203a181b
 /etc/nghttpx/nghttpx.conf 550b85a554419c560652faed3b347432
Description: reverse proxy implementing HTTP/2 protocol
 This is a standalone server implementing the HTTP/2 protocol with
 HTTP/1.1 fallback for clients that do not support it. It can be used
 as a frontend in front of web servers that do not support HTTP/2.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>

Package: nghttp2-server
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 157
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: nghttp2
Version: 1.43.0-1ubuntu0.2
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1ubuntu0.2), lsb-base, libc6 (>= 2.34), libev4 (>= 1:4.04), libgcc-s1 (>= 3.3.1), libjemalloc2 (>= 5.0.0), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 11), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Description: server implementing HTTP/2 protocol
 This is a standalone server implementing the HTTP/2 protocol with
 HTTP/1.1 fallback for clients that do not support it. It can be used
 to serve files from a local directory.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <tomasz@debian.org>

Package: nodejs
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 192199
Maintainer: NodeSource Support <support@nodesource.com>
Architecture: amd64
Version: 20.20.0-1nodesource1
Replaces: nodejs-dev (<= 0.8.22), nodejs-legacy, npm (<= 1.2.14)
Provides: nodejs-dev, nodejs-doc, nodejs-legacy, npm
Depends: libc6 (>= 2.28), libgcc1 (>= 1:3.4), libstdc++6 (>= 5.2), python3, ca-certificates
Conflicts: nodejs-dev, nodejs-doc, nodejs-legacy, npm
Description: Node.js event-based server-side javascript engine
 Node.js is similar in design to and influenced by systems like
 Ruby's Event Machine or Python's Twisted.
 .
 It takes the event model a bit further - it presents the event
 loop as a language construct instead of as a library.
 .
 Node.js is bundled with several useful libraries to handle server tasks :
 System, Events, Standard I/O, Modules, Timers, Child Processes, POSIX,
 HTTP, Multipart Parsing, TCP, DNS, Assert, Path, URL, Query Strings.
Homepage: https://nodejs.org

Package: ntfs-3g
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 1300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:2021.8.22-3ubuntu1.2
Depends: libc6 (>= 2.34), libgcrypt20 (>= 1.9.0), libgnutls30 (>= 3.7.2), libntfs-3g89 (= 1:2021.8.22-3ubuntu1.2)
Pre-Depends: fuse3
Description: read/write NTFS driver for FUSE
 NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS
 filesystem used by Microsoft Windows.
Homepage: https://github.com/tuxera/ntfs-3g/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: ntp
Status: deinstall ok config-files
Priority: optional
Section: net
Installed-Size: 2071
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:4.2.8p15+dfsg-1ubuntu2
Config-Version: 1:4.2.8p15+dfsg-1ubuntu2
Replaces: time-daemon
Provides: time-daemon
Depends: adduser, lsb-base (>= 3.2-13), netbase, tzdata, libc6 (>= 2.34), libcap2 (>= 1:2.10), libedit2 (>= 2.11-20080614-0), libopts25 (>= 1:5.18.16), libssl3 (>= 3.0.0~~alpha1)
Recommends: sntp, perl:any
Suggests: ntp-doc
Conflicts: time-daemon
Conffiles:
 /etc/NetworkManager/dispatcher.d/ntp 9b47f8044e4690b4efa94e636ba6359e
 /etc/apparmor.d/tunables/ntpd 5519e4c01535818cb26f2ef9e527f191
 /etc/apparmor.d/usr.sbin.ntpd 9c58c04b58df70cfab827173135abe1b
 /etc/cron.daily/ntp 2edb88a0b9b935161db3841b8b7421ab
 /etc/default/ntp cd7a62fbb18fa8fe5893dee93064b328
 /etc/dhcp/dhclient-exit-hooks.d/ntp 18f917c51f3110afa8fa74da376aafea
 /etc/init.d/ntp 57d5d284cf93f722faa05fc0bed4fcb6
 /etc/ntp.conf 10552d6aaf319d27890203e4c378c58b
Description: Network Time Protocol daemon and utility programs
 NTP, the Network Time Protocol, is used to keep computer clocks
 accurate by synchronizing them over the Internet or a local network,
 or by following an accurate hardware receiver that interprets GPS,
 DCF-77, NIST or similar time signals.
 .
 This package contains the NTP daemon and utility programs.  An NTP
 daemon needs to be running on each host that is to have its clock
 accuracy controlled by NTP.  The same NTP daemon is also used to
 provide NTP service to other hosts.
 .
 For more information about the NTP protocol and NTP server
 configuration and operation, install the package "ntp-doc".
Homepage: http://support.ntp.org/
Original-Maintainer: Debian NTP Team <ntp@packages.debian.org>

Package: ocl-icd-libopencl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ocl-icd
Version: 2.2.14-3
Replaces: amd-app, libopencl1, nvidia-libopencl1-dev
Provides: libopencl-1.1-1, libopencl-1.2-1, libopencl-2.0-1, libopencl-2.1-1, libopencl-2.2-1, libopencl-3.0-1, libopencl1
Depends: libc6 (>= 2.34)
Suggests: opencl-icd
Conflicts: amd-app, libopencl1, nvidia-libopencl1-dev
Description: Generic OpenCL ICD Loader
 OpenCL (Open Computing Language) is a multivendor open standard for
 general-purpose parallel programming of heterogeneous systems that include
 CPUs, GPUs and other processors.
 .
 This package contains an installable client driver loader (ICD Loader)
 library that can be used to load any (free or non-free) installable client
 driver (ICD) for OpenCL. It acts as a demultiplexer so several ICD can
 be installed and used together.
Original-Maintainer: Debian OpenCL Maintainers <pkg-opencl-devel@lists.alioth.debian.org>
Homepage: https://github.com/OCL-dev/ocl-icd

Package: openjdk-21-jdk
Status: install ok installed
Priority: optional
Section: java
Installed-Size: 2205
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openjdk-21
Version: 21.0.9+10-1~22.04
Provides: java-compiler, java-sdk (= 21), java10-sdk, java11-sdk, java12-sdk, java13-sdk, java14-sdk, java15-sdk, java16-sdk, java17-sdk, java18-sdk, java19-sdk, java2-sdk, java20-sdk, java21-sdk, java5-sdk, java6-sdk, java7-sdk, java8-sdk, java9-sdk
Depends: openjdk-21-jre (= 21.0.9+10-1~22.04), openjdk-21-jdk-headless (= 21.0.9+10-1~22.04), libc6 (>= 2.34), zlib1g (>= 1:1.1.4)
Recommends: libxt-dev
Suggests: openjdk-21-demo, openjdk-21-source, visualvm
Description: OpenJDK Development Kit (JDK)
 OpenJDK is a development environment for building applications,
 applets, and components using the Java programming language.
Homepage: https://openjdk.java.net/
Original-Maintainer: OpenJDK Team <openjdk-21@packages.debian.org>

Package: openjdk-21-jdk-headless
Status: install ok installed
Priority: optional
Section: java
Installed-Size: 93929
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openjdk-21
Version: 21.0.9+10-1~22.04
Replaces: openjdk-17-jre-headless (<< 17~10), openjdk-21-jre-headless (<< 21~27ea)
Provides: java-compiler, java-sdk-headless (= 21), java10-sdk-headless, java11-sdk-headless, java12-sdk-headless, java13-sdk-headless, java14-sdk-headless, java15-sdk-headless, java16-sdk-headless, java17-sdk-headless, java18-sdk-headless, java19-sdk-headless, java2-sdk-headless, java20-sdk-headless, java21-sdk-headless, java5-sdk-headless, java6-sdk-headless, java7-sdk-headless, java8-sdk-headless, java9-sdk-headless
Depends: openjdk-21-jre-headless (= 21.0.9+10-1~22.04), libc6 (>= 2.34), zlib1g (>= 1:1.1.4)
Suggests: openjdk-21-demo, openjdk-21-source
Breaks: openjdk-17-jre-headless (<< 17~10), openjdk-21-jre-headless (<< 21~27ea)
Description: OpenJDK Development Kit (JDK) (headless)
 OpenJDK is a development environment for building applications,
 applets, and components using the Java programming language.
Homepage: https://openjdk.java.net/
Original-Maintainer: OpenJDK Team <openjdk-21@packages.debian.org>

Package: openjdk-21-jre
Status: install ok installed
Priority: optional
Section: java
Installed-Size: 724
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openjdk-21
Version: 21.0.9+10-1~22.04
Replaces: openjdk-17-jre-headless (<< 17~10)
Provides: java-runtime (= 21), java10-runtime, java11-runtime, java12-runtime, java13-runtime, java14-runtime, java15-runtime, java16-runtime, java17-runtime, java18-runtime, java19-runtime, java2-runtime, java20-runtime, java21-runtime, java5-runtime, java6-runtime, java7-runtime, java8-runtime, java9-runtime
Depends: openjdk-21-jre-headless (= 21.0.9+10-1~22.04), libglib2.0-0, libgtk-3-0, libxrandr2, libxinerama1, libgl1, libharfbuzz0b (>= 1.2.6), libcups2, libfontconfig1, libc6 (>= 2.34), libfreetype6 (>= 2.3.5), libgcc-s1 (>= 3.0), libstdc++6 (>= 4.1.1), libasound2 (>= 1.0.16), libgif7 (>= 5.1), libjpeg8 (>= 8c), libpng16-16 (>= 1.6.2-1), libx11-6, libxext6, libxi6, libxrender1, libxtst6, zlib1g (>= 1:1.1.4)
Recommends: libatk-wrapper-java-jni (>= 0.30.4-0ubuntu2), fonts-dejavu-extra
Breaks: openjdk-17-jre-headless (<< 17~10)
Description: OpenJDK Java runtime, using Hotspot JIT
 Full Java runtime environment - needed for executing Java GUI and Webstart
 programs, using Hotspot JIT.
Homepage: https://openjdk.java.net/
Original-Maintainer: OpenJDK Team <openjdk-21@packages.debian.org>

Package: openjdk-21-jre-headless
Status: install ok installed
Priority: optional
Section: java
Installed-Size: 197990
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openjdk-21
Version: 21.0.9+10-1~22.04
Replaces: openjdk-11-jdk-headless (<< 11~18-2)
Provides: java-runtime-headless (= 21), java10-runtime-headless, java11-runtime-headless, java12-runtime-headless, java13-runtime-headless, java14-runtime-headless, java15-runtime-headless, java16-runtime-headless, java17-runtime-headless, java19-runtime-headless, java2-runtime-headless, java20-runtime-headless, java21-runtime-headless, java5-runtime-headless, java6-runtime-headless, java7-runtime-headless, java8-runtime-headless, java9-runtime-headless
Depends: ca-certificates-java (>= 20190405~), java-common (>= 0.28), liblcms2-2 (>= 2.8), libjpeg8 (>= 8c), libnss3 (>= 2:3.17.1), util-linux (>= 2.26.2-4), libc6 (>= 2.34), libgcc-s1 (>= 3.0), libpcsclite1 (>= 1.3.0), libstdc++6 (>= 5), zlib1g (>= 1:1.2.2)
Recommends: libcups2, libfontconfig1, libfreetype6 (>= 2.3.5), libharfbuzz0b (>= 1.2.6), libasound2 (>= 1.0.16)
Suggests: libnss-mdns, fonts-dejavu-extra, fonts-ipafont-gothic, fonts-ipafont-mincho, fonts-wqy-microhei | fonts-wqy-zenhei, fonts-indic
Breaks: clojure1.8 (<= 1.8.0-7ubuntu1~)
Conflicts: openjdk-11-jdk-headless (<< 11~18-2), oracle-java11-installer
Conffiles:
 /etc/java-21-openjdk/accessibility.properties cb5ef274bab0096317e5053916bd8bb8
 /etc/java-21-openjdk/jaxp.properties cc00e2819ca927d4130a5203706baba6
 /etc/java-21-openjdk/jfr/default.jfc 65b2b70b20d1b1aa1df9b3aa5d5b15de
 /etc/java-21-openjdk/jfr/profile.jfc 95f505afebccce7d509cf159b1e6e7d7
 /etc/java-21-openjdk/jvm-amd64.cfg 321e540aeca44cb27331afed9a4c0d02
 /etc/java-21-openjdk/logging.properties 0f00ec3e7a7767a4efeae1875fb5f3d4
 /etc/java-21-openjdk/management/jmxremote.access 5880f5255cf159b204761cf24be76061
 /etc/java-21-openjdk/management/management.properties 1e236f07e2b653fafe2c0ecd3eb815e1
 /etc/java-21-openjdk/net.properties 6796eefe85e78830093081ab9029fcca
 /etc/java-21-openjdk/psfont.properties.ja d4c735bf5756759a1c3bc8de408629fc
 /etc/java-21-openjdk/psfontj2d.properties 17b15d370018acc01550175882c7da91
 /etc/java-21-openjdk/security/blocked.certs 19e78890d61c0dfc65b291341c08beba
 /etc/java-21-openjdk/security/default.policy fc08e174675d35a72a7766a9512e4e7e
 /etc/java-21-openjdk/security/java.policy ec880e2973597e603e7e360fd192f973
 /etc/java-21-openjdk/security/java.security 36a7a15c1a8f99b8cf18c09d8371d9d6
 /etc/java-21-openjdk/security/nss.cfg ccd8ac9d15b87311cc9054767517c14d
 /etc/java-21-openjdk/security/policy/README.txt 3d47d94bc4f19d18bcc8b23f51d013af
 /etc/java-21-openjdk/security/policy/limited/default_US_export.policy 1a08ffdf0bc871296c8d698fb22f542a
 /etc/java-21-openjdk/security/policy/limited/default_local.policy 6d7b4616a5dba477b6b6d3f9a12e568f
 /etc/java-21-openjdk/security/policy/limited/exempt_local.policy 4cbb03f484c86cbea1a217baae07d3c9
 /etc/java-21-openjdk/security/policy/unlimited/default_US_export.policy 1a08ffdf0bc871296c8d698fb22f542a
 /etc/java-21-openjdk/security/policy/unlimited/default_local.policy 2a0f330c51aff13a96af8bd5082c84a8
 /etc/java-21-openjdk/security/public_suffix_list.dat d8e49334a95739fdd9508cdf770876c1
 /etc/java-21-openjdk/sound.properties 4f95242740bfb7b133b879597947a41e
 /etc/java-21-openjdk/swing.properties 235f7a79068085d8ef02e2b5134a294a
Description: OpenJDK Java runtime, using Hotspot JIT (headless)
 Minimal Java runtime - needed for executing non GUI Java programs,
 using Hotspot JIT.
Homepage: https://openjdk.java.net/
Original-Maintainer: OpenJDK Team <openjdk-21@packages.debian.org>

Package: openmpi-bin
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 554
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openmpi
Version: 4.1.2-2ubuntu1
Replaces: libopenmpi-dev (<< 4.0.5-3)
Depends: libc6 (>= 2.34), libevent-core-2.1-7 (>= 2.1.8-stable), libopenmpi3 (>= 4.1.2), openmpi-common (>= 4.1.2-2ubuntu1), openssh-client | ssh-client
Suggests: gfortran | fortran-compiler
Breaks: lam4-dev (<< 7.1.4-4), libmpich-dev (<< 3.3~b1-5), libopenmpi-dev (<< 4.0.5-3), mpich (<< 3.3~b1-5)
Conflicts: openmpi-bin
Conffiles:
 /etc/openmpi/openmpi-default-hostfile ef9b3fad0bd8bcb7bdbafe1881f068d3
 /etc/openmpi/openmpi-mca-params.conf 395f00e78e040cb6169f5b6f9a03d927
 /etc/openmpi/openmpi-totalview.tcl c04f4ef3c7ef59feb19ced2acf0a258b
Description: high performance message passing library -- binaries
 Open MPI is a project combining technologies and resources from several other
 projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in order to build the best
 MPI library available. A completely new MPI-3.1 compliant implementation, Open
 MPI offers advantages for system and software vendors, application developers
 and computer science researchers.
 .
 Features:
  * Full MPI-3.1 standards conformance
  * Thread safety and concurrency
  * Dynamic process spawning
  * High performance on all platforms
  * Reliable and fast job management
  * Network and process fault tolerance
  * Support network heterogeneity
  * Single library supports all networks
  * Run-time instrumentation
  * Many job schedulers supported
  * Internationalized error messages
  * Component-based design, documented APIs
 .
 This package contains the Open MPI utility programs.
Homepage: https://www.open-mpi.org/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: openmpi-common
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 458
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: openmpi
Version: 4.1.2-2ubuntu1
Conflicts: openmpi-common
Description: high performance message passing library -- common files
 Open MPI is a project combining technologies and resources from several other
 projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in order to build the best
 MPI library available. A completely new MPI-3.1 compliant implementation, Open
 MPI offers advantages for system and software vendors, application developers
 and computer science researchers.
 .
 This package contains platform independent files for Open MPI.
Homepage: https://www.open-mpi.org/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 3092
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:8.9p1-3ubuntu0.13
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libfido2-1 (>= 1.8.0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl3 (>= 3.0.2), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Breaks: openssh-sk-helper
Conflicts: sftp
Conffiles:
 /etc/ssh/ssh_config 8a5bddc82befb71d8ef34cc903d3d077
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1505
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:8.9p1-3ubuntu0.13
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:8.9p1-3ubuntu0.13), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3 (>= 3.0.2), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth, ssh-import-id
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/init.d/ssh 3649a6fe8c18ad1d5245fd91737de507
 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
 /etc/ssh/moduli e8fbe2dcefa45888cf7341d78d8258ce
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>

Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 101
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:8.9p1-3ubuntu0.13
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:8.9p1-3ubuntu0.13), libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>

Package: openssl
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 2053
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0.2-0ubuntu1.20
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.2-0ubuntu1.2)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf 6b4a72a4ce84bab35d884e536295e14f
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>

Package: os-prober
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 112
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.79ubuntu2
Depends: libc6 (>= 2.34), grub-common, mount
Description: utility to detect other OSes on a set of drives
 This package detects other OSes available on a system and outputs the
 results in a generic machine-readable format.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: packagekit
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1592
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.2.5-2ubuntu3
Depends: libglib2.0-bin, policykit-1, init-system-helpers (>= 1.52), libappstream4 (>= 0.10.0), libapt-pkg6.0 (>= 1.9.2), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libglib2.0-0 (>= 2.61.2), libgstreamer1.0-0 (>= 1.0.0), libpackagekit-glib2-18 (>= 1.2.4), libpolkit-gobject-1-0 (>= 0.99), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 11), libsystemd0 (>= 214)
Recommends: packagekit-tools, systemd
Suggests: appstream
Breaks: plymouth (<< 0.9.5)
Conffiles:
 /etc/PackageKit/PackageKit.conf 71da11578968301072133d233e91cd1e
 /etc/PackageKit/Vendor.conf ea3d03c3310b5470d0273659815c312d
 /etc/apt/apt.conf.d/20packagekit f9751c0229fd14ae8d7b69de0645f7b3
 /etc/dbus-1/system.d/org.freedesktop.PackageKit.conf fded44ee0c8edb7e65b9649570db3574
Description: Provides a package management service
 PackageKit allows performing simple software management tasks over a DBus
 interface e.g. refreshing the cache, updating, installing and removing
 software packages or searching for multimedia codecs and file handlers.
 .
 The work is done by backends which make use of the package manager shipped by
 the corresponding distribution. PackageKit is not meant to replace
 advanced tools like Synaptic.
 .
 The main benefits are:
  - unified interface on several distributions
  - fine grained privileges by using PolicyKit
  - independency from a running desktop session during the processing
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <mak@debian.org>

Package: packagekit-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: packagekit
Version: 1.2.5-2ubuntu3
Depends: packagekit (= 1.2.5-2ubuntu3), libc6 (>= 2.34), libglib2.0-0 (>= 2.54), libpackagekit-glib2-18 (>= 1.2.5)
Description: Provides PackageKit command-line tools
 PackageKit allows performing simple software management tasks over a DBus
 interface e.g. refreshing the cache, updating, installing and removing
 software packages or searching for multimedia codecs and file handlers.
 .
 This package provides the PackageKit command-line tools.
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <mak@debian.org>

Package: parted
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 167
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.4-2build1
Depends: libc6 (>= 2.34), libparted2 (= 3.4-2build1), libreadline8 (>= 6.0), libtinfo6 (>= 6)
Suggests: parted-doc
Description: disk partition manipulator
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the binary and manual page. Further
 documentation is available in parted-doc.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS, and PC98
 partitioning formats, as well as a "loop" (raw disk) type which
 allows use on RAID/LVM. It can detect and remove ASFS/AFFS/APFS,
 Btrfs, ext2/3/4, FAT16/32, HFS, JFS, linux-swap, UFS, XFS, and ZFS
 file systems. Parted also has the ability to create and modify file
 systems of some of these types, but using it to perform file system
 operations is now deprecated.
 .
 The nature of this software means that any bugs could cause massive
 data loss. While there are no such bugs known at the moment, they
 could exist, so please back up all important files before running
 it, and do so at your own risk.
Homepage: https://www.gnu.org/software/parted
Original-Maintainer: Parted Maintainer Team <parted-maintainers@alioth-lists.debian.net>

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2325
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.8.1-2ubuntu2.2
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsemanage2 (>= 2.0.3), libpam-modules
Recommends: sensible-utils
Conffiles:
 /etc/default/useradd 559e87e86a6d1cb4b7f60a6f691d5150
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: patch
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 229
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.7.6-7build2
Depends: libc6 (>= 2.34)
Suggests: ed, diffutils-doc
Description: Apply a diff file to an original
 Patch will take a patch file containing any of the four forms
 of difference listing produced by the diff program and apply
 those differences to an original file, producing a patched
 version.
Homepage: https://savannah.gnu.org/projects/patch/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: pci.ids
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1282
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.0~2022.01.22-1ubuntu0.1
Replaces: pciutils (<< 1:3.6.2-4~)
Breaks: pciutils (<< 1:3.6.2-4~)
Description: PCI ID Repository
 This package contains the pci.ids file, a public repository of all known
 ID's used in PCI devices: ID's of vendors, devices, subsystems and device
 classes. It is used in various programs to display full human-readable
 names instead of cryptic numeric codes.
Homepage: https://pci-ids.ucw.cz/
Original-Maintainer: Guillem Jover <guillem@debian.org>

Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:3.7.0-6
Depends: libc6 (>= 2.34), libkmod2 (>= 5~), libpci3 (= 1:3.7.0-6)
Suggests: bzip2, wget | curl | lynx-cur
Description: PCI utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: https://mj.ucw.cz/sw/pciutils/

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 718
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 5.34.0-3ubuntu1.5
Replaces: perl-base (<< 5.34.0-2), perl-modules (<< 5.22.0~)
Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 2.38), libattribute-handlers-perl (= 1.01), libautodie-perl (= 2.34), libcompress-raw-bzip2-perl (= 2.101), libcompress-raw-zlib-perl (= 2.101), libcompress-zlib-perl (= 2.102), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.140), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58), libdigest-perl (= 1.19), libdigest-sha-perl (= 6.02), libencode-perl (= 3.08), libexperimental-perl (= 0.024), libextutils-cbuilder-perl (= 0.280236), libextutils-command-perl (= 7.62), libextutils-install-perl (= 2.20), libextutils-parsexs-perl (= 3.430000), libfile-spec-perl (= 3.8000), libhttp-tiny-perl (= 0.076), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.102), libio-compress-bzip2-perl (= 2.102), libio-compress-perl (= 2.102), libio-compress-zlib-perl (= 2.102), libio-zlib-perl (= 1.11), libjson-pp-perl (= 4.06000), liblocale-maketext-perl (= 1.29), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 1.999818), libmath-complex-perl (= 1.5902), libmime-base64-perl (= 3.16), libmodule-corelist-perl (= 5.20210520), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000037), libnet-perl (= 1:3.13), libnet-ping-perl (= 2.74), libparams-check-perl (= 0.38), libparent-perl (= 0.238), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.42), libstorable-perl (= 3.23), libsys-syslog-perl (= 0.36), libtest-harness-perl (= 3.43), libtest-simple-perl (= 1.302183), libtest-tester-perl (= 1.302183), libtest-use-ok-perl (= 1.302183), libthread-queue-perl (= 3.14), libthreads-perl (= 2.26), libthreads-shared-perl (= 1.62), libtime-hires-perl (= 1.9767), libtime-local-perl (= 1.3000), libtime-piece-perl (= 1.3401), libunicode-collate-perl (= 1.29), libversion-perl (= 1:0.9928), libversion-requirements-perl, podlators-perl (= 4.14)
Depends: perl-base (= 5.34.0-3ubuntu1.5), perl-modules-5.34 (>= 5.34.0-3ubuntu1.5), libperl5.34 (= 5.34.0-3ubuntu1.5)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl
Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.34.0-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7739
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: perl
Version: 5.34.0-3ubuntu1.5
Replaces: libfile-path-perl (<< 2.18), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.41), libscalar-list-utils-perl (<< 1:1.55), libsocket-perl (<< 2.031), libxsloader-perl (<< 0.30), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl (= 2.18), libfile-temp-perl (= 0.2311), libio-socket-ip-perl (= 0.41), libscalar-list-utils-perl (= 1:1.55), libsocket-perl (= 2.031), libxsloader-perl (= 0.30), perlapi-5.34.0
Pre-Depends: libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), dpkg (>= 1.17.17)
Suggests: perl, sensible-utils
Breaks: amanda-common (<< 1:3.3.9-2), backuppc (<< 3.3.1-2), bucardo (<< 5.5.0-1.1), debconf (<< 1.5.61), dh-haskell (<< 0.3), intltool (<< 0.51.0-4), kio-perldoc (<< 20.04.1-1), latexml (<< 0.8.4-2), libdevel-mat-dumper-perl (<< 0.42-3), libencode-arabic-perl (<< 14.2-2), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.18), libfile-spec-perl (<< 3.8000), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.41), libmp3-tag-perl (<< 1.13-1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.55), libsocket-perl (<< 2.031), libxsloader-perl (<< 0.30), mailagent (<< 1:3.1-81-2), perl (<< 5.34.0~), perl-modules (<< 5.34.0~), pod2pdf (<< 0.42-5.1), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.34"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: perl-modules-5.34
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 17672
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.34.0-3ubuntu1.5
Replaces: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.38), libattribute-handlers-perl (<< 1.01), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.19), libexperimental-perl (<< 0.024), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.62), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.430000), libfile-spec-perl (<< 3.8000), libhttp-tiny-perl (<< 0.076), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.06000), liblocale-maketext-perl (<< 1.29), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999818), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20210520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.13), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.42), libtest-harness-perl (<< 3.43), libtest-simple-perl (<< 1.302183), libtest-tester-perl (<< 1.302183), libtest-use-ok-perl (<< 1.302183), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.29), libversion-perl (<< 1:0.9928), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 4.14)
Provides: perl-modules
Depends: perl-base (>= 5.34.0-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.34.0-1)
Breaks: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.38), libattribute-handlers-perl (<< 1.01), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.19), libexperimental-perl (<< 0.024), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.62), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.430000), libfile-spec-perl (<< 3.8000), libhttp-tiny-perl (<< 0.076), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.06000), liblocale-maketext-perl (<< 1.29), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999818), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20210520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.13), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.42), libtest-harness-perl (<< 3.43), libtest-simple-perl (<< 1.302183), libtest-tester-perl (<< 1.302183), libtest-use-ok-perl (<< 1.302183), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.29), libversion-perl (<< 1:0.9928), maildirsync (<< 1.2-2.1), perl (<< 5.34.0~), podlators-perl (<< 4.14)
Conflicts: perl-modules (<< 5.22.0~)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules-5.34' directly, they
 should use `perl' (which depends on `perl-modules-5.34') instead.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: php
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 14
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (100~+ubuntu22.04.1+deb.sury.org+1)
Version: 2:8.4+100~+ubuntu22.04.1+deb.sury.org+1
Depends: php8.4
Description: server-side, HTML-embedded scripting language (default)
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on latest stable
 PHP version (currently 8.4).

