Website : rimsha.abasa.com
backdoor
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
bin
/
Filename :
siege.config
back
Copy
#!/bin/sh # SCRIPT: siege.config # AUTHOR: Jeffrey Fulmer <jeff@joedog.org> # DATE: Wed Nov 11 11:13:38 EST 2015 # Moved $HOME/.siegerc to .siege/siege.conf # DATE: Mon May 28 11:40:28 EDT 2001 # Orignal file # SYNOP: This script generates an $HOME/.siegerc # file from the doc/siegerc.in template. # Its contents are added to this script by # configure. The siegerc file template is # maintained once in $(top_srcdir)/doc. rcfile="$HOME/.siegerc" config="$HOME/.siege/siege.conf" if test -f $rcfile; then rm -f $rcfile fi if test -f $config; then echo "siege.config" echo "usage: siege.config [no arguments]" echo "----------------------------------" echo "Resource file already install as $config" echo "Use your favorite editor to change your configuration by" echo "editing the values in that file or remove it and run this" echo "program again." echo "" exit fi cat > $config << '_EOF_' # Updated by Siege %_VERSION%, %_DATE% # Copyright 2000-2016 by %_AUTHOR% # # Siege configuration file -- edit as necessary # For more information about configuring and running this program, # visit: http://www.joedog.org/ # # Variable declarations. You can set variables here for use in the # directives below. Example: # PROXY = proxy.joedog.org # Reference variables inside ${} or $(), example: # proxy-host = ${PROXY} # # # You can also reference ENVIRONMENT variables without actually # declaring them, example: # # logfile = $(HOME)/var/log/siege.log # # Verbose mode: With this feature enabled, siege will print the # result of each transaction to stdout. (Enabled by default) # # ex: verbose = true|false # verbose = true # # Color mode: This option works in conjuction with verbose mode. # It tells siege whether or not it should display its output in # color-coded output. (Enabled by default) # # ex: color = on | off # color = on # # Quiet mode: With this featured enabled, siege goes mostly silent. # It will display the opening message and the final stats but nothing # else. If you enable quiet mode with -g/--get then siege will be # completely silent (ideal for scripting). In order to gauge the # success of the run, you'll have to rely on the exit status: # # #!/bin/sh # # SIEGE=/home/jdfulmer/bin/siege # # $SIEGE -g https://www.joedog.org/ # if [ $? -eq 0 ] ; then # echo "Whoo hoo!" # else # echo "D'oh!" # fi # # This is the same as running siege with -q/--quiet # # Ex: quiet = true # quiet = false # # JSON output - With this feature enabled, siege will print the final stats as # JSON to stdout. It monopolizes stdout, superceding verbose and debug modes. # # The default value is false. # # ex: json_output = true | false # json_output = true # # Show logfile location. By default, siege displays the logfile # location at the end of every run when logging. You can turn this # message off with this directive. # # ex: show-logfile = false # show-logfile = true # # Default logging status, true turns logging on. # ex: logging = true|false # logging = false # # Logfile, the default siege logfile is /var/log/siege.log This # directive allows you to choose an alternative log file. Environment # variables may be used as shown in the examples: # # ex: logfile = /home/jeff/var/log/siege.log # logfile = ${HOME}/var/log/siege.log # logfile = ${LOGFILE} # # logfile = # # Get method: Use this directive to select an HTTP method for siege # when it's run in get mode, i.e., siege -g/--get URL. You may select # GET or HEAD. The default method is HEAD. As expected HEAD prints just # the headers and GET prints the entire page. # # NOTE: This only applies when siege is invoked with -g/--get. All # other requests methods will be made on the basis of the URL. # # example: gmethod = GET # gmethod = HEAD # # Parser # This directive allows you to turn on the html parser. With this # feature enabled, siege will harvest resources like style sheets, # images, javascript, etc. and make additional requests for those # items. # # HTML parsing was added to version 4.0.0 It is enabled by default. # When the parser is enabled, care must be given to other features. # For example, we allow to set accept-encoding to anything you'd like # but if you want to parse those pages, then you MUST set the encoding # to a supported one. # # With the default