Package: php-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 75
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: php-defaults (100~+ubuntu22.04.1+deb.sury.org+1)
Version: 2:100~+ubuntu22.04.1+deb.sury.org+1
Depends: psmisc (>= 22.15-1~)
Recommends: cron | cron-daemon | anacron | systemd-sysv
Breaks: php-amqp (<< 2.1.2-5~), php-apcu (<< 5.1.24-1~), php-ast (<< 1.1.2-3~), php-ds (<< 1.5.0-5~), php-excimer (<< 1.2.3-1~), php-gearman (<< 2.1.2-4~), php-gmagick (<< 2.0.6~rc1++-5~), php-gnupg (<< 1.5.1-6~), php-igbinary (<< 3.2.16-4~), php-imagick (<< 3.7.0-12~), php-imap (<< 3:1.0.3-1), php-libvirt-php (<< 0.5.8-7~), php-mailparse (<< 3.1.8-1~), php-maxminddb (<< 1.12.0-1~), php-mcrypt (<< 3:1.0.7-5~), php-memcache (<< 8.2-5~), php-memcached (<< 3.3.0-3~), php-mongodb (<< 1.20.1-1~), php-msgpack (<< 1:3.0.0-1~), php-oauth (<< 2.0.9-1~), php-pcov (<< 1.0.11-9~), php-pecl-http (<< 4.2.6-3~), php-pq (<< 2.2.3-5~), php-ps (<< 1.4.4++-4~), php-pspell (<< 3:1.0.1-3~), php-psr (<< 1.2.0-9~), php-raphf (<< 2.0.1++-4~), php-redis (<< 6.1.0-3~), php-rrd (<< 2.0.3++-5~), php-smbclient (<< 1.1.2-3~), php-solr (<< 2.7.0-4~), php-ssh2 (<< 1.4.1-4~), php-stomp (<< 2.0.3-5~), php-uopz (<< 7.1.1++-4~), php-uploadprogress (<< 2.0.2++-4~), php-uuid (<< 1.2.1-2~), php-xdebug (<< 3.4.0-2~), php-xmlrpc (<< 3:1.0.0~rc3-10~), php-yac (<< 2.3.1++-4~), php-yaml (<< 2.2.4-1~), php-zmq (<< 1.1.3-30~), php-zstd (<< 0.14.0-1~)
Conffiles:
 /etc/cron.d/php e6fa2d74078ac0ac6fd730decf3b3736
Description: Common files for PHP packages
 This package contains common utilities shared among all packaged PHP
 versions.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.

Package: php-fpm
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 14
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (100~+ubuntu22.04.1+deb.sury.org+1)
Version: 2:8.4+100~+ubuntu22.04.1+deb.sury.org+1
Depends: php8.4-fpm
Description: server-side, HTML-embedded scripting language (FPM-CGI binary) (default)
 This package provides the Fast Process Manager interpreter that runs
 as a daemon and receives Fast/CGI requests.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on latest stable
 PHP version (currently 8.4).

Package: php-gd
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 14
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (100~+ubuntu22.04.1+deb.sury.org+1)
Version: 2:8.4+100~+ubuntu22.04.1+deb.sury.org+1
Depends: php-common, php8.4-gd
Description: GD module for PHP [default]
 This package provides a GD module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 14
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (100~+ubuntu22.04.1+deb.sury.org+1)
Version: 2:8.4+100~+ubuntu22.04.1+deb.sury.org+1
Depends: php-common, php8.4-mbstring
Description: MBSTRING module for PHP [default]
 This package provides a MBSTRING module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 14
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (100~+ubuntu22.04.1+deb.sury.org+1)
Version: 2:8.4+100~+ubuntu22.04.1+deb.sury.org+1
Depends: php-common, php8.4-mysql
Description: MySQL module for PHP [default]
 This package provides a MySQL module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php8.1-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 5501
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.1
Version: 8.1.34-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-cli, php-json, php8.1-json, phpapi-20210902
Depends: libedit2 (>= 2.11-20080614-4), media-types | mime-support, php8.1-common (= 8.1.34-1+ubuntu22.04.1+deb.sury.org+1), php8.1-opcache, php8.1-readline, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
 This package provides the /usr/bin/php8.1 command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcntl pcre Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.1-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 8457
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.1
Version: 8.1.34-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-calendar, php-ctype, php-exif, php-ffi, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php8.1-calendar, php8.1-ctype, php8.1-exif, php8.1-ffi, php8.1-fileinfo, php8.1-ftp, php8.1-gettext, php8.1-iconv, php8.1-pdo, php8.1-phar, php8.1-posix, php8.1-shmop, php8.1-sockets, php8.1-sysvmsg, php8.1-sysvsem, php8.1-sysvshm, php8.1-tokenizer
Depends: php-common (>= 1:81~), ucf, libc6 (>= 2.34), libffi8 (>= 3.4), libssl3 (>= 3.0.0~~alpha1)
Breaks: gforge-common (<< 6), php7.0-curl (<< 7.0.33-1~), php7.2-sodium (<< 7.2.12~)
Description: documentation, examples and common module for PHP
 This package provides the documentation, examples and common module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.1-fpm
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 5528
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.1
Version: 8.1.34-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-fpm, php-json, php8.1-json, phpapi-20210902
Depends: media-types | mime-support, php8.1-cli, php8.1-common (= 8.1.34-1+ubuntu22.04.1+deb.sury.org+1), php8.1-opcache, procps, systemd | systemd-tmpfiles, tzdata, ucf, libacl1 (>= 2.2.23), libapparmor1 (>= 2.7.0~beta1+bzr1772), libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libsystemd0, libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Conffiles:
 /etc/apache2/conf-available/php8.1-fpm.conf 88b33ab41c1385d2a4a8b5de25fd879f
 /etc/init.d/php8.1-fpm 40246d5e9590bae90b133167b9bfc118
 /etc/logrotate.d/php8.1-fpm 4bbd87237b3b0883169be0d7f856aad4
 /etc/php/8.1/fpm/php-fpm.conf 75494c14cd7739481ba87d225e031b49
 /etc/php/8.1/fpm/pool.d/www.conf e65a6de26bd321e3c99320562f59b914
Description: server-side, HTML-embedded scripting language (FPM-CGI binary)
 This package provides the Fast Process Manager interpreter that runs
 as a daemon and receives Fast/CGI requests.  Note that MOST Apache users
 probably want the libapache2-mod-php8.1 package.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.1-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1074
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.1
Version: 8.1.34-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-mbstring
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.34-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.14), libonig5 (>= 6.8.1)
Description: MBSTRING module for PHP
 This package provides the MBSTRING module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.1-opcache
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1033
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.1
Version: 8.1.34-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-opcache
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.34-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: Zend OpCache module for PHP
 This package provides the Zend OpCache module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.1-readline
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 68
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.1
Version: 8.1.34-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-readline
Depends: php-common (>= 1:81~), ucf, php8.1-common (= 8.1.34-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.34), libedit2 (>= 3.1-20160903-0)
Description: readline module for PHP
 This package provides the readline module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 85
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php
Depends: libapache2-mod-php8.2 | php8.2-fpm | php8.2-cgi, php8.2-common
Description: server-side, HTML-embedded scripting language (metapackage)
 This package is a metapackage that, when installed, guarantees that you
 have at least one of the four server-side versions of the PHP interpreter
 installed. Removing this package won't remove PHP from your system, however
 it may remove other packages that depend on this one.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 5617
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-cli, php-json, php8.2-json, phpapi-20220829
Depends: libedit2 (>= 2.11-20080614-4), media-types | mime-support, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), php8.2-opcache, php8.2-readline, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
 This package provides the /usr/bin/php8.2 command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcntl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 8500
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-calendar, php-ctype, php-exif, php-ffi, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php8.2-calendar, php8.2-ctype, php8.2-exif, php8.2-ffi, php8.2-fileinfo, php8.2-ftp, php8.2-gettext, php8.2-iconv, php8.2-pdo, php8.2-phar, php8.2-posix, php8.2-shmop, php8.2-sockets, php8.2-sysvmsg, php8.2-sysvsem, php8.2-sysvshm, php8.2-tokenizer
Depends: php-common (>= 1:81~), ucf, libc6 (>= 2.34), libffi8 (>= 3.4), libssl3 (>= 3.0.0~~alpha1)
Breaks: php8.2-apcu (<< 5.1.23-1~), php8.2-imagick (<< 3.7.0-5~), php8.2-oauth (<< 2.0.7++-1~)
Description: documentation, examples and common module for PHP
 This package provides the documentation, examples and common module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-curl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 152
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-curl
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.14), libcurl4 (>= 7.63.0)
Breaks: php7.0-curl (<< 7.0.33-1~)
Description: CURL module for PHP
 This package provides the CURL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-fpm
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 5649
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-fpm, php-json, php8.2-json, phpapi-20220829
Depends: media-types | mime-support, php8.2-cli, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), php8.2-opcache, procps, systemd | systemd-tmpfiles, tzdata, ucf, libacl1 (>= 2.2.23), libapparmor1 (>= 2.7.0~beta1+bzr1772), libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libsystemd0, libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Conffiles:
 /etc/apache2/conf-available/php8.2-fpm.conf 6e10de4fd642d6d8430f37fa89d7383a
 /etc/init.d/php8.2-fpm d395dbfb617756f530a543ddbd995f67
 /etc/logrotate.d/php8.2-fpm 5df6034d1e5bfb64cd4a964af70c7049
 /etc/php/8.2/fpm/php-fpm.conf 6007c38e8ea0aeeac894c6b3700ff3da
 /etc/php/8.2/fpm/pool.d/www.conf 255920f8afb451176981232efb14eb57
Description: server-side, HTML-embedded scripting language (FPM-CGI binary)
 This package provides the Fast Process Manager interpreter that runs
 as a daemon and receives Fast/CGI requests.  Note that MOST Apache users
 probably want the libapache2-mod-php8.2 package.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1198
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-mbstring
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.14), libonig5 (>= 6.8.1)
Description: MBSTRING module for PHP
 This package provides the MBSTRING module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 463
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-mysqli, php-mysqlnd, php-pdo-mysql, php8.2-mysqli, php8.2-mysqlnd, php8.2-pdo-mysql
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.15)
Description: MySQL module for PHP
 This package provides the MySQL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-opcache
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1025
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-opcache
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: Zend OpCache module for PHP
 This package provides the Zend OpCache module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-readline
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 68
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-readline
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.34), libedit2 (>= 3.1-20160903-0)
Description: readline module for PHP
 This package provides the readline module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 493
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Replaces: php8.2-xsl (<< 7.0.3-6~)
Provides: php-dom, php-simplexml, php-xml, php-xmlreader, php-xmlwriter, php-xsl, php8.2-dom, php8.2-simplexml, php8.2-xmlreader, php8.2-xmlwriter, php8.2-xsl
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.33), libxml2 (>= 2.9.0), libxslt1.1 (>= 1.1.25)
Breaks: php8.2-xsl (<< 7.0.3-6~)
Description: DOM, SimpleXML, XML, and XSL module for PHP
 This package provides the DOM, SimpleXML, XML, and XSL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-zip
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 124
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.30-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-zip
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.30-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.33), libzip4 (>= 1.7.0)
Description: Zip module for PHP
 This package provides the Zip module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.3-cli
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 5712
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.3
Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Config-Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-cli, php-json, php8.3-json, phpapi-20230831
Depends: libedit2 (>= 2.11-20080614-4), media-types | mime-support, php8.3-common (= 8.3.22-1+ubuntu22.04.1+deb.sury.org+1), php8.3-opcache, php8.3-readline, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
 This package provides the /usr/bin/php8.3 command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcntl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.3-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 9427
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.3
Version: 8.3.29-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-calendar, php-ctype, php-exif, php-ffi, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php8.3-calendar, php8.3-ctype, php8.3-exif, php8.3-ffi, php8.3-fileinfo, php8.3-ftp, php8.3-gettext, php8.3-iconv, php8.3-pdo, php8.3-phar, php8.3-posix, php8.3-shmop, php8.3-sockets, php8.3-sysvmsg, php8.3-sysvsem, php8.3-sysvshm, php8.3-tokenizer
Depends: php-common (>= 1:81~), ucf, libc6 (>= 2.34), libffi8 (>= 3.4), libssl3 (>= 3.0.0~~alpha1)
Breaks: gforge-common (<< 6), php7.0-curl (<< 7.0.33-1~), php7.2-sodium (<< 7.2.12~)
Description: documentation, examples and common module for PHP
 This package provides the documentation, examples and common module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.3-fpm
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 5738
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.3
Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Config-Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-fpm, php-json, php8.3-json, phpapi-20230831
Depends: media-types | mime-support, php8.3-cli, php8.3-common (= 8.3.22-1+ubuntu22.04.1+deb.sury.org+1), php8.3-opcache, procps, systemd | systemd-tmpfiles, tzdata, ucf, libacl1 (>= 2.2.23), libapparmor1 (>= 2.7.0~beta1+bzr1772), libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libsystemd0, libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Conffiles:
 /etc/apache2/conf-available/php8.3-fpm.conf c763554beba3b432ebf19c71e69ada46
 /etc/init.d/php8.3-fpm 41b98fe30a0cb49481818a0c297d9bcb
 /etc/logrotate.d/php8.3-fpm d2accdb1b12c3ac02239c433153fdb79
 /etc/php/8.3/fpm/php-fpm.conf 696fcb228ad0e29f57cdd2082eb41fac
 /etc/php/8.3/fpm/pool.d/www.conf 6204554fd51b0d45f12e2f2b5b62e377
Description: server-side, HTML-embedded scripting language (FPM-CGI binary)
 This package provides the Fast Process Manager interpreter that runs
 as a daemon and receives Fast/CGI requests.  Note that MOST Apache users
 probably want the libapache2-mod-php8.3 package.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.3-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1210
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.3
Version: 8.3.29-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-mbstring
Depends: php-common (>= 1:81~), ucf, php8.3-common (= 8.3.29-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.14), libonig5 (>= 6.8.1)
Description: MBSTRING module for PHP
 This package provides the MBSTRING module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.3-mysql
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 455
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.3
Version: 8.3.21-1+ubuntu22.04.1+deb.sury.org+1
Config-Version: 8.3.21-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-mysqli, php-mysqlnd, php-pdo-mysql, php8.3-mysqli, php8.3-mysqlnd, php8.3-pdo-mysql
Depends: php-common (>= 1:81~), ucf, php8.3-common (= 8.3.21-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.15)
Description: MySQL module for PHP
 This package provides the MySQL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.3-opcache
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 1028
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.3
Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Config-Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-opcache
Depends: php-common (>= 1:81~), ucf, php8.3-common (= 8.3.22-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: Zend OpCache module for PHP
 This package provides the Zend OpCache module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.3-readline
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 68
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.3
Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Config-Version: 8.3.22-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-readline
Depends: php-common (>= 1:81~), ucf, php8.3-common (= 8.3.22-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.34), libedit2 (>= 3.1-20160903-0)
Description: readline module for PHP
 This package provides the readline module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 79
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php
Depends: libapache2-mod-php8.4 | php8.4-fpm | php8.4-cgi, php8.4-common
Description: server-side, HTML-embedded scripting language (metapackage)
 This package is a metapackage that, when installed, guarantees that you
 have at least one of the four server-side versions of the PHP interpreter
 installed. Removing this package won't remove PHP from your system, however
 it may remove other packages that depend on this one.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-bcmath
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 100
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-bcmath
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.14)
Description: Bcmath module for PHP
 This package provides the Bcmath module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 5940
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-cli, php-json, php8.4-json, phpapi-20240924
Depends: libedit2 (>= 2.11-20080614-4), media-types | mime-support, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), php8.4-opcache, php8.4-readline, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libxml2 (>= 2.9.4), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
 This package provides the /usr/bin/php8.4 command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcntl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 9993
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-calendar, php-ctype, php-exif, php-ffi, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php8.4-calendar, php8.4-ctype, php8.4-exif, php8.4-ffi, php8.4-fileinfo, php8.4-ftp, php8.4-gettext, php8.4-iconv, php8.4-pdo, php8.4-phar, php8.4-posix, php8.4-shmop, php8.4-sockets, php8.4-sysvmsg, php8.4-sysvsem, php8.4-sysvshm, php8.4-tokenizer
Depends: php-common (>= 2:95~), ucf, libc6 (>= 2.34), libffi8 (>= 3.4), libssl3 (>= 3.0.0~~alpha1)
Breaks: gforge-common (<< 6), php7.0-curl (<< 7.0.33-1~), php7.2-sodium (<< 7.2.12~)
Description: documentation, examples and common module for PHP
 This package provides the documentation, examples and common module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-curl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 160
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-curl
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.14), libcurl4 (>= 7.63.0)
Breaks: php7.0-curl (<< 7.0.33-1~)
Description: CURL module for PHP
 This package provides the CURL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-fpm
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 5964
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-fpm, php-json, php8.4-json, phpapi-20240924
Depends: media-types | mime-support, php8.4-cli, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), php8.4-opcache, procps, systemd | systemd-tmpfiles, tzdata, ucf, libacl1 (>= 2.2.23), libapparmor1 (>= 2.7.0~beta1+bzr1772), libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.38), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0~~alpha1), libsystemd0, libxml2 (>= 2.9.4), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Conffiles:
 /etc/apache2/conf-available/php8.4-fpm.conf 8a94ee14f103f01d1f3785bcd900f73a
 /etc/init.d/php8.4-fpm c2165066d4c404b912c3bb507f116daa
 /etc/logrotate.d/php8.4-fpm 826e030dab902c74efe52b7d96d339c4
 /etc/php/8.4/fpm/php-fpm.conf d2c8ebdf790f2cba12d04ff98958e4ed
 /etc/php/8.4/fpm/pool.d/www.conf 826727a2d9844af7a1b3499b8c89baa1
Description: server-side, HTML-embedded scripting language (FPM-CGI binary)
 This package provides the Fast Process Manager interpreter that runs
 as a daemon and receives Fast/CGI requests.  Note that MOST Apache users
 probably want the libapache2-mod-php8.4 package.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-gd
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 180
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-gd
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.4), libgd3 (>= 2.3.3)
Description: GD module for PHP
 This package provides the GD module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-imap
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 139
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-imap
Version: 3:1.0.3-2+ubuntu22.04.1+deb.sury.org+1
Replaces: php-imap (<< 3:1.0.3~)
Provides: php-imap
Depends: php8.4-common, phpapi-20240924, libc-client2007e, libc6 (>= 2.14)
Pre-Depends: php-common (>= 2:69~)
Breaks: php-imap (<< 3:1.0.3~)
Conffiles:
 /etc/php/8.4/mods-available/imap.ini f0c6fd9301f976342df18bf5f964200f
Description: This package provides the IMAP module(s) for PHP
 A PHP extension to operate with the IMAP protocol, as well as the NNTP, POP3,
 and local mailbox access methods.
 .
 The extension is unbundled from php-src as of PHP 8.4.0.
Homepage: https://pecl.php.net/package/imap

Package: php8.4-intl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 684
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-intl
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libicu70 (>= 70.1-1~), libstdc++6 (>= 4.3)
Description: Internationalisation module for PHP
 This package provides the Internationalisation module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1230
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-mbstring
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.14), libonig5 (>= 6.8.1)
Description: MBSTRING module for PHP
 This package provides the MBSTRING module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 455
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-mysqli, php-mysqlnd, php-pdo-mysql, php8.4-mysqli, php8.4-mysqlnd, php8.4-pdo-mysql
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.15), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.1.4)
Description: MySQL module for PHP
 This package provides the MySQL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-opcache
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1202
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-opcache
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: Zend OpCache module for PHP
 This package provides the Zend OpCache module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-readline
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 68
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-readline
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.34), libedit2 (>= 3.1-20160903-0)
Description: readline module for PHP
 This package provides the readline module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 2396
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Replaces: php8.4-xsl (<< 7.0.3-6~)
Provides: php-dom, php-simplexml, php-xml, php-xmlreader, php-xmlwriter, php-xsl, php8.4-dom, php8.4-simplexml, php8.4-xmlreader, php8.4-xmlwriter, php8.4-xsl
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.33), libxml2 (>= 2.9.4), libxslt1.1 (>= 1.1.27)
Breaks: php8.4-xsl (<< 7.0.3-6~)
Description: DOM, SimpleXML, XML, and XSL module for PHP
 This package provides the DOM, SimpleXML, XML, and XSL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-zip
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 136
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.16-1+ubuntu22.04.1+deb.sury.org+1
Provides: php-zip
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.16-1+ubuntu22.04.1+deb.sury.org+1), libc6 (>= 2.33), libzip4 (>= 1.7.0)
Description: Zip module for PHP
 This package provides the Zip module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: pigz
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 158
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.6-1
Depends: libc6 (>= 2.33), zlib1g (>= 1:1.2.6)
Pre-Depends: dpkg (>= 1.15.6)
Description: Parallel Implementation of GZip
 pigz, which stands for Parallel Implementation of GZip, is a fully functional
 replacement for gzip that takes advantage of multiple processors and multiple
 cores when compressing data.
Original-Maintainer: Eduard Bloch <blade@debian.org>
Homepage: http://zlib.net/pigz/

Package: pinentry-curses
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: pinentry
Version: 1.1.1-1build2
Provides: pinentry
Depends: libassuan0 (>= 2.1.0), libc6 (>= 2.34), libgpg-error0 (>= 1.16), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: pinentry-doc
Enhances: gnupg-agent
Description: curses-based PIN or pass-phrase entry dialog for GnuPG
 This package contains a program that allows for secure entry of PINs or
 pass phrases.  That means it tries to take care that the entered
 information is not swapped to disk or temporarily stored anywhere.
 This functionality is particularly useful for entering pass phrases
 when using encryption software such as GnuPG or e-mail clients using
 the same.  It uses an open protocol and is therefore not tied to
 particular software.
 .
 The program contained in this package implements a PIN entry dialog
 using the curses tool kit, meaning that it is useful for users
 working in text mode without the X Window System.  There are sibling
 packages that implement PIN entry dialogs that use an X tool kit.  If
 you install any of the graphical packages then this package is not
 necessary because the sibling packages automatically fall back to
 text mode if X is not active.
Homepage: https://www.gnupg.org/related_software/pinentry/
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: pipewire
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 28
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 0.3.48-1ubuntu3
Depends: libpipewire-0.3-modules (= 0.3.48-1ubuntu3), pipewire-bin (= 0.3.48-1ubuntu3), init-system-helpers (>= 1.52)
Description: audio and video processing engine multimedia server
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This metapackage makes PipeWire available for programs of the same
 architecture, and provides the systemd user service necessary to run
 pipewire on-demand.
Homepage: https://pipewire.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@alioth-lists.debian.net>

Package: pipewire-bin
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 1420
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: pipewire
Version: 0.3.48-1ubuntu3
Replaces: pipewire (<< 0.3.5)
Depends: libpipewire-0.3-modules (= 0.3.48-1ubuntu3), libasound2 (>= 1.2.1.1), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libncursesw6 (>= 6), libpipewire-0.3-0 (= 0.3.48-1ubuntu3), libreadline8 (>= 6.0), libsndfile1 (>= 1.0.20), libtinfo6 (>= 6)
Recommends: dbus-user-session, pipewire-media-session | wireplumber, rtkit
Breaks: pipewire (<< 0.3.5)
Description: PipeWire multimedia server - programs
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package contains the server and command-line utilities, and should
 not normally be depended on directly. PipeWire clients should depend on
 the pipewire package instead.
Homepage: https://pipewire.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@alioth-lists.debian.net>

Package: pipewire-media-session
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 508
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.4.1-2ubuntu1
Replaces: pipewire-bin (<< 0.3.27-2), pipewire-pulse (<< 0.3.39-1)
Depends: pipewire (>= 0.3.39), init-system-helpers (>= 1.52), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libpipewire-0.3-0 (>= 0.3.39), libsystemd0
Breaks: pipewire-bin (<< 0.3.27-2), pipewire-pulse (<< 0.3.39-1)
Conflicts: wireplumber
Description: example session manager for PipeWire
 PipeWire Media Session is an example session manager for PipeWire.
 .
 Note that it is recommended the use of WirePlumber instead.
Homepage: https://gitlab.freedesktop.org/pipewire/media-session/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@alioth-lists.debian.net>

Package: pkexec
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 65
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: policykit-1
Version: 0.105-33
Replaces: policykit-1 (<< 0.105-32~)
Depends: polkitd (= 0.105-33), libc6 (>= 2.34), libglib2.0-0 (>= 2.35.9), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 0.105-33), libpolkit-gobject-1-0 (= 0.105-33)
Breaks: policykit-1 (<< 0.105-32~)
Description: run commands as another user with polkit authorization
 polkit is an application-level toolkit for defining and handling the policy
 that allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 pkexec is a setuid program to allow certain users to run commands as
 root or as a different user, similar to sudo. Unlike sudo, it carries
 out authentication and authorization by sending a request to polkit,
 so it uses desktop environments' familiar prompting mechanisms for
 authentication and uses polkit policies for authorization decisions.
 .
 By default, members of the 'sudo' Unix group can use pkexec to run any
 command after authenticating. The authorization rules can be changed by
 the local system administrator.
 .
 If this functionality is not required, removing the pkexec package will
 reduce security risk by removing a setuid program.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/

Package: pkg-config
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.29.2-1ubuntu3
Replaces: pkg-config-bin
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.16.0), libdpkg-perl
Suggests: dpkg-dev
Conflicts: pkg-config-bin
Conffiles:
 /etc/dpkg/dpkg.cfg.d/pkg-config-hook-config 467c877de00898418a9b26d432a1719a
Description: manage compile and link flags for libraries
 pkg-config is a system for managing library compile and link flags that
 works with automake and autoconf.
 .
 Increasingly libraries ship with ".pc" files that allow querying of the
 compiler and linker flags needed to use them through the pkg-config(1)
 program.
Homepage: http://pkg-config.freedesktop.org
Original-Maintainer: Tollef Fog Heen <tfheen@debian.org>

Package: plymouth
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 924
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.9.5+git20211018-1ubuntu3
Replaces: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Depends: init-system-helpers (>= 1.18), lsb-base (>= 3.0-6), systemd (>= 232-8~), udev (>= 232-8~), libc6 (>= 2.34), libdrm2 (>= 2.4.47), libplymouth5 (>= 0.9.5+git20211018-1ubuntu3)
Recommends: plymouth-theme-ubuntu-text | plymouth-theme
Suggests: desktop-base, plymouth-themes
Breaks: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Conflicts: console-common
Conffiles:
 /etc/init.d/plymouth 707674e3b5b8fa048271dfe2490a0a09
 /etc/init.d/plymouth-log 83b6676117e0e9b3f952e0fc625892ac
 /etc/logrotate.d/bootlog 0f1e42d11052c238718996029ffb809b
Description: boot animation, logger and I/O multiplexer
 Plymouth provides a boot-time I/O multiplexing framework - the most obvious
 use for which is to provide an attractive graphical animation in place of
 the text messages that normally get shown during boot. (The messages are
 instead redirected to a logfile for later viewing.) However, in event-driven
 boot systems Plymouth can also usefully handle user interaction such as
 password prompts for encrypted file systems.
 .
 This package provides the basic framework, enabling a text-mode animation.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: plymouth-theme-ubuntu-text
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: plymouth
Version: 0.9.5+git20211018-1ubuntu3
Provides: plymouth-theme
Depends: libc6 (>= 2.17), libplymouth5 (>= 0.9.2), plymouth (= 0.9.5+git20211018-1ubuntu3), lsb-release
Description: boot animation, logger and I/O multiplexer - ubuntu text theme
 Plymouth provides a boot-time I/O multiplexing framework - the most obvious
 use for which is to provide an attractive graphical animation in place of
 the text messages that normally get shown during boot. (The messages are
 instead redirected to a logfile for later viewing.) However, in event-driven
 boot systems Plymouth can also usefully handle user interaction such as
 password prompts for encrypted file systems.
 .
 This package contains the default ubuntu-text text theme used when no
 support for a graphical theme is found on your system.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: policykit-1
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 29
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.105-33
Depends: pkexec (= 0.105-33), polkitd (= 0.105-33)
Description: transitional package for polkitd and pkexec
 polkit is an application-level toolkit for defining and handling the policy
 that allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 This transitional package depends on polkitd, the system service used by
 polkit, and pkexec, a setuid program analogous to sudo. They were
 historically packaged together, but have been separated so that users of
 polkitd are not required to install pkexec.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/

Package: polkitd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 520
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: policykit-1
Version: 0.105-33
Replaces: policykit-1 (<< 0.105-32~)
Provides: polkitd-pkla (= 0.105-33)
Depends: dbus, default-logind | logind, libc6 (>= 2.34), libexpat1 (>= 2.0.1), libglib2.0-0 (>= 2.37.3), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 0.105-33), libpolkit-gobject-1-0 (= 0.105-33), libsystemd0 (>= 213)
Breaks: policykit-1 (<< 0.105-32~)
Conffiles:
 /etc/pam.d/polkit-1 7c794427f656539b0d4659b030904fe0
 /etc/polkit-1/localauthority.conf.d/50-localauthority.conf 2adb9d174807b0a3521fabf03792fbc8
 /etc/polkit-1/localauthority.conf.d/51-ubuntu-admin.conf c4dbd2117c52f367f1e8b8c229686b10
Description: framework for managing administrative policies and privileges
 PolicyKit is an application-level toolkit for defining and handling the policy
 that allows unprivileged processes to speak to privileged processes.
 .
 It is a framework for centralizing the decision making process with respect to
 granting access to privileged operations for unprivileged (desktop)
 applications.
 .
 In a typical use of polkit, an unprivileged application such as gnome-disks
 sends requests via D-Bus or other inter-process communication mechanisms
 to a privileged system service such as udisks, which asks polkitd for
 permission to process those requests. This allows the application to carry
 out privileged tasks without making use of setuid, which avoids several
 common sources of security vulnerabilities.
 .
 This package provides the polkitd D-Bus service and supporting programs.
 The pkexec program is not included, and can be found in the pkexec package.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/polkit/

Package: poppler-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 13089
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.4.11-1
Replaces: cmap-adobe-cns1 (<= 0+20090930-2), cmap-adobe-gb1 (<= 0+20090930-2), cmap-adobe-japan1 (<= 0+20090930-2), cmap-adobe-japan2 (<= 0+20090930-2), cmap-adobe-korea1 (<= 1.20100103-3), gs-cjk-resource (<= 1.20100103-3)
Provides: cmap-adobe-cns1, cmap-adobe-gb1, cmap-adobe-japan1, cmap-adobe-japan2, cmap-adobe-korea1, gs-cjk-resource
Pre-Depends: dpkg (>= 1.15.6~)
Suggests: poppler-utils, ghostscript, fonts-japanese-mincho | fonts-ipafont-mincho, fonts-japanese-gothic | fonts-ipafont-gothic, fonts-arphic-ukai, fonts-arphic-uming, fonts-nanum (>= 20131007~)
Breaks: cmap-adobe-cns1 (<= 0+20090930-2), cmap-adobe-gb1 (<= 0+20090930-2), cmap-adobe-japan1 (<= 0+20090930-2), cmap-adobe-japan2 (<= 0+20090930-2), cmap-adobe-korea1 (<= 1.20100103-3), gs-aladdin (<= 6.50-5), gs-cjk-resource (<= 1.20100103-3)
Enhances: ghostscript
Conffiles:
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-cns1.conf d3a491137506a332ab747c571e5bee33
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-gb1.conf 5ec7d7edc178ef73b1f6ac21a3cdc8a0
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan1.conf 9502944d3a420a2763a36517679460f4
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan2.conf 00d6b53125e159d61e2fd0a5056b4b4c
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-korea1.conf 76ba5a8a08376075902594b9ecd902ed
Description: encoding data for the poppler PDF rendering library
 This package provides the CMap tables required to display PDF documents
 containing CJK characters with libpoppler. They were previously provided
 by the packages cmap-adobe-{cns1,gb1,japan1,japan2,korea1} and
 gs-cjk-resource.
 .
 Users who want to view or create PDF files in Chinese, Japanese, or
 Korean without embedded fonts will need this package.
Original-Maintainer: Hideki Yamane <henrich@debian.org>
Homepage: https://poppler.freedesktop.org/

Package: popularity-contest
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 191
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.71ubuntu3
Provides: popcon
Depends: debconf (>= 0.5) | debconf-2.0, dpkg (>= 1.10)
Pre-Depends: debconf (>= 1.5.34) | cdebconf (>= 0.106)
Recommends: gpg, cron | cron-daemon
Suggests: anacron, tor, torsocks
Conffiles:
 /etc/cron.daily/popularity-contest bd6d91ce4e36bfb08beb2f85dcf8a65a
Description: Vote for your favourite packages automatically
 Ubuntu no longer collects popularity-contest statistics. This
 package is being kept for compatibility reasons.
 .
 The popularity-contest package sets up a cron job that will
 periodically anonymously submit to the Debian developers
 statistics about the most used Debian packages on this system.
 .
 This information helps Debian make decisions such as which packages
 should go on the first CD. It also lets Debian improve future versions
 of the distribution so that the most popular packages are the ones which
 are installed automatically for new users.
Homepage: https://popcon.debian.org/
Original-Maintainer: Popularity Contest Developers <debian-popcon@lists.debian.org>

Package: postfix
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 4084
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.6.4-1ubuntu1.3
Replaces: mail-transport-agent
Provides: default-mta, mail-transport-agent
Depends: libc6 (>= 2.34), libdb5.3, libicu70 (>= 70.1-1~), libnsl2 (>= 1.0), libsasl2-2 (>= 2.1.27+dfsg2), libssl3 (>= 3.0.0~~alpha1), debconf (>= 0.5) | debconf-2.0, netbase, adduser (>= 3.48), dpkg (>= 1.8.3), lsb-base (>= 3.0-6), ssl-cert, cpio, e2fsprogs
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: python3, ca-certificates
Suggests: procmail, postfix-mysql, postfix-pgsql, postfix-ldap, postfix-pcre, postfix-lmdb, postfix-sqlite, sasl2-bin | dovecot-common, libsasl2-modules | dovecot-common, resolvconf, postfix-cdb, mail-reader, postfix-mta-sts-resolver, ufw, postfix-doc
Conflicts: mail-transport-agent, smail
Conffiles:
 /etc/init.d/postfix 394590f409167c291ab25309361d48eb
 /etc/insserv.conf.d/postfix 7fe2d086ff4822fc9fe13adab1090dce
 /etc/network/if-down.d/postfix 476028824e6fefb251ded3df27a420b3
 /etc/network/if-up.d/postfix b13787e06b1451656034a14f0e16ce2c
 /etc/postfix/post-install 64594bceb8f4a504f35ce5704ce7c1e6
 /etc/postfix/postfix-files 2d1068960ddf2cc82a6fbe26dec98e6f
 /etc/postfix/postfix-script 7d9116d6267632d74f642d70ac4b1ef1
 /etc/ppp/ip-down.d/postfix 476028824e6fefb251ded3df27a420b3
 /etc/ppp/ip-up.d/postfix b13787e06b1451656034a14f0e16ce2c
 /etc/resolvconf/update-libc.d/postfix 60d8805fabdbb6a44f10f9af380985ad
 /etc/rsyslog.d/postfix.conf d8a09827fff2a22311e4dd4a83e95c83
 /etc/ufw/applications.d/postfix 5c7e746dc9255e750b8f50460de11a32
Description: High-performance mail transport agent
 Postfix is Wietse Venema's mail transport agent that started life as an
 alternative to the widely-used Sendmail program.  Postfix attempts to
 be fast, easy to administer, and secure, while at the same time being
 sendmail compatible enough to not upset existing users. Thus, the outside
 has a sendmail-ish flavor, but the inside is completely different.
Homepage: http://www.postfix.org
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: postgresql
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 70
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: postgresql-common (238)
Version: 14+238
Depends: postgresql-14
Suggests: postgresql-doc
Description: object-relational SQL database (supported version)
 This metapackage always depends on the currently supported PostgreSQL
 database server version.
 .
 PostgreSQL is a fully featured object-relational database management
 system.  It supports a large part of the SQL standard and is designed
 to be extensible by users in many aspects.  Some of the features are:
 ACID transactions, foreign keys, views, sequences, subqueries,
 triggers, user-defined types and functions, outer joins, multiversion
 concurrency control.  Graphical user interfaces and bindings for many
 programming languages are available as well.
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>

Package: postgresql-14
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 43460
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 14.20-0ubuntu0.22.04.1
Provides: postgresql-14-jit-llvm (= 14), postgresql-contrib-14
Depends: locales | locales-all, postgresql-client-14, postgresql-common (>= 229~), ssl-cert, tzdata, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libgssapi-krb5-2 (>= 1.14+dfsg), libicu70 (>= 70.1-1~), libldap-2.5-0 (>= 2.5.4), libllvm14, liblz4-1 (>= 0.0~r130), libpam0g (>= 0.99.7.1), libpq5 (>= 14~~), libselinux1 (>= 3.1~), libssl3 (>= 3.0.0~~alpha1), libstdc++6 (>= 11), libsystemd0, libuuid1 (>= 2.16), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.1.4)
Recommends: sysstat
Description: The World's Most Advanced Open Source Relational Database
 PostgreSQL, also known as Postgres, is a free and open-source relational
 database management system (RDBMS) emphasizing extensibility and SQL
 compliance. It features transactions with Atomicity, Consistency, Isolation,
 Durability (ACID) properties, automatically updatable views, materialized
 views, triggers, foreign keys, and stored procedures. It is designed to handle
 a range of workloads, from single machines to data warehouses or Web services
 with many concurrent users.
 .
 This package provides the database server for PostgreSQL 14.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Postgresql-Catversion: 202107181

Package: postgresql-client-14
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 4084
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: postgresql-14
Version: 14.20-0ubuntu0.22.04.1
Provides: postgresql-client
Depends: libpq5 (>= 14.20), postgresql-client-common (>= 182~), sensible-utils, libc6 (>= 2.34), libreadline8 (>= 6.0), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.1.4)
Suggests: postgresql-14, postgresql-doc-14
Description: front-end programs for PostgreSQL 14
 This package contains client and administrative programs for
 PostgreSQL: these are the interactive terminal client psql and
 programs for creating and removing users and databases.
 .
 This is the client package for PostgreSQL 14. If you install
 PostgreSQL 14 on a standalone machine, you need the server package
 postgresql-14, too. On a network, you can install this package on
 many client machines, while the server package may be installed on
 only one machine.
 .
 PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>

Package: postgresql-client-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 189
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: postgresql-common
Version: 238
Depends: netbase, perl:any
Conffiles:
 /etc/postgresql-common/supported_versions 71e93cbf6b710f422a5c54e9a63282a5
 /etc/postgresql-common/user_clusters d2959e6ae6847342be07146ce06af33b
Description: manager for multiple PostgreSQL client versions
 The postgresql-client-common package provides a structure under which
 multiple versions of PostgreSQL client programs may be installed at
 the same time. It provides a wrapper which selects the right version
 for the particular cluster you want to access (with a command line
 option, an environment variable, /etc/postgresql-common/user_clusters,
 or ~/.postgresqlrc).
 .
 PostgreSQL is a fully featured object-relational database management
 system. It supports a large part of the SQL standard and is designed
 to be extensible by users in many aspects. Its features include ACID
 transactions, foreign keys, views, sequences, subqueries, triggers,
 outer joins, multiversion concurrency control, and user-defined types
 and functions.
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>

Package: postgresql-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 691
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 238
Replaces: postgresql-server-dev-all (<< 204)
Depends: adduser, debconf (>= 0.5.00) | debconf-2.0, libjson-perl, lsb-base (>= 3.0-3), postgresql-client-common (= 238), ssl-cert (>= 1.0.11), ucf, perl:any
Recommends: e2fsprogs, logrotate
Breaks: postgresql-9.1 (<< 9.1.1-3~), postgresql-server-dev-all (<< 204)
Conffiles:
 /etc/init.d/postgresql 1b9da643d7a403248d70e1776fb98458
 /etc/logrotate.d/postgresql-common 101326ef5d138998692ece35109ef1a2
Description: PostgreSQL database-cluster manager
 The postgresql-common package provides a structure under which
 multiple versions of PostgreSQL may be installed and/or multiple
 clusters maintained at one time.
 .
 The commands provided are pg_conftool, pg_createcluster, pg_ctlcluster,
 pg_dropcluster, pg_lsclusters, pg_renamecluster, pg_upgradecluster,
 pg_virtualenv.
 .
 PostgreSQL is a fully featured object-relational database management
 system. It supports a large part of the SQL standard and is designed
 to be extensible by users in many aspects. Its features include ACID
 transactions, foreign keys, views, sequences, subqueries, triggers,
 outer joins, multiversion concurrency control, and user-defined types
 and functions.
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>

Package: postgresql-contrib
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 70
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: postgresql-common (238)
Version: 14+238
Depends: postgresql-contrib-14
Description: additional facilities for PostgreSQL (supported version)
 This metapackage always depends on the currently supported PostgreSQL
 database contrib package.
 .
 PostgreSQL is a fully featured object-relational database management
 system.  It supports a large part of the SQL standard and is designed
 to be extensible by users in many aspects.  Some of the features are:
 ACID transactions, foreign keys, views, sequences, subqueries,
 triggers, user-defined types and functions, outer joins, multiversion
 concurrency control.  Graphical user interfaces and bindings for many
 programming languages are available as well.
Original-Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>

Package: powermgmt-base
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.36ubuntu0.22.04.1
Description: common utils for power management
 This package ships "on_ac_power" which lets you determine whether
 the system is powered from battery or an abundant supply.  It's
 recommended to use this tool over a simple sysfs check,
 ConditionACPower or other ad-hoc methods which notoriously fail to
 account for unobvious quirks, both old and new.
Original-Maintainer: Adam Borowski <kilobyte@angband.pl>

Package: procps
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1388
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.17-6ubuntu2.1
Replaces: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2)
Provides: watch
Depends: libc6 (>= 2.34), libncurses6 (>= 6), libncursesw6 (>= 6), libprocps8 (>= 2:3.3.16-1), libtinfo6 (>= 6), lsb-base (>= 3.0-10), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2), open-vm-tools (<= 2011.12.20-562307-1)
Conffiles:
 /etc/init.d/procps f9903aa0d9f2f10714269befb4cdba8f
 /etc/sysctl.conf c0c09cba30da0565737cace8000d64ee
 /etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
 /etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
 /etc/sysctl.d/10-kernel-hardening.conf f85fded186d1ad70c5f69ca6a88e4de6
 /etc/sysctl.d/10-magic-sysrq.conf b3059f2835f17c97265433fdfdee358f
 /etc/sysctl.d/10-network-security.conf e2c60d912410543907a6c9ff21836ba8
 /etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
 /etc/sysctl.d/10-zeropage.conf 8d7193abcc4dfedaf519dd03016a5e59
 /etc/sysctl.d/README.sysctl 48e64ce233c8aba8e0693adf8cf4c464
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <csmall@debian.org>

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 452
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 23.4-2build3
Replaces: manpages-de (<< 4.9.1-1)
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Breaks: manpages-de (<< 4.9.1-1)
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: psutils
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 219
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.17.dfsg-4
Depends: libc6 (>= 2.7), libpaper1
Recommends: ghostscript
Description: PostScript document handling utilities
 This collection of utilities is for manipulating PostScript
 documents.  Page selection and rearrangement are supported, including
 arrangement into signatures for booklet printing, and page merging
 for n-up printing.
 .
 The following programs are included in psutils: epsffit, extractres,
 fixdlsrps, fixfmps, fixmacps, fixpsditps, fixpspps, fixscribeps,
 fixtpps, fixwfwps, fixwpps, fixwwps, getafm, includeres, psbook,
 psmerge, psnup, psresize, psselect, pstops, showchar
 .
 Some programs included here (psmerge) behave differently if gs is
 available, but all programs work without it.
Original-Maintainer: Ian Jackson <ijackson@chiark.greenend.org.uk>
Homepage: https://github.com/rrthomas/psutils

Package: publicsuffix
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 330
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20211207.1025-1
Provides: publicsuffix-dafsa
Description: accurate, machine-readable list of domain name suffixes
 A machine-readable list of domain name suffixes that accept public
 registration.  Each suffix represents the part of a domain name which
 is not under the control of the individual registrant, which makes
 the list useful for grouping cookies, deciding same-origin policies,
 collating spam, and other activities.
Original-Maintainer: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Homepage: https://publicsuffix.org

Package: pv
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.6.6-1build2
Depends: libc6 (>= 2.34)
Suggests: doc-base
Description: Shell pipeline element to meter data passing through
 pv (Pipe Viewer) can be inserted into any normal pipeline between two
 processes to give a visual indication of how quickly data is passing through,
 how long it has taken, how near to completion it is, and an estimate of how
 long it will be until completion.
 .
 To use it, insert it in a pipeline between two processes, with the
 appropriate options. Its standard input will be passed through to its
 standard output and progress will be shown on standard error.
Homepage: https://www.ivarch.com/programs/pv.shtml
Original-Maintainer: Antoine Beaupré <anarcat@debian.org>

Package: python-apt-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 188
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-apt
Version: 2.4.0ubuntu4.1
Replaces: python-apt (<< 0.7.98+nmu1)
Breaks: python-apt (<< 0.7.98+nmu1)
Enhances: python-apt, python3-apt
Description: Python interface to libapt-pkg (locales)
 The apt_pkg Python interface will provide full access to the internal
 libapt-pkg structures allowing Python programs to easily perform a
 variety of functions.
 .
 This package contains locales.
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: python3
Status: install ok installed
Priority: important
Section: python
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.10.6-1~22.04.1
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler
Depends: python3.10 (>= 3.10.6-1~), libpython3-stdlib (= 3.10.6-1~22.04.1)
Pre-Depends: python3-minimal (= 3.10.6-1~22.04.1)
Suggests: python3-doc (>= 3.10.6-1~22.04.1), python3-tk (>= 3.10.6-1~), python3-venv (>= 3.10.6-1~22.04.1)
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.10).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://www.python.org/

Package: python3-acme
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 168
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-acme
Version: 1.21.0-1ubuntu0.1
Provides: python3-acme-abi-1 (= 1.21)
Depends: ca-certificates, python3-openssl (>= 17.3.0), python3-cryptography (>= 2.1.4), python3-josepy (>= 1.9.0), python3-pkg-resources, python3-requests, python3-requests-toolbelt, python3-rfc3339, python3-tz, python3:any
Suggests: python-acme-doc
Description: ACME protocol library for Python 3
 This is a library used by the Let's Encrypt client for the ACME
 (Automated Certificate Management Environment).  The ACME protocol is
 designed as part of the Let's Encrypt project, to make it possible to
 setup an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention.  This
 library implements the protocol used for proving the control of a
 domain.  This library is Python 3.
Homepage: https://letsencrypt.org/
Original-Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>

Package: python3-apt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 705
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python-apt
Version: 2.4.0ubuntu4.1
Replaces: python-apt (<< 0.7.98+nmu1)
Provides: python3.10-apt
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libapt-pkg6.0 (>= 1.9.11~), libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11), python-apt-common, distro-info-data
Recommends: lsb-release, iso-codes
Suggests: python3-apt-dbg, python-apt-doc, apt
Breaks: apt-xapian-index (<< 0.51~), kthresher (<= 1.4.0-1), python-apt (<< 0.7.98+nmu1)
Description: Python 3 interface to libapt-pkg
 The apt_pkg Python 3 interface will provide full access to the internal
 libapt-pkg structures allowing Python 3 programs to easily perform a
 variety of functions, such as:
 .
  - Access to the APT configuration system
  - Access to the APT package information database
  - Parsing of Debian package control files, and other files with a
    similar structure
 .
 The included 'aptsources' Python interface provides an abstraction of
 the sources.list configuration on the repository and the distro level.
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: python3-attr
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 207
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-attrs
Version: 21.2.0-1ubuntu1
Depends: python3:any
Suggests: python-attr-doc
Description: Attributes without boilerplate (Python 3)
 attrs is an MIT-licensed Python package with class decorators that ease the
 chores of implementing the most common attribute-related object protocols.
 .
 You just specify the attributes to work with and attrs gives you:
   - a nice human-readable __repr__,
   - a complete set of comparison methods,
   - an initializer,
   - and much more
 without writing dull boilerplate code again and again.
 .
 This package contains attrs packaged for Python 3.
Homepage: https://attrs.readthedocs.org/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-augeas
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 42
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-augeas
Version: 0.5.0-1.1
Depends: libaugeas0 (>= 0.7.2), python3:any (>= 3.3~)
Description: Python3 bindings for Augeas
 Augeas is a library and command line tool that focuses
 on the most basic problem in handling Linux configurations
 programmatically: editing actual configuration files in a
 controlled manner.
 .
 This module provides a Python3 interface to the Augeas API.
Original-Maintainer: Free Ekanayaka <freee@debian.org>
Homepage: http://augeas.net/

Package: python3-blinker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: blinker
Version: 1.4+dfsg1-0.4
Depends: python3:any
Suggests: python-blinker-doc
Description: fast, simple object-to-object and broadcast signaling library
 Blinker provides a fast dispatching system that allows any number of
 interested parties to subscribe to events, or "signals".
 .
 Signal receivers can subscribe to specific senders or receive signals
 sent by any sender.
 .
 This package contains the Python 3 version.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://pythonhosted.org/blinker/