options set, you should be able to enable the parser # with success. # # Use this feature to enable it. (true = on, false = off) # # Example: parser = true # parser = true # # No-follow # When the parser is enabled, siege will grab HTML resources within # the page and download those elements as well. This directive allows # you to specify hostnames to which you do NOT want to make requests. # # You can repeat this directive as many times as you like. Enter one # per line with 'key = value' syntax. # # Example: nofollow = www.joedog.org # nofollow = ad.doubleclick.net nofollow = pagead2.googlesyndication.com nofollow = ads.pubsqrd.com nofollow = ib.adnxs.com # # CSV Verbose format: with this option, you can choose to format # verbose output in traditional siege format or comma separated # format. The latter will allow you to redirect output to a file # for import into a spread sheet, i.e., siege > file.csv # # ex: csv = true|false (default false) # # csv = true # # Timestamp format: with this option, you can choose to print a # timestamp each line of output. # # example: timestamp = true|false (default false) # # [Sat, 2010-11-20 10:39:13] HTTP/1.1 200 0.12 secs: 4003 bytes ==> / # # timestamp = true # # Full URL verbose format: By default siege displays the URL path and # not the full URL. With this option, you can instruct siege to show # the complete URL. # # ex: fullurl = true|false (default false) # # HTTP/1.1 301 0.34 secs: 311 bytes ==> GET https://www.joedog.org/ # # fullurl = true # # Display id: in verbose mode, display the siege user id associated # with the HTTP transaction information # # ex: display-id = true|false # # 100) HTTP/1.1 200 0.31 secs: 35338 bytes ==> GET /images/bbc.jpg # # display-id = # # Limit: This directive places a cap on the number of threads siege # will generate. The default value is 255 which corresponds with # apache's default value. If you schedule more clients than apache is # configured to handle, then requests will back up and you will make a # mess. DO NOT INCREASE THIS NUMBER UNLESS YOU CONFIGURED APACHE TO # HANDLE MORE THAN 256 SIMULTANEOUS REQUESTS. # # ex: limit = 1023 (default is 255) # limit = 255 # # HTTP protocol. Options HTTP/1.1 and HTTP/1.0. Some webservers have # broken implementation of the 1.1 protocol which skews throughput # evaluations. If you notice some siege clients hanging for extended # periods of time, change this to HTTP/1.0 # # ex: protocol = HTTP/1.1 # protocol = HTTP/1.0 # protocol = HTTP/1.1 # # Chunked encoding is required by HTTP/1.1 protocol but siege allows # you to turn it off as desired. This feature is generally more useful # to siege developers than siege users. You should probably leave it # set to 'true' # # ex: chunked = true # chunked = true # # Cache revalidation. Siege supports cache revalidation for both ETag # and Last-modified headers. If a copy is still fresh, the server # responds with 304. While this feature is required for HTTP/1.1, it # may not be welcomed for load testing. We allow you to breach the # protocol and turn off caching # # HTTP/1.1 200 0.00 secs: 2326 bytes ==> /apache_pb.gif # HTTP/1.1 304 0.00 secs: 0 bytes ==> /apache_pb.gif # HTTP/1.1 304 0.00 secs: 0 bytes ==> /apache_pb.gif # # Siege also supports Cache-control headers. Consider this server # response: Cache-Control: max-age=3 # That tells siege to cache the file for three seconds. While it # doesn't actually store the file, it will logically grab it from # its cache. In verbose output, it designates a cached resource # with (c): # # HTTP/1.1 200 0.25 secs: 159 bytes ==> GET /expires/ # HTTP/1.1 200 1.48 secs: 498419 bytes ==> GET /expires/Otter_in_Southwold.jpg # HTTP/1.1 200 0.24 secs: 159 bytes ==> GET /expires/ # HTTP/1.1 200(C) 0.00 secs: 0 bytes ==> GET /expires/Otter_in_Southwold.jpg # # NOTE: with color enabled, cached URLs appear in green # # ex: cache = true # cache = false # # Connection directive. Options "close" and "keep-alive" Starting with # version 2.57, siege implements persistent connections in accordance # to RFC 2068 using both chunked encoding and content-length directives # to determine the page size. # # To run siege with persistent connections set this to keep-alive. # # CAUTION: Use the keep-alive directive with care. # DOUBLE CAUTION: This directive does not work well on HPUX # TRIPLE CAUTION: We don't recommend you