Package: python3-botocore
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 62572
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-botocore
Version: 1.23.34+repack-1
Depends: python3-dateutil, python3-jmespath, python3-urllib3, python3:any, python3-requests
Breaks: awscli (<< 1.18.140)
Description: Low-level, data-driven core of boto 3 (Python 3)
 A low-level interface to a growing number of Amazon Web Services.
 The botocore package is the foundation for AWS-CLI.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Homepage: https://github.com/boto/botocore

Package: python3-certbot
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 836
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-certbot
Version: 1.21.0-1build1
Replaces: python-letsencrypt
Provides: python3-certbot-abi-1 (= 1.21)
Depends: python3-acme-abi-1 (>= 1.21), python3-requests, python3-acme, python3-configargparse, python3-configobj, python3-cryptography (>= 2.1.4), python3-distro, python3-josepy (>= 1.9.0), python3-parsedatetime (>= 2.4), python3-pkg-resources, python3-rfc3339, python3-tz, python3-zope.component, python3-zope.interface, python3:any
Recommends: certbot
Suggests: python-certbot-doc
Breaks: python-letsencrypt (<= 0.6.0)
Description: main library for certbot
 The objective of Certbot, Let's Encrypt, and the ACME (Automated
 Certificate Management Environment) protocol is to make it possible
 to set up an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention. This is
 accomplished by running a certificate management agent on the web
 server.
 .
 This agent is used to:
 .
   - Automatically prove to the Let's Encrypt CA that you control the website
   - Obtain a browser-trusted certificate and set it up on your web server
   - Keep track of when your certificate is going to expire, and renew it
   - Help you revoke the certificate if that ever becomes necessary.
 .
 This package contains the main libraries.
Original-Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Homepage: https://certbot.eff.org/

Package: python3-certbot-apache
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 321
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-certbot-apache
Version: 1.21.0-1
Replaces: python-letsencrypt-apache
Depends: apache2, certbot, python3-certbot-abi-1 (>= 1.21), python3-acme, python3-augeas, python3-certbot, python3-pkg-resources, python3:any
Suggests: python-certbot-apache-doc
Breaks: python-letsencrypt-apache
Description: Apache plugin for Certbot
 The objective of Certbot, Let's Encrypt, and the ACME (Automated
 Certificate Management Environment) protocol is to make it possible
 to set up an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention. This is
 accomplished by running a certificate management agent on the web
 server.
 .
 This agent is used to:
 .
   - Automatically prove to the Let's Encrypt CA that you control the website
   - Obtain a browser-trusted certificate and set it up on your web server
   - Keep track of when your certificate is going to expire, and renew it
   - Help you revoke the certificate if that ever becomes necessary.
 .
 This package contains the Apache plugin to the main application.
Original-Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Homepage: https://letsencrypt.org/

Package: python3-certifi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 324
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-certifi
Version: 2020.6.20-1
Depends: ca-certificates, python3:any
Description: root certificates for validating SSL certs and verifying TLS hosts (python3)
 Certifi is a carefully curated collection of Root Certificates for
 validating the trustworthiness of SSL certificates while verifying
 the identity of TLS hosts. It has been extracted from the Requests
 project.
 .
 The version of certifi in this Debian package is patched to return
 the location of Debian-provided CA certificates, instead of those
 packaged by upstream.
 .
 This is the python3 package.
Original-Maintainer: Sebastien Delafond <seb@debian.org>
Homepage: https://github.com/certifi/python-certifi

Package: python3-cffi-backend
Status: install ok installed
Priority: important
Section: python
Installed-Size: 218
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python-cffi
Version: 1.15.0-1build2
Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10495), python3-cffi-backend-api-min (= 9729)
Depends: python3 (<< 3.11), python3 (>= 3.10~), libc6 (>= 2.34), libffi8 (>= 3.4)
Description: Foreign Function Interface for Python 3 calling C code - runtime
 Convenient and reliable way of calling C code from Python 3.
 .
 The aim of this project is to provide a convenient and reliable way of calling
 C code from Python. It keeps Python logic in Python, and minimises the C
 required. It is able to work at either the C API or ABI level, unlike most
 other approaches, that only support the ABI level.
 .
 This package contains the runtime support for pre-built cffi modules.
Homepage: https://cffi.readthedocs.org/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1068
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: chardet
Version: 4.0.0-1
Replaces: python-chardet (<< 3.0.4-6)
Depends: python3:any, python3-pkg-resources
Breaks: python-chardet (<< 3.0.4-6)
Description: universal character encoding detector for Python3
 Chardet takes a sequence of bytes in an unknown character encoding, and
 attempts to determine the encoding.
 .
 Supported encodings:
  * ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants)
  * Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified
    Chinese)
  * EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese)
  * EUC-KR, ISO-2022-KR (Korean)
  * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic)
  * ISO-8859-2, windows-1250 (Hungarian)
  * ISO-8859-5, windows-1251 (Bulgarian)
  * windows-1252 (English)
  * ISO-8859-7, windows-1253 (Greek)
  * ISO-8859-8, windows-1255 (Visual and Logical Hebrew)
  * TIS-620 (Thai)
 .
 This library is a port of the auto-detection code in Mozilla.
 .
 This package contains the Python 3 version of the library.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Homepage: https://github.com/chardet/chardet

Package: python3-colorama
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 91
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-colorama
Version: 0.4.4-1
Depends: python3:any (>= 3.6~)
Description: Cross-platform colored terminal text in Python - Python 3.x
 Python-colorama provides a simple cross-platform API to print colored terminal
 text from Python applications.
 .
 ANSI escape character sequences are commonly used to produce colored terminal
 text on Unix. Colorama provides some shortcuts to generate these sequences.
 .
 This has the happy side-effect that existing applications or libraries which
 already use ANSI sequences to produce colored output on Linux.
 .
 This package provides the module for Python 3.
Original-Maintainer: Gürkan Myczko <gurkan@phys.ethz.ch>
Homepage: https://github.com/tartley/colorama

Package: python3-commandnotfound
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 59
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: command-not-found
Version: 22.04.0
Replaces: command-not-found (<< 0.3ubuntu7)
Depends: lsb-release, python3-apt, python3-gdbm, python3:any
Description: Python 3 bindings for command-not-found.
 This package will install the Python 3 library for command_not_found tool.
Original-Maintainer: Zygmunt Krynicki <zkrynicki@gmail.com>

Package: python3-configargparse
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-configargparse
Version: 1.5.3-1
Depends: python3:any
Description: replacement for argparse with config files and environment variables (Python 3)
 Applications with more than a handful of user-settable options are best
 configured through a combination of command line args, config files,
 hard-coded defaults, and in some cases, environment variables.
 .
 Python’s command line parsing modules such as argparse have very limited
 support for config files and environment variables, so this module extends
 argparse to add these features.
 .
 This is the Python 3 module.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/zorro3/ConfigArgParse

Package: python3-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 161
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: configobj
Version: 5.0.6-5ubuntu0.1
Depends: python3-six, python3:any
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 3
 ConfigObj is a simple but powerful config file reader and writer: an
 ini file round tripper. Its main feature is that it is very easy to
 use, with a straightforward programmer's interface and a simple
 syntax for config files. It has lots of other features, though:
 .
  * Nested sections (subsections), to any level
  * List values
  * Multiple line values
  * String interpolation (substitution)
  * Integrated with a powerful validation system
    + including automatic type checking/conversion
    + and allowing default values
    + repeated sections
  * All comments in the file are preserved
  * The order of keys/sections is preserved
  * Full Unicode support
  * Powerful unrepr mode for storing/retrieving Python data-types
 .
  This is the Python 3 version of the package.
Homepage: http://www.voidspace.org.uk/python/configobj.html
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1589
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-cryptography
Version: 3.4.8-1ubuntu2.2
Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3:any, libc6 (>= 2.14), libssl3 (>= 3.0.0~~alpha1)
Suggests: python-cryptography-doc, python3-cryptography-vectors
Breaks: python3-openssl (<< 16.0.0)
Description: Python library exposing cryptographic recipes and primitives (Python 3)
 The cryptography library is designed to be a "one-stop-shop" for
 all your cryptographic needs in Python.
 .
 As an alternative to the libraries that came before it, cryptography
 tries to address some of the issues with those libraries:
  - Lack of PyPy and Python 3 support.
  - Lack of maintenance.
  - Use of poor implementations of algorithms (i.e. ones with known
    side-channel attacks).
  - Lack of high level, "Cryptography for humans", APIs.
  - Absence of algorithms such as AES-GCM.
  - Poor introspectability, and thus poor testability.
  - Extremely error prone APIs, and bad defaults.
 .
 This package contains the Python 3 version of cryptography.
Homepage: https://cryptography.io/
Original-Maintainer: Tristan Seligmann <mithrandi@debian.org>

Package: python3-dateutil
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 322
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-dateutil
Version: 2.8.1-6
Depends: python3-six (>= 1.5), python3:any, tzdata
Breaks: khal (<< 1:0.9.10-0.1~), python3-icalendar (<< 4.0.3-2~), python3-vobject (<< 0.9.6.1-0.1~)
Description: powerful extensions to the standard Python 3 datetime module
 It features:
 .
  * computing of relative deltas (next month, next year, next monday, last week
    of month, etc);
  * computing of relative deltas between two given date and/or datetime objects
  * computing of dates based on very flexible recurrence rules, using a superset
    of the iCalendar specification. Parsing of RFC strings is supported as well.
  * generic parsing of dates in almost any string format
  * timezone (tzinfo) implementations for tzfile(5) format files
    (/etc/localtime, /usr/share/zoneinfo, etc), TZ environment string (in all
    known formats), iCalendar format files, given ranges (with help from
    relative deltas), local machine timezone, fixed offset timezone, UTC
    timezone
  * computing of Easter Sunday dates for any given year, using Western, Orthodox
    or Julian algorithms
 .
 This package provides the Python 3 version of the datetime module.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-dbus
Status: install ok installed
Priority: important
Section: python
Installed-Size: 417
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dbus-python
Version: 1.2.18-3build1
Provides: python3.10-dbus
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.40)
Recommends: python3-gi
Suggests: python-dbus-doc
Description: simple interprocess messaging system (Python 3 interface)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides a Python 3 interface to D-Bus.
 .
 See the dbus description for more information about D-Bus in general.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://www.freedesktop.org/wiki/Software/DBusBindings#Python

Package: python3-dev
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 145
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.10.6-1~22.04.1
Replaces: python3 (<< 3.9.2-1~), python3.1 (<< 3.1.2+20100706-3)
Depends: python3 (= 3.10.6-1~22.04.1), libpython3-dev (= 3.10.6-1~22.04.1), python3.10-dev (>= 3.10.6-1~), python3-distutils (>= 3.10.6-1~), libjs-sphinxdoc (>= 4.3)
Breaks: python3 (<< 3.9.2-1~)
Description: header files and a static library for Python (default)
 Header files, a static library and development tools for building
 Python modules, extending the Python interpreter or embedding Python
 in applications.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version's headers (currently v3.10).
Original-Maintainer: Matthias Klose <doko@debian.org>
Built-Using: sphinx (= 4.3.2-1)
Homepage: https://www.python.org/

Package: python3-distlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: distlib
Version: 0.3.4-1
Depends: python3:any
Description: low-level components of python distutils2/packaging
 Distlib is a library which implements low-level functions that relate to
 packaging and distribution of Python software. It is intended to be used
 as the basis for third-party packaging tools.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://pypi.python.org/pypi/distlib

Package: python3-distro
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-distro
Version: 1.7.0-1
Depends: lsb-release, python3:any
Description: Linux OS platform information API
 distro (for: Linux Distribution) provides information about the Linux
 distribution it runs on, such as a reliable machine-readable ID, or version
 information.
 .
 It is a renewed alternative implementation for Python's original
 platform.linux_distribution function, but it also provides much more
 functionality which isn't necessarily Python bound like a command-line
 interface.
 .
 This is the Python 3 version of the library.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/python-distro/distro

Package: python3-distro-info
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: distro-info
Version: 1.1ubuntu0.2
Depends: distro-info-data (>= 0.46), python3:any
Description: information about distributions' releases (Python 3 module)
 Information about all releases of Debian and Ubuntu.
 .
 This package contains a Python 3 module for parsing the data in
 distro-info-data. There is also a command line interface in the distro-info
 package.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>

Package: python3-distupgrade
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 639
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:22.04.20
Replaces: python3-update-manager (<< 1:0.165)
Depends: python3:any, python3-update-manager (>= 1:19.04.2~), python3-apt (>= 0.8.5~), python3-dbus, python3-distro-info, python3-yaml, gpgv, lsb-release, sensible-utils, procps
Breaks: python3-update-manager (<< 1:0.165)
Description: manage release upgrades
 This is the DistUpgrade Python 3 module

Package: python3-distutils
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 757
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python3-stdlib-extensions
Version: 3.10.8-1~22.04
Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-2)
Provides: python3.10-distutils, python3.11-distutils
Depends: python3:any (>= 3.10.5-0~), python3:any (<< 3.12), python3-lib2to3 (= 3.10.8-1~22.04)
Breaks: libpython3.10-stdlib (<< 3.10.0~b1), libpython3.6-stdlib (<< 3.6.5~rc1-3), libpython3.7-stdlib (<< 3.7.0~b2-2), libpython3.8-stdlib (<< 3.8.0~b2-5)
Description: distutils package for Python 3.x
 Distutils package for Python 3.x.  This package contains the distutils module
 from the Python standard library.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-docker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 537
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-docker
Version: 5.0.3-1
Depends: python3-distutils, python3-requests (>= 2.14.2~), python3-websocket (>= 0.32.0~), python3:any
Description: Python 3 wrapper to access docker.io's control socket
 This package contains oodles of routines that aid in controlling
 docker.io over it's socket control, the same way the docker.io
 client controls the daemon.
 .
 This package provides Python 3 module bindings only.
Original-Maintainer: Docker Compose Team <team+docker-compose@tracker.debian.org>
Homepage: https://github.com/docker/docker-py

Package: python3-dockerpty
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: dockerpty
Version: 0.4.1-2
Depends: python3-six, python3:any
Recommends: python3-docker (>= 0.7.1)
Description: Pseudo-tty handler for docker Python client (Python 3.x)
 Provides the functionality needed to operate the pseudo-tty (PTY) allocated to
 a docker container, using the Python client.
 .
 This package provides Python 3.x version of dockerpty.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/d11wtq/dockerpty

Package: python3-docopt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: docopt
Version: 0.6.2-4
Depends: python3:any
Description: command-line interface description language (Python3)
 docopt helps you define an interface for your command-line app and
 automatically generate a parser for it. Its interface descriptions are
 based on a formalization of the standard conventions used in help
 messages and man pages.
 .
 This is the Python 3 compatible version of the package.
Original-Maintainer: Agustin Henze <tin@debian.org>
Homepage: http://docopt.org

Package: python3-docutils
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1810
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-docutils
Version: 0.17.1+dfsg-2
Provides: docutils
Depends: docutils-common (= 0.17.1+dfsg-2), python3-roman, python3:any
Recommends: libpaper-utils, python3-pil, python3-pygments
Suggests: docutils-doc, fonts-linuxlibertine | ttf-linux-libertine, texlive-lang-french, texlive-latex-base, texlive-latex-recommended
Breaks: python-docutils (<< 0.16+dfsg-3), python3-sphinx (<< 4.0)
Description: text processing system for reStructuredText (implemented in Python 3)
 reStructuredText is an easy-to-read, what-you-see-is-what-you-get plaintext
 markup syntax and parser system. It is useful for in-line program documentation
 (such as Python docstrings), for quickly creating simple web pages, and for
 standalone documents.
 .
 The purpose of the Docutils project is to create a set of tools for
 processing reStructuredText documentation into useful formats, such as HTML,
 LaTeX, ODT or Unix manpages.
 .
 This package includes Python 3 modules and command line utilities.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://docutils.sourceforge.io/

Package: python3-dotenv
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-dotenv
Version: 0.19.2-1
Depends: python3:any
Description: Get and set values in the .env file in local and production servers
 Reads key value pairs from the .env file and adds them to environment.
 variables. It is useful to manage settings during development and in
 production following the 12-factor principles: http://12factor.net/
 The executable is named python-dotenv
Original-Maintainer: Federico Ceratto <federico@debian.org>
Homepage: https://github.com/theskumar/python-dotenv

Package: python3-filelock
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 43
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-filelock
Version: 3.6.0-1
Depends: python3:any
Description: platform independent file locking module
 This package contains a single module, which implements a platform independent
 file locking mechanism for Python. The lock includes a lock counter and is
 thread safe. This means, when locking the same lock object twice, it will not
 block.
Original-Maintainer: Sascha Steinbiss <satta@debian.org>
Homepage: https://github.com/benediktschmitt/py-filelock

Package: python3-gdbm
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-stdlib-extensions
Version: 3.10.8-1~22.04
Provides: python3.10-gdbm, python3.11-gdbm
Depends: python3 (>= 3.10.5-0~), python3 (<< 3.12), libc6 (>= 2.4), libgdbm6 (>= 1.16)
Suggests: python3-gdbm-dbg
Description: GNU dbm database support for Python 3.x
 GNU dbm database module for Python 3.x. Install this if you want to
 create or read GNU dbm database files with Python.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-gi
Status: install ok installed
Priority: important
Section: python
Installed-Size: 747
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: pygobject
Version: 3.42.1-0ubuntu1
Depends: gir1.2-glib-2.0 (>= 1.48.0), python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.14), libffi8 (>= 3.4), libgirepository-1.0-1 (>= 1.62.0-4~), libgirepository-1.0-1-with-libffi8 (>= 1.62.0-4~), libglib2.0-0 (>= 2.56.0)
Description: Python 3 bindings for gobject-introspection libraries
 GObject is an abstraction layer that allows programming with an object
 paradigm that is compatible with many languages. It is a part of Glib,
 the core library used to build GTK+ and GNOME.
 .
 This package contains the Python 3 binding generator for libraries that
 support gobject-introspection, i. e. which ship a gir1.2-<name>-<version>
 package. With these packages, the libraries can be used from Python 3.
Homepage: https://wiki.gnome.org/Projects/PyGObject
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: python3-httplib2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-httplib2
Version: 0.20.2-2
Depends: ca-certificates, python3-pyparsing, python3:any
Breaks: python3-pysimplesoap (<< 1.16-2.1), python3-wsgi-intercept (<< 1.9.0)
Description: comprehensive HTTP client library written for Python3
 httplib2.py supports many features left out of other HTTP libraries.
  * HTTP and HTTPS
  * Keep-Alive
  * Authentication
  * Caching
  * All Methods
  * Redirects
  * Compression
  * Lost update support
  * Unit Tested
 .
 This package provides module for python3 series.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/httplib2/httplib2

Package: python3-icu
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2715
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pyicu
Version: 2.8.1-0ubuntu2
Provides: python3.10-icu
Depends: libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), libicu70 (>= 70.1-1~), libstdc++6 (>= 5), python3 (<< 3.11), python3 (>= 3.10~), python3:any
Description: Python 3 extension wrapping the ICU C++ API
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support. This package provides an extension for
 Python 3 which wraps the ICU C++ API.
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Homepage: https://gitlab.pyicu.org/main/pyicu
Python-Version: 3.10

Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 332
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-idna
Version: 3.3-1ubuntu0.1
Depends: python3:any
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
 A library to support the Internationalised Domain Names in Applications (IDNA)
 protocol as specified in RFC 5891. This version of the protocol is often
 referred to as “IDNA2008” and can produce different results from the earlier
 standard from 2003.
 .
 The library is also intended to act as a suitable drop-in replacement for the
 “encodings.idna” module that comes with the Python standard library but
 currently only supports the older 2003 specification.
 .
 This package contains the module for Python 3.
Homepage: https://github.com/kjd/idna
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-importlib-metadata
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-importlib-metadata
Version: 4.6.4-1
Depends: python3-zipp (>= 0.5), python3:any
Description: library to access the metadata for a Python package - Python 3.x
 Provides an API for accessing an installed package’s metadata, such as its
 entry points or its top-level name. This functionality intends to replace
 most uses of pkg_resources entry point API and metadata API.
 .
 This package contains Python 3.x module.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/python/importlib_metadata

Package: python3-jeepney
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 186
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: jeepney
Version: 0.7.1-3
Depends: python3:any
Description: pure Python D-Bus interface
 Jeepney is a pure Python implementation of D-Bus messaging. It has an
 I/O-free core, and integration modules for different event loops.
 .
 D-Bus is an inter-process communication system, mainly used in Linux.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://gitlab.com/takluyver/jeepney

Package: python3-jmespath
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 98
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-jmespath
Version: 0.10.0-1
Depends: python3:any
Description: JSON Matching Expressions (Python 3)
 JMESPath is python library which allows you to declaratively specify how
 to extract elements from a JSON document.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/boto/jmespath

Package: python3-josepy
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 103
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-josepy
Version: 1.10.0-1
Depends: python3-cryptography (>= 0.8), python3-openssl (>= 0.13), python3-pkg-resources, python3:any
Description: JOSE implementation for Python 3.x
 This package is a Python implementation of the standards developed by
 IETF Javascript Object Signing and Encryption (Active WG), in
 particular the following RFCs:
 .
   - JSON Web Algorithms (JWA)
   - JSON Web Key (JWK)
   - JSON Web Signature (JWS)
 .
 This package was originally developed as part of the ACME protocol
 implementation.  This is the Python 3 library.
Original-Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Homepage: https://certbot.eff.org/

Package: python3-jsonschema
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 259
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-jsonschema
Version: 3.2.0-0ubuntu2
Depends: python3-attr, python3-pkg-resources, python3-setuptools, python3-six (>= 1.11.0), python3-importlib-metadata, python3-pyrsistent, python3:any
Suggests: python-jsonschema-doc
Description: An(other) implementation of JSON Schema (Draft 3 and 4) - Python 3.x
 JSON Schema is a specification for a JSON-based format for defining
 the structure of JSON data. JSON Schema provides a contract for what
 JSON data is required for a given application and how it can be
 modified, much like what XML Schema provides for XML. JSON Schema is
 intended to provide validation, documentation, and interaction control
 of JSON data.
 .
 This package contains the Python 3.x module.
Original-Maintainer: Debian OpenStack <team+openstack@tracker.debian.org>
Homepage: https://github.com/Julian/jsonschema

Package: python3-jwt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 82
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyjwt
Version: 2.3.0-1ubuntu0.2
Depends: python3:any
Recommends: python3-cryptography
Suggests: python3-crypto
Description: Python 3 implementation of JSON Web Token
 PyJWT implements the JSON Web Token draft 01, a way of representing
 signed content using JSON data structures.
 .
 Supported algorithms for cryptographic signing:
 .
   * HS256 - HMAC using SHA-256 hash algorithm (default)
   * HS384 - HMAC using SHA-384 hash algorithm
   * HS512 - HMAC using SHA-512 hash algorithm
   * RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash
     algorithm
   * RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash
     algorithm
   * RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash
     algorithm
 .
 Supported reserved claim names:
   - "exp" (Expiration Time) Claim
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/jpadilla/pyjwt
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-keyring
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-keyring
Version: 23.5.0-1
Depends: python3-importlib-metadata (>= 3.6), python3-jeepney (>= 0.4.2), python3-secretstorage (>= 3.2), python3:any
Suggests: gir1.2-secret-1, gnome-keyring, libkf5wallet-bin, python3-dbus, python3-gi, python3-keyrings.alt
Breaks: python3-keyrings.alt (<< 3.1), python3-wheel (<< 0.27)
Description: store and access your passwords safely
 The Python keyring library provides an easy way to access the system
 keyring service (e.g Gnome-Keyring, KWallet) from Python.
 It can be used in any application that needs safe password storage.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/jaraco/keyring

Package: python3-launchpadlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1762
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-launchpadlib
Version: 1.10.16-1
Depends: python3-httplib2, python3-keyring, python3-lazr.restfulclient, python3-lazr.uri, python3:any
Suggests: python3-pkg-resources, python3-testresources
Description: Launchpad web services client library (Python 3)
 A free Python library for scripting Launchpad through its web services
 interface.
 .
 It currently provides access to the following parts of Launchpad:
  * People and Teams
  * Team memberships
  * Bugs and bugtasks
 .
 The Launchpad API is currently in beta, and may well change in ways
 incompatible with this library.
 .
 This package is for Python 3.
Original-Maintainer: Stefano Rivera <stefanor@debian.org>
Homepage: https://launchpad.net/launchpadlib

Package: python3-lazr.restfulclient
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: lazr.restfulclient
Version: 0.14.4-1
Depends: python3-httplib2 (>= 0.7.7), python3-lazr.uri, python3-wadllib (>= 1.1.4), python3-distro, python3-oauthlib, python3-pkg-resources, python3-six, python3:any
Description: client for lazr.restful-based web services (Python 3)
 A programmable client library that takes advantage of the commonalities
 among lazr.rest web services to provide added functionality on top
 of wadllib.
 .
 This package is for Python 3.
Original-Maintainer: Stefano Rivera <stefanor@debian.org>
Homepage: https://launchpad.net/lazr.restfulclient

Package: python3-lazr.uri
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: lazr.uri
Version: 1.0.6-2
Depends: python3-importlib-metadata | python3 (>> 3.8), python3-pkg-resources, python3:any
Description: library for parsing, manipulating, and generating URIs
 A self-contained, easily reusable, Python library for parsing,
 manipulating and generating URIs. With it you can extract parts
 of a URL, compare URIs to see if one contains another, search for
 URIs in text, and many other things.
 .
 This package contains the library for Python 3.x.
Original-Maintainer: Stefano Rivera <stefanor@debian.org>
Homepage: https://launchpad.net/lazr.uri

Package: python3-lib2to3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 388
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python3-stdlib-extensions
Version: 3.10.8-1~22.04
Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3)
Provides: python3.10-lib2to3, python3.11-lib2to3
Depends: python3:any (>= 3.10.5-0~), python3:any (<< 3.12)
Breaks: libpython3.10-stdlib (<< 3.10.0~b1), libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3)
Description: Interactive high-level object-oriented language (lib2to3)
 Python is a high-level, interactive, object-oriented language. It
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains the lib2to3 library, a Python2 to Python3 converter.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-minimal
Status: install ok installed
Priority: important
Section: python
Installed-Size: 122
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.10.6-1~22.04.1
Depends: dpkg (>= 1.13.20)
Pre-Depends: python3.10-minimal (>= 3.10.6-1~)
Description: minimal subset of the Python language (default python3 version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python3.10-minimal/README.Debian for a list of the modules
 contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://www.python.org/
Cnf-Visible-Pkgname: python3

Package: python3-more-itertools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 226
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: more-itertools
Version: 8.10.0-2
Depends: python3:any
Description: library with routines for operating on iterables, beyond itertools (Python 3)
 Python's itertools library is a gem - you can compose elegant solutions
 for a variety of problems with the functions it provides.
 More-itertools collects additional building blocks, recipes,
 and routines for working with Python iterables.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/more-itertools/more-itertools/

Package: python3-nacl
Status: install ok installed
Priority: important
Section: python
Installed-Size: 415
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-nacl
Version: 1.5.0-2
Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3:any, libc6 (>= 2.4), libsodium23 (>= 1.0.18)
Suggests: python-nacl-doc
Description: Python bindings to libsodium (Python 3)
 PyNaCl is a Python binding to the Networking and Cryptography library (in the
 form of libsodium), a crypto library with the stated goal of improving
 usability, security and speed.
 .
 This package contains the Python 3 version of pynacl.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/pyca/pynacl/

Package: python3-netifaces
Status: install ok installed
Priority: important
Section: python
Installed-Size: 54
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: netifaces
Version: 0.11.0-1build2
Depends: python3 (<< 3.11), python3 (>= 3.10~), libc6 (>= 2.4)
Description: portable network interface information - Python 3.x
 netifaces provides a (hopefully portable-ish) way for Python programmers to
 get access to a list of the network interfaces on the local machine, and to
 obtain the addresses of those network interfaces.
 .
 This package contains the module for Python 3.x.
Homepage: https://alastairs-place.net/projects/netifaces/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-oauthlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 556
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-oauthlib
Version: 3.2.0-1ubuntu0.1
Depends: python3:any, python3-blinker, python3-cryptography, python3-jwt (>= 1.0.0)
Description: generic, spec-compliant implementation of OAuth for Python3
 OAuthLib is a generic utility which implements the logic of OAuth without
 assuming a specific HTTP request object. It can be used to graft OAuth support
 onto HTTP libraries.
 .
 OAuth 1 is fully supported per the RFC for both clients and providers.
 .
 OAuth 2 client and provider support for:
 .
   - Authorization Code Grant
   - Implicit Grant
   - Client Credentials Grant
   - Resource Owner Password Credentials Grant
   - Refresh Tokens
   - Bearer Tokens
   - Draft MAC tokens
   - Token Revocation
   - OpenID Connect Authentication
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/idan/oauthlib
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-olefile
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: olefile
Version: 0.46-3
Depends: python3:any
Description: Python module to read/write MS OLE2 files
 Python package to parse, read and write Microsoft OLE2 files (also called
 Structured Storage, Compound File Binary Format or Compound Document File
 Format), such as Microsoft Office 97-2003 documents, vbaProject.bin in
 MS Office 2007+ files, Image Composer and FlashPix files, Outlook MSG files,
 StickyNotes, several Microscopy file formats, McAfee antivirus quarantine
 files, etc.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.decalage.info/olefile

Package: python3-openssl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 238
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyopenssl
Version: 21.0.0-1
Depends: python3-cryptography (>= 3.3), python3-six (>= 1.5.2), python3:any
Suggests: python-openssl-doc, python3-openssl-dbg
Description: Python 3 wrapper around the OpenSSL library
 High-level wrapper around a subset of the OpenSSL library, includes
 .
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error
     codes
 .
 A lot of the object methods do nothing more than calling a
 corresponding function in the OpenSSL library.
 .
 This package contains the Python 3 version of pyopenssl.
Original-Maintainer: Sandro Tosi <morph@debian.org>
Homepage: https://pyopenssl.org/

Package: python3-parsedatetime
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 176
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: parsedatetime
Version: 2.6-2
Depends: python3:any
Recommends: python3-icu
Description: Python 3 module to parse human-readable date/time expressions
 parsedatetime is able to parse, for example, the following:
 .
   * August 25th, 2008
   * 25 Aug 2008
   * Aug 25 5pm
   * 5pm August 25
   * next saturday
   * tomorrow
   * next thursday at 4pm
   * at 4pm
   * eod
   * tomorrow eod
   * eod tuesday
   * eoy
   * eom
   * in 5 minutes
   * 5 minutes from now
   * 5 hours before now
   * 2 hours before noon
   * 2 days from tomorrow
 .
 This package provides the modules for Python 3.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/bear/parsedatetime

Package: python3-pil
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1654
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pillow
Version: 9.0.1-1ubuntu0.3
Replaces: python3-imaging (<< 1.1.7+2.0.0-1.1)
Provides: python3-pillow
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, mime-support | python3-pil.imagetk, libc6 (>= 2.14), libfreetype6 (>= 2.10.1), libimagequant0 (>= 2.11.10), libjpeg8 (>= 8c), liblcms2-2 (>= 2.7), libopenjp2-7 (>= 2.0.0), libraqm0 (>= 0.7.0), libtiff5 (>= 4.0.3), libwebp7, libwebpdemux2, libwebpmux3, libxcb1, zlib1g (>= 1:1.1.4)
Recommends: python3-olefile
Suggests: python-pil-doc
Breaks: python3-imaging (<< 1.1.7+2.0.0-1.1)
Conflicts: python3-imaging (<< 1.1.7+2.0.0-1.1)
Description: Python Imaging Library (Python3)
 The Python Imaging Library (PIL) adds an image object to your Python
 interpreter. You can load images from a variety of file formats, and
 apply a rich set of image operations to them.
 .
 Image Objects:
  o Bilevel, greyscale, palette, true colour (RGB), true colour with
    transparency (RGBA).
  o colour separation (CMYK).
  o Copy, cut, paste operations.
  o Flip, transpose, resize, rotate, and arbitrary affine transforms.
  o Transparency operations.
  o Channel and point operations.
  o Colour transforms, including matrix operations.
  o Image enhancement, including convolution filters.
 .
 File Formats:
  o Full (Open/Load/Save): BMP, EPS (with ghostscript), GIF, IM, JPEG,
    MSP, PDF, PNG, PPM, TIFF, XBM.
  o Read only (Open/Load): ARG, CUR, DCX, FLI, FPX, GBR, GD, ICO, IMT, IPTC,
    MCIDAS, MPEG, PhotoCD, PCX, PIXAR, PSD, TGA, SGI, SUN, TGA, WMF, XPM.
  o Save only: PDF, EPS (without ghostscript).
Homepage: http://python-pillow.github.io/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-pip
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 6913
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-pip
Version: 22.0.2+dfsg-1ubuntu0.7
Replaces: python-pip
Provides: pip
Depends: ca-certificates, python3-distutils, python3-setuptools, python3-wheel, python3:any
Recommends: build-essential, python3-dev (>= 3.2)
Breaks: python-pip
Description: Python package installer
 pip is the Python package installer.  It integrates with virtualenv, doesn't
 do partial installs, can save package state for replaying, can install from
 non-egg sources, and can install from version control repositories.
 .
 This is the Python 3 version of the package.
Homepage: https://pip.pypa.io/en/stable/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-pip-whl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1786
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-pip
Version: 22.0.2+dfsg-1ubuntu0.7
Replaces: python-pip-whl (<< 21.3.1+dfsg-2~)
Depends: ca-certificates
Breaks: python-pip-whl (<< 21.3.1+dfsg-2~)
Description: Python package installer (pip wheel)
 pip is the Python package installer.  It integrates with virtualenv, doesn't
 do partial installs, can save package state for replaying, can install from
 non-egg sources, and can install from version control repositories.
 .
 This is the support package for the PEP 427 wheel version of the package,
 required for using pip inside a virtual environment.
Homepage: https://pip.pypa.io/en/stable/
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-pkg-resources
Status: install ok installed
Priority: important
Section: python
Installed-Size: 581
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 59.6.0-1.2ubuntu0.22.04.3
Depends: python3:any
Suggests: python3-setuptools
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-platformdirs
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: platformdirs
Version: 2.5.1-1
Depends: python3:any
Description: determining appropriate platform-specific directories (Python 3)
 Depending on your system (Linux, Mac OS X, or Windows), you have to use
 different directories for storing user data. platformdirs will help you choose
 an appropriate:
 .
  * user data directory (user_data_dir function)
  * user config directory (user_config_dir function)
  * user cache directory (user_cache_dir function)
  * site data directory (site_data_dir function)
  * site config directory (site_config_dir function)
  * user log directory (user_log_dir function)
 .
 On Linux systems, these function return directories based on the XDG Base
 Directory Specification.
 .
 This is the Python 3 version of the package.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/platformdirs/platformdirs

Package: python3-pyasn1
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 390
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyasn1
Version: 0.4.8-1
Depends: python3:any
Breaks: python3-pysnmp4 (<< 4.3.4)
Description: ASN.1 library for Python (Python 3 module)
 This  is  an implementation  of  ASN.1  types  and codecs  in  Python
 programming language. It has been first written to support particular
 protocol (SNMP) but then generalized  to be suitable for a wide range
 of protocols based on ASN.1 specification.
 .
 This package contains the Python 3 module.
Original-Maintainer: Jan Lübbe <jluebbe@debian.org>
Homepage: http://snmplabs.com/pyasn1/index.html

Package: python3-pygments
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 4024
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: pygments
Version: 2.11.2+dfsg-2ubuntu0.1
Replaces: python-pygments (<< 2.3.1+dfsg-4~)
Depends: python3-pkg-resources, python3:any
Suggests: python-pygments-doc, ttf-bitstream-vera
Breaks: python-pygments (<< 2.3.1+dfsg-4~)
Description: syntax highlighting package written in Python 3
 Pygments aims to be a generic syntax highlighter for general use in all kinds
 of software such as forum systems, wikis or other applications that need to
 prettify source code.
 .
 Highlights are:
   * a wide range of common languages and markup formats is supported
   * special attention is paid to details, increasing quality by a fair amount
   * support for new languages and formats are added easily
   * a number of output formats, presently HTML, LaTeX and ANSI sequences
   * it is usable as a command-line tool and as a library
Homepage: http://pygments.org/
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>

Package: python3-pymacaroons
Status: install ok installed
Priority: important
Section: python
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: pymacaroons
Version: 0.13.0-4
Depends: python3-nacl (>= 1.1.2), python3-six (>= 1.8.0), python3:any
Description: Macaroon library for Python 3
 Macaroons, like cookies, are a form of bearer credential.  Unlike opaque
 tokens, macaroons embed caveats that define specific authorization
 requirements for the target service, the service that issued the root
 macaroon and which is capable of verifying the integrity of macaroons it
 receives.
 .
 Macaroons allow for delegation and attenuation of authorization.  They are
 simple and fast to verify, and decouple authorization policy from the
 enforcement of that policy.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/ecordell/pymacaroons

Package: python3-pyparsing
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 298
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyparsing
Version: 2.4.7-1
Depends: python3:any
Suggests: python-pyparsing-doc
Description: alternative to creating and executing simple grammars - Python 3.x
 The parsing module is an alternative approach to creating and
 executing simple grammars, vs. the traditional lex/yacc approach, or
 the use of regular expressions.  The parsing module provides a
 library of classes that client code uses to construct the grammar
 directly in Python code.
 .
 Here's an example:
 .
  from pyparsing import Word, alphas
  greet = Word(alphas) + "," + Word(alphas) + "!"
  hello = "Hello, World!"
  print hello, "->", greet.parseString(hello)
 .
 This package contains the Python 3.x version of python-pyparsing.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/pyparsing/pyparsing/

Package: python3-pyrsistent
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 249
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pyrsistent
Version: 0.18.1-1build1
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.14)
Description: persistent/functional/immutable data structures for Python
 Pyrsistent is a number of persistent collections (sometimes referred
 to as functional data structures). Persistent in  the sense that they
 are immutable.
 .
 All methods on a data structure that would normally mutate it instead
 return a new copy of the structure containing the requested updates.
 The original structure is left untouched.
 .
 The collection types and key features currently implemented are:
 .
  * PVector, similar to a python list
  * PMap, similar to dict
  * PSet, similar to set
  * PRecord, a PMap on steroids with fixed fields, optional type and
    invariant checking and much more
  * PClass, a Python class fixed fields, optional type and invariant
    checking and much more
  * Checked collections, PVector, PMap and PSet with optional type
    and invariance checks and more
  * PBag, similar to collections.Counter
  * PList, a classic singly linked list
  * PDeque, similar to collections.deque
  * Immutable object type (immutable) built on the named tuple
  * freeze and thaw functions to convert between pythons standard
    collections and pyrsistent collections.
  * Flexible transformations of arbitrarily complex structures built
    from PMaps and PVectors.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/tobgu/pyrsistent/

Package: python3-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 230
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: requests
Version: 2.25.1+dfsg-2ubuntu0.3
Depends: python3-certifi, python3-chardet (>= 3.0.2), python3-idna, python3-urllib3 (>= 1.21.1), python3:any, ca-certificates
Suggests: python3-cryptography, python3-idna (>= 2.5), python3-openssl, python3-socks, python-requests-doc
Breaks: awscli (<< 1.11.139)
Description: elegant and simple HTTP library for Python3, built for human beings
 Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
 multipart files, and parameters with simple Python dictionaries, and access
 the response data in the same way. It's powered by httplib and urllib3, but
 it does all the hard work and crazy hacks for you.
 .
 Features
 .
   - International Domains and URLs
   - Keep-Alive & Connection Pooling
   - Sessions with Cookie Persistence
   - Browser-style SSL Verification
   - Basic/Digest Authentication
   - Elegant Key/Value Cookies
   - Automatic Decompression
   - Unicode Response Bodies
   - Multipart File Uploads
   - Connection Timeouts
 .
 This package contains the Python 3 version of the library.
Homepage: http://python-requests.org
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-requests-toolbelt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 187
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-requests-toolbelt
Version: 0.9.1-1
Depends: python3-requests, python3:any
Description: Utility belt for advanced users of python3-requests
 Collection of utilities for python3-requests
 It provides transport adapters: FingerprintAdapter, SSLAdapter,
 SourceAddressAdapter, SocketOptionsAdapter, TCPKeepAliveAdapter
 and authenticators: AuthHandler, GuessAuth, HTTPProxyDigestAuth
 Also a cookiejar, streaming helpers and more.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://pypi.python.org/pypi/requests-toolbelt

Package: python3-rfc3339
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 33
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyrfc3339
Version: 1.1-3
Depends: python3-tz, python3:any
Description: parser and generator of RFC 3339-compliant timestamps (Python 3)
 pyRFC3339 parses and generates RFC 3339-compliant timestamps using Python
 datetime.datetime objects.
 .
 This is the Python 3 module.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/kurtraschke/pyRFC3339

Package: python3-roman
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 41
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: python-roman
Version: 3.3-1
Depends: python3:any
Description: module for generating/analyzing Roman numerals for Python 3
 This module converts from and to Roman numerals. It can convert numbers
 from 1 to 4999 and understands the common shortcuts (IX == 9), but not
 illegal ones (MIM == 1999).
 .
 This package includes Python 3 modules.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/zopefoundation/roman

Package: python3-rsa
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 130
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-rsa
Version: 4.8-1
Depends: python3, python3-pyasn1 (>= 0.1.3), python3:any
Description: Pure-Python RSA implementation (Python 3)
 Python-RSA is a pure-Python RSA implementation. It supports encryption
 and decryption, signing and verifying signatures, and key generation
 according to PKCS#1 version 1.5. It can be used as a Python library as
 well as on the commandline. The code was mostly written by Sybren A. Stüvel.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: http://stuvel.eu/rsa

Package: python3-s3transfer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-s3transfer
Version: 0.5.0-1
Depends: python3-botocore, python3:any
Description: Amazon S3 Transfer Manager for Python3
 S3transfer is a Python library for managing Amazon S3 transfers.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/boto/s3transfer

Package: python3-secretstorage
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-secretstorage
Version: 3.3.1-1
Depends: dbus, python3-jeepney (>= 0.6), python3-cryptography (>= 2.0), python3:any
Suggests: gnome-keyring (>= 2.30), python-secretstorage-doc
Description: Python module for storing secrets - Python 3.x version
 Python-SecretStorage provides a way for securely storing passwords
 and other secrets.
 .
 It uses D-Bus Secret Service API that is supported by GNOME Keyring
 (>= 2.30) and KSecretsService.
 .
 It allows one to create, edit and delete secret items, manipulate
 secret collections, and search for items matching given attributes.
 It also supports locking and unlocking collections.
 .
 This package provides Python 3.x version of SecretStorage.
Original-Maintainer: Dmitry Shachnev <mitya57@debian.org>
Homepage: https://github.com/mitya57/secretstorage

Package: python3-setuptools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1749
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 59.6.0-1.2ubuntu0.22.04.3
Depends: python3-pkg-resources (= 59.6.0-1.2ubuntu0.22.04.3), python3-distutils, python3:any
Suggests: python-setuptools-doc
Description: Python3 Distutils Enhancements
 Extensions to the python-distutils for large or complex distributions.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-setuptools-whl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1009
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: setuptools
Version: 59.6.0-1.2ubuntu0.22.04.3
Replaces: python-pip-whl (<< 21.3.1+dfsg-2~)
Breaks: python-pip-whl (<< 21.3.1+dfsg-2~)
Description: Python Distutils Enhancements (wheel package)
 Extensions to the python-distutils for large or complex distributions.
 .
 This is the support package for the PEP 427 wheel version of the package,
 required for using setuptools inside a virtual environment.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-six
Status: install ok installed
Priority: important
Section: python
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.16.0-3ubuntu1
Depends: python3:any
Breaks: libpython-stdlib (<< 2.7.18), python-minimal (<< 2.7.18)
Description: Python 2 and 3 compatibility library (Python 3 interface)
 Six is a Python 2 and 3 compatibility library. It provides utility
 functions for smoothing over the differences between the Python versions
 with the goal of writing Python code that is compatible on both Python
 versions.
 .
 This package provides Six on the Python 3 module path. It is complemented
 by python-six and pypy-six.
Homepage: https://github.com/benjaminp/six
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-software-properties
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 175
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: software-properties
Version: 0.99.22.9
Depends: gpg, iso-codes, lsb-release, python3, python3-apt (>= 0.6.20ubuntu16), python3-gi, python3-launchpadlib, python3:any
Recommends: unattended-upgrades
Description: manage the repositories that you install software from
 This software provides an abstraction of the used apt repositories.
 It allows you to easily manage your distribution and independent software
 vendor software sources.

Package: python3-texttable
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: texttable
Version: 1.6.4-1
Depends: python3:any
Description: Module for creating simple ASCII tables — python3
 texttable is a module to generate a formatted text table, using ASCII
 characters.
 It provides nice human-readable output for arrays when designing
 a CLI or just output data.
 .
 This package contains the Python 3 module.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/foutaise/texttable

Package: python3-tz
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-tz
Version: 2022.1-1ubuntu0.22.04.1
Depends: tzdata, python3:any
Description: Python3 version of the Olson timezone database
 python-tz brings the Olson tz database into Python. This library allows
 accurate and cross platform timezone calculations using Python 2.3 or higher.
 It also solves the issue of ambiguous times at the end of daylight savings,
 which you can read more about in the Python Library Reference
 (datetime.tzinfo).
 .
 This package contains the Python 3 version of the library.
Homepage: https://pypi.python.org/pypi/pytz/
Original-Maintainer: Debian  Python Team <team+python@tracker.debian.org>

Package: python3-update-manager
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 261
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: update-manager
Version: 1:22.04.22
Replaces: update-manager-core (<< 1:0.163)
Depends: python3:any (>= 3.2~), python3-apt (>= 0.8.5~), python3-distro-info, python3-distupgrade, lsb-release
Suggests: python3-launchpadlib
Breaks: python3-distupgrade (<< 1:16.10.10), update-manager-core (<< 1:0.163)
Description: python 3.x module for update-manager
 Python module for update-manager (UpdateManager).
 .
 This package contains the python 3.x version of this module.

Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 450
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-urllib3
Version: 1.26.5-1~exp1ubuntu0.5
Depends: python3:any, python3-six
Recommends: ca-certificates
Suggests: python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: HTTP library with thread-safe connection pooling for Python3
 urllib3 supports features left out of urllib and urllib2 libraries.
 .
   - Re-use the same socket connection for multiple requests (HTTPConnectionPool
     and HTTPSConnectionPool) (with optional client-side certificate
     verification).
   - File posting (encode_multipart_formdata).
   - Built-in redirection and retries (optional).
   - Supports gzip and deflate decoding.
   - Thread-safe and sanity-safe.
   - Small and easy to understand codebase perfect for extending and
     building upon.
 .
 This package contains the Python 3 version of the library.
Homepage: https://urllib3.readthedocs.org
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-virtualenv
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 435
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-virtualenv
Version: 20.13.0+ds-2
Replaces: virtualenv (<< 20.0.10)
Depends: python3-pip (>= 20.1-1~), python3-pip-whl, python3-setuptools-whl, python3-wheel-whl, python3-distlib (>= 0.3.1), python3-filelock, python3-importlib-metadata (>= 3.6) | python3 (>> 3.8), python3-importlib-resources | python3 (>> 3.7), python3-platformdirs (<< 3), python3-platformdirs (>= 2), python3-six, python3:any
Suggests: python2-pip-whl, python2-setuptools-whl, python2-wheel-whl
Breaks: virtualenv (<< 20.0.10)
Description: Python virtual environment creator
 virtualenv is a tool to create isolated Python environments, each invokable
 with its own Python executable.  Each instance can have different sets of
 modules, installable via pip.  Virtual Python instances can also be created
 without root access.
 .
 Since Python 3.3, a subset of it has been integrated into the standard library
 under the venv module (python3-venv in Debian).  The venv module does not
 offer all features of this library, to name just a few more prominent ones:
 .
  * is slower (by not having the app-data seed method),
  * is not as extendable,
  * cannot create virtual environments for arbitrarily installed python
    versions (and automatically discover these),
  * does not have as rich programmatic API (describe virtual environments
    without creating them).
 .
 This is the Python 3 version of the library.  It includes the command line
 script.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://virtualenv.pypa.io/

Package: python3-wadllib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 365
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-wadllib
Version: 1.3.6-1
Depends: python3-lazr.uri, python3-pkg-resources, python3:any
Description: Python 3 library for navigating WADL files
 The Web Application Description Language (WADL) is an XML vocabulary for
 describing the capabilities of HTTP resources. wadllib can be used in
 conjunction with an HTTP library to navigate and manipulate those resources.
 .
 This package provides wadllib for Python 3.x.
Original-Maintainer: Stefano Rivera <stefanor@debian.org>
Homepage: https://launchpad.net/wadllib

Package: python3-websocket
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 199
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: websocket-client
Version: 1.2.3-1
Depends: python3:any
Description: WebSocket client library - Python 3.x
 websocket-client provides a low-level, synchronous API providing WebSocket
 client functionality to Python programs. It conforms to the WebSocket
 specification as standardized by the IETF in RFC 6455.
 .
 WebSocket is a protocol providing full-duplex communication channels over
 TCP, mostly used in Web browsers.
 .
 This package provides the Python 3.x version.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/liris/websocket-client

Package: python3-wheel
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: wheel
Version: 0.37.1-2ubuntu0.22.04.1
Depends: python3-distutils, python3:any
Suggests: python3-setuptools
Description: built-package format for Python
 A wheel is a ZIP-format archive with a specially formatted filename and the
 `.whl` extension.  It is designed to contain all the files for a PEP 376
 compatible install in a way that is very close to the on-disk format.
 .
 The wheel project provides a `bdist_wheel` command for setuptools.  Wheel
 files can be installed with `pip`.
 .
 This is the Python 3 compatible package.
Homepage: https://github.com/pypa/wheel
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-wheel-whl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 48
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: wheel
Version: 0.37.1-2ubuntu0.22.04.1
Replaces: python-pip-whl (<< 21.3.1+dfsg-2~)
Provides: python2-wheel-whl
Breaks: python-pip-whl (<< 21.3.1+dfsg-2~)
Description: built-package format for Python (wheel wheel)
 A wheel is a ZIP-format archive with a specially formatted filename and the
 `.whl` extension.  It is designed to contain all the files for a PEP 376
 compatible install in a way that is very close to the on-disk format.
 .
 This is the support package for the PEP 427 wheel version of the package,
 required for using wheel inside a virtual environment.
Homepage: https://github.com/pypa/wheel
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-yaml
Status: install ok installed
Priority: important
Section: python
Installed-Size: 529
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: pyyaml
Version: 5.4.1-1ubuntu1
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3:any, libc6 (>= 2.14), libyaml-0-2
Breaks: libpython-stdlib (<< 2.7.18), python-minimal (<< 2.7.18), python-yaml (<< 5.3.1-2)
Description: YAML parser and emitter for Python3
 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3.  It can
 parse all examples from the specification. The parsing algorithm is simple
 enough to be a reference for YAML parser implementors. A simple extension API
 is also provided.  The package is built using libyaml for improved speed.
Homepage: https://github.com/yaml/pyyaml
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>