set this to keep-alive # ex: connection = close # connection = keep-alive # connection = close # # Default number of simulated concurrent users. This feature # corresponds with the -c NUM / --concurrent=NULL command line # argument. The command line takes precedent over this directive. # # ex: concurrent = 50 # concurrent = 25 # # Default duration of the siege. The right hand argument has a modifier # which specifies the time units, H=hours, M=minutes, and S=seconds. If # a modifier is not specified, then minutes are assumed. # # NOTE: The command line argument -t5m / --time=5m takes precedence # over this directive # # ex: time = 50M # # time = # # Repetitions. The length of siege may be specified in client reps # rather than a time duration. Instead of specifying a time span, # you can tell each siege instance to hit the server X number of times. # So if you chose 'reps = 20' and you've selected 10 concurrent users, # then siege will hit the server 200 times. # # NOTE: The command line argument -r 5 / --reps=5 / --reps=once takes # precedence over this directive # # ex: reps = 20 # # reps = # # URLs file: Set at configuration time, the default URLs file is # PREFIX/etc/urls.txt So if you configured the siege build with # --prefix=/usr/local then the urls.txt file is installed in # /usr/local/etc/urls.txt. Use the "file = " directive to configure # an alternative URLs file. You may use environment variables # as shown in the examples below: # # ex: file = /export/home/jdfulmer/MYURLS.txt # file = $HOME/etc/urls.txt # file = $URLSFILE # # NOTE: The command line -f FILE / --file=FILE takes precedence over # this directive # # file = # # Default URL, this is a single URL that you want to test. This is # usually set at the command line with the -u option. When used, this # option overrides the urls.txt (-f FILE/--file=FILE) option. You will # HAVE to comment this out for in order to use the urls.txt file option. # # NOTE: you may do the same thing by passing a URL to siege at the # command line: # $ siege -c10 -r10 "www.joedog.org/" # # Generally, it's a good idea to wrap a command line URL in quotes # # ex: url = https://shemp.whoohoo.com/docs/index.jsp # # url = # # Default delay between each request by a single thread. This value # is not included in the request time. If a thread sleeps for two # seconds then completes a 0.5 second request, the time of the request # is 0.5 seconds, not 2.5 seconds. # # NOTE: the command line -d NUM / --delay=NULL takes precedent over # this directive # # ex: delay = 1.5 # delay = 5 # delay = 0.0 # # Connection timeout value. Set the value in seconds for socket # connection timeouts. The default value is 30 seconds. # # ex: timeout = 30 # # timeout = # # Session expiration: This directive allows you to delete all cookies # after you pass through the URLs. This means siege will grab a new # session with each run through its URLs. The default value is false. # # ex: expire-session = true # # expire-session = # # Cookie support: by default siege accepts cookies. This directive is # available to disable that support. Set cookies to 'false' to refuse # cookies. Set it to 'true' to accept them. The default value is true. # If you want to maintain state with the server, then this MUST be set # to true. # # ex: cookies = false # # cookies = # # Failures: This is the number of total connection failures allowed # before siege aborts. Connection failures (timeouts, socket failures, # etc.) are combined with 400 and 500 level errors in the final stats, # but those errors do not count against the abort total. If you set # this total to 10, then siege will abort after ten socket timeouts, # but it will NOT abort after ten 404s. This is designed to prevent a # run-away mess on an unattended siege. # # The default value is 1024 # # ex: failures = 50 # # failures = # # Internet simulation. If true, siege clients will hit the URLs in the # urls.txt file randomly, thereby simulating internet usage. If false, # siege will run through the urls.txt file in order from first to last # and back again. # # ex: internet = true # internet = false # # Default benchmarking value, If true, there is NO delay between server requests, # siege runs as fast as the web server and the network will let it. Set this to # false for load testing. # # ex: benchmark = true # benchmark = false # # User-agent: With this directive you can set the siege user-agent The default # agent is: JoeDog/1.40 [en] (X11; I; Siege #.