Package: python3-zipp
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 27
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-zipp
Version: 1.0.0-3ubuntu0.1
Depends: python3-more-itertools, python3:any
Description: pathlib-compatible Zipfile object wrapper - Python 3.x
 A backport of the Path object to older versions of Python.
 It's pathlib-compatible interface for zip files using zipfile object inside.
 .
 This package contains Python 3.x module.
Homepage: https://github.com/jaraco/zipp
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: python3-zope.component
Status: install ok installed
Priority: extra
Section: zope
Installed-Size: 334
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: zope.component
Version: 4.3.0-3
Depends: python3-zope.hookable, python3-zope.interface (>= 4.1.0), python3-pkg-resources, python3-zope.event, python3:any
Description: Zope Component Architecture
 The core of the Zope Component Architecture. Together with the zope.interface
 package, it provides facilities for defining, registering and looking up
 components.
 .
 This is the Python 3 version.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://pypi.python.org/pypi/zope.component

Package: python3-zope.event
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 37
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: zope.event
Version: 4.4-3
Depends: python3-pkg-resources, python3:any
Description: Very basic event publishing system
 This package provides a simple event system. It provides an event publishing
 system and a very simple event-dispatching system on which more sophisticated
 event dispatching systems can be built. For example, a type-based event
 dispatching system that builds on zope.event can be found in zope.component.
 .
 This is the Python 3 library.
Original-Maintainer: Daniel Lenharo de Souza <lenharo@debian.org>
Homepage: http://pypi.python.org/pypi/zope.event

Package: python3-zope.hookable
Status: install ok installed
Priority: optional
Section: zope
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: zope.hookable
Version: 5.1.0-1build1
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3-pkg-resources, python3:any, libc6 (>= 2.4)
Conflicts: zope3
Description: Hookable object support
 This package supports the efficient creation
 of "hookable" objects, which are callable objects
 that are meant to be optionally replaced.
 .
 This is the Python 3 version.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: https://github.com/zopefoundation/zope.hookable

Package: python3-zope.interface
Status: install ok installed
Priority: optional
Section: zope
Installed-Size: 961
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: zope.interface
Version: 5.4.0-1build1
Provides: python3-zope, python3.10-zope.interface
Depends: python3 (<< 3.11), python3 (>= 3.10~), python3-pkg-resources, python3:any, libc6 (>= 2.4)
Description: Interfaces for Python3
 This package provides an implementation of object interfaces for Python.
 Interfaces are a mechanism for labeling objects as conforming to a given API
 or contract. So, this package can be considered as implementation of the
 Design By Contract methodology support in Python.
 .
 This is the Python 3 version.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://github.com/zopefoundation/zope.interface

Package: python3.10
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 634
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 3.10.12-1~22.04.13
Depends: python3.10-minimal (= 3.10.12-1~22.04.13), libpython3.10-stdlib (= 3.10.12-1~22.04.13), media-types | mime-support
Suggests: python3.10-venv, python3.10-doc, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.10)
 Python is a high-level, interactive, object-oriented language. Its 3.10 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3.10-dev
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 511
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3.10
Version: 3.10.12-1~22.04.13
Depends: python3.10 (= 3.10.12-1~22.04.13), libpython3.10-dev (= 3.10.12-1~22.04.13), libpython3.10 (= 3.10.12-1~22.04.13)
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.10)
 Header files, a static library and development tools for building
 Python (v3.10) modules, extending the Python interpreter or embedding
 Python (v3.10) in applications.
 .
 Maintainers of Python packages should read README.maintainers.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3.10-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5931
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3.10
Version: 3.10.12-1~22.04.13
Depends: libpython3.10-minimal (= 3.10.12-1~22.04.13), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.35)
Recommends: python3.10
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.10)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python3.10-minimal/README.Debian for a list of the modules
 contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Cnf-Visible-Pkgname: python3.10

Package: rake
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 272
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 13.0.6-2
Depends: ruby:any
Recommends: zip
Description: ruby make-like utility
 Rake is a simple ruby build program with capabilities similar to make.
 .
 Rake has the following features:
   * Rakefiles (rakes version of Makefiles) are completely defined in
     standard Ruby syntax. No XML files to edit. No quirky Makefile
     syntax to worry about (is that a tab or a space?)
   * Users can specify tasks with prerequisites.
   * Rake supports rule patterns to sythesize implicit tasks.
   * Rake is lightweight. It can be distributed with other
     projects as a single file. Projects that depend upon
     rake do not require that rake be installed on target
     systems.
Original-Maintainer: Debian Ruby Team <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/ruby/rake
Ruby-Versions: all

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 80
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 8.1.2-1
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: redis-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 191
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: redis
Version: 5:6.0.16-1ubuntu1.1
Depends: lsb-base (>= 3.2-14), redis-tools (= 5:6.0.16-1ubuntu1.1)
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/default/redis-server 36255dd86b15accc2acd4db7f5e21f05
 /etc/init.d/redis-server 1bfb59d75734b81577d86875778427fd
 /etc/logrotate.d/redis-server f4b38d0bd720dea3edc8b96b8502447d
 /etc/redis/redis.conf 83199d2075f4136ef2b7bc5488150bbe
Description: Persistent key-value database with network interface
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 The dataset is stored entirely in memory and periodically flushed to disk.
Homepage: https://redis.io/
Original-Maintainer: Chris Lamb <lamby@debian.org>

Package: redis-tools
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 4063
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: redis
Version: 5:6.0.16-1ubuntu1.1
Replaces: redis-server (<< 2:2.6.16-1)
Depends: adduser, libatomic1 (>= 4.8), libc6 (>= 2.34), libjemalloc2 (>= 2.1.1), liblua5.1-0, liblzf1 (>= 1.5), libssl3 (>= 3.0.0~~alpha1), libsystemd0, lua-bitop, lua-cjson
Suggests: ruby-redis
Breaks: redis-server (<< 2:2.6.16-1)
Description: Persistent key-value database with network interface (client)
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 This package contains the command line client and other tools.
Homepage: https://redis.io/
Original-Maintainer: Chris Lamb <lamby@debian.org>

Package: rkhunter
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1081
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.4.6-10
Depends: binutils, file, lsof, net-tools, ucf, debconf (>= 0.5) | debconf-2.0, perl:any
Pre-Depends: debconf | debconf-2.0
Recommends: bsd-mailx | mailutils | s-nail | mailx, default-mta | mail-transport-agent, e2fsprogs, iproute2, unhide, unhide.rb, wget | curl
Suggests: liburi-perl, libwww-perl, powermgmt-base
Conffiles:
 /etc/apt/apt.conf.d/90rkhunter 662539eb1caa197e3cb9063186d207f4
 /etc/cron.daily/rkhunter d223d17aa5d6b9c70145ce0c55f75e1b
 /etc/cron.weekly/rkhunter 13da7eccf59ff1011d47bf854cb8334c
 /etc/logcheck/ignore.d.server/rkhunter 6b6f43cfc660f206707930f94bf54a9c
 /etc/logrotate.d/rkhunter c16a2282b8a5f0788678de0a1b2943c9
 /etc/rkhunter.conf 8944b42c39ea946004aeee8ec7f33551
Description: rootkit, backdoor, sniffer and exploit scanner
 Rootkit Hunter scans systems for known and unknown rootkits,
 backdoors, sniffers and exploits.
 .
 It checks for:
  - SHA256 hash changes;
  - files commonly created by rootkits;
  - executables with anomalous file permissions;
  - suspicious strings in kernel modules;
  - hidden files in system directories;
 and can optionally scan within files.
 .
 Using rkhunter alone does not guarantee that a system is not
 compromised. Running additional tests, such as chkrootkit, is
 recommended.
Original-Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Homepage: http://rkhunter.sourceforge.net

Package: rpcsvc-proto
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.2-0ubuntu6
Replaces: libc6-dev (<< 2.32), libc6-dev-bin (<< 2.32)
Depends: libc6 (>= 2.34)
Breaks: libc6-dev (<< 2.32), libc6-dev-bin (<< 2.32)
Description: RPC protocol compiler and definitions
 rpcgen is a tool that generates C code to implement an RPC protocol. The input
 to rpcgen is a language similar to C known as RPC Language (Remote Procedure
 Call Language).
 .
 This package also includes several rpcsvc header files and RPC protocol
 definitions from SunRPC sources that were previously shipped by glibc.
Homepage: https://github.com/thkukuk/rpcsvc-proto
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 795
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.2.7-0ubuntu0.22.04.4
Depends: lsb-base, libacl1 (>= 2.2.23), libc6 (>= 2.34), liblz4-1 (>= 0.0~r130), libpopt0 (>= 1.14), libssl3 (>= 3.0.0~~alpha1), libxxhash0 (>= 0.8.0), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: openssh-client, openssh-server, python3, python3-braceexpand
Conffiles:
 /etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073
 /etc/init.d/rsync 59aa13cd1a70ff254a2991ad0c522ea5
Description: fast, versatile, remote (and local) file-copying tool
 rsync is a fast and versatile file-copying tool which can copy locally
 and to/from a remote host. It offers many options to control its behavior,
 and its remote-update protocol can minimize network traffic to make
 transferring updates between machines fast and efficient.
 .
 It is widely used for backups and mirroring and as an improved copy
 command for everyday use.
 .
 This package provides both the rsync command line tool and optional
 daemon functionality.
Homepage: https://rsync.samba.org/
Original-Maintainer: Paul Slootman <paul@debian.org>

Package: rsyslog
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1750
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 8.2112.0-2ubuntu2.2
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.34), libestr0 (>= 0.1.4), libfastjson4 (>= 0.99.8), libsystemd0 (>= 246), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4), adduser, ucf
Recommends: logrotate
Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-mongodb, rsyslog-doc, rsyslog-openssl | rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp, apparmor (>= 2.8.96~2541-0ubuntu4~)
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
 /etc/apparmor.d/usr.sbin.rsyslogd 648eb046586f8a0d7f2ca87ba836bd14
 /etc/logcheck/ignore.d.server/rsyslog 80e9fc074b97751dd4de99855bb8d0e0
 /etc/logrotate.d/rsyslog 46de15167e065fe1d21b8cd9accc2c48
 /etc/rsyslog.conf 8f03326e3d7284ef50ac6777ef8a4fb8
Description: reliable system and kernel logging daemon
 Rsyslog is a multi-threaded implementation of syslogd (a system utility
 providing support for message logging), with features that include:
  * reliable syslog over TCP, SSL/TLS and RELP
  * on-demand disk buffering
  * email alerting
  * writing to MySQL or PostgreSQL databases (via separate output plugins)
  * permitted sender lists
  * filtering on any part of the syslog message
  * on-the-wire message compression
  * fine-grained output format control
  * failover to backup destinations
  * enterprise-class encrypted syslog relaying
 .
 It is the default syslogd on Debian systems.
Homepage: https://www.rsyslog.com/
Original-Maintainer: Michael Biebl <biebl@debian.org>

Package: rtkit
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 143
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.13-4build2
Depends: adduser, dbus, policykit-1, libc6 (>= 2.34), libcap2 (>= 1:2.10), libdbus-1-3 (>= 1.9.14), libsystemd0
Description: Realtime Policy and Watchdog Daemon
 RealtimeKit is a D-Bus system service that changes the
 scheduling policy of user processes/threads to SCHED_RR
 (i.e. realtime scheduling mode) on request. It is intended to
 be used as a secure mechanism to allow real-time scheduling to
 be used by normal user processes.
Homepage: https://github.com/heftig/rtkit
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>

Package: ruby
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: ruby-defaults
Version: 1:3.0~exp1
Replaces: irb, rdoc, rubygems
Provides: irb, rdoc, rubygems
Depends: ruby3.0, ruby-rubygems
Suggests: ri, ruby-dev
Breaks: ruby-bootsnap (<< 1.4.6-1), ruby-switch (<= 0.1.0)
Conflicts: ruby-activesupport-2.3, ruby-activesupport-3.2
Description: Interpreter of object-oriented scripting language Ruby (default version)
 Ruby is the interpreted scripting language for quick and easy
 object-oriented programming.  It has many features to process text
 files and to do system management tasks (as in perl).  It is simple,
 straight-forward, and extensible.
 .
 This package is a dependency package, which depends on Debian's default Ruby
 version (currently v3.0).
Original-Maintainer: Debian Ruby Team <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Homepage: https://www.ruby-lang.org/

Package: ruby-net-telnet
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.1.1-2
Description: telnet client library
 This package provides a telnet client library to use in Ruby programs. It used
 to be part of the Ruby standard library before Ruby 2.3, and was extracted to
 a standalone package.
Original-Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/ruby/net-telnet
Ruby-Versions: all

Package: ruby-rubygems
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 1164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: rubygems
Version: 3.3.5-2ubuntu1.2
Replaces: ruby (<< 1:2.7+2~)
Depends: ruby:any
Breaks: ruby (<< 1:2.7+2~)
Description: Package management framework for Ruby
 A package (also known as a library) contains a set of functionality that can
 be invoked by a Ruby program, such as reading and parsing an XML file. These
 packages are called 'gems' and RubyGems is a tool to install, create, manage
 and load these packages in your Ruby environment. RubyGems is also a client for
 RubyGems.org, a public repository of Gems that allows you to publish a Gem that
 can be shared and used by other developers.
Homepage: https://rubygems.org
Original-Maintainer: Debian Ruby Team <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Ruby-Versions: all

Package: ruby-webrick
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 239
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.7.0-3ubuntu0.2
Description: HTTP server toolkit in Ruby
 WEBrick is an HTTP server toolkit that can be configured as an HTTPS server, a
 proxy server, and a virtual-host server.
 .
 It used to be provided with the standard library of the Ruby interpreter, and
 has been available only as a standalone gem since ruby3.0.
Homepage: https://github.com/ruby/webrick
Original-Maintainer: Debian Ruby Team <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Ruby-Versions: all

Package: ruby-xmlrpc
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.3.2-1ubuntu0.1
Depends: ruby-webrick
Description: XMLRPC library for Ruby
 XMLRPC is a lightweight protocol that enables remote procedure calls over
 HTTP.  It is defined at http://www.xmlrpc.com.
 .
 This package enables you to create a server that implements remote procedures
 and a client that calls them.  Very little code is required to achieve either
 of these.
Homepage: https://github.com/ruby/xmlrpc
Original-Maintainer: Debian Ruby Team <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Ruby-Versions: all

Package: ruby3.0
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 142
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 3.0.2-7ubuntu2.11
Depends: rubygems-integration (>= 1.17.1~), libc6 (>= 2.34), libruby3.0 (>= 3.0.0~preview1)
Recommends: fonts-lato, libjs-jquery
Description: Interpreter of object-oriented scripting language Ruby
 Ruby is the interpreted scripting language for quick and easy
 object-oriented programming.  It has many features to process text
 files and to do system management tasks (as in perl).  It is simple,
 straight-forward, and extensible.
 .
 In the name of this package, `3.0' indicates the Ruby library compatibility
 version. This package currently provides the `3.0.x' branch of Ruby.
Homepage: https://www.ruby-lang.org/
Original-Maintainer: Debian Ruby Team <pkg-ruby-extras-maintainers@lists.alioth.debian.org>

Package: rubygems-integration
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 26
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.18
Depends: ca-certificates
Suggests: bundler
Breaks: ruby2.5
Description: integration of Debian Ruby packages with Rubygems
 rubygems-integration makes Debian Ruby packages recognizable by Rubygems.
 Debian Ruby packages may be used to satisfy Rubygems dependencies both with
 plain Rubygems and with Bundler. This also allows one to use Debian Ruby
 packages to satisfy dependencies in Rails 3 applications.
Original-Maintainer: Debian Ruby Team <pkg-ruby-extras-maintainers@lists.alioth.debian.org>

Package: runc
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 33790
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: runc-app
Version: 1.3.3-0ubuntu1~22.04.3
Depends: libc6 (>= 2.34), libseccomp2 (>= 2.5.0)
Description: Open Container Project - runtime
 "runc" is a command line client for running applications packaged according
 to the Open Container Format (OCF) and is a compliant implementation of
 the Open Container Project specification.
Built-Using: golang-1.23 (= 1.23.1-1~22.04.2)
Homepage: https://github.com/opencontainers/runc

Package: screen
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 1005
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.9.0-1
Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libtinfo6 (>= 6), libutempter0 (>= 1.1.5)
Suggests: byobu | screenie | iselect (>= 1.4.0-1), ncurses-term
Conffiles:
 /etc/init.d/screen-cleanup 44ec7824f5ef10df73e92ad064331ea0
 /etc/screenrc 12c245238eb8b653625bba27dc81df6a
Description: terminal multiplexer with VT100/ANSI terminal emulation
 GNU Screen is a terminal multiplexer that runs several separate "screens" on
 a single physical character-based terminal. Each virtual terminal emulates a
 DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Screen sessions
 can be detached and resumed later on a different terminal.
 .
 Screen also supports a whole slew of other features, including configurable
 input and output translation, serial port support, configurable logging,
 and multi-user support.
Original-Maintainer: Axel Beckert <abe@debian.org>
Homepage: https://savannah.gnu.org/projects/screen

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.8-1ubuntu2
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: https://www.gnu.org/software/sed/
Original-Maintainer: Clint Adams <clint@debian.org>

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 59
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.0.17
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: session-migration
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 50
Maintainer: Didier Roche <didrocks@ubuntu.com>
Architecture: amd64
Version: 0.3.6
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.51.1), init-system-helpers (>= 1.52)
Description: Tool to migrate in user session settings
 This tool is used to migrate in session user data when a program is evolving
 its configuration, or needing to have files moved and so on.
 .
 This program is generally autostarted at the very beginning of the session
 and integrates caching capability.
Homepage: https://launchpad.net/session-migration

Package: sgml-base
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 70
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.30
Pre-Depends: dpkg (>= 1.16.4)
Suggests: sgml-base-doc
Description: SGML infrastructure and SGML catalog file support
 This package creates the SGML infrastructure directories and provides
 SGML catalog file support in compliance with the current Debian SGML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/sgml
      - /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet}
      - /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet}
 .
   * update-catalog(8): tool for maintaining the root SGML catalog
     file and the package SGML catalog files in the '/etc/sgml' directory.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: sgml-data
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 1354
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.0.11+nmu1
Replaces: docbook-xml (<= 3.1.3.6-1), sp (<< 1.3.4-1.2.1-14)
Depends: perl:any, sgml-base (>= 1.28), xml-core (>= 0.14)
Suggests: perlsgml, w3-recs, opensp, libxml2-utils
Breaks: sp (<= 1.1.1-2)
Conffiles:
 /etc/sgml/sgml-data.cat ad9884dac68f6b115523e826f5c9f2b9
Description: common SGML and XML data
 This package contains basic XML and SGML data shared and used by
 multiple packages.  The package provides the technical format
 (Document Type Definition, or DTD) of all major versions of HTML.  It
 also includes standard character entity definitions which describe
 spacial characters or international characters, as well as other
 standard miscellany used by other SGML and XML packages.
 .
 This package implements the Debian XML and SGML standards for entity
 placement and registration.  This benefits the user by making the
 included materials instantly available to people writing, editing or
 building documentation without any further effort.
Original-Maintainer: Debian XML SGML Team <debian-sgml@lists.debian.org>

Package: shared-mime-info
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 2744
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.1-2
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.35.9), libxml2 (>= 2.7.4)
Description: FreeDesktop.org shared MIME database and spec
 This is the shared MIME-info database from the X Desktop Group. It is required
 by any program complying to the Shared MIME-Info Database spec, which is also
 included in this package.
 .
 At this time at least ROX, GNOME, KDE and Xfce use this database.
Original-Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Homepage: https://freedesktop.org/wiki/Software/shared-mime-info

Package: siege
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 263
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.0.7-1build3
Replaces: siege-ssl
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1), zlib1g (>= 1:1.1.4)
Conflicts: siege-ssl
Conffiles:
 /etc/siege/siegerc da7ccdf72dc9907a75ab0f0084574a37
 /etc/siege/urls.txt fb778297a8e612868e41225cf4db7c9d
Description: HTTP regression testing and benchmarking utility
 Siege is an regression test and benchmark utility. It can stress test a single
 URL with a user defined number of simulated users, or it can read many URLs
 into memory and stress them simultaneously. The program reports the total
 number of hits recorded, bytes transferred, response time, concurrency, and
 return status. Siege supports HTTP/1.0 and 1.1 protocols, the GET and POST
 directives, cookies, transaction logging, and basic authentication. Its
 features are configurable on a per user basis.
 .
 Note: this package contains siege with HTTPS support turned on, thus it
 obsoletes siege-ssl package now.
Homepage: http://www.joedog.org/JoeDog/Siege
Original-Maintainer: Josue Abarca <jmaslibre@debian.org>

Package: snmp
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 685
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: net-snmp
Version: 5.9.1+dfsg-1ubuntu2.9
Depends: libc6 (>= 2.34), libsnmp40 (= 5.9.1+dfsg-1ubuntu2.9), libssl3 (>= 3.0.0~~alpha1), libsnmp-base (>= 5.7.3+dfsg-5)
Recommends: perl
Description: SNMP (Simple Network Management Protocol) applications
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.
 .
 The Net-SNMP applications are a collection of command line clients
 for issuing SNMP requests to agents.
Homepage: http://net-snmp.sourceforge.net/
Original-Maintainer: Debian SNMP Team <team+snmp@tracker.debian.org>

Package: snmpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 151
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: net-snmp
Version: 5.9.1+dfsg-1ubuntu2.9
Replaces: libsnmp-dev (<< 5.8+dfsg-3)
Depends: libc6 (>= 2.34), libsnmp40 (= 5.9.1+dfsg-1ubuntu2.9), debconf (>= 0.5) | debconf-2.0, adduser, debconf, lsb-base (>= 3.2-13), libsnmp-base
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: procps
Suggests: snmptrapd
Breaks: libsnmp-dev (<< 5.8+dfsg-3)
Conffiles:
 /etc/default/snmpd aa1e103d71ace197ac267dc4472d5f39
 /etc/init.d/snmpd 1956ed26e1d7d91f43df1d7ec488937e
 /etc/snmp/snmpd.conf 8ac5322c8722f16c16867c908ddda41e
Description: SNMP (Simple Network Management Protocol) agents
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.
 .
 The Net-SNMP agent is a daemon which listens for incoming SNMP
 requests from clients and provides responses.
Homepage: http://net-snmp.sourceforge.net/
Original-Maintainer: Debian SNMP Team <team+snmp@tracker.debian.org>

Package: socat
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1349
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.7.4.1-3ubuntu4
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.0~~alpha1), libwrap0 (>= 7.6-4~)
Description: multipurpose relay for bidirectional data transfer
 Socat (for SOcket CAT) establishes two bidirectional byte streams
 and transfers data between them. Data channels may be files, pipes,
 devices (terminal or modem, etc.), or sockets (Unix, IPv4, IPv6, raw,
 UDP, TCP, SSL). It provides forking, logging and tracing, different
 modes for interprocess communication and many more options.
 .
 It can be used, for example, as a TCP relay (one-shot or daemon),
 as an external socksifier, as a shell interface to Unix sockets,
 as an IPv6 relay, as a netcat and rinetd replacement, to redirect
 TCP-oriented programs to a serial line, or to establish a relatively
 secure environment (su and chroot) for running client or server shell
 scripts inside network connections. Socat supports sctp as of 1.7.0.
Homepage: http://www.dest-unreach.org/socat/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: software-properties-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 220
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: software-properties
Version: 0.99.22.9
Replaces: python-software-properties (<< 0.85), python3-software-properties (<< 0.85)
Depends: ca-certificates, gir1.2-glib-2.0, gir1.2-packagekitglib-1.0 (>= 1.1.0-2), packagekit, python-apt-common (>= 0.9), python3, python3-dbus, python3-gi, python3-software-properties (= 0.99.22.9), python3:any
Breaks: python-software-properties (<< 0.85), python3-software-properties (<< 0.85)
Conffiles:
 /etc/dbus-1/system.d/com.ubuntu.SoftwareProperties.conf cc3c01a5b5e8e05d40c9c075f44c43ea
Description: manage the repositories that you install software from (common)
 This software provides an abstraction of the used apt repositories.
 It allows you to easily manage your distribution and independent software
 vendor software sources.
 .
 This package contains the common files for software-properties like the
 D-Bus backend.

Package: sound-theme-freedesktop
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 537
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.8-2ubuntu1
Description: freedesktop.org sound theme
 The default freedesktop.org sound theme following the XDG theming
 specification. It contains a full set of sounds for different
 desktop events.
 .
 These sounds come from various sources: KDE, Ekiga, Pidgin/Purple, ALSA.
Homepage: https://www.freedesktop.org/wiki/Specifications/sound-theme-spec/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: sqlite3
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 1830
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.37.2-2ubuntu0.5
Depends: libc6 (>= 2.34), libreadline8 (>= 6.0), zlib1g (>= 1:1.2.0), libsqlite3-0 (= 3.37.2-2ubuntu0.5)
Suggests: sqlite3-doc
Description: Command line interface for SQLite 3
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: https://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: ssh-import-id
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 5.11-0ubuntu1
Depends: ca-certificates, openssh-client, python3-distro, wget, python3:any
Recommends: openssh-server
Conffiles:
 /etc/ssh/ssh_import_id 8bfa390040fbeeae70bec14f2dccaf11
Description: securely retrieve an SSH public key and install it locally
 This utility will securely contact a public keyserver (Launchpad.net by
 default, but Github.com is also supported), retrieve one or more user's
 public keys, and append these to the current user's ~/.ssh/authorized_keys
 file.
Homepage: http://launchpad.net/ssh-import-id
Original-Maintainer: Andrew Starr-Bochicchio <asb@debian.org>

Package: ssl-cert
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.1.2
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Description: simple debconf wrapper for OpenSSL
 This package enables unattended installs of packages that
 need to create SSL certificates.
 .
 It is a simple wrapper for OpenSSL's certificate request utility that
 feeds it with the correct user variables.
Original-Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>

Package: strace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2000
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 5.16-0ubuntu3
Depends: libc6 (>= 2.34), libunwind8
Description: System call tracer
 strace is a system call tracer: i.e. a debugging tool which prints out
 a trace of all the system calls made by another process/program.
 The program to be traced need not be recompiled for this, so you can
 use it on binaries for which you don't have source.
 .
 System calls and signals are events that happen at the user/kernel
 interface. A close examination of this boundary is very useful for bug
 isolation, sanity checking and attempting to capture race conditions.
Homepage: https://strace.io
Original-Maintainer: Steve McIntyre <93sam@debian.org>

Package: sudo
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 2508
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.9.9-1ubuntu2.5
Replaces: sudo-ldap
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.0.2), libpam-modules, lsb-base
Conflicts: sudo-ldap
Conffiles:
 /etc/pam.d/sudo b3a1b916bf62a2cc3280f7f9b94844ff
 /etc/pam.d/sudo-i ce9740f66cedf7716e26950abfe556fa
 /etc/sudo.conf efb56b1b282fa4cad1b6c0f05137bb08
 /etc/sudo_logsrvd.conf 09ceda2c98f43e0fbb79bed7c82dba45
 /etc/sudoers 791aa979aa5e859f9ba0112a9512158c
 /etc/sudoers.d/README 44c75ff004a18eeefdde4c998914d6d3
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: https://www.sudo.ws/
Original-Maintainer: Sudo Maintainers <sudo@packages.debian.org>

Package: sysstat
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1472
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 12.5.2-2ubuntu0.2
Depends: lsb-base (>= 3.0-6), ucf (>= 2.003), xz-utils, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libsensors5 (>= 1:3.5.0)
Recommends: systemd | cron | cron-daemon
Suggests: isag
Conffiles:
 /etc/cron.d/sysstat 455c3c071b6daabb4e4490828975034c
 /etc/cron.daily/sysstat 200a6578eb7a7da30665b913e2559f61
 /etc/init.d/sysstat d25b89308163baa0f9844757e098dd33
 /etc/sysstat/sysstat 6c424252786467d54de68358bfcc1e29
 /etc/sysstat/sysstat.ioconf a4fca530dc30ba916dd8fd8b0e0fdf9d
Description: system performance tools for Linux
 The sysstat package contains the following system performance tools:
  - sar: collects and reports system activity information;
  - iostat: reports CPU utilization and disk I/O statistics;
  - tapestat: reports statistics for tapes connected to the system;
  - mpstat: reports global and per-processor statistics;
  - pidstat: reports statistics for Linux tasks (processes);
  - sadf: displays data collected by sar in various formats;
  - cifsiostat: reports I/O statistics for CIFS filesystems.
 .
 The statistics reported by sar deal with I/O transfer rates,
 paging activity, process-related activities, interrupts,
 network activity, memory and swap space utilization, CPU
 utilization, kernel activities and TTY statistics, among
 others. Both UP and SMP machines are fully supported.
Homepage: http://pagesperso-orange.fr/sebastien.godard/
Original-Maintainer: Robert Luberda <robert@debian.org>

Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 16296
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 249.11-0ubuntu3.17
Provides: systemd-sysusers (= 249.11-0ubuntu3.17), systemd-tmpfiles (= 249.11-0ubuntu3.17)
Depends: libacl1 (>= 2.2.23), libapparmor1 (>= 2.13), libaudit1 (>= 1:2.2.1), libcrypt1 (>= 1:4.4.0), libcryptsetup12 (>= 2:2.4), libgnutls30 (>= 3.7.2), libgpg-error0 (>= 1.14), libip4tc2 (>= 1.8.3), libkmod2 (>= 5~), liblz4-1 (>= 0.0~r130), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.4.1), libssl3 (>= 3.0.0~~alpha1), libsystemd0 (= 249.11-0ubuntu3.17), util-linux (>= 2.27.1), mount (>= 2.26), adduser
Pre-Depends: libblkid1 (>= 2.24), libc6 (>= 2.34), libcap2 (>= 1:2.24-9~), libgcrypt20 (>= 1.9.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 3.1~), libzstd1 (>= 1.4.0)
Recommends: default-dbus-system-bus | dbus-system-bus, networkd-dispatcher, systemd-timesyncd | time-daemon
Suggests: systemd-container, libfido2-1, libtss2-esys-3.0.2-0, libtss2-mu0, libtss2-rc0, policykit-1
Breaks: resolvconf (<< 1.83~), udev (<< 247~)
Conflicts: consolekit, libpam-ck-connector, systemd-shim
Conffiles:
 /etc/systemd/journald.conf d2187d732ab2911016a4d4017c155dbb
 /etc/systemd/logind.conf 01fce0d0c11426fd7561a6b3bc907ed6
 /etc/systemd/networkd.conf f461eed370e565cbe9890dd6b2c43996
 /etc/systemd/pstore.conf ea1d43113c41edaacb39180d60a50b08
 /etc/systemd/resolved.conf f87758687f627a75dfac54727cf08462
 /etc/systemd/sleep.conf b15f42ea3ac089d0c96067de38268ff6
 /etc/systemd/system.conf edb0a583ef891cdbe4c5611f24907e9c
 /etc/systemd/user.conf e9c22208d3f0f96ef04eb5fbfecf5d2e
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/lib/systemd/systemd or install systemd-sysv in addition.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: systemd-hwe-hwdb
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 20
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: systemd-hwe
Version: 249.11.6
Depends: udev
Description: udev rules for hardware enablement (HWE)
 systemd-hwe-hwdb contains hwdb rules for HWE on Ubuntu,
 which are not yet present in systemd.

Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 249.11-0ubuntu3.17
Replaces: sysvinit-core
Depends: systemd (= 249.11-0ubuntu3.17)
Pre-Depends: systemd
Recommends: libpam-systemd, libnss-systemd
Conflicts: file-rc, systemd-shim, sysvinit-core
Description: system and service manager - SysV links
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: systemd-timesyncd
Status: deinstall ok config-files
Priority: important
Section: admin
Installed-Size: 269
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 249.11-0ubuntu3.12
Config-Version: 249.11-0ubuntu3.12
Replaces: systemd (<< 245.4-2~), time-daemon
Provides: time-daemon
Depends: libc6 (>= 2.34), systemd (= 249.11-0ubuntu3.12), adduser
Breaks: systemd (<< 245.4-2~)
Conflicts: time-daemon
Conffiles:
 /etc/dhcp/dhclient-exit-hooks.d/timesyncd c66e563f4050725592e2da20a4e1bfef
 /etc/systemd/timesyncd.conf 01ca3edea53f3dcc591db0c2f330b538
Description: minimalistic service to synchronize local time with NTP servers
 The package contains the systemd-timesyncd system service that may be used to
 synchronize the local system clock with a remote Network Time Protocol server.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 3.01-1ubuntu1
Depends: lsb-base (>= 11.0.0~), libc6 (>= 2.34)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 init-d-script, fstab-decode, killall5, pidof
Homepage: https://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <debian-init-diversity@chiark.greenend.org.uk>

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 960
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.34+dfsg-1ubuntu0.1.22.04.2
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Homepage: https://www.gnu.org/software/tar/
Original-Maintainer: Janos Lenart <ocsi@debian.org>

Package: tasksel
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 264
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.68ubuntu2
Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, apt, tasksel-data, perl-base (>= 5.14.0-1)
Pre-Depends: debconf (>= 1.5.34) | cdebconf (>= 0.106)
Conflicts: base-config (<< 2.32), debconf (<< 1.4.27)
Description: tool for selecting tasks for installation on Debian systems
 This package provides 'tasksel', a simple interface for users who
 want to configure their system to perform a specific task.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: tasksel-data
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: tasksel
Version: 3.68ubuntu2
Depends: tasksel (= 3.68ubuntu2)
Recommends: laptop-detect
Conflicts: tasksel (<< 2.67)
Description: official tasks used for installation of Debian systems
 This package contains data about the standard tasks available on a Debian
 system.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1374
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.99.1-3ubuntu0.2
Replaces: apparmor-profiles-extra (<< 1.12~)
Depends: adduser, libc6 (>= 2.34), libpcap0.8 (>= 1.9.0), libssl3 (>= 3.0.0~~alpha1)
Suggests: apparmor (>= 2.3)
Breaks: apparmor-profiles-extra (<< 1.12~)
Conffiles:
 /etc/apparmor.d/usr.bin.tcpdump e6c5b5c0c144de30d497c7843b69ad81
Description: command-line network traffic analyzer
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect attacks
 or to monitor network activities.
Homepage: https://www.tcpdump.org/
Original-Maintainer: Romain Francoise <rfrancoise@debian.org>

Package: telnet
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 154
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: netkit-telnet
Version: 0.17-44build1
Replaces: netstd
Provides: telnet-client
Depends: libc6 (>= 2.34), libstdc++6 (>= 5), netbase
Description: basic telnet client
 The telnet command is used for interactive communication with another host
 using the TELNET protocol.
 .
 For the purpose of remote login, the present client executable should be
 depreciated in favour of an ssh-client, or in some cases with variants like
 telnet-ssl or Kerberized TELNET clients.  The most important reason is that
 this implementation exchanges user name and password in clear text.
 .
 On the other hand, the present program does satisfy common use cases of
 network diagnostics, like protocol testing of SMTP services, so it can
 become handy enough.
Homepage: http://www.hcs.harvard.edu/~dholland/computers/netkit.html
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: thin-provisioning-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1421
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.9.0-2ubuntu1
Depends: libaio1 (>= 0.3.93), libc6 (>= 2.34), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: Tools for handling thinly provisioned device-mapper meta-data
 This package contains tools to handle meta-data from the device-mapper
 thin target.  This target allows the use of a single backing store for multiple
 thinly provisioned volumes.  Numerous snapshots can be taken from such
 volumes.  The tools can check the meta-data for consistency, repair damaged
 information and dump or restore the meta-data in textual form.
Original-Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>

Package: time
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 126
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.9-0.1build2
Depends: libc6 (>= 2.34)
Description: GNU time program for measuring CPU resource usage
 The 'time' command runs another program, then displays information
 about the resources used by that program, collected by the system while
 the program was running.  You can select which information is reported
 and the format in which it is shown, or have 'time' save the information
 in a file instead of display it on the screen.
 .
 The resources that 'time' can report on fall into the general
 categories of time, memory, I/O, and IPC calls.
 .
 The GNU version can format the output in arbitrary ways by using a
 printf-style format string to include various resource measurements.
Homepage: https://www.gnu.org/software/time
Original-Maintainer: Bob Proulx <bob@proulx.com>

Package: tnftp
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 231
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 20210827-4build1
Replaces: lukemftp
Provides: ftp
Depends: libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libssl3 (>= 3.0.0~~alpha1)
Conflicts: lukemftp
Description: enhanced ftp client
 tnftp is what many users affectionately call the enhanced ftp
 client in NetBSD (http://www.netbsd.org).
 .
 This package is a `port' of the NetBSD ftp client to other systems.
 .
 The enhancements over the standard ftp client in 4.4BSD include:
    * command-line editing within ftp
    * command-line fetching of URLS, including support for:
        - http proxies (c.f: $http_proxy, $ftp_proxy)
        - authentication
    * context sensitive command and filename completion
    * dynamic progress bar
    * IPv6 support (from the WIDE project)
    * modification time preservation
    * paging of local and remote files, and of directory listings
      (c.f: `lpage', `page', `pdir')
    * passive mode support, with fallback to active mode
    * `set option' override of ftp environment variables
    * TIS Firewall Toolkit gate ftp proxy support (c.f: `gate')
    * transfer-rate throttling (c.f: `-T', `rate')
Homepage: http://en.wikipedia.org/wiki/Tnftp
Original-Maintainer: xiao sheng wen <atzlinux@sina.com>

Package: tree
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.0.2-1
Depends: libc6 (>= 2.34)
Description: displays an indented directory tree, in color
 Tree is a recursive directory listing command that produces a depth indented
 listing of files, which is colorized ala dircolors if the LS_COLORS environment
 variable is set and output is to tty.
Original-Maintainer: Florian Ernst <florian@debian.org>
Homepage: http://mama.indstate.edu/users/ice/tree/

Package: tzdata
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3912
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2025b-0ubuntu0.22.04.1
Provides: tzdata-bookworm
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: https://www.iana.org/time-zones
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: ubuntu-advantage-tools
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 37.1ubuntu0~22.04
Depends: ubuntu-pro-client (>= 37.1ubuntu0~22.04), debconf (>= 0.5) | debconf-2.0
Description: transitional dummy package for ubuntu-pro-client
 This is a transitional dummy package for ubuntu-pro-client. It can safely be
 removed.
Homepage: https://ubuntu.com/advantage

Package: ubuntu-fan
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 146
Maintainer: Andy Whitcroft <apw@ubuntu.com>
Architecture: all
Version: 0.12.16
Depends: bridge-utils, iproute2 (>> 3.16.0-2ubuntu2~), dnsmasq-base
Recommends: netcat
Conffiles:
 /etc/NetworkManager/conf.d/10-ubuntu-fan.conf 528279319e9a6c0073316f546e7359c9
 /etc/default/ubuntu-fan 146676319ee9030a5f6fa65c82e15d4e
 /etc/dnsmasq.d/ubuntu-fan 60346e349fb2068d1b1d2ff61f38c6b8
 /etc/init.d/ubuntu-fan d20e2f53de8c593c0b3b9438cb981371
 /etc/init/ubuntu-fan.conf e218230b33f05d4be75dea99ab0b19f4
 /etc/network/if-down.d/ubuntu-fan ce206ba4302d50169a2a3122281d37c5
 /etc/network/if-post-down.d/ubuntu-fan ce206ba4302d50169a2a3122281d37c5
 /etc/network/if-up.d/ubuntu-fan ce206ba4302d50169a2a3122281d37c5
Description: Ubuntu FAN network support enablement
 Install this package to enable the Ubuntu FAN network support.
 .
 FAN is an IP over IP tunnel protocol which does network range remapping.
 .
 This package contains the init scripts and example configuration
 for Ubuntu FAN.

Package: ubuntu-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 41
Maintainer: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Architecture: all
Multi-Arch: foreign
Version: 2021.03.26
Replaces: ubuntu-cloudimage-keyring (<< 2018.02.05)
Breaks: ubuntu-cloudimage-keyring (<< 2018.02.05)
Description: GnuPG keys of the Ubuntu archive
 The Ubuntu project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: ubuntu-minimal
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-meta
Version: 1.481.4
Depends: adduser, apt, apt-utils, console-setup, debconf, debconf-i18n, e2fsprogs, eject, init, iproute2, iputils-ping, isc-dhcp-client, kbd, kmod, less, locales, lsb-release, mawk, mount, netbase, netcat-openbsd, netplan.io, passwd, procps, python3, sensible-utils, sudo, tzdata, ubuntu-advantage-tools, ubuntu-keyring, udev, vim-tiny, whiptail
Recommends: rsyslog, usrmerge
Description: Minimal core of Ubuntu
 This package depends on all of the packages in the Ubuntu minimal system,
 that is a functional command-line system with the following capabilities:
 .
  - Boot
  - Detect hardware
  - Connect to a network
  - Install packages
  - Perform basic diagnostics
 .
 It is also used to help ensure proper upgrades, so it is recommended that
 it not be removed.

Package: ubuntu-mono
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 5587
Maintainer: Ubuntu Artwork Team <ubuntu-art@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ubuntu-themes
Version: 20.10-0ubuntu2
Depends: adwaita-icon-theme, hicolor-icon-theme, humanity-icon-theme
Description: Ubuntu Mono Icon theme
 Dark and Light panel icons to make your desktop beautiful.
Homepage: https://launchpad.net/ubuntu-themes

Package: ubuntu-pro-client
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 1374
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-advantage-tools
Version: 37.1ubuntu0~22.04
Replaces: ubuntu-advantage-tools (<< 31~)
Depends: python3-yaml, python3:any, libapt-pkg6.0 (>= 1.9~), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libjson-c5 (>= 0.15), libstdc++6 (>= 11), python3-apt, distro-info (>= 0.18ubuntu0.18.04.1), python3-pkg-resources
Recommends: ubuntu-pro-client-l10n
Breaks: ubuntu-advantage-tools (<< 31~)
Conffiles:
 /etc/apparmor.d/ubuntu_pro_apt_news fc4246c45c221d8de8d878d444aeeb64
 /etc/apparmor.d/ubuntu_pro_esm_cache 2500455e62cf17e89f8eff0e78cfbfdd
 /etc/apt/apt.conf.d/20apt-esm-hook.conf ed4125e83866ccfb557850b08042b4b1
 /etc/apt/preferences.d/ubuntu-pro-esm-apps 7e0d0e65835c9eda745c4a6d81e996e3
 /etc/apt/preferences.d/ubuntu-pro-esm-infra 4932ac7913fff2dadd94b9e832f636c8
 /etc/logrotate.d/ubuntu-pro-client 852ec664fd0f1ecb26e726f5e801e9fd
 /etc/ubuntu-advantage/uaclient.conf f84a9c135c3d556856f9ab6d2751e365
 /etc/update-manager/release-upgrades.d/ubuntu-advantage-upgrades.cfg 5e14da4979c6c68cef22c0c09f5d8793
 /etc/update-motd.d/91-contract-ua-esm-status 6346b049bc070e0519c621de0f636bb5
Description: Management tools for Ubuntu Pro
 Ubuntu Pro is a suite of additional services provided by Canonical on
 top of Ubuntu. Whether you're an enterprise customer deploying systems
 at scale or want security patching for your personal Ubuntu LTS
 at home, the Ubuntu Pro Client (pro) is the command-line tool that
 will help you manage the services you need.
Homepage: https://canonical-ubuntu-pro-client.readthedocs-hosted.com/

Package: ubuntu-pro-client-l10n
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-advantage-tools
Version: 37.1ubuntu0~22.04
Depends: ubuntu-pro-client (= 37.1ubuntu0~22.04)
Description: Translations for Ubuntu Pro Client
 This package delivers translations of Ubuntu Pro Client for various
 languages.
Homepage: https://ubuntu.com/advantage

Package: ubuntu-release-upgrader-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:22.04.20
Replaces: update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Depends: python3:any, python3-distupgrade (= 1:22.04.20), ca-certificates
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: software-properties (<< 0.9.27), update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Conffiles:
 /etc/update-manager/meta-release 25ba16c3215bff43f0272d3d93103f15
 /etc/update-manager/release-upgrades 54fd85e86c6bc2db8d7cc3c18013e3aa
 /etc/update-motd.d/91-release-upgrade 6147b099ff496ef5949d94451791bc4b
Description: manage release upgrades
 This is the core of the Ubuntu Release Upgrader

Package: ubuntu-standard
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 53
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: ubuntu-meta
Version: 1.481.4
Depends: bind9-dnsutils, busybox-static, cpio, cron, dmidecode, dosfstools, ed, file, ftp, hdparm, info, libpam-systemd, logrotate, lshw, lsof, man-db, media-types, nftables, parted, pciutils, psmisc, rsync, strace, time, usbutils, wget, xz-utils
Recommends: apparmor, bash-completion, command-not-found, friendly-recovery, iptables, iputils-tracepath, irqbalance, manpages, mtr-tiny, nano, ntfs-3g, openssh-client, plymouth, plymouth-theme-ubuntu-text, tcpdump, telnet, ufw, update-manager-core, uuid-runtime
Description: The Ubuntu standard system
 This package depends on all of the packages in the Ubuntu standard system.
 This set of packages provides a comfortable command-line Unix-like
 environment.
 .
 It is also used to help ensure proper upgrades, so it is recommended that
 it not be removed.

Package: ucf
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.0043
Depends: debconf (>= 1.5.19), coreutils (>= 5.91), sensible-utils
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 9501
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 249.11-0ubuntu3.17
Depends: libacl1 (>= 2.2.23), libblkid1 (>= 2.37.2), libc6 (>= 2.34), libcap2 (>= 1:2.24-9~), libkmod2 (>= 5~), libselinux1 (>= 3.1~), adduser, libudev1 (= 249.11-0ubuntu3.17), util-linux (>= 2.27.1)
Recommends: systemd-hwe-hwdb
Breaks: systemd (<< 249.11-0ubuntu3.17)
Conflicts: hal
Conffiles:
 /etc/init.d/udev e9424814d107af7d8f58a22b1011810a
 /etc/udev/udev.conf bf60be80a4cc51271a1618edf5a6d66f
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: ufw
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 830
Maintainer: Jamie Strandboge <jdstrand@ubuntu.com>
Architecture: all
Version: 0.36.1-4ubuntu0.1
Depends: iptables, lsb-base (>= 3.0-6), ucf, python3:any, debconf (>= 0.5) | debconf-2.0
Suggests: rsyslog
Conffiles:
 /etc/default/ufw a921dd9d167380b04de4bc911915ea44
 /etc/init.d/ufw 4156943ab8a824fcf4b04cc1362eb230
 /etc/logrotate.d/ufw 969308e0ddfb74505f0da47b49ada218
 /etc/rsyslog.d/20-ufw.conf 98e2f72c9c65ca8d6299886b524e80d1
 /etc/ufw/sysctl.conf 7723079fc108eda8f57eddab3079c70a
Description: program for managing a Netfilter firewall
 The Uncomplicated FireWall is a front-end for iptables, to make managing a
 Netfilter firewall easier. It provides a command line interface with syntax
 similar to OpenBSD's Packet Filter. It is particularly well-suited as a
 host-based firewall.
Homepage: https://launchpad.net/ufw

Package: unattended-upgrades
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 436
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.8ubuntu1
Depends: debconf (>= 0.5) | debconf-2.0, debconf, python3, python3-apt (>= 1.9.6~), python3-dbus, python3-distro-info, ucf, lsb-release, lsb-base, xz-utils
Recommends: systemd-sysv | cron | cron-daemon | anacron
Suggests: bsd-mailx, default-mta | mail-transport-agent, needrestart, powermgmt-base, python3-gi
Conffiles:
 /etc/init.d/unattended-upgrades 290829a5efc55b7c435de0bb769f217b
 /etc/kernel/postinst.d/unattended-upgrades f296826482cb797aeef13554e093dbca
 /etc/logrotate.d/unattended-upgrades e45049ee847f069a99e3e6ec39155d4a
 /etc/pm/sleep.d/10_unattended-upgrades-hibernate 0f5d54aa2dd322c805c90e409fc2724a
 /etc/update-motd.d/92-unattended-upgrades afa7546d3fe561e1f5783f7b9cf72096
Description: automatic installation of security upgrades
 This package can download and install security upgrades automatically
 and unattended, taking care to only install packages from the
 configured APT source, and checking for dpkg prompts about
 configuration file changes.
 .
 This script is the backend for the APT::Periodic::Unattended-Upgrade
 option.
Original-Maintainer: Michael Vogt <mvo@debian.org>

Package: unhide
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 20130526-4ubuntu1
Depends: libc6 (>= 2.14)
Suggests: rkhunter
Description: Forensic tool to find hidden processes and ports
 Unhide is a forensic tool to find processes and TCP/UDP ports hidden by
 rootkits, Linux kernel modules or by other techniques. It includes two
 utilities: unhide and unhide-tcp.
 .
 unhide detects hidden processes using the following six techniques:
   * Compare /proc vs /bin/ps output
   * Compare info gathered from /bin/ps with info gathered by walking thru the
     procfs.
   * Compare info gathered from /bin/ps with info gathered from syscalls
     (syscall scanning).
   * Full PIDs space occupation (PIDs bruteforcing)
   * Reverse search, verify that all thread seen by ps are also seen by the
     kernel (/bin/ps output vs /proc, procfs walking and syscall)
   * Quick compare /proc, procfs walking and syscall vs /bin/ps output
 .
 unhide-tcp identifies TCP/UDP ports that are listening but are not listed in
 /bin/netstat through brute forcing of all TCP/UDP ports available.
 .
 This package can be used by rkhunter in its daily scans.
 .
 This package is useful for network security checks, in addition to forensics
 investigations.
Homepage: http://www.unhide-forensics.info
Original-Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>

Package: unhide.rb
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 22-6
Depends: ruby:any, procps
Suggests: rkhunter
Description: Forensics tool to find processes hidden by rootkits
 Unhide.rb is a forensics tool to find processes hidden by rootkits.
 .
 It looks for active processes in many different ways. Processes found by
 some means but not others are considered to be "hidden", and are reported
 to the user.
 .
 Unhide.rb is a tentative of rewrite in Ruby of the original Unhide, which
 is written in C. While being much faster, it does not implement all the
 diagnostics of the original version. It is also less secure as it cannot
 be statically compiled.
 .
 This package can be used by rkhunter in its daily scans.
Original-Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Homepage: https://launchpad.net/unhide.rb

Package: unzip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 377
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 6.0-26ubuntu3.2
Depends: libbz2-1.0, libc6 (>= 2.34)
Suggests: zip
Description: De-archiver for .zip files
 InfoZIP's unzip program. With the exception of multi-volume archives
 (ie, .ZIP files that are split across several disks using PKZIP's /& option),
 this can handle any file produced either by PKZIP, or the corresponding
 InfoZIP zip program.
 .
 This version supports encryption.
Homepage: http://www.info-zip.org/UnZip.html
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: update-manager-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 192
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: update-manager
Version: 1:22.04.22
Replaces: update-manager (<< 1:0.146.2)
Depends: python3:any (>= 3.2~), python3-update-manager (= 1:22.04.22), python3-distro-info, distro-info-data, lsb-release, ubuntu-release-upgrader-core (>= 1:18.04.9), ubuntu-advantage-tools (>= 30~)
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: computer-janitor (<= 1.11-0ubuntu1), update-manager (<< 1:0.146.2)
Description: manage release upgrades
 This is the core of update-manager and the release upgrader