##) With this directive, you can # mimic various browsers or you can make up something fun. Limey, our English # bulldog, was recovering from minor surgery at the time we added this feature # so we like to dedicate the example in his honor: # # ex: user-agent = Limey The Bulldog # # Other examples harvested from our logs: # Chrome: Mozilla/5.0 (Windows NT 6.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/47.0.2526.111 Safari/537.36k # IE 6: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322) # IE 7: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30) # IE 8: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1) # IE 9: Mozilla/5.0 (MSIE 9.0; Windows NT 6.1; Trident/5.0) # IE 10: Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.2; Trident/6.0) # FF 3.6: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.4410) Gecko/20110902 Firefox/3.6 # FF 9: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:9.0) Gecko/20100101 Firefox/9.0 # Safari: Mozilla/5.0 (Windows; U; Windows NT 6.1; tr-TR) AppleWebKit/533.20.25 Version/5.0.4 Safari/533.20.27 # Opera: Opera/9.80 (Windows NT 6.1; U; es-ES) Presto/2.9.181 Version/12.00 # iPhone: Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3_2 like Mac OS X; en-us) Version/5.0.2 Mobile/8H7 Safari/6533.18.5 # Android: Mozilla/5.0 (Linux; U; Android 2.3; en-us) AppleWebKit/999+ (KHTML, like Gecko) Safari/999.9 # Kindle: Mozilla/5.0 (Linux; U; en-US) AppleWebKit/528.5+ (KHTML, like Gecko, Safari/528.5+) Version/4.0 Kindle/3.0 # Goolge: Googlebot/2.1 (+http://www.googlebot.com/bot.html) # Yahoo: Mozilla/5.0 (compatible; Yahoo! Slurp; http://help.yahoo.com/help/us/ysearch/slurp) # # user-agent = # # Accept-encoding. This option allows you to report to the server the # various content-encodings you support. If you're not using HTML parser # (parser = false), then you can specify any encoding. When the parser is # disabled, siege just reads the content then immediately discards it. # However, if you use the parser, then you MUST set a supported content # encoder. Currently, siege supports two: deflate and gzip. # # NOTE: We plan to add support for brotli and bzip2; you can hasten # that effort by showing us some love: # # # ex: accept-encoding = # accept-encoding = gzip # accept-encoding = deflate # accept-encoding = gzip, deflate accept-encoding = gzip, deflate # # URL escaping was first added to version 3.0.3. It was considered # experimental until version 3.0.9 when it was turned on by default. # # This feature remains in siege as a mechanism to turn off escape # encoding. Here is an example of two URLs. The first has spaces # included in the file name and in the second those spaces were # encoded to %20. # # http://www.joedog.org/jukebox.php?band=the days of new # http://www.joedog.org/jukebox.php?band=the%20days%20of%20the%20new # # ex: url-escaping = false # url-escaping = true # # WWW-Authenticate credentials. Currently siege supports two types # of HTTP authentication: digest and basic. It has partial support for # Microsoft's NTLM but in practice that only works with the -g/--get # option. (as of siege 3.1.1) # # When siege makes a request for a page that requires user authentication, # it will search its logins for a matching realm. If it finds credentials # for a realm, it will attempt to login with that username and password. # # If it fails to match the realm, it will use its default login credentials # (which are designated with the keyword "all" or no specified realm. # # If you do not supply a realm, then it will default to "all" which instructs # siege to send as default. # # You may enter many logins with each on its own separate line. The only # limitation is memory and realm name. You can't use the same realm name # more than once. # # ex: login = jdfulmer:topsecret:Admin # login = jeff:supersecret:all # login = jeff:supersecret # # login = # # Login URL. This feature was designed to provide a login url in order # to kick off a session with form-based authentication. If this directive # has a value, then every siege client will make a request to it BEFORE it # uses its list of URLs. # # NOTE: siege will only make this request once. After it's hit this URL # it will not request it again until its next start-up. # # ex: login-url = http://eos.joedog.org/login.jsp POST name=jeff&pass=foo # # Starting with version 2.69, siege can make multiple login request on a # thread-by-thread basis. As each thread is created it grab the next unused # login URL in the list. If you schedule more threads than login-urls, new # threads will wrap back around and loop back through the list. # # ex: login-url = http://www.haha.com/login.php?name=homer&pass=whoohoo # login-url = http://www.haha.com/login.php?name=marge&pass=ohhomie # login-url = http://www.haha.com/login.php?name=bart&pass=eatMyShorts # # login-url = # # FTP login - There are two ways to login to an ftp server with siege. You # can use this directive to set login credentials or you can set them in a # URL in RFC-1738 format: ftp://user:pass@host.com/ink.jpg # # The format for this directive is USER:PASS:HOST separated by colon ':' # The host field is optional. If you don't set a host, then siege will send # the same user:pass to every FTP server. You may use this directive MULTIPLE # times. Siege will store each instance in memory and send the appropriate # credentials at login time depending on the hostname in the URL. # # ex: ftp-login: jdfulmer:whoohoo:ftp.joedog.org # ftp-login: jdfulmer:password # # ftp-login = # # FTP unique - This directive determines whether siege will upload files with # the same name (and therefore overwrite whatever is on disk) or upload files # each with a unique name. If true, siege will rewrite the file name with a # timestamp in its name, i.e., p.jpg => p-3086060432.jpg # # The default value is true. # # ex: unique = false # unique = true # # SSL-cert: This optional feature allows you to specify a path to a client # certificate. It is not neccessary to specify a certificate in order to use # https. If you don't know why you would want one, then you probably don't need # it. Use openssl to generate a certificate and key with the following command: # # $ openssl req -nodes -new -days 365 -newkey rsa:1024 -keyout key.pem -out cert.pem # # Specify a path to cert.pem as follows: # ex: ssl-cert = /home/jeff/.certs/cert.pem # # ssl-cert = # # SSL-key: Use this option to specify the key you generated with the command # above. ex: ssl-key = /home/jeff/.certs/key.pem You may actually skip this # option and combine both your cert and your key in a single file: # $ cat key.pem > client.pem # $ cat cert.pem >> client.pem # Now set the path for ssl-cert: # ex: ssl-cert = /home/jeff/.certs/client.pem # (in this scenario, you comment out ssl-key) # # ssl-key = # # SSL-timeout: This option sets a connection timeout for the ssl library # ex: ssl-timeout = 30 # # ssl-timeout = # # SSL-ciphers # You can use this feature to select a specific ssl cipher for HTTPs. To # view the ones available with your library run the following command: # # $ openssl ciphers # # ex: ssl-ciphers = EXP-RC4-MD5 # # ssl-ciphers = # # Proxy Host: You can use siege to test a proxy server but you need to # configure it to use one. You'll need to name a proxy host and the port # it's listening on. The settings are proxy-host and proxy-port. The # following example shows how to use them: # # ex: proxy-host = proxy.joedog.org # proxy-port = 3123 # # proxy-host = # proxy-port = # # Proxy-Authenticate: When siege hits a proxy server which requires # username and password authentication, it will this username and # password to the server. The format is username, password and optional # realm each separated by a colon. You may enter more than one proxy-login # as long as each one has a different realm. If you do not enter a realm, # then siege will send that login information to all proxy challenges. If # you have more than one proxy-login, then scout will attempt to match the # login to the realm. # # ex: proxy-login: jeff:secret:corporate # proxy-login: jeff:whoohoo # # proxy-login = # # Redirection support. By default, siege will follow a HTTP redirect to the # Location provided by the server. If it's parser is enabled, then it will # also follow and HTML META redirect. If, for some reason, you do not wish # wish to follow redirects, then set this redirective to false. # # NOTE: redirect support is enabled by default. # # ex: follow-location = false # # follow-location = # # end of siegerc _EOF_ echo "New configuration template added to $HOME/.siege" echo "Run siege -C to view the current settings in that file" exit