Package: usb.ids
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 715
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2022.04.02-1
Replaces: usbutils (<< 1:008-1)
Breaks: usbutils (<< 1:008-1)
Description: USB ID Repository
 This package contains the usb.ids file, a public repository of all known
 ID's used in USB devices: ID's of vendors, devices, subsystems and device
 classes. It is used in various programs to display full human-readable
 names instead of cryptic numeric codes.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.linux-usb.org/usb-ids.html

Package: usbutils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 325
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:014-1build1
Depends: libc6 (>= 2.34), libudev1 (>= 196), libusb-1.0-0 (>= 2:1.0.22)
Breaks: hwdata (<< 0.334-1~), isenkram (<< 0.45~), kinfocenter (<< 4:5.14.5-2~), libosinfo-1.0-0 (<< 1.8.0-1~), usbip (<< 2.0+5.10.4-1~)
Description: Linux USB utilities
 This package contains the lsusb utility for inspecting the devices
 connected to the USB bus. It shows a graphical representation of the
 devices that are currently plugged in, showing the topology of the
 USB bus. It also displays information on each individual device on
 the bus.
Homepage: https://github.com/gregkh/usbutils
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>

Package: usrmerge
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 200
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 25ubuntu2
Depends: perl-base (>= 5.32.1-3)
Breaks: cruft-ng (<< 0.4.4~), initramfs-tools (<< 0.121~)
Conflicts: acl (<< 2.2.52-3~), arptables (<< 0.0.4+snapshot20181021-1~), coreutils (<< 8.24-1~), cryptsetup (<< 2:1.7.0-1~), davfs2 (<< 1.5.2-1.2~), debianutils (<< 4.5~), ebtables (<< 2.0.10.4+snapshot20181205-1~), elvis-tiny (<< 1.4-24~), kbd (<< 2.0.3-1~), ksh (<< 93u+20120801-3.1~), less (<< 481-2~), libbrlapi-dev (<< 5.3.1-1~), libdm0-dev, libjson-c-dev (<< 0.12.1-1.1~), libpng12-0 (<< 1.2.54-4~), libusb-0.1-4 (<< 2:0.1.12-28~), mksh (<< 52b-1~), molly-guard (<< 0.7.1+exp1~), musl-dev (<< 1.1.9-1.1~), nano (<< 2.3.99pre3-1~), open-iscsi (<< 2.0.873+git0.3b4b4500-13~), open-vm-tools (<< 2:10.0.5-3227872-2~), policycoreutils (<< 2.4-4~), safe-rm (<< 0.12-6~), tcsh (<< 6.18.01-4~), vsearch (<< 1.9.5-2~), xfsdump (<< 3.1.6+nmu1~), xfslibs-dev (<< 4.9.0+nmu1~), yp-tools (<< 3.3-5~), zsh (<< 5.2-4~)
Description: Convert the system to the merged /usr directories scheme
 This package will automatically convert the system to the merged
 /usr directory scheme, in which the /{bin,sbin,lib}/ directories are
 symlinked to their counterparts in /usr/.
 .
 There is no automatic method to restore the precedent configuration, so
 there is no going back once this package has been installed.
Homepage: https://wiki.debian.org/UsrMerge
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3395
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.37.2-4ubuntu3.4
Replaces: hardlink
Provides: hardlink
Pre-Depends: libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.37.2), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libcrypt1 (>= 1:4.1.0), libmount1 (>= 2.37.2), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.34), libsystemd0, libtinfo6 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd, util-linux-locales
Conflicts: hardlink
Conffiles:
 /etc/init.d/hwclock.sh c06bc68c12cbdd9c7f60ba25ee587efe
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
 /etc/pam.d/su 60fbbe65c90d741bc0d380543cefe8af
 /etc/pam.d/su-l 756fef5687fecc0d986e5951427b0c4f
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to view kernel
 messages, create new filesystems, view block device information,
 interface with real time clock, etc.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: uuid-runtime
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 201
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.37.2-4ubuntu3.4
Depends: adduser, libc6 (>= 2.34), libsmartcols1 (>= 2.27~rc1), libsystemd0, libuuid1 (>= 2.31.1)
Pre-Depends: libuuid1, init-system-helpers (>= 1.54~)
Conffiles:
 /etc/init.d/uuidd 29b6e6ae2de1365c06806e18f18d8fab
Description: runtime components for the Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
 .
 This package contains the uuidgen program and the uuidd daemon.
 .
 The uuidd daemon is used to generate UUIDs, especially time-based
 UUIDs, in a secure and guaranteed-unique fashion, even in the face of
 large numbers of threads trying to grab UUIDs running on different CPUs.
 It is used by libuuid as well as the uuidgen program.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <util-linux@packages.debian.org>

Package: vim
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 3931
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2:8.2.3995-1ubuntu2.24
Provides: editor
Depends: vim-common (= 2:8.2.3995-1ubuntu2.24), vim-runtime (= 2:8.2.3995-1ubuntu2.24), libacl1 (>= 2.2.23), libc6 (>= 2.34), libgpm2 (>= 1.20.7), libpython3.10 (>= 3.10.0), libselinux1 (>= 3.1~), libsodium23 (>= 1.0.14), libtinfo6 (>= 6)
Suggests: ctags, vim-doc, vim-scripts
Description: Vi IMproved - enhanced vi editor
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains a version of vim compiled with a rather
 standard set of features.  This package does not provide a GUI
 version of Vim.  See the other vim-* packages if you need more
 (or less).
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 382
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:8.2.3995-1ubuntu2.24
Depends: xxd
Recommends: vim | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Conffiles:
 /etc/vim/vimrc e782ef3054004f773d556475cfad5870
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains files shared by all non GUI-enabled vim variants
 available in Debian.  Examples of such shared files are: manpages and
 configuration files.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>

Package: vim-runtime
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 32783
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:8.2.3995-1ubuntu2.24
Recommends: vim | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Breaks: vim-tiny (<< 2:8.2.3995-1ubuntu2.24)
Enhances: vim-tiny
Description: Vi IMproved - Runtime files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains vimtutor and the architecture independent runtime
 files, used, if available, by all vim variants available in Debian.
 Example of such runtime files are: online documentation, rules for
 language-specific syntax highlighting and indentation, color schemes,
 and standard plugins.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>

Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1728
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: vim
Version: 2:8.2.3995-1ubuntu2.24
Provides: editor
Depends: vim-common (= 2:8.2.3995-1ubuntu2.24), libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~), libtinfo6 (>= 6)
Suggests: indent
Conffiles:
 /etc/vim/vimrc.tiny d587d5897899e491dae0f4a7b780642a
Description: Vi IMproved - enhanced vi editor - compact version
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains a minimal version of Vim compiled with no GUI and
 a small subset of features. This package's sole purpose is to provide
 the vi binary for base installations.
 .
 If a vim binary is wanted, try one of the following more featureful
 packages: vim, vim-nox, vim-athena, or vim-gtk3.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>

Package: virtualenv
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 30
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-virtualenv
Version: 20.13.0+ds-2
Depends: python3-virtualenv
Description: Python virtual environment creator (Dependency package)
 The virtualenv utility creates virtual Python instances, each invokable with
 its own Python executable.  Each instance can have different sets of modules,
 installable via pip.  Virtual Python instances can also be created without
 root access.
 .
 This is a dependency package and may be safely removed.
Original-Maintainer: Debian Python Team <team+python@tracker.debian.org>
Homepage: https://virtualenv.pypa.io/

Package: wamerican
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 1004
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: scowl
Version: 2020.12.07-2
Provides: wordlist
Depends: debconf (>= 0.5) | debconf-2.0
Description: American English dictionary words for /usr/share/dict
 This package provides the file /usr/share/dict/american-english
 containing a list of English words with American spellings.
 This list can be used by spelling checkers, and by programs such
 as look(1).
 .
 There are also -small, -large, and -huge versions of this word list,
 and there are wbritish* and wcanadian* packages as well.
Original-Maintainer: Don Armstrong <don@debian.org>
Homepage: http://wordlist.sourceforge.net/

Package: wbritish
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 996
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: scowl
Version: 2020.12.07-2
Provides: wordlist
Depends: dictionaries-common (>= 0.20), debconf (>= 0.5) | debconf-2.0
Description: British English dictionary words for /usr/share/dict
 This package provides the file /usr/share/dict/british-english
 containing a list of English words with British spellings.
 This list can be used by spelling checkers, and by programs such
 as look(1).
 .
 There are also -small, -large, and -huge versions of this word list,
 and there are wamerican* and wcanadian* packages as well.
Original-Maintainer: Don Armstrong <don@debian.org>
Homepage: http://wordlist.sourceforge.net/

Package: wget
Status: install ok installed
Priority: standard
Section: web
Installed-Size: 928
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.21.2-2ubuntu1.1
Depends: libc6 (>= 2.34), libidn2-0 (>= 0.6), libpcre2-8-0 (>= 10.22), libpsl5 (>= 0.16.0), libssl3 (>= 3.0.0~~alpha1), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/
Original-Maintainer: Noël Köthe <noel@debian.org>

Package: whiptail
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 72
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: newt
Version: 0.52.21-5ubuntu2
Depends: libc6 (>= 2.34), libnewt0.52 (>= 0.52.21), libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Description: Displays user-friendly dialog boxes from shell scripts
 Whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.
Homepage: https://pagure.io/newt
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: whois
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 272
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 5.5.13
Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libidn2-0 (>= 2.0.3)
Description: intelligent WHOIS client
 This package provides a commandline client for the WHOIS (RFC 3912)
 protocol, which queries online servers for information such as contact
 details for domains and IP address assignments.
 It can intelligently select the appropriate WHOIS server for most queries.
 .
 The package also contains mkpasswd, a features-rich front end to the
 password encryption function crypt(3).
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: wireless-regdb
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 38
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2025.07.10-0ubuntu1~22.04.1
Conflicts: boot-managed-by-snapd (<< 5~)
Description: wireless regulatory database
 This package contains the wireless regulatory database used by the Central
 Regulatory Database Agent (CRDA) to configure wireless devices to operate
 within the radio spectrum allowed in the local jurisdiction.
 .
 This regulatory information is provided with no warranty either expressed or
 implied. Only Linux drivers which use cfg80211 framework can make use of the
 regulatory database and CRDA.
Homepage: https://wireless.wiki.kernel.org/en/developers/regulatory/wireless-regdb
Original-Maintainer: Seth Forshee <seth@forshee.me>

Package: x11-common
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 311
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xorg
Version: 1:7.7+23ubuntu2
Depends: lsb-base (>= 1.3-9ubuntu2)
Conffiles:
 /etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233
 /etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f
 /etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0
 /etc/X11/Xsession 1ec5f844cc2d850a8d98aed509e3198c
 /etc/X11/Xsession.d/20x11-common_process-args 6957432229b7305a40cb84a7a63edd4e
 /etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c
 /etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd
 /etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040
 /etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d
 /etc/X11/Xsession.d/60x11-common_xdg_path b4d4976a8dfa6ca2123f840fbfee76c7
 /etc/X11/Xsession.d/90x11-common_ssh-agent 71116d351e6eab4ecce9b84229a4ece0
 /etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168
 /etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a
 /etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1
 /etc/init.d/x11-common b121acab13ded0fb7e9bc90ad55c9a43
Description: X Window System (X.Org) infrastructure
 x11-common contains the filesystem infrastructure required for further
 installation of the X Window System in any configuration; it does not
 provide a full installation of clients, servers, libraries, and utilities
 required to run the X Window System.
 .
 A number of terms are used to refer to the X Window System, including "X",
 "X Version 11", "X11", "X11R6", and "X11R7".  The version of X used in
 Debian is derived from the version released by the X.Org Foundation, and
 is thus often also referred to as "X.Org".  All of the preceding quoted
 terms are functionally interchangeable in an Debian system.
Homepage: https://www.x.org/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: x11-utils
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 709
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 7.7+5build2
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.12.6), libfontenc1 (>= 1:1.1.4), libgl1, libx11-6, libx11-xcb1 (>= 2:1.7.2), libxaw7 (>= 2:1.0.14), libxcb-shape0, libxcb1 (>= 1.6), libxcomposite1 (>= 1:0.4.5), libxext6, libxft2 (>> 2.1.1), libxi6, libxinerama1 (>= 2:1.1.4), libxkbfile1 (>= 1:1.1.0), libxmu6 (>= 2:1.1.3), libxmuu1 (>= 2:1.1.3), libxrandr2 (>= 2:1.2.0), libxrender1, libxt6 (>= 1:1.1.0), libxtst6, libxv1, libxxf86dga1, libxxf86vm1
Suggests: mesa-utils
Conffiles:
 /etc/X11/app-defaults/Editres 52c854cc7c64da8bebd2cc12ed598f55
 /etc/X11/app-defaults/Editres-color 5ec5d0e8c953faaa06af647650f30ce6
 /etc/X11/app-defaults/Viewres 4f77da598593ff07cda9d2d147a07772
 /etc/X11/app-defaults/Viewres-color ff9c397a80443790a97b909050f63282
 /etc/X11/app-defaults/XFontSel 183bca665ae87e3943bdb4362d21973d
 /etc/X11/app-defaults/Xfd a8b4d28d2ad895e40cfb6fb9c69eeecd
 /etc/X11/app-defaults/Xmessage eed84b35dde8b18e7dcfc80e75c1da67
 /etc/X11/app-defaults/Xmessage-color ca383db9e4e9648bda0952ad6b8a2115
Description: X11 utilities
 An X client is a program that interfaces with an X server (almost always via
 the X libraries), and thus with some input and output hardware like a
 graphics card, monitor, keyboard, and pointing device (such as a mouse).
 .
 This package provides a miscellaneous assortment of X utilities
 that ship with the X Window System, including:
  - appres, editres, listres and viewres, which query the X resource database;
  - luit, a filter that can be run between an arbitrary application and a
    UTF-8 terminal emulator;
  - xdpyinfo, a display information utility for X;
  - xdriinfo, query configuration information of DRI drivers;
  - xev, an X event displayer;
  - xfd, a tool that displays all the glyphs in a given X font;
  - xfontsel, a tool for browsing and selecting X fonts;
  - xkill, a tool for terminating misbehaving X clients;
  - xlsatoms, which lists interned atoms defined on an X server;
  - xlsclients, which lists client applications running on an X display;
  - xlsfonts, a server font list displayer;
  - xmessage, a tool to display message or dialog boxes;
  - xprop, a property displayer for X;
  - xvinfo, an Xv extension information utility for X;
  - xwininfo, a window information utility for X;
 .
 The editres and viewres programs use bitmap images provided by the
 xbitmaps package. The luit program requires locale information from
 the libx11-data package.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: x11proto-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1680
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xorgproto
Version: 2021.5-1
Replaces: x11proto-core-dev (<< 2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Provides: x11proto-core-dev (= 2021.5-1), x11proto-dri2-dev (= 2021.5-1), x11proto-fonts-dev (= 2021.5-1), x11proto-gl-dev (= 2021.5-1), x11proto-input-dev (= 2021.5-1), x11proto-kb-dev (= 2021.5-1), x11proto-present-dev (= 2021.5-1), x11proto-randr-dev (= 2021.5-1), x11proto-record-dev (= 2021.5-1), x11proto-render-dev (= 2021.5-1), x11proto-scrnsaver-dev (= 2021.5-1), x11proto-video-dev (= 2021.5-1), x11proto-xext-dev (= 2021.5-1), x11proto-xf86dga-dev (= 2021.5-1), x11proto-xf86dri-dev (= 2021.5-1), x11proto-xf86vidmode-dev (= 2021.5-1), x11proto-xinerama-dev (= 2021.5-1)
Depends: xorg-sgml-doctools (>= 1:1.5)
Breaks: x11proto-core-dev (<< 2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Description: X11 extension protocols and auxiliary headers
 This package provides development headers describing the wire protocol
 for the X11 core and extension protocols, and also provides a number of
 utility headers, used to abstract OS-specific functions.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This package is built from the X.org xorgproto module.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://www.x.org/

Package: xauth
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 77
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:1.1-1build2
Depends: libc6 (>= 2.34), libx11-6, libxau6 (>= 1:1.0.9), libxext6, libxmuu1 (>= 2:1.1.3)
Description: X authentication utility
 xauth is a small utility to read and manipulate Xauthority files, which
 are used by servers and clients alike to control authentication and access
 to X sessions.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: xdg-dbus-proxy
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.1.3-1
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.39.4)
Description: filtering D-Bus proxy
 xdg-dbus-proxy is a filtering proxy for D-Bus connections. It was
 originally part of the Flatpak project, but it has been broken out as
 a standalone module to facilitate using it in other contexts, for
 example in WebKit-GTK's optional bubblewrap-based sandbox.
 .
 For this proxy to be useful, restricted D-Bus clients must be denied
 access to the normal D-Bus socket (for example by using containers or
 AppArmor rules), and instead given access to the listening Unix socket
 created by the proxy (typically by bind-mounting it into a Linux
 container).
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: https://github.com/flatpak/xdg-dbus-proxy

Package: xdg-desktop-portal
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.14.4-1ubuntu2~22.04.2
Replaces: flatpak (<< 0.10.4-1~)
Depends: bubblewrap, default-dbus-session-bus | dbus-session-bus, fuse3, init-system-helpers (>= 1.52), libc6 (>= 2.34), libfuse3-3 (>= 3.2.3), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.70.0), libjson-glib-1.0-0 (>= 1.5.2), libpipewire-0.3-0 (>= 0.3.10), libsystemd0
Breaks: flatpak (<< 0.10.4-1~)
Description: desktop integration portal for Flatpak and Snap
 xdg-desktop-portal provides a portal frontend service for Flatpak, Snap,
 and possibly other desktop containment/sandboxing frameworks. This service
 is made available to the sandboxed application, and provides mediated
 D-Bus interfaces for file access, URI opening, printing and similar
 desktop integration features.
 .
 The implementation of these interfaces is expected to require
 user confirmation before responding to the sandboxed application's
 requests. For example, when the sandboxed application ask to open a file,
 the portal implementation will open an "Open" dialog outside the sandbox,
 and will only make the selected file available to the sandboxed app if
 that dialog is confirmed.
 .
 xdg-desktop-portal is designed to be desktop-agnostic, and uses a
 desktop-environment-specific GUI backend such as xdg-desktop-portal-gtk
 to provide its functionality.
Homepage: https://github.com/flatpak/xdg-desktop-portal
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: xdg-desktop-portal-gtk
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 436
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.14.0-1build1
Provides: xdg-desktop-portal-backend (= 1.14.0)
Depends: dbus-user-session | dbus-x11, gsettings-desktop-schemas, xdg-desktop-portal (>= 1.14.0), libc6 (>= 2.34), libfontconfig1 (>= 2.12.6), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.55.1), libgtk-3-0 (>= 3.21.5)
Suggests: accountsservice, evince, xdg-desktop-portal-gnome
Description: GTK+/GNOME portal backend for xdg-desktop-portal
 xdg-desktop-portal-gtk provides a GTK+/GNOME implementation for the
 desktop-agnostic xdg-desktop-portal service. This allows sandboxed
 applications to request services from outside the sandbox using
 GTK+ GUIs (app chooser, file chooser, print dialog) or using GNOME
 services (session manager, screenshot provider).
Homepage: https://flatpak.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: xdg-user-dirs
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 542
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.17-2ubuntu4
Depends: libc6 (>= 2.34)
Conffiles:
 /etc/xdg/autostart/xdg-user-dirs.desktop 284e639a243bfb86fc415ce448e8fa35
 /etc/xdg/user-dirs.conf 602a95ec7fe4068512bebb712c41102d
 /etc/xdg/user-dirs.defaults b8595963fe74aeb65e854ba9da7f1acb
Description: tool to manage well known user directories
 xdg-user-dirs is a tool to help manage "well known" user directories
 like the desktop folder and the music folder. It also handles
 localization (i.e. translation) of the filenames.
 .
 The way it works is that xdg-user-dirs-update is run very early in the
 login phase. This program reads a configuration file, and a set of
 default directories. It then creates localized versions of these
 directories in the users home directory and sets up a config file in
 $(XDG_CONFIG_HOME)/user-dirs.dirs (XDG_CONFIG_HOME defaults to
 ~/.config) that applications can read to find these directories.
Homepage: http://www.freedesktop.org/wiki/Software/xdg-user-dirs
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: xkb-data
Status: install ok installed
Priority: important
Section: x11
Installed-Size: 4236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xkeyboard-config
Version: 2.33-1
Breaks: libx11-6 (<< 2:1.4.3), x11-xkb-utils (<< 7.7+5)
Description: X Keyboard Extension (XKB) configuration data
 This package contains configuration data used by the X Keyboard
 Extension (XKB), which allows selection of keyboard layouts when
 using a graphical interface.
 .
 Every X11 vendor provides its own XKB data files, so keyboard layout
 designers have to send their layouts to several places.  The
 xkeyboard-config project has been launched at FreeDesktop in order
 to provide a central repository that could be used by all vendors.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Homepage: https://www.freedesktop.org/Software/XKeyboardConfig

Package: xml-core
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.18+nmu1
Depends: sed (>= 4.1.2-8), sgml-base (>= 1.28)
Suggests: debhelper (>= 9.20120909)
Conffiles:
 /etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa
Description: XML infrastructure and XML catalog file support
 This package creates the XML infrastructure directories and provides
 XML catalog file support in compliance with the current Debian XML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/xml
      - /usr/share/xml/{declaration,entities,misc,schema}
      - /usr/local/share/xml/{declaration,entities,misc,schema}
 .
   * XML catalog schema: OASIS XML Catalog Committee Specification 1.0
 .
   * update-xmlcatalog(8): tool for maintaining the root XML catalog
     file and the package XML catalog files in the '/etc/xml' directory
     as well as local XML catalog files.
 .
   * dh_installxmlcatalogs(1): debhelper tool for installing local XML
     catalog files and registering XML entities in package XML catalog
     files and the root XML catalog file (requires debhelper package)
Original-Maintainer: Debian XML-SGML group <debian-sgml@lists.debian.org>

Package: xorg-sgml-doctools
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1:1.11-1.1
Description: Common tools for building X.Org SGML documentation
 This package contains tools for building the X.Org SGML documentation.
 Currently it only includes various entity definitions for the current
 release.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: xtrans-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 302
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: xtrans
Version: 1.4.0-1
Description: X transport library (development files)
 xtrans includes a number of routines to make X implementations
 transport-independent; at time of writing, it includes support for UNIX
 sockets, IPv4, IPv6, and DECnet.
 .
 xtrans is not actually a library in itself; it includes .c files which are
 then used in the compilation of X servers, libraries, et al.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://cgit.freedesktop.org/xorg/lib/libxtrans/
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: xxd
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 280
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: vim
Version: 2:8.2.3995-1ubuntu2.24
Replaces: vim-common (<< 2:7.4.2347-1~)
Depends: libc6 (>= 2.34)
Breaks: vim-common (<< 2:7.4.2347-1~)
Description: tool to make (or reverse) a hex dump
 xxd creates a hex dump of a given file or standard input.  It can also convert
 a hex dump back to its original binary form.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>

Package: xz-utils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 372
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.2.5-2ubuntu1
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.34), liblzma5 (>= 5.2.2)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: https://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>

Package: yelp
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 2124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 42.1-1ubuntu0.1
Depends: libatk1.0-0 (>= 1.12.4), libbz2-1.0, libc6 (>= 2.34), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.2.4), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.67.4), libgtk-3-0 (>= 3.13.3), libhandy-1-0 (>= 1.5.0), libharfbuzz0b (>= 0.6.0), libjavascriptcoregtk-4.0-18, liblzma5 (>= 5.1.1alpha+20110809), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libsoup2.4-1 (>= 2.4.0), libsqlite3-0 (>= 3.5.9), libwebkit2gtk-4.0-37 (>= 2.19.2), libxml2 (>= 2.6.27), libxslt1.1 (>= 1.1.25), libyelp0 (= 42.1-1ubuntu0.1), dconf-gsettings-backend | gsettings-backend, python3-distro, yelp-xsl (>= 41~), man-db (>= 2.5.1-1)
Recommends: docbook-xml
Description: Help browser for GNOME
 Yelp is the help browser for the GNOME desktop.  Yelp provides a simple
 graphical interface for viewing DocBook, Mallard, HTML, man, and info
 formatted documentation.
Homepage: https://wiki.gnome.org/Apps/Yelp
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: yelp-xsl
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1437
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 42.0-1ubuntu0.1
Description: XSL stylesheets for the yelp help browser
 Yelp-xsl contains XSL stylesheets that are used by the yelp help browser
 to format DocBook and Mallard documents.
Homepage: https://wiki.gnome.org/Apps/Yelp
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: zip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 531
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0-12build2
Depends: libbz2-1.0, libc6 (>= 2.34)
Recommends: unzip
Description: Archiver for .zip files
 This is InfoZIP's zip program. It produces files that are fully
 compatible with the popular PKZIP program; however, the command line
 options are not identical. In other words, the end result is the same,
 but the methods differ. :-)
 .
 This version supports encryption.
Homepage: http://www.info-zip.org/Zip.html
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.11.dfsg-2ubuntu9.2
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>

Package: zlib1g-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 592
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.11.dfsg-2ubuntu9.2
Provides: libz-dev
Depends: zlib1g (= 1:1.2.11.dfsg-2ubuntu9.2), libc6-dev | libc-dev
Conflicts: zlib1-dev
Description: compression library - development
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the development support
 files.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>

Package: zstd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1655
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: libzstd
Version: 1.4.8+dfsg-3build1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 12), zlib1g (>= 1:1.1.4)
Description: fast lossless compression algorithm -- CLI tool
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the CLI program implementing zstd.
Homepage: https://github.com/facebook/zstd
Original